Distance Synergy of MoS2‐Confined Rhodium Atoms for Highly Efficient Hydrogen Evolution

Perturbing the electronic structure of the MoS₂ basal plane by confining heteroatoms offers the opportunity to trigger in‐plane activity for the hydrogen evolution reaction (HER). The key challenge consists of inducing the optimum HER activity by controlling the type and distribution of confined atoms. A distance synergy of MoS₂‐confined single‐atom rhodium is presented, leading to an ultra‐high HER activity at the in‐plane S sites adjacent to the rhodium. By optimizing the distance between the confined Rh atoms, an ultra‐low overpotential of 67 mV is achieved at a current density of 10 mA cm^?2 in acidic solution. Experiments and first‐principles calculations demonstrate a unique distance synergy between the confined rhodium atoms in tuning the reactivity of neighboring in‐plane S atoms, which presents a volcanic trend with the inter‐rhodium distance. This study provides a new strategy to tailor the activity of MoS₂ surface via modulating the distance between confined single atoms.     

Activation of MoS2 Basal Planes for Hydrogen Evolution by Zinc

Molybdenum disulfide (MoS₂) has been widely studied as a potential earth‐abundant electrocatalyst for the hydrogen‐evolution reaction (HER). Defect engineering and heteroelemental doping are effective methods to enhance the catalytic activity in the HER, so exploring an efficient route to simultaneously achieve in‐plane vacancy engineering and elemental doping of MoS₂ is necessary. In this study, Zinc, a low‐cost and moderately active metal, has been used to realize this strategy by generation of sulfur vacancies and zinc doping on MoS₂ in one step. Density functional theory calculations reveal that the zinc atoms not only lower the formation energy of S vacancies, but also help to decrease ΔG_H of S‐vacancy sites near the Zn atoms. At an optimal zinc‐reduced MoS₂ (Zn@MoS₂) example, the activated basal planes contribute to the HER activity with an overpotential of ?194 mV at 10 mA cm^?2 and a low Tafel slope of 78 mV/dec.     

Gold Nanoclusters Grown on MoS2 Nanosheets by Pulsed Laser Deposition: An Enhanced Hydrogen Evolution Reaction

Au nanoparticles were decorated on a 2H MoS₂ surface to form an Au/MoS₂ composite by pulse laser deposition. Improved HER activity of Au/MoS₂ is evidenced by a positively shifted overpotential (−77 mV) at a current density of −10 mA cm⁻² compared with pure MoS₂ nanosheets. Experimental evidence shows that the interface between Au and MoS₂ provides more sites to combine protons to form an active H atom. The density functional theory calculations found that new Au active sites on the Au and MoS₂ interface with improved conductivity of the whole system are essential for enhancing HER activity of Au/MoS₂.     

Tuning the Intrinsic Activity and Electrochemical Surface Area of MoS2 via Tiny Zn Doping: Toward an Efficient Hydrogen Evolution Reaction (HER) Catalyst

Molybdenum sulfide (MoS₂) is considered as an alternative material for commercial platinum catalysts for electrocatalytic hydrogen evolution reaction (HER). Improving the apparent HER activity of MoS₂ to a level comparable to that of Pt is an essential premise for the commercial use of MoS₂. In this work, a Zn-doping strategy is proposed to enhance the HER performance of MoS₂. It is shown that tiny Zn doping into MoS₂ leads to the enhancement of the electrochemical surface area, increases in proportion of HER active 1T phase in the material and formation of catalytic sites of higher intrinsic activity. These benefits result in a high-performance HER electrocatalyst with a low overpotential of 190 mV(@10 mA cm⁻²) and a low Tafel slope of 58 mV dec⁻¹. The origin for the excellent electrochemical performance of the doped MoS₂ is rationalized with both experimental and theoretical investigations.     

Size‐Dependent Enhancement of Electrocatalytic Oxygen‐Reduction and Hydrogen‐Evolution Performance of MoS2 Particles

MoS₂ particles with different size distributions were prepared by simple ultrasonication of bulk MoS₂ followed by gradient centrifugation. Relative to the inert microscale MoS₂, nanoscale MoS₂ showed significantly improved catalytic activity toward the oxygen‐reduction reaction (ORR) and hydrogen‐evolution reaction (HER). The decrease in particle size was accompanied by an increase in catalytic activity. Particles with a size of around 2 nm exhibited the best dual ORR and HER performance with a four‐electron ORR process and an HER onset potential of ?0.16 V versus the standard hydrogen electrode (SHE). This is the first investigation on the size‐dependent effect of the ORR activity of MoS₂, and a four‐electron transfer route was found. The exposed abundant Mo edges of the MoS₂ nanoparticles were proven to be responsible for the high ORR catalytic activity, whereas the origin of the improved HER activity of the nanoparticles was attributed to the plentiful exposed S edges. This newly discovered process provides a simple protocol to produce inexpensive highly active MoS₂ catalysts that could easily be scaled up. Hence, it opens up possibilities for wide applications of MoS₂ nanoparticles in the fields of energy conversion and storage.     

