Experimental and theoretical evidence suggests carbamate intermediates play a key role in CO2 sequestration catalysed by sterically hindered amines

The chemisorption of CO₂ by aqueous-hindered amines has been investigated experimentally and theoretically. Negative-ion ESI–MS analysis of solutions containing a sterically hindered amine and a source of ¹³CO₂ reveals peaks corresponding to [M–H + 45]^?. These ions readily lose 45 Da when subjected to collisional activation, and together with other key fragments confirms the generation of the ¹³C-labelled carbamate derivatives. The thermochemistry of the two key capture reactions: $$2.{\text{amine }} + {\text{ CO}}_{ 2} { \leftrightarrows }{\text{amine}} - {\text{CO}}_{ 2}^{ - } + {\text{ amine}} - {\text{H}}^{ + } {\kern 1pt} \quad 1:{\text{carbam}}$$ $${\text{amine }} + {\text{ CO}}_{ 2} + {\text{ H}}_{ 2} {\text{O}}{ \leftrightarrows }{\text{HCO}}_{ 3}^{ - } + {\text{ amine}} - {\text{H}}^{ + } \quad 2:{\text{ bicarb}}$$ at 298 K was modelled using composite chemistry methods, CCSD(T), DFT, and SM8 free energies of solvation. The aqueous reaction free energies (ΔG ₂₉₈) for reaction 1 are predicted to be more negative than ΔG ₂₉₈ for reaction 2 when amine = ammonia, 2-aminoethanol (MEA), 2-amino-2-methyl-1-propanol (AMP), 2-amino-2-hydroxymethyl-propane-1,3-diol (tris), and 2-piperidinemethanol (2-PM). For AMP, tris, and 2-PM, activation free energies ΔG ₂₉₈ ^? for reaction 1 (SM8 + CCSD(T)/6-311 ++G(d,p)//M08-HX/MG3S: 38–67 kJ mol^?1) are smaller than the corresponding values for 2 (109–113 kJ mol^?1). For 2-PM, the computed carbamate ΔG ₂₉₈ ^? (38 kJ mol^?1) is comparable to the MEA value (45 kJ mol^?1), whereas the primary amines with tertiary alpha carbons have slightly larger values (60–70 kJ mol^?1). The organic amine values are much lower than the value for ammonia (93 kJ mol^?1). The results indicate CO₂ chemisorption proceeds via a carbamate intermediate for all aqueous primary and secondary amines. Hindered carbamates are susceptible to further chemical transformations following their formation.     

Crystal structure and standard molar enthalpy of formation of ethylenediamine dilauroleate (C12H24O2)2C2N2H8(s)

The crystal structure of ethylenediamine dilauroleate was determined by X-ray crystallography. A thermochemical cycle was designed in accordance with Hess law. The enthalpy change of the synthesis reaction of ethylenediamine dilauroleate was determined to be $ \Updelta_{{\text{r}}} H_{{\text{m}}}^{\Uptheta } $ Δ r H m Θ  = ?(49.07 ± 0.11) kJ mol^?1 by an isoperibol solution–reaction calorimeter. The standard molar enthalpy of formation of the title compound was calculated to be $ \Updelta_{\text{f}} H_{\text{m}}^{\Uptheta } $ Δ f H m Θ  = ?(38.78 ± 0.43) kJ mol^?1 by the designed thermochemical cycle, the enthalpies of dissolution and other auxiliary thermodynamic quantities.     

Synthesis of lanthanide(III) complexes appended with a diphenylphosphinamide and their interaction with human serum albumin

