Catalytic activity of nickel(II), copper(II) and oxovanadium(II)‐dihydroindolone complexes towards homogeneous oxidation reactions

Three novel paramagnetic metal complexes (MH₂ID) of Ni²⁺, Cu²⁺ and VO²⁺ ions with 3‐hydroxy‐3,3’‐biindoline‐2,2’‐dione (dihydroindolone, H₄ID) were synthesized and characterized by different spectroscopic methods. The ligand (H₄ID) was synthesized via homocoupling reaction of isatin in presence of phenylalanine in methanol. Complexation of low valent Ni²⁺, Cu²⁺ ions and high valent VO²⁺ ions with H₄ID carried out in 1: 2 molar ratios. A comparison in the catalytic potential of paramagnetic complexes of low and high valent metal ion was explored in the oxidation processes of cis‐cyclooctene, benzyl alcohol and thiophene by an aqueous H₂O₂, as a green terminal oxidant, in the presence and absence of acetonitrile, as an organic solvent, at 85 °C. NiH₂ID, CuH₂ID and VOH₂ID show good catalytic activity, i.e. good chemo‐ and regioselectivity. VOH₂ID has the highest catalytic potential compared to both Ni²⁺‐ and Cu²⁺‐species in the same homogenous aerobic atmosphere. Catalytic oxidation of other alkenes and alcohols was also studied using NiH₂ID, CuH₂ID or VOH₂ID as a pre‐catalyst by an aqueous H₂O₂. A mechanistic pathway for those oxidation processes was proposed.     

Advanced oxidation processes for decolorization of aqueous solution containing acid red G azo dye

Some investigations concerning the decolorization of Acid Red G azo dye by photooxidation with hydrogen peroxide were performed. The influences of pH, oxidant concentration, and the presence of Fe²⁺ or other metal ions (Co²⁺, Cu²⁺, Ni²⁺, Mn²⁺) as potential catalysts, were investigated. The best results were obtained in the presence of ferrous ions in acid and neutral media. The other ions are not as effective as Fe²⁺ for dye decolorization. Co²⁺ and Cu²⁺ ions have a catalytic action, at low concentration, within a wide range of pH. Ni²⁺ and Mn²⁺ ions have no catalytic effect in photooxidation with hydrogen peroxide at acid Ni²⁺ and Mn²⁺ ions have no catalytic effect in photooxidation with hydrogen peroxide at acid pH values, but show a weak action in alkaline media.     

Stability studies on 1:1 or 1:3 stoichiometry complexes of hexaza tripods with zinc(II), copper(II), nickel(II) and cobalt(II)

The coordination properties of two C₃-symmetry hexaza tripods, 1,3,5-tri(2,5-diazahexyl)benzene (L1) and 1,3,5-tri(2,5-diazaheptyl)benzene (L2), towards Zn²⁺, Cu²⁺, Ni²⁺ and Co²⁺ ions, studied by potentiometric techniques, are reported. Both ligands form quite stable complexes either in a 1:1 or 1:3 M:L stoichiometry, presenting a preferential coordination order: Zn²⁺ < Cu²⁺ > Ni²⁺ > Co²⁺. It is observed that the different configurations of metal complexes are achieved due to the fact that tripodal ligands are flexible and not constrained into a rigid geometry.     

Schiff碱配合物的研究——Ⅸ.表面Schiff碱配合物对H2O2分解的催化作用

制备了两种表面Schiff碱及其Cu²⁺、Co²⁺、Ni²⁺、Zn²⁺配合物,考察了它们对H₂O₂分解的催化性能,其活性顺序为:Co²⁺>Cu²⁺>Ni²⁺>Zn²⁺,且与金属离子氧化还原电位有关。溶液的pH值增加有利于催化反应,有机配体的加入则对反应有所抑制。     

Characterization and reactivity of nanoscale La(Co,Cu)O3 perovskite catalyst precursors for CO hydrogenation