Large‐scale Two‐dimensional MoSx Catalyst Prepared under Mild Conditions for Enhancing Electrocatalytic Hydrogen Evolution Reaction

As an electrocatalyst with abundant resources and great potential, molybdenum disulfide is regarded as one of the most likely alternatives to expensive noble‐metals catalysts. However, it is still a challenge to achieve large scale production of few‐layer MoS₂ with enhancing activity of electrocatalytic hydrogen reaction at ambient conditions. Herein, we developed a simple environmentally friendly two‐step method, which included intercalation reaction and a subsequent electrochemical reduction reaction for mass preparation of defect‐rich desulfurized MoS_x (D?MoS_x) nanosheets with plentiful sulfur vacancies. The ratio of sulfur‐molybdenum atoms can be adjusted from 2 : 1 to 1.4 : 1 by regulating the desulfurization voltage. It was found that the HER catalytic activity of the D?MoS_x was enhanced compared with that of pristine MoS₂ (P?MoS₂), the current density of D?MoS_x (desulfurization at ?1.0 V) at ?0.3 V versus RHE was about 169% of the P?MoS₂, and the Tafel slope decreased to 136 mV dec^?1. This method can be widely applied to large‐scale preparation of other two‐dimensional materials.     

Ligand Modulation of Active Sites to Promote Cobalt-Doped 1T-MoS2 Electrocatalytic Hydrogen Evolution in Alkaline Media

Highly efficient hydrogen evolution reaction (HER) electrocatalyst will determine the mass distributions of hydrogen-powered clean technologies, while still faces grand challenges. In this work, a synergistic ligand modulation plus Co doping strategy is applied to 1T−MoS₂ catalyst via CoMo-metal-organic frameworks precursors, boosting the HER catalytic activity and durability of 1T−MoS₂. Confirmed by Cs corrected transmission electron microscope and X-ray absorption spectroscopy, the polydentate 1,2-bis(4-pyridyl)ethane ligand can stably link with two-dimensional 1T−MoS₂ layers through cobalt sites to expand interlayer spacing of MoS₂ (Co−1T−MoS₂-bpe), which promotes active site exposure, accelerates water dissociation, and optimizes the adsorption and desorption of H in alkaline HER processes. Theoretical calculations indicate the promotions in the electronic structure of 1T−MoS₂ originate in the formation of three-dimensional metal-organic constructs by linking π-conjugated ligand, which weakens the hybridization between Mo-3d and S-2p orbitals, and in turn makes S-2p orbital more suitable for hybridization with H-1s orbital. Therefore, Co−1T−MoS₂-bpe exhibits excellent stability and exceedingly low overpotential for alkaline HER (118 mV at 10 mA cm⁻²). In addition, integrated into an anion-exchange membrane water electrolyzer, Co−1T−MoS₂-bpe is much superior to the Pt/C catalyst at the large current densities. This study provides a feasible ligand modulation strategy for designs of two-dimensional catalysts.     

Polyoxometalate derived p-n heterojunction for optimized reaction interface and improved HER

MoS₂ is a typical electrocatalyst for hydrogen evolution reaction (HER), but the HER activity is spoilt by intensive adsorption towards H*, which requires further improvement. For n-type MoS₂, the construction of p-n heterojunction with p-type MoO₃ can reverse this situation, because inner electronic field in p-n heterojunction can facilitate H* desorption. Based on this hypothesis, p-n heterojunction is built between MoS₂ and MoO₃ with polyoxometalate compound as precursor. The obtained MoO₃/MoS₂ exhibits excellent HER activity, which only requires 68 mV to obtain 10 mA/cm². With MoO₃/MoS₂ as cathode material and Zn slice as anode, Zn-H⁺ battery is assembled. Its open circuit voltage achieves 1.11 V with short circuit current 151.4 mA/cm². The peak power density of this Zn-H⁺ battery reaches 47.6 mW/cm². When discharge at 10 mA/cm², the specific capacity and energy density reach 728 mAh/g and 759 Wh/kg. In this process, H₂ production rate of Zn-H⁺ battery achieves 364 μmol/h with Faradic efficiency 97.8%. It realizes H₂ production and electricity generation simultaneously.     

