Catalytic Selective Dihydrosilylation of Internal Alkynes Enabled by Rare‐Earth Ate Complex

Hydrosilylation of alkynes generally yield vinylsilanes, which are inert to the further hydrosilylation because of the steric effects. Reported here is the first successful dihydrosilylation of aryl‐ and silyl‐substituted internal alkynes enabled by a rare‐earth ate complex to yield geminal bis‐ and tris(silanes), respectively. The lanthanum bis(amido) ate complex supported by an ene‐diamido ligand proved to be the ideal catalyst for this unprecedented transformation, while the same series of yttrium and samarium alkyl and samarium bis(amido) ate complexes exhibited poor activity and selectivity, indicating significant effects of the ionic size and ate structure of the rare‐earth catalysts.     

Use of group 4 bis(sulfonamido) complexes in the intramolecular hydroamination of alkynes and allenes

Titanium tetrakis(amido) complexes catalyze the intramolecular hydroamination of alkynes and allenes more efficiently than Cp-based species. We report here that electron-withdrawing and sterically demanding bis(sulfonamido) ligands lead to enhanced catalytic activity. Zirconium analogues have also been prepared, and the tosyl-substituted complex 20 has been structurally characterized. As in the titanium series, bis(sulfonamido) zirconium catalysts are more efficient in the intramolecular hydroamination of allenes than bis(cyclopentadienyl) complex Cp(2)ZrMe(2) (23). Furthermore, these compounds transform 1,3-disubstituted aminoallenes with high stereoselectivity to the Z-allylamines and allow the hydroamination of a trisubstituted allene. Titanium bis(sulfonamido) imido complex 27 was synthesized. It converts aminoallene 10 to cylic imine 11 with a rate comparable to that of tetrakis(amide) 15, supporting the hypothesis of a catalytically active titanium imido intermediate.     

Amidate complexes of titanium and zirconium: a new class of tunable precatalysts for the hydroamination of alkynes

A series of bis(amidate)group 4-bis(amido) complexes have been prepared, characterized and have been shown to be highly tunable precatalysts for both the intra- and intermolecular hydroamination of alkynes.     

An easy-to-use, regioselective, and robust bis(amidate) titanium hydroamination precatalyst: mechanistic and synthetic investigations toward the preparation of tetrahydroisoquinolines and benzoquinolizine alkaloids

Amidate-supported titanium amido complexes are efficient and regioselective precatalysts for intermolecular hydroamination of terminal alkynes with primary amines. The synthesis and characterization of the first bis(amidate)-supported titanium-imido complex is reported. Its role as the active catalytic species is suggested in the course of product distribution studies using deuterated substrates. The bis(amidate)-supported precatalysts exhibit good functional-group tolerance, even performing hydroaminations in the presence of ester and amide groups. This functional-group tolerance was exploited in the synthesis of a variety of 1-substituted tetrahydroisoquinoline alkaloids and a one-pot hydroaminative procedure for the high yielding preparation of the benzo[a]quinolizine skeleton.     

Intramolecular enantioselective hydroamination catalyzed by rare earth binaphthylamides

Asymmetric intramolecular hydroamination reaction is a stately way to prepare chiral nitrogen-containing heterocyclic compounds. We report in this account our personal contribution in this field with the synthesis of chiral amido rare-earth complexes. A new family of structurally defined heterobimetallic rare earth lithium ate complexes based on N-substituted binaphthylamido ligands was discovered that promoted the hydroamination/cyclization of aminoolefins with up to 87% ee.Neutral rare earth amido and amido alkyl complexes could also be prepared and led to very active species. A more simple and reliable synthetic procedure was discovered towards the preparation of heterobimetallic rare earth amido alkyl ate complexes. They proved to be also active and enantioselective catalysts, as a good compromise between efficiency and practicability issues.     

Unusual complex chemistry of rare-Earth elements: large ionic radii-small coordination numbers

Because of their large ionic radii and relatively low oxidation states rare-earth elements generally form complexes which have high coordination numbers and weak metal-ligand bonds. They are often not suitable for homogeneous catalysis on account of their instability of configuration in solution. Complexes of the corresponding metal atoms with low coordination numbers may be an improvement. This type of complex can be obtained in the classical way by the introduction of bulky ligands, and recently, they were also prepared in reactions with ligand groups which offer remarkable metal-ligand bond features. This concept is demonstrated for complexes with bulky bis(trimethylsilyl)amido ligands [N(SiMe(3))(2)](-) and "slim" phosphoraneiminato ligands (NPR(3)(-)). Their suitability as catalysts for the ring-opening polymerization of lactones is reported as well.     