Two DOTA-based proligands bearing a pendant diphenylphosphinamide 4a and 4b were synthesised. Their Eu(III) complexes exhibit sensitised emission when excited at 270 nm via the diphenylphosphinamide chromophore. Hydration states of q = 1.5 were determined from excited state lifetime measurements (Eu.4a $ k_{{{\text{H}}_{ 2} {\text{O}}}} = 2. 1 4 \,{\text{ms}}^{ - 1} ,\;k_{{{\text{D}}_{ 2} {\text{O}}}} = 0. 6 4 \,{\text{ms}}^{ - 1} $ ; Eu.4b $ k_{{{\text{H}}_{ 2} {\text{O}}}} = 2. 6 7\, {\text{ms}}^{ - 1} ,\;k_{{{\text{D}}_{ 2} {\text{O}}}} = 1. 1 8 \,{\text{ms}}^{ - 1} $ ). In the presence of human serum albumin (HSA) (0.1 mM Eu.4a/b, 0.67 mM HSA, pH 7.4) q = 0.4 for Eu.4a ( $ k_{{{\text{H}}_{ 2} {\text{O}}}} = 1. 3 4\, {\text{ms}}^{ - 1} ,\;k_{{{\text{D}}_{ 2} {\text{O}}}} = 0. 7 5\, {\text{ms}}^{ - 1} $ ) and q = 0.6 for Eu.4b ( $ k_{{{\text{H}}_{ 2} {\text{O}}}} = 1. 8 3\, {\text{ms}}^{ - 1} ,\;k_{{{\text{D}}_{ 2} {\text{O}}}} = 1.0 5 \,{\text{ms}}^{ - 1} $ ). Relaxivites (pH 7.4, 298 K, 20 MHz) of the Gd(III) complexes in the absence and presence of HSA (0.1 mM Gd.4a/b, 0.67 mM HSA) were: Gd.4a (r ₁ = 7.6 mM^?1s^?1 and r ₁ = 11.7 mM^?1s^?1) and Gd.4b. (r ₁ = 7.3 mM^?1s^?1 and r ₁ = 16.0 mM^?1s^?1). These relatively modest increases in r ₁ are consistent with the change in inner-sphere hydration on binding to HSA shown by luminescence measurements on Eu.4a/b. Binding constants for HSA determined by the quenching of luminescence (Eu) and enhancement of relaxivity (Gd) were Eu.4a (27,000 M^?1 ± 12%), Eu.4b (32,000 M^?1 ± 14%), Gd.4a (21,000 M^?1 ± 15%) and Gd.4b (26,000 M^?1 ± 15%).     

Experimental and DFT study on complexation of Eu3+ with a macrocyclic lactam receptor

From extraction experiments and $ \gamma $ -activity measurements, the extraction constant corresponding to the equilibrium $ {\text{Eu}}^{ 3+ } \left( {\text{aq}} \right) + 3 {\text{A}}^{ - } \left( {\text{aq}} \right) + {\mathbf{1}}\left( {\text{nb}} \right) \Leftrightarrow {\mathbf{1}} \cdot {\text{Eu}}^{ 3+ } \left( {\text{nb}} \right) + 3 {\text{A}}^{ - } \left( {\text{nb}} \right) $ taking place in the two-phase water–nitrobenzene system ( $ {\text{A}}^{ - } = \text {CF}_{3} \text{SO}_{3}^{ - } $ ; 1 = macrocyclic lactam receptor—see Scheme 1; aq = aqueous phase, nb = nitrobenzene phase) was evaluated as $ { \log } K_{{{\text{ex}} }} ({\mathbf{1}} \cdot {\text{Eu}}^{ 3+ } ,{\text{ 3A}}^{ - } )\; = \; - 4. 9 \pm 0. 1 $ . Further, the stability constant of the 1·Eu³⁺ cationic complex in nitrobenzene saturated with water was calculated for a temperature of 25 °C: $ { \log } \beta_{{{\text{nb}} }} ({\mathbf{1}} \cdot {\text{Eu}}^{ 3+ } ) \; = \; 8. 2 \pm 0. 1 $ . Finally, using DFT calculations, the most probable structure of the cationic complex species 1·Eu³⁺ was derived. In the resulting 1·Eu³⁺ complex, the “central” cation Eu³⁺ is bound by five bond interactions to two ethereal oxygen atoms and two carbonyl oxygens, as well as to one carbon atom of the corresponding benzene ring of the parent macrocyclic lactam receptor 1 via cation-π interaction.

The standard molar enthalpy of formation of Ce2(MoO4)3(s) and Sm2(MoO4)3(s) using solution calorimetry