Ultrasmall Cu7S4@MoS2 Hetero‐Nanoframes with Abundant Active Edge Sites for Ultrahigh‐Performance Hydrogen Evolution

Increasing the active edge sites of molybdenum disulfide (MoS₂) is an efficient strategy to improve the overall activity of MoS₂ for the hydrogen‐evolution reaction (HER). Herein, we report a strategy to synthesize the ultrasmall donut‐shaped Cu₇S₄@MoS₂ hetero‐nanoframes with abundant active MoS₂ edge sites as alternatives to platinum (Pt) as efficient HER electrocatalysts. These nanoframes demonstrate an ultrahigh activity with 200 mA cm^?2 current density at only 206 mV overpotential using a carbon‐rod counter electrode. The finding may provide guidelines for the design and synthesis of efficient and non‐precious chalcogenide nanoframe catalysts.     

The Core/Shell Structure P Doped MoS2@Ni3S2 Nanorods Array for High Current Density Hydrogen Evolution in Alkaline and Acidic Electrolyte

Electrocatalysis is the most promising strategy to generate clean energy H₂, and the development of catalysts with excellent hydrogen evolution reaction (HER) performance at high current density that can resist strong alkaline and acidic electrolyte environment is of great significance for practical industrial application. Therefore, a P doped MoS₂@Ni₃S₂ nanorods array (named P-NiMoS) was successfully synthesized through successive sulfuration and phosphorization. P-NiMoS presents a core/shell structure with a heterojunction between MoS₂ (shell) and Ni₃S₂ (core). Furthermore, the doping of P modulates the electronic structure of the P-NiMoS; the electrons transfer from the t_2g orbital of Ni element to the e_g empty orbital of Mo element through the Ni−S−Mo bond at the Ni₃S₂ and MoS₂ heterojunction, facilitating the hydrogen evolution reaction. As a result, P-NiMoS exhibits excellent HER activity; the overpotential is 290 mV at high current density of 250 mA cm⁻² in alkaline electrolyte, which is close to Pt/C (282 mV@250 mA cm⁻²), and P-NiMoS can stably evolve hydrogen for 48 h.     

Bifunctional Electrocatalyst with 0D/2D Heterostructure for Highly Efficient Hydrogen and Oxygen Generation

A novel MoS₂ quantum dots/CoSe₂ nanosheet (MoS₂ QDs/CoSe₂) hybrid with 0D/2D heterostructure has been developed. The CoSe₂ nanosheets (NSs) enable an excellent oxygen evolution reaction (OER) activity with increasing vacancy configuration on one hand, while the MoS₂ QDs serve as an eminent hydrogen evolution reaction (HER) catalyst on the other. By integrating MoS₂ QDs and CoSe₂ NSs, the hybrid exhibits excellent electrocatalytic performances in HER and OER. The unique 0D/2D hetero‐interface increases the exposed active sites and facilitates electron transfer, thereby boosting the electrocatalytic activity. Relatively low overpotentials of 82 mV and 280 mV are required to drive the current density of 10 mA/cm² for HER and OER, with corresponding Tafel slopes of 69 and 75 mV/dec, respectively. As such, this work provides an efficient yet simple approach to construct bifunctional electrocatalysts with enhanced activity and stability.     

High‐Resolution Electrochemical Mapping of the Hydrogen Evolution Reaction on Transition‐Metal Dichalcogenide Nanosheets

High‐resolution scanning electrochemical cell microscopy (SECCM) is used to image and quantitatively analyze the hydrogen evolution reaction (HER) catalytically active sites of 1H‐MoS₂ nanosheets, MoS₂, and WS₂ heteronanosheets. Using a 20 nm radius nanopipette and hopping mode scanning, the resolution of SECCM was beyond the optical microscopy limit and visualized a small triangular MoS₂ nanosheet with a side length of ca. 130 nm. The electrochemical cell provides local cyclic voltammograms with a nanoscale spatial resolution for visualizing HER active sites as electrochemical images. The HER activity difference of edge, terrace, and heterojunction of MoS₂ and WS₂ were revealed. The SECCM imaging directly visualized the relationship of HER activity and number of MoS₂ nanosheet layers and unveiled the heterogeneous aging state of MoS₂ nanosheets. SECCM can be used for improving local HER activities by producing sulfur vacancies using electrochemical reaction at the selected region.     