Mild procedure for the catalytic bis(stannylation) of alkynes with hexaalkylditins

[reaction: see text] Bis(stannylation) of terminal alkynes is achieved through the use of a palladium-isonitrile catalyst complex using a hexaalkylditin as a stannyl group transfer reagent in an atom-efficient and mild catalytic process. Functional group tolerance is good, allowing the presence of amine, carbamate, silyl, ester, and ether moieties. An activated internal alkyne also underwent bis(stannylation) in moderate yield, allowing access to symmetrical bis(alkenyl)stannanes.     

Tris[bis(trimethysilyl)amido]zinkate von Lithium und Calcium

Tris[bis(trimethylsilyl)amido]zincates of Lithium and Calcium Calcium-bis[bis(trimethylsilyl)amide] and Bis[bis(trimethylsilyl)amido]zinc yield in 1,2-dimethoxyethane quantitatively Calcium-bis{tris[bis(trimethylsilyl)- amido]zincate} · 3DME. When THF is chosen as a solvent, the two reactants and the zincate form a temperature-independent equilibrium, whereas in benzene no reaction occurs. The tris[bis(trimethylsilyl)amido]zincate anion displays characteristic ¹³C{¹H) and ²⁹Si{¹H] chemical shifts of 7 and ?8 ppm, respectively; the nature of the solvent, the cation and the complexating ligands don't influence the IR nor NMR data of the zincate anion and thus verify that [Ca(DME)₃]²⁺ and {Zn[N(SiMe_{3 2}]₃}^? appear as solvent separated ions, which is also confirmed by their insolubility in hydrocarbons.     

Comparing Neutral (Monometallic) and Anionic (Bimetallic) Aluminum Complexes in Hydroboration Catalysis: Influences of Lithium Cooperation and Ligand Set

Bimetallic lithium aluminates and neutral aluminum counterparts are compared as catalysts in hydroboration reactions with aldehydes, ketones, imines and alkynes. Possessing Li–Al cooperativity, ate catalysts are found to be generally superior. Catalytic activity is also influenced by the ligand set, alkyl and/or amido. Devoid of an Al?H bond, iBu₂Al(TMP) operates as a masked hydride reducing benzophenone through a β‐Η transfer process. This catalyst library therefore provides an entry point into the future design of Al catalysts targeting substrate specific transformations.     

Micelle nano-reactors as mediators of water-insoluble ligand complexation with Cu(II) ions in aqueous medium

Complexation reactions between water-soluble and -insoluble reactants were shown to occur in aqueous media in the presence of normal or reverse surfactant micelles, in significantly higher yields at lower temperatures compared to those achieved in neat organic solvents. The highest yield enhancement in the complexation of novel water-insoluble bis(2-amino-1,3,4-thiadiazolyl)methane and 1,4-bis(2-amino-1,3,4-thiadiazolyl)benzene ligands with Cu(II) ions was achieved in the sodium bis(2-ethylhexyl)sulfosuccinate (AOT)-heptane-water reverse micellar system at the hydration ratio of 15. The results revealed that AOT normal micelles cause a change in the reaction mechanism together with the enhancement of the complex formation. The observed micellar effects were rationalized on basis of the properties of bulk solvents, surfactants and ligands, considering the solvation and hydration ratios of reverse micelles. The results have proved the dependence of complex yield on the amount and accordingly also on the properties of water in the micellar core, indicating that the yield can be maximized by the optimization of the hydration ratio.     

Enantioselective Zinc/BINOL‐Catalysed Alkynylation of Aldimines Generated in Situ from α‐Amido Sulfones

Chiral nonracemic N‐Cbz‐protected propargylic amines have been prepared by the addition of terminal alkynes to imines generated in situ from α‐amido sulfones in the presence of diethylzinc and BINOL‐type ligands as catalysts. The reactions give good yields and high enantioselectivities (ee values up to 95 %) for a good number of aromatic and heteroaromatic α‐amido sulfones and alkynes.     

Mechanistic elucidation of intramolecular aminoalkene hydroamination catalyzed by a tethered bis(ureate) complex: evidence for proton-assisted C-N bond formation at zirconium