The enthalpies of formations of Ce₂(MoO₄)₃(s) and Sm₂(MoO₄)₃(s) have been measured at 298.15 K using semi adiabatic solution calorimetry. The precipitation reaction between RE(NO₃)₃·6H₂O(s) (R= Ce, Sm) and ammonical solution of Na₂MoO₄(s) was studied. From the enthalpy of precipitation and other required auxiliary data, $ \Updelta_{\text{f}} H_{\text{m}}^{ \circ } \left( { 2 9 8. 1 5 {\text{ K}}} \right) $ Δ f H m ° ( 2 9 8.1 5 K ) of Ce₂(MoO₄)₃(s) and Sm₂(MoO₄)₃(s) have been calculated for the first time as ?4388.7 ± 3.6 and ?4363.4 ± 4.1 kJ mol^?1, respectively. The enthalpy of hydration of anhydrous Ce(NO₃)₃(s) to Ce(NO₃)₃·6H₂O(s) has been calculated. $ \Updelta_{\text{f}} H_{\text{m}}^{ \circ } \left( {{\text{MoO4}}^{ 2- } ,\,{\text{aq}},\, 2 9 8. 1 5 \,{\text{K}}} \right) $ Δ f H m ° ( MoO4 2 ? , aq , 2 9 8.1 5 K ) has also been measured and calculated as ?995.1 kJ mol^?1 from required literature data.     

Thermodynamic characterization of chromium tellurate

The standard Gibbs energy of formation of chromium tellurate, Cr₂TeO₆ was determined from the vapour pressure measurement of TeO₂(g) over the phase mixture Cr₂TeO₆(s) + Cr₂O₃(s) in the temperature range 1,183–1,293 K. A thermogravimetry (TG)-based transpiration technique was used for the vapour pressure measurement. This technique was validated by measuring the vapour pressure of CdCl₂(g) over CdCl₂(s). The temperature dependence of the vapour pressure of CdCl₂(g) could be represented as logp (Pa) (±0.02) = 12.06 ? 8616.3/T (K) (734 ? 823 K). A ‘third-law’ analysis of the vapour pressure data yielded a mean value of 185.1 ± 0.4 kJ mol^?1 for the enthalpy of sublimation of CdCl₂(s). The temperature dependence of vapour pressure of TeO₂(g) generated by the incongruent vapourisation reaction, $ {\text{Cr}}_{ 2} {\text{TeO}}_{ 6} (\rm s) \to {\text{Cr}}_{ 2} {\text{O}}_{ 3} (\rm s) + {\text{TeO}}_{ 2} (\rm g) + 1/2\,{\text{O}}_{ 2} (\rm g) $ could be represented as logp (Pa) (±0.04) = 18.57 – 21,199/T (K) (1,183 – 1,293 K). The temperature dependence of the Gibbs energy of formation of Cr₂TeO₆ could be expressed as $ \{ \Updelta G_{\text{f}}^{ \circ } ({\text{Cr}}_{ 2} {\text{TeO}}_{ 6} ,{\text{ s}}){\text{ (kJ}}\,{\text{mol}}^{ - 1} )\pm 4. 0 {\text{\} = }} - 1 6 2 5. 6 { \,+\, 0} . 5 3 3 6\,T({\text{K}}) \, (1{,}183 - 1{,}293\,{\text{K}}). $ A drop calorimeter was used for measuring the enthalpy increments of Cr₂TeO₆ in the temperature range 373–973 K. Thermodynamic functions viz., heat capacity, entropy and Gibbs energy functions of Cr₂TeO₆ were derived from the experimentally measured enthalpy increment values. $ \Updelta H_{{{\text{f}},298\,{\text{K}}}}^{ \circ } ({\text{Cr}}_{ 2} {\text{TeO}}_{ 6} ) $ was found to be ?1636.9 ± 0.8 kJ mol^?1.     

Exploring antibiotic resistance based on enzyme hydrolysis by microcalorimetry

In an effort to understand the reactions of antibiotics hydrolysis with metallo-β-lactamases (MβLs), the thermokinetic parameters of cefazolin hydrolysis with B1 subclass MβL CcrA from Bacteroides fragilis were determined by microcalorimetric method. The values of activation free energy $ \Updelta G_{ \ne }^{\theta } $ are 88.032 ± 0.038, 89.075 ± 0.025, 90.095 ± 0.034, and 91.261 ± 0.044 kJ mol^?1 at 293.15, 298.15, 303.15, and 308.15 K, respectively, the activation enthalpy $ \Updelta H_{ \ne }^{\theta } $ is 25.278 ± 0.005 kJ mol^?1, the activation entropy $ \Updelta S_{ \ne }^{\theta } $ is ?213.99 ± 0.14 J mol^?1 K^?1, the apparent activation energy E is 27.776 kJ mol^?1, and the reaction order is 1.4. The results indicated that the cefazolin hydrolysis with CcrA is an exothermic and spontaneous reaction. An association between the thermokinetic and kinetic parameters was revealed, which is that the catalytic constant K _cat increase with increase in $ \Updelta H_{ \ne }^{\theta } $ .     