The characterization of La(Co,Cu)O₃ perovskites has been performed by several techniques including XRD, BET, H₂-TPR, O₂-TPO, TPRS, and the solids tested as catalysts for the hydrogenation of CO. The reducibility of the perovskites is strongly affected by the preparation route, calcination temperature, catalyst morphology, and the amount of remnant alkali. Compared with the citrate-derived perovskite, LaCoO₃ sample prepared by mechano-synthesis has various distinct Co³⁺ ions in perovskite lattice, which are reduced at different temperatures. Under typical conditions, the reduction of cobalt ions occurs in two consecutive steps: Co³⁺/Co²⁺ and Co²⁺/Co⁰, while the intra-lattice copper ions are directly reduced from Cu²⁺ to Cu⁰. The reducibility of cobalt ions is promoted by the presence of metallic copper, which is formed at a lower reduction temperature. The re-oxidation of the reduced lanthanum cobaltite perovskite could regenerate the original structure, whereas that of the reduced Co-Cu-based samples is less reversible under the same experimental conditions.The cobalt atom in the reduced perovskites plays an important role in the dissociation of CO, but the presence of a neighboring copper along with remnant sodium ions on the catalyst surface has remarkably affected the reactivity of cobalt for CO hydrogenation. The addition of copper into the perovskite framework leads to a change in the product distribution of CO hydrogenation and a decrease in reaction temperature. An increased copper content leads to a substantial decline in the rate of methanation and an increase in the formation of higher alcohols. A close proximity between cobalt and copper sites on the Na⁺-modified catalyst surface of the reduced nanocrystalline Co-Cu-based perovskites plays a crucial role in the synthesis of higher alcohols from syngas.     

Cu(II) immobilized on mesoporous organosilica as an efficient and reusable nanocatalyst for one‐pot Biginelli reaction under solvent‐free conditions

Cu(II) immobilized on mesoporous organosilica nanoparticles (Cu²⁺@MSNs‐(CO₂^?)₂) has been synthesized, as a inorganic–organic nanohybrid catalyst, through a post‐grafting approach. Its characterization is carried out by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Energy dispersive X‐ray (EDX), Thermogravimetric/differential thermal analyses (TGA‐DTA), and Nitrogen adsorption–desorption analysis. Cu²⁺@MSNs‐(CO₂^?)₂ exhibits high catalytic activity in the Biginelli reaction for the synthesis of a diverse range of 3, 4‐dihydropyrimidin‐2(1H)‐ones, under mild conditions. The anchored Cu(II) could not leach out from the surface of the mesoporous catalyst during the reaction and it has been reused several times without appreciable loss in its catalytic activity.     

Flow-injection chemiluminescence simultaneous determination of cobalt(II) and copper(II) using partial least squares calibration

A flow-injection chemiluminescence (CL) system is proposed for simultaneous determination of Co²⁺ and Cu²⁺ using partial least squares (PLS) calibration. This method is based on the fact that both Co²⁺ and Cu²⁺ catalyse the CL reaction of luminol-H₂O₂, and that their kinetic characteristics of Co²⁺ and Cu²⁺ are significantly different in the luminol-H₂O₂ system. The CL intensity was measured and recorder at different reaction times of luminol-H₂O₂Co²⁺Cu²⁺, and the obtained data were processed by the chemometric approach of partial least squares. The experimental calibration set was composed of 16 sample solutions using an orthogonal calibration design for two component mixtures. The proposed method offers the potential advantages of high sensitivity, simplicity and rapidity for Co²⁺ and Cu²⁺ determination, and was successfully applied to the simultaneous determination of both analytes in real water sample. The present paper demonstrated that the simultaneous determination of two metal ions without any prior separation has been possible using flow-injection CL system.     

Cu_xCo_(1-x)/Al_2O_3/FeCrAl整体式催化剂上甲苯催化燃烧(英文)

以FeCrAl合金薄片为基底,Al2O3浆料为过渡胶体,不同摩尔比的Cu、Co为催化活性组分,制备了一系列CuxCo1-x/Al2O3/FeCrAl(x=0-1)新型整体式催化剂.采用X射线粉末衍射(XRD),扫描电子显微镜(SEM),X光电子能谱(XPS)和程序升温还原(TPR)等手段对催化剂的结构进行了表征.在微型固定床反应器上评价了催化剂的催化甲苯燃烧性能.研究结果表明:在所制备的整体式催化剂上,当Cu含量比较低时,形成了Cu-Co-O固溶体;当Cu含量比较高时,可以测得CuO的衍射峰.催化剂表面颗粒大小和形貌与Cu、Co摩尔比密切相关.在催化剂表面,Co以Co2+和Co3+价态存在,而Cu主要以Cu2+价态存在.催化剂中的Cu可以改善Co的氧化还原性,从而有利于催化剂活性的提高.在所制备的催化剂中,Cu0.5Co0.5/Al2O3/FeCrAl催化剂具有最好的活性,甲苯在374oC可以完全催化燃烧消除.     