Heterostructures of NiFe LDH hierarchically assembled on MoS2 nanosheets as high-efficiency electrocatalysts for overall water splitting

Typically, rational interfacial engineering can effectively modify the adsorption energy of active hydrogen molecules to improve water splitting efficiency. NiFe layered double hydroxide (NiFe LDH) composite, an efficient oxygen evolution reaction (OER) catalyst, suffers from slow hydrogen evolution reaction (HER) kinetics, restricting its application for overall water splitting. Herein, we construct the hierarchical MoS₂/NiFe LDH nanosheets with a heterogeneous interface used for HER and OER. Benefiting the hierarchical heterogeneous interface optimized hydrogen Gibbs free energy, tens of exposed active sites, rapid mass- and charge-transfer processes, the MoS₂/NiFe LDH displays a highly efficient synergistic electrocatalytic effect. The MoS₂/NiFe LDH electrode in 1 mol/L KOH exhibits excellent HER activity, only 98 mV overpotential at 10 mA/cm². Significantly, when it assembled as anode and cathode for overall water splitting, only 1.61 V cell voltage was required to achieve 10 mA/cm² with excellent durability (50 h).     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维（CNFs）作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼（MoS₂）纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS₂纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS₂/CNFs杂化材料的电催化析氢性能（HER）进行研究,研究表明近似皮芯结构的MoS₂/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110 mV·dec^-1。     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维(CNFs)作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼(MoS_2)纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS_2纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS_2/CNFs杂化材料的电催化析氢性能(HER)进行研究,研究表明近似皮芯结构的MoS_2/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110m V·dec~(-1)。     

High-Resolution Electrochemical Mapping of the Hydrogen Evolution Reaction on Transition-Metal Dichalcogenide Nanosheets

High-resolution scanning electrochemical cell microscopy (SECCM) is used to image and quantitatively analyze the hydrogen evolution reaction (HER) catalytically active sites of 1H-MoS₂ nanosheets, MoS₂, and WS₂ heteronanosheets. Using a 20 nm radius nanopipette and hopping mode scanning, the resolution of SECCM was beyond the optical microscopy limit and visualized a small triangular MoS₂ nanosheet with a side length of ca. 130 nm. The electrochemical cell provides local cyclic voltammograms with a nanoscale spatial resolution for visualizing HER active sites as electrochemical images. The HER activity difference of edge, terrace, and heterojunction of MoS₂ and WS₂ were revealed. The SECCM imaging directly visualized the relationship of HER activity and number of MoS₂ nanosheet layers and unveiled the heterogeneous aging state of MoS₂ nanosheets. SECCM can be used for improving local HER activities by producing sulfur vacancies using electrochemical reaction at the selected region.     

Hierarchical Nanoboxes Composed of Co9S8−MoS2 Nanosheets as Efficient Electrocatalysts for the Hydrogen Evolution Reaction

The development of hydrogen evolution catalysts based on nonprecious metals is essential for the practical application of water‐splitting devices. Herein, the synthesis of Co₉S₈?MoS₂ hierarchical nanoboxes (HNBs) as efficient catalysts for the hydrogen evolution reaction (HER) is reported. The surface of the hollow cubic structure was organized by CoMoS₄ nanosheets formed through the reaction of MoS₄^2? and Co²⁺ released from the cobalt zeolite imidazole framework (ZIF‐67) templates under reflux in a mixture of water/ethanol. The formation process for the CoMoS₄ HNB structures was characterized by TEM images recorded at various reaction temperatures. The amorphous CoMoS₄ HNBs were converted through sequential heat treatments into CoS_x?MoS₂ and Co₉S₈?MoS₂ HNBs. Owing to their unique chemical compositions and structural features, Co₉S₈?MoS₂ HNBs have a high specific surface area (124.6 m² g^?1) and superior electrocatalytic performances for the HER. The Co₉S₈?MoS₂ HNBs exhibit a low overpotential (η₁₀) of 106 mV, a low Tafel slope of 51.8 mV dec^?1, and long‐term stability in an acidic medium. The electrocatalytic activity of Co₉S₈?MoS₂ HNBs is superior to that of recently reported values, and these HNBs prove to be promising candidates for the HER.     