The influence of methyl groups on the torsion angle and on the energetics of 1-phenylpyrrole derivatives: a thermodynamic and computational study

Calorimetric and effusion techniques, complemented by computational calculations were combined to determine the standard (p ^o = 0.1 MPa) molar enthalpies of formation, in the gaseous phase, $\Updelta_{\text{f}} H_{\text{m}}^{\text{o}} \left( {\text{g}} \right)$ , at T = 298.15 K, of 1-(3,5-dichlorophenyl)-2,5-dimethylpyrrole and 2,5-dimethyl-1-phenyl-3-pyrrolecarboxaldehyde, as (107.2 ± 2.7) and (25.9 ± 3.2) kJ mol^?1, respectively. These values were derived from the respective standard molar enthalpies of formation, in the crystalline phase, ${{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} \left( {\text{cr}} \right)$ , at T = 298.15 K, obtained from combustion calorimetry measurements, and from the standard molar enthalpies of sublimation, at T = 298.15 K, determined by the Knudsen effusion mass-loss method. The gas-phase enthalpies of formation of both experimentally studied compounds were also estimated by G3(MP2)//B3LYP computations, using a set of working reactions; the results obtained are in good agreement with the experimental data. With this computational approach, the enthalpies of formation of 1-(3,5-dichlorophenyl)pyrrole, 1-(3,5-dichlorophenyl)-2-methylpyrrole, 1-phenyl-3-pyrrolecarboxaldehyde and 2-methyl-1-phenyl-3-pyrrolecarboxaldehyde were also estimated and a value for their ${{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} \left( {\text{g}} \right)$ has been defined. Moreover, the molecular structures of the six molecules were established, their geometrical parameters were determined and the influence of methyl groups in the pyrrole ring (2 and 5 positions) on the phenyl/pyrrole torsion angle was analyzed. All the results were also interpreted in terms of enthalpic increments.     

Solvent extraction of europium trifluoromethanesulfonate into nitrobenzene by using three electroneutral receptors

From extraction experiments and $ \gamma $ -activity measurements, the extraction constants corresponding to the general equilibrium Eu³⁺(aq) + 3 A^?(aq) + L(nb) $ \Leftrightarrow $ EuL³⁺(nb) + 3A^?(nb) taking place in the two-phase water–nitrobenzene system ( $ {\text{A}}^{ - } = {\text{CF}}_{ 3} {\text{SO}}_{3}^{ - } $ ; L = electroneutral receptors denoted by 1, 2, and 3 – see Scheme 1; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Further, the stability constants of the EuL³⁺ complexes in nitrobenzene saturated with water were calculated; they were found to increase in the series of 3 < 2 < 1.

Reactions of ligands from BT(B)P family with solvated electrons and benzophenone ketyl radicals in 1-octanol solutions. Pulse radiolysis study

Pulse radiolysis involving reactions of solvated electrons and benzophenone ketyl radicals in 1-octanol with selected compounds from bis-triazinyl pyridines and bis-triazinyl bipyridines, BT(B)P family, developed for extraction of trivalent actinides have been studied. The designated ligands were: 2,6-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-benzo-[1,2,4]triazin-3-yl)pyridine, 6,6′-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-benzo-[1,2,4-]triazin-3-yl)-[2,2′]bipyridine, 6,6′-bis(5,6-diethyl-[1,2,4]triazin-3-yl)-[2,2′]bipyridine and 6,6′-bis(5,6-dipentyl-[1,2,4]triazin-3-yl)-[2,2′]bipyridine. Reactions of the ligands with solvated electrons in 1-octanol are fast. The rate constants were determined as equal to: $ k_{{{\text{CyMe}}_{4} {\text{BTP}}}} . $  = (2.4 ± 0.2) × 10⁹ dm³ mol^?1 s^?1, $ k_{{{\text{CyMe}}_{ 4} {\text{BTBP}}}} $  = (1.7 ± 0.3) × 10⁹ dm³ mol^?1 s^?1, $ k_{{{\text{C}}_{ 2} {\text{BTBP}}}} $  = (1.3 ± 0.3) × 10⁹ dm³ mol^?1 s^?1 and $ k_{{{\text{C}}_{ 5} {\text{BTBP}}}} $  = (1.7 ± 0.3) × 10⁹ dm³ mol^?1 s^?1. Reactions of the ligands with benzophenone ketyl radicals are much slower and the measured rate constants were as follows: $ k_{{{\text{CyMe}}_{ 4} {\text{BTP}}}} $  = 6.7 × 10⁷ dm³ mol^?1 s^?1 and $ k_{{{\text{CyMe}}_{ 4} {\text{BTBP}}}} $  = 3.2 × 10⁷ dm³ mol^?1 s^?1.     

