Synthesis,and Experimental and Theoretical Characterization of 3-（4-（Dimethylamino） benzylidene）-l,5-dioxaspiro [5.5] Undecane-2,4-dione

The title molecule, 3-（4-（dimethylamino）benzylidene）-l,5-dioxaspiro[5.5] unde- cane-2,4-dione （I）, was synthesized and characterized by elemental analysis, IR, UV-vis spectra and X-ray diffraction analysis. The compound belongs to the triclinic system, space group Pi with a = 6.3640（6）, b = 7.7404（8）, c = 16.2890（18） A, α = 86.860（2）, β = 85.837（2）, γ = 79.6720（10）°, V = 786.60（14） A3, D, = 1.331 g/cm3, and F（000） = 336. Geometrical structure of the title compound was optimized by density functional theory （DFT） using B3LYP method with 6-31G＊＊ as the basis set. The vibrational frequencies were calculated by the DFT method and the results are consistent with the observed frequencies. The electronic absorption spectra were studied with the time- dependent density