Copper(II) ion sensor based on electropolymerized undoped conducting polymers

A solid state copper(II) ion sensor is reported based on the application of electropolymerized undoped (neutral) polycarbazole (PCz) and polyindole (PIn) modified electrodes. The new sensor shows high selectivity to Cu²⁺ ions with a detection limit of 10^–5 M. PCz and PIn are formed respectively by the anodic oxidation of 50 mM carbazole and 5 mM indole monomers in dichloromethane containing 0.1 M tetrabutylammonium perchlorate on a platinum electrode using a single compartment cell. Potentiostatic polymerization of both the monomers are carried out at 1.3 V and 1.0 V vs. Ag/AgCl, respectively. Perchlorate ions were electrochemically removed from the polymer films by applying – 0.2 V vs. Ag/AgCl. Polymer-coated electrodes are incubated in 1 M KCl solution for 8 h followed by incubation in distilled water for 2 h before using as a metal ion sensor. The undoped PCz and PIn electrodes were found to be highly selective and sensitive for Cu²⁺ ions with little selectivity for Pb²⁺ and negligible response towards Ag⁺, Hg²⁺, Cu⁺, Ni²⁺, Co²⁺, Fe²⁺, Fe³⁺ or Zn²⁺. Potentiometric responses for Cu²⁺ ions are recorded for both the sensor electrodes together with a double-junction Ag/AgCl reference electrode. Calibration curves for Cu²⁺ are reported for both ion sensors. The polymer-modified electrodes were found to be stable for several weeks. Electronic Publication     

In Situ Fabrication of Inorganic/Organic Hybrid Based on Cu/Co‐ZIF and Cu2O

We successfully fabricate a well‐defined inorganic/organic hybrid Cu₂O@Cu/Co‐ZIF (ZIF=zeolitic imidazolate frameworks) by use of growth of dual‐metal Cu/Co‐ZIF on the obtained Cu₂O hollow spheres. The key point of the strategy is coupling the in situ self‐sacrificing template. Cu₂O and the coordination of metal ions (Cu⁺ and Co²⁺) with 2‐methylimidazole. This new hybrid was characterized by powder X‐ray diffraction, (scanning) transmission electron microscopy, energy‐dispersive spectroscopy mapping, in situ FT‐IR spectroscopy, UV/Vis diffuse reflection spectroscopy, N₂ sorption measurements, and electron spin resonance. It was evidenced that Cu/Co‐ZIF nanocrystals have been assembled to continuous shells surrounding the Cu₂O cores as well as in the voids between layers and inner pores. Cu₂O@Cu/Co‐ZIF exhibits visible light responsiveness and holds potential as narrow band gap semiconductor and visible photocatalyst.     

Structural studies on cadmium(II), cobalt(II), copper(II), nickel(II) and zinc(II) complexes of 1-malonyl-bis(4-phenylthiosemicarbazide)

Summary Several new complexes of the title ligand (H₂MPTS) with Co^II, Ni^II, Cu^II, and Cd^II have been prepared. Structural assignments of the complexes have been made based on elemental analysis, molar conductivity, magnetic moment and spectral (i.r.,¹H n.m.r., reflectance) studies. The compounds are non-conductors in dimethylsulphoxide. The neutral molecule is coordinated to the metal(II) sulphate as a bidentate ligandvia the two carbonyl groups. The ligand reacts with the metal(II) chlorides with the liberation of two hydrogen ions, behaving as a bianionic quadridentate (NONO) donor. Enolization is confirmed by the pH-titration of H₂ MPTS and its metal(II) complexes against NaOH. A distorted octahedral structure is proposed for the Cu^II complex, while a square planar structure is suggested for both Co^II and Ni^II complexes. The stoichiometry of the complexes formed in EtOH and buffer solutions, their apparent formation constants and the ranges for obedience to Beer's law are reported for Co^II, Ni^II and Cu^II ions. The ligand pK values are calculated. The antimicrobial activity of H₂ MPTS and its Co^II, Ni^II, Cu^II and Mn^II complexes is demonstrated.     

Sorption selectivity of cobalt(II), nickel(II), and copper(II) ions by KB-2E macroreticular carboxylic cation exchanger from aqueous-salt solutions of alkali metals

Sorption selectivity of copper(II), nickel(II), and cobalt(II) ions by KB-2E macroreticular carboxylic cation exchanger in the Na-form from dilute solutions was studied in the target concentration range (0.52.6) 103 M. The equilibrium distribution coefficients of Co²⁺, Ni²⁺, and Cu²⁺ were calculated. The role played by hydration of ions in their sorption by KB-2E cation exchangers is analyzed with consideration for IR spectroscopic, thermal analysis, and scanning electron microscopic data.     