Electrochemistry of Interaction Between Flavin Mononucleotide (FMN) and PM-17 as Antitumoral ε-Keggin Core Compound, \left[ {{\text{H}}_{ 2} {\text{Mo}}_{ 1 2}^{\text{V}} {\text{O}}_{ 2 8} \left( {\text{OH}} \right)_{ 1 2} \left( {{\text{Mo}}^{\text{VI}} {\text{O}}_{ 3} } \right)_{ 4} } \right]^{ 6- } at pH 7.5

In order to obtain a clue to the antitumor mechanism of $\left[ {{\text{Me}}_{ 3} {\text{NH}}} \right]_{ 6} \left[ {{\text{H}}_{ 2} {\text{Mo}}_{ 1 2}^{\text{V}} {\text{O}}_{ 2 8} \left( {\text{OH}} \right)_{ 1 2} \left( {{\text{Mo}}^{\text{VI}} {\text{O}}_{ 3} } \right)_{ 4} } \right]$ ·2H₂O (PM-17), the interaction of PM-17 with flavin mononucleotide (FMN) as a prosthetic group of the flavoprotein has been investigated by both polarographic analysis and isothermal titration calorimetry (ITC) technique at the physiological solution pH (7.5). The half-wave potential (?0.50 V vs. Ag/AgCl) of the d.c. polarogram for the quasi-reversible one-electron reduction of FMN was shifted by PM-17 toward a more positive potential with a resultant deviation from one-electron reduction to formally more than one-electron reduction waves. The PM-17 effect on the d.c. polarogram could be explained by a variety of FMN···(PM-17)_n (n > 0) aggregates with multiple conformations which was supported by the thermodynamic parameters (ΔH = ?29.7 kJ mol^?1, ΔS = ?28.2 J mol^?1 K^?1, ΔG = ?21.5 kJ mol^?1, and number of FMN in the binding with PM-17 (N) = 0.053 at 20 °C) estimated by the ITC technique. A large conformational change of the FMN domain by the FMN···(PM-17)_n aggregates is suggested to prevent the movement of the FMN centers into close proximity with nicotinamide adenine dinucleotide (NADH) with a resultant depression of the electron transport in NADH dehydrogenase.     

Synthesis and structural characterization of three dinuclear Copper(II) complexes incorporating pyrazolyl-derived ligands

Three new binuclear copper complexes of formulae $ \left[ {{\text{Cu}}_{2}^{\text{II}} {\text{Pz}}_{2}^{\text{Me3}} {\text{Br}}_{ 2} \left( {{\text{PPh}}_{ 3} } \right)_{ 2} } \right] $ (1), $ \left[ {{\text{Cu}}_{ 2}^{\text{II}} {\text{Pz}}_{2}^{\text{Ph2Me}} {\text{Cl}}_{ 2} \left( {{\text{PPh}}_{ 3} } \right)_{ 2} } \right] $ (2) and $ \left[ {{\text{Cu}}_{2}^{\text{II}} \left( {{\text{Pz}}^{\text{PhMe}} } \right)_{ 4} {\text{Cl}}_{ 4} } \right] $ (3) (Pz^Me3?=?3,4,5-trimethylpyrazole, Pz^Ph2Me?=?4-methyl-3,5-diphenylpyrazole and Pz^PhMe?=?3-methyl-5-phenylpyrazole) have been synthesized and characterized by chemical analysis, FTIR and ³¹P NMR spectroscopy and single-crystal X-ray diffraction. Complex 1 is a doubly bromo-bridged dimer, while complexes 2 and 3 are chloro-bridged dimers. The Cu(II) centers are in a distorted tetrahedral geometry for 1 and 2 and a distorted square pyramidal N₂Cl₃ environment for 3.     