Interpretation of the difference of optimal Mo density in MoS<Subscript>2</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and MoS<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> HDS catalysts

The first part of this paper deals with the morphology of the MoS₂ phase and its oxide precursor, the MoO₃ phase, mainly from a geometrical point of view. After giving a brief review of the literature describing the structure of these compounds, Mo densities in both phases were calculated along various crystallographic planes. Further, using structural models recently proposed by others, Mo densities in MoS₂ were also calculated in the case of an epitactic growth on γ-Al₂O₃ and TiO₂ model surfaces. Then, the calculated Mo densities were compared with experimental results (Mo density when HDS activity is maximal) previously obtained for catalysts constituted of MoS₂ supported on a low SSA TiO₂, a high SSA TiO₂ and a conventional γ-alumina. It was suggested that either on alumina or titania the MoS₂ phase is growing as (100) MoS₂ planes. However, while on the alumina the optimal MoS₂ phase might be constituted of dispersed MoS₂ slabs covering only a part of the alumina surface (2.9–3.9 Mo atoms/nm²), on titania the optimal MoS₂ phase might be constituted of a uniform MoS₂ monolayer (5.2 atoms/nm² for the high SSA titania, which is equal to the Mo density of a perfect MoS₂ (100) plane). This difference may originate in the creation of a 'TiMoS' phase enhancing the S atoms mobility over Mo/TiO₂-sulfided catalysts. Indeed, while in the case of a γ-alumina carrier the active sites (labile S atoms) are located on the edge of MoS₂ slabs making the ratio Mo_edge/Mo_total a crucial parameter for the catalytic performances, in the case of a titania carrier the labile sulfur atoms might be statistically distributed all over the TiMoS active phase. Further, the higher Mo density observed over the high SSA titania (5.2 atoms/nm²) when compared to that over the low SSA titania (4.2 atoms/nm²) was supposedly due to the pH-swing method advantageously used to prepare the former carrier. Indeed, this method allows giving a solid with enhanced mechanical properties providing a good stability to the derived catalysts under experimental conditions. In addition, this TiO₂ carrier exhibits a great homogeneity, with a surface structure substantially uniform, which might be adequate for a long-range growth of (100) MoS₂ slabs.     

Tuning the Photo-electrochemical Performance of RuII-Sensitized Two-Dimensional MoS2

Covalently tethering photosensitizers to catalytically active 1T-MoS₂ surfaces holds great promise for the solar-driven hydrogen evolution reaction (HER). Herein, we report the preparation of two new Ru^II-complex-functionalized MoS₂ hybrids [Ru^II(bpy)₂(phen)]-MoS₂ and [Ru^II(bpy)₂(py)Cl]-MoS₂. The influence of covalent functionalization of chemically exfoliated 1T-MoS₂ with coordinating ligands and Ru^II complexes on the HER activity and photo-electrochemical performance of this dye-sensitized system was studied systematically. We find that the photo-electrochemical performance of this Ru^II-complex-sensitized MoS₂ system is highly dependent on the surface extent of photosensitizers and the catalytic activity of functionalized MoS₂. The latter was strongly affected by the number and the kind of functional groups. Our results underline the tunability of the photovoltage generation in this dye-sensitized MoS₂ system by manipulation of the surface functionalities, which provides a practical guidance for smart design of future dye-sensitized MoS₂ hydrogen production devices towards improved the photofuel conversion efficiency.     

Bottom-Up Synthesized MoS2 Interfacing Polymer Carbon Nanodots with Electrocatalytic Activity for Hydrogen Evolution

The preparation of an MoS₂–polymer carbon nanodot (MoS₂-PCND) hybrid material was accomplished by employing an easy and fast bottom-up synthetic approach. Specifically, MoS₂-PCND was realized by the thermal decomposition of ammonium tetrathiomolybdate and the in situ complexation of Mo with carboxylic acid units present on the surface of PCNDs. The newly prepared hybrid material was comprehensively characterized by spectroscopy, thermal means, and electron microscopy. The electrocatalytic activity of MoS₂-PCND was examined in the hydrogen evolution reaction (HER) and compared with that of the corresponding hybrid material prepared by a top-down approach, namely MoS₂-PCND(exf-fun), in which MoS₂ was firstly exfoliated and then covalently functionalized with PCNDs. The MoS₂-PCND hybrid material showed superior electrocatalytic activity toward the HER with low Tafel slope, excellent electrocatalytic stability, and an onset potential of −0.16 V versus RHE. The superior catalytic performance of MoS₂-PCND was rationalized by considering the catalytically active sites of MoS₂, the effective charge/energy-transfer phenomena from PCNDs to MoS₂, and the synergetic effect between MoS₂ and PCNDs in the hybrid material.