A Schiff-base cross-linked supramolecular polymer containing diiminophenol compartments and its interaction with copper(II) ions

We report here the preparation of a Schiff-base linked organic polymer 1 based on linkages containing the potent supramolecular aggregator benzene-1,3,5-tricarboxamide, connected through 2,6-diiminophenol metal binding pockets into a cross-linked polymer. The morphological and physical properties of this material are studied using electron microscopy techniques, thermal analysis, NMR, fluorescence spectroscopy and gas adsorption studies. The interaction of the polymer 1 with Cu^II ions is then investigated by soaking the material with methanolic copper acetate solution, and studying the resulting aggregates using EDX microscopy and FTIR spectroscopy. A small-molecule model compound 2 is also prepared and crystallographically characterised to act as a spectroscopic comparison, providing strong evidence that 1 interacts with copper ions through a nucleation/seeding mechanism for the growth of microcrystalline copper acetate deposits, rather than via chemisorption of the copper ions within the diiminophenol binding pockets. Preliminary results suggest a similar mechanism for Co^II adsorption, while Zn^II ions exhibit a separate interaction mode.     

Rational Construction of Polymeric Cadmium(II) Benzimidazole for Transition Metal Ion Exchange

A 1D double‐helical coordination polymer {[Cd(pbbm)₂]₂(ClO₄)₄(H₂O)₂}_n ( 1 ) was successfully constructed by the reaction of Cd(ClO₄)₂ · 6H₂O with 1,1′‐(1,5‐pentanediyl)bis‐1H‐benzimidazole (pbbm). Interestingly, polymer 1 exhibits highly selective capacity for the ionic exchange of Zn²⁺ and Cu²⁺ over Co²⁺ and Ni²⁺ ions in the crystalline solid state when the crystals of 1 are immersed in the aqueous solutions of the perchlorate salts of Cu²⁺, Zn²⁺, Co²⁺, and Ni²⁺ ions, respectively, which indicates that central Cd^II ion exchange might be considered as being dominated by the coordination ability of metal ions to free functional groups, ionic radii of exchanged metal ions, and the solution concentration of adsorbed metal salts. The parent material‐ and ion‐exchange‐induced products are identified by FT‐IR spectroscopy, PXRD patterns as well as SEM and EDS measurements. In addition, the thermal stability of 1 was also investigated.     

Furfural Hydrogenation on Nickel‐promoted Cu‐containing Catalysts Prepared from Hydrotalcite‐Like Precursors

The nickel‐promoted Cu‐containing catalysts (Cu_xNi_y‐MgAlO) for furfural (FFR) hydrogenation were prepared from the hydrotalcite‐like precursors, and characterized by X‐ray powder diffraction, inductively‐coupled plasma atomic emission spectroscopy, N₂ adsorption‐desorption, UV‐Vis diffuse reflectance spectra and temperature‐programmed reduction with H₂ in the present work. The obtained catalysts were observed to exhibit a better catalytic property than the corresponding Cu‐MgAlO or Ni‐MgAlO samples in FFR hydrogenation, and the CuNi‐MgAlO catalyst with the actual Cu and Ni loadings of 12.5 wt% and 4.5 wt%, respectively, could give the highest FFR conversion (93.2%) and furfuryl alcohol selectivity (89.2%). At the same time, Cu⁰ species from the reduction of Cu²⁺ ions in spinel phases were deduced to be more active for FFR hydrogenation.     

An Electrochemical Sensor for the Detection of Cu2+ Based on Gold Nanoflowers‐modifed Electrode and DNAzyme Functionalized Au@MIL‐101 (Fe)

In this study, we developed an electrochemical sensor for sensitive detection of Cu²⁺ based on gold nanoflowers (AuNFs)‐modified electrode and DNAzyme functionalized Au@MIL‐101(Fe) (MIL: Materials of Institute Lavoisier). The AuNFs‐modified indium tin oxide modified conductive glass electrode(AuNFs/ITO) prepared via electrodeposition showed improved electronic transport properties and provided more active sites to adsorb large amounts of oligonucleotide substrate (DNA1) via thiol‐gold bonds. The stable Au@MIL‐101(Fe) could guarantee the sensitivity because of its intrinsic peroxidase mimic property, while the Cu²⁺‐dependent DNA‐cleaving DNAzyme linked to Au@MIL‐101(Fe) achieved the selectivity toward Cu²⁺. After the DNAzyme substrate strand (DNA2) was cleaved into two parts due to the presence of Cu²⁺, the oligonucleotide fragment linked to MIL‐101(Fe) was able to hybridize with DNA1 adsorbed onto the surface of AuNFs/ITO. Due to the peroxidase‐like catalytic activity of MIL‐101(Fe) and the affinity recognition property of DNAzyme toward Cu²⁺, the electrochemical biosensor showed a sensitive detection range from 0.001 to 100 μM, a detection limit of 0.457 nM and a high selectivity, demonstrating its potential for Cu²⁺ detection in real environmental samples.     