Adsorption and corrosion inhibitive properties of piperidine derivatives on mild steel in phosphoric acid medium

The present study describes the inhibition effect of 4-benzyl piperidine (P1), 1,6-bis(4-benzylpiperidine-1-carboxamide)hexane (P2) and bis(4-benzylpiperidine)thiuram disulfide (P3) towards the corrosion of mild steel in 5.5 M H₃PO₄ solution using weight loss measurements and polarization technique. The influence of inhibitor concentration and temperature on the inhibitory behavior of P2 and P3 was investigated. Meanwhile, the inhibition efficiency (IE) was found to depend on the molecule structure and the concentration of piperidine derivatives. The IE for 10^?3 M P2 and P2 in 5.5 M H₃PO₄ is around 90 %. Polarization studies clearly revealed that all the compounds used act as mixed-type inhibitors. Adsorption isotherms were fitted by the Langmuir isotherm. Adsorption energies ( $ \Updelta {\text{G}}^\circ_{\text{ads}} $ and $ \Updelta {\text{H}}^\circ_{\text{ads}} $ ) and kinetic parameters were evaluated. Significant correlations are obtained between inhibition efficiency with the calculated chemical indexes, indicating that the variation of inhibition with structure of the inhibitor may be explained in terms of electronic properties.     

The inclusion of diflunisal by γ-cyclodextrin and permethylatedβ-cyclodextrin. A UV-visible and19F nuclear magnetic resonance spectroscopic study

The complexation of the diflunisal anion (DF) by γ-cyclodextrin (γCD) and permethylatedβ-cyclodextrin (βPCD) in aqueous solution at pH 7.00 at 298.2 K, has been studied by UV-visible and¹⁹F NMR spectroscopy. The formation of 1∶1 and 1∶2 γCD inclusion complexes proceeds through the two equilibria: (K1) $${\text{DF + }}\gamma {\text{CD}} \rightleftharpoons {\text{DF}} \cdot \gamma {\text{CD}}$$ (K2) $${\text{DF}} \cdot \gamma {\text{CD + }}\gamma {\text{CD }} \rightleftharpoons {\text{ DF}} \cdot {\text{(}}\gamma {\text{CD)}}_{\text{2}} {\text{ }}$$ characterised byK ₁=(5.5±0.2)×10⁴ dm³ mol^?1 andK ₂=(2.3±0.2)×10⁴ dm³ mol^?1 derived from UV-visible spectrophotometric data. The analogous βPCD complexes are characterised byK ₁=(6.86±0.02)×10⁴ dm³ mol^?1 andK ₂=(8.75±2.7)×10¹ dm³ mol^?1. The variation of the¹⁹F chemical shift of DF on inclusion is consistent with the formation of 1∶1 and 1∶2 complexes also. Comparisons with related systems are made.     

To determine the half-life for gemcitabine hydrochloride using microcalorimetry

The enthalpies of dissolution of gemcitabine hydrochloride in 0.9 % normal saline (medical) and citric acid solution were measured using a microcalorimeter at 309.65 K under atmospheric pressure. The differential enthalpy $ \left( {\Updelta_{\text{dif}} H_{\text{m}}^{{{\theta}}} } \right) $ and molar enthalpy $ \left( {\Updelta_{\text{sol}} H_{\text{m}}^{{{\theta}}} } \right) $ of dissolution were determined, respectively. The corresponding kinetic equation described the dissolution were elucidated to be da/dt = 10^?3.84(1 ? a)^0.92 and da/dt = 10^?3.80(1 ? a)^1.21. Besides, the half-life, $ \Updelta_{\text{sol}} H_{\text{m}}^{{{\theta}}} ,\;\Updelta_{\text{sol}} G_{\text{m}}^{{{\theta}}} $ and $ \Updelta_{\text{sol}} S_{\text{m}}^{{{\theta}}} $ of the dissolution were also obtained. Obviously, it will provide a simple and reliable method for the clinical application of gemcitabine hydrochloride.     

Extraction of some univalent cations into phenyltrifluoromethyl sulfone by using sodium dicarbollylcobaltate in the presence of benzo-18-crown-6

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M⁺ (aq) + 1·Na⁺ (org) $ \Leftrightarrow $ 1·M⁺ (org) + Na⁺ (aq) taking place in the two-phase water–phenyltrifluoromethyl sulfone (abbrev. FS 13) system (M⁺ = Li⁺, H₃O⁺, NH₄ ⁺, Ag⁺, Tl⁺, K⁺, Rb⁺, Cs⁺; 1 = benzo-18-crown-6; aq = aqueous phase, org = FS 13 phase) were evaluated. Further, the stability constants of the 1·M⁺ complexes in FS 13 saturated with water were calculated; they were found to increase in the series of $ {\text{Cs}}^{ + } \, < \,{\text{Rb}}^{ + } \, < \,{\text{H}}_{ 3} {\text{O}}^{ + } \, < \,{\text{Ag}}^{ + } \, < \,{\text{Li}}^{ + } \, < \,{\text{NH}}_{4}^{ + } \, < \,{\text{K}}^{ + } \, < \,{\text{Tl}}^{ + } $ .     