A broad mechanistic investigation regarding hydroamination reactions catalyzed by a tethered bis(ureate) zirconium species, [ureate(2-)]Zr(NMe(2))(2)(HNMe(2)), is described. The cyclization of both primary and secondary aminoalkene substrates gives similar kinetic profiles, with zero-order dependence on substrate concentration up to ～60-75% conversion, followed by first-order dependence for the remainder of the reaction. The addition of 2-methylpiperidine changes the observed substrate dependence to first order throughout the reaction, but does not act as a competitive inhibitor. The reactions are first order in precatalyst up to loadings of ～0.15 M, indicating that a well-defined, mononuclear catalytic species is operative. Several model complexes have been structurally characterized, including dimeric imido and amido species, and evaluated for catalytic performance. These results indicate that imido species need not be invoked as catalytically relevant intermediates, and that the mono(amido) complex [ureate(2-)]Zr(NMe(2))(Cl)(HNMe(2)) is much less active than its bis(amido) counterpart. Structural evidence suggests that this is due to differences in coordination geometry between the mono- and bis(amido) complexes, and that an equatorial amido ligand is required for efficient catalytic turnover. On the basis of the determination of kinetic isotope effects and stoichiometric reactivity, the catalytic turnover-limiting step is proposed to be a concerted C-H, C-N bond-forming process with a highly ordered, unimolecular transition state (ΔS(?) = -21 ± 1 eu). In addition to this key bond-forming step, the catalytic cycle involves an on-cycle pre-equilibrium between six- and seven-coordinate intermediates, leading to the observed switch from zero- to first-order kinetics.     

Trans influence on the rate of reductive elimination. Reductive elimination of amines from isomeric arylpalladium amides with unsymmetrical coordination spheres

To determine the trans effect on the rates of reductive eliminations from arylpalladium(II) amido complexes, the reactions of arylpalladium amido complexes bearing symmetrical and unsymmetrical DPPF (DPPF = bis(diphenylphosphino)ferrocene) derivatives were studied. THF solutions of LPd(Ar)(NMeAr') (L = DPPF, DPPF-OMe, DPPF-CF3, DPPF-OMe,Ph, DPPF-Ph,CF3, and DPPF-OMe,CF3; Ar = C6H4-4-CF3; Ar' = C6H4-4-CH3, Ph, and C6H4-4-OMe) underwent C-N bond forming reductive elimination at -15 C to form the corresponding N-methyldiarylamine in high yield. Complexes ligated by symmetrical DPPF derivatives with electron-withdrawing substituents on the DPPF aryl groups underwent reductive elimination faster than complexes ligated by symmetrical DPPF derivatives with electron-donating substituents on the ligand aryl groups. Studies of arylpalladium amido complexes containing unsymmetrical DPPF ligands revealed several trends. First, the complex with the weaker donor trans to nitrogen and the stronger donor trans to the palladium-bound aryl group underwent reductive elimination faster than the regioisomeric complex with the stronger donor trans to nitrogen and the weaker donor trans to the palladium-bound aryl group. Second, the effect of varying the substituents on the phosphorus donor trans to the nitrogen was larger than the effect of varying the substituents on the phosphorus donor trans to the palladium-bound aryl group. Third, the difference in rate between the isomeric arylpalladium amido complexes was similar in magnitude to the differences in rates resulting from conventional variation of substituents on the symmetric phosphine ligands. This result suggests that the geometry of the complex is equal in importance to the donating ability of the dative ligands. The ratio of the differences in rates of reaction of the isomeric complexes was similar to the relative populations of the two geometric isomers. This result and consideration of transition state geometries suggest that the reaction rates are controlled more by substituent effects on ground state stability than on transition state energies. In addition, variation of the aryl group at the amido nitrogen showed systematically that complexes with more electron-donating groups at nitrogen undergo faster reductive elimination than those with less electron-donating groups at nitrogen.     

The Dehydrogenation of Alcohols through a Concerted Bimetallic Mechanism Involving an Amido-Bridged Diiridium Complex

From amido to imido: A dinuclear amido-bridged iridium complex promotes the dehydrogenation of alcohols, affording unusual mixed amido/imido Ir(4) and bis(imido) Ir(3) clusters. Theoretical calculations suggest that bridging μ-NH(2) linkages are crucial to achieve the formation of hydrido amine diiridium species, as a result of a concerted net hydrogen transfer through a proposed eight-membered dimetallacycle.     

Synthesis of Carbene-Metal-Amido (CMA) Complexes and Their Use as Precatalysts for the Activator-Free,Gold-Catalyzed Addition of Carboxylic Acids to Alkynes

A straightforward synthetic protocol leading to carbene–metal–amido (CMA) complexes (metal=Au, Cu) using a mild base and an environmentally desirable solvent (EtOH) has been explored, with a focus on complexes bearing backbone-substituted N-heterocyclic carbene (NHC) ligands, including BIAN-NHCs (BIAN=bis(imino)acenaphthene). The novel CMAs were structurally characterized, and gold-based CMAs bearing diverse NHCs were screened as simple, Brønsted-basic precatalysts. The readily accessible complexes display high catalytic activity in the intermolecular and intramolecular hydrocarboxylation of internal alkynes and alkynoic acids respectively, while the screening reveals the ancillary ligand effect of NHCs in these catalytic systems.     