Highly Stable Copper(I)–Thiacalix[4]arene-Based Frameworks for Highly Efficient Catalysis of Click Reactions in Water

Environmentally friendly metal–organic frameworks (MOFs) have gained considerable attention for their potential use as heterogeneous catalysts. Herein, two Cu^I-based MOFs, namely, [Cu₄Cl₄L] ⋅ CH₃OH ⋅ 1.5 H₂O ( 1-Cl ) and [Cu₄Br₄L] ⋅ DMF ⋅ 0.5 H₂O ( 1-Br ), were assembled with new functionalized thiacalix[4]arenes (L) and halogen anions X⁻ (X=Cl and Br) under solvothermal conditions. Remarkably, catalysts 1-Cl and 1-Br exhibit great stability in aqueous solutions over a wide pH range. Significantly, MOFs 1-Cl and 1-Br , as recycled heterogeneous catalysts, are capable of highly efficient catalysis for click reactions in water. The MOF structures, especially the exposed active Cu^I sites and 1D channels, play a key role in the improved catalytic activities. In particular, their catalytic activities in water are greatly superior to those in organic solvents or even in mixed solvents. This work proposes an attractive route for the design and self-assembly of environmentally friendly MOFs with high catalytic activity and reusability in water.     

Horseradish peroxidase‐based hybrid nanoflowers with enhanced catalytical activities for polymerization reactions of phenol derivatives

Catalytic activity and stability of HRP‐Cu²⁺ hybrid nanoflowers (hCu‐NFs) in the polymerization reactions of phenol derivatives was investigated. It was observed that the catalytic activity and stability of hybrid nanoflowers on the polymerization of the phenol derivatives was considerably higher compared to free Horseradish peroxidase (HRP) enzyme. The hCu‐NFs effectively polymerized phenolic compounds as a novel nanobiocatalyst and led to polymers having quite high yields, molecular weights, and thermal stabilities compared to free HRP enzyme. The hCu‐NFs provide substantial repeated use and showed some degree of catalytic activity even after fourth cycle experiment in the polymerization reactions.     

A Facile Process for the Preparation of Three‐Dimensional Hollow Zn(OH)2 Nanoflowers at Room Temperature

A facile strategy has been developed to synthesize double‐shelled Zn(OH)₂ nanoflowers (DNFs) at room temperature. The nanoflowers were generated via conversion of Cu₂O nanoparticles (NPs) using ZnCl₂ and Na₂S₂O₃ by a simple process. Outward diffusion of the Cu²⁺, produced by an oxidation process on the surface of NPs, and the inward diffusion of Zn²⁺ by coordination and migration, eventually lead to a hollow cavity in the inner NPs with a double‐shelled 3D hollow flower shapes. The thickness of the inner and outer shells is estimated to be about 20 nm, and the thickness of nanopetals is about 7 nm. The nanoflowers have large surface areas and excellent adsorption properties. As a proof of potential applications, the DNFs exhibited an excellent ability to remove organic molecules from aqueous solutions.     

Synthesis,structure, and solvent-extraction properties of tridentate oxime ligands and their cobalt(II), nickel(II), copper(II), zinc(II) complexes

Synthesis of four different types of ligands Ar[COC(NOH)R] _n (Ar = biphenyl, n = 1, HL¹; Ar = biphenyl, n = 2, H₂L²; Ar = diphenylmethane, n = 1, HL³; Ar = diphenylmethane, n = 2, H₂L⁴; R = furfurylamine in all ligands) and their dinuclear Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ complexes is reported herein. These compounds were characterized by elemental analysis, ICP-OES, FT-IR spectra, and magnetic susceptibility measurements. The ligands were further characterized by ¹H NMR. The results suggest that dinuclear complexes of HL¹ and HL³ have a metal to ligand mole ratio of 2: 2 and dinuclear complexes H₂L² and H₂L⁴ have a metal to ligand mole ratio of 2: 1. Square pyramidal or octahedral structures are proposed for complexes of oxime ligands. Furthermore, extraction abilities of the four ligands were also evaluated in chloroform using selected transition metal picrates such as Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺. The ligands show strong binding ability towards Hg²⁺ and Cu²⁺ ions.