Synthesis,structure, and magnetic properties of heterotrimetallic tetranuclear complexes

Two novel heterotrimetallic tetranuclear complexes [Cu(H₂L)(CH₃OH)]₂Gd(DMF)Fe(CN)₆·2H₂O·DMF (1) and [Cu(H₂L)(CH₃OH)]₂Tb(H₂O)_0.57(DMF)_0.43Fe(CN)₆·5.5H₂O (2) are reported (H₄L = N,N′-ethylenebis(3-hydroxysalicylidene)). The central Ln(III) ion is surrounded by two neutral [Cu(H₂L)(CH₃OH)] moieties, forming a Cu₂Ln trinuclear unit. The [Fe(CN)₆]^3? anion is weakly coordinated to one Cu(II) ion of [Cu(H₂L)(CH₃OH)] through a cyanide nitrogen atom with the N–Cu distance of ca. 3.2 Å. Magnetic susceptibility measurements indicate the presence of overall ferromagnetic interactions in complexes 1 and 2. The magnetic coupling constant in complex 1 is J _Cu1Gd1 = 4.54 cm^?1 and J _Cu2Gd1 = 7.97 cm^?1 based on \( \hat{H} = - 2J_{\text{Cu1Gd1}} \hat{S}_{\text{Cu1Gd1}} - 2J_{\text{Cu2Gd1}} \hat{S}_{\text{Cu2Gd1}} \) . Dynamic AC magnetic susceptibility studies reveal that complex 2 shows frequency-dependent out-of-phase signals, typical of single molecule magnet behavior. The energy barrier for complex 2 under a 2 kOe applied DC magnetic field is 13 K.     

Inclusion of rhodamine B byβ-cyclodextrin. An equilibrium and kinetic spectrophotometric study

A UV/visible spectrophotometric temperature-jump study of the inclusion of the rhodamine B zwitterion (RB) by β-cyclodextrin (βCD) to form a 1:1 complex (RB·βCD) in aqueous 1.00 mol dm^?3 NaCl at pH 6.40 and 298.2 K yields:k ₁=(1.3±0.2)×10⁸ dm³ mol^?1 s^?1,k _?1=(2.2±0.5)×10⁴ s^?1, andK ₁=(5.9±2.3)×10³ dm³ mol^?1 for the equilibrium: $${\text{RB + }}\beta {\text{CD}}{\text{RB}} \cdot \beta {\text{CD}} K_1 $$ Under the same conditions the dimerization of RB: $${\text{2}} {\text{RB}}({\text{RB}})_2 K_d $$ is characterized byK _d =(1.8±1.0)×10³ dm³ mol^?1. The interaction of RB with αCD and γCD is weaker than with βCD, and is discussed in terms of the relative sizes of RB and the cyclodextrin annulus. Comparisons are made with the inclusions of other dyes by cyclodextrins.     

Complexation of Nickel Ions by Boric Acid or (Poly)borates

An experiment based on electrochemical reactions and pH monitoring was performed in which nickel ions were gradually formed by oxidation of a nickel metal electrode in a solution of boric acid. Based on the experimental results and aqueous speciation modeling, the evolution of pH showed the existence of significant nickel–boron complexation. A triborate nickel complex was postulated at high boric acid concentrations when polyborates are present, and the equilibrium constants were determined at 25, 50 and 70 °C. The calculated enthalpy and entropy at 25 °C for the formation of the complex from boric acid and Ni²⁺ ions are respectively equal to (65.6 ± 3.1) kJ·mol^?1 and (0.5 ± 11.1) J·K^?1·mol^?1. The results of this study suggest that complexation of nickel ions by borates can significantly enhance the solubility of nickel metal and nickel oxide depending on the concentration of boric acid and pH. First principles calculations were investigated and tend to show that the complex is thermodynamically stable and the nickel cation in solution should interact more strongly with the \( {\text{B}}_{3} {\text{O}}_{3} \left( {\text{OH}} \right)_{4}^{ - } \) than with boric acid.