The role of nickelole intermediates in the oligomerization of alkynes

Bis(triphenylphosphine)nickel(II) chloride reacts with E,E,-1,4-dilithio-1,2,3,4-tetraphenylbutadiene to yield a solution of a 2,3,4,5-tetraphenylnickelole complex. This compound reacts promptly with CO to yield tetracyclone, with dimethyl acetylenedicarboxylate to form dimethyl tetraphenylphthalate and catalytically with diphenylacetylene to form hexaphenylbenzene. A similar treatment of (1,2-bis(diphenylphosphino)ethane)nickel(II) chloride with the lithium reagent led to the isolation of (1,2-bis(diphenylphosphino)ethane)bis(2,3,4,5-tetraphenylnickelole), which likewise reacts with dimethyl acetylenedicarboxylate to yield dimethyl tetraphenylphthalate. These results support the interpretation that nickeloles are reactive intermediates in the cyclotrimerization of alkynes by nickel(0) catalysts.     

Synthesis of bis(indolyl)alkanes by a site-selective gold-catalyzed addition of indoles to butynol derivatives

A new site-selective hydroarylation reaction of alkynes catalyzed by gold complexes and directed by an internal hydroxyl group has been developed. Thus, the treatment of 3-butyn-1-ol derivatives with indoles and a catalytic amount of an in situ formed cationic gold complex leads to the formation of bis(indolyl)alkane derivatives. Particularly interesting is the reaction with terminal alkynes as the double addition of the indol occurs at the terminal carbon of the triple bond. The reaction conditions are very mild and the final bis(indolyl)alkanes are obtained in high yields.     

Novel pyridine‐bis(ferrocene‐isoxazole) ligand: synthesis and application to palladium‐catalyzed Sonogashira cross‐coupling reactions under copper‐ and phosphine‐free conditions

We present here the first synthesis and application to Sonogashira reaction of pyridine‐bis(ferrocene‐isoxazole) Pd(II) complex 5 , prepared from 2,6‐bis‐(5‐ferrocenylisoxazole‐3‐yl)pyridine. Under copper‐ and phosphine‐free conditions, the stable complex 5 efficiently catalyzed the cross‐coupling of aryl halides with terminal alkynes in DMF–H₂O with TBAB as an additive, hexahydropyridine as base and affording internal arylated alkynes in moderate to excellent yields. Copyright © 2008 John Wiley & Sons, Ltd.     

Highly beta-(E)-selective hydrosilylation of terminal and internal alkynes catalyzed by a (IPr)Pt(diene) complex

The regioselective hydrosilylation of terminal and internal alkynes catalyzed by the novel (IPr)Pt(AE) ( 7) (IPr = bis(2,6-diisopropylphenyl)imidazo-2-ylidene, AE = allyl ether) complex is presented. The (IPr)Pt(AE) catalyst displays enhanced activity and regioselectivity for the hydrosilylation of terminal and internal alkynes with low catalyst loading (0.1 to 0.05 mol %) when compared to the parent (IPr)Pt(DVDS) complex ( 6) (DVDS = divinyltetramethyldisiloxane). The reaction leads to exquisite regioselectivity in favor of the cis-addition product on the less hindered terminus of terminal and internal alkynes. The solvent effects were examined for the difficult hydrosilylation of benzylpropargyl ether. In light of the observed product distribution and kinetic data, a mechanistic scheme is proposed involving two competing catalytic cycles. One cycle leads to high regioselectivities while the other, having lost the stereodirecting IPr carbene ligand, displays low regiocontrol and activities. The importance of this secondary catalytic cycle is either caused by the strong coordinating ability of the alkyne or by the low reactivity of the silane or both.     

AuCl(3)-catalyzed benzannulation: synthesis of naphthyl ketone derivatives from o-alkynylbenzaldehydes with alkynes

The reaction of o-alkynylbenzaldehydes 1 and alkynes 2 in the presence of a catalytic amount of AuCl3 in (CH2Cl)2 at 80 degrees C gave naphthyl ketone products in high yields. The AuCl3-catalyzed formal [4 + 2] benzannulation proceeds most probably through the coordination of the triple bond of 1 to AuCl3, the formation of benzo[c]pyrylium auric ate complex via the nucleophilic addition of the carbonyl oxygen atom, the Diels-Alder addition of alkynes 2 to the auric ate complex, and subsequent bond rearrangement. Similarly, the AuCl3-catalyzed reactions of o-alkynylacetophenone and o-alkynylbenzophenone with phenylacetylene afforded the corresponding naphthyl ketone products in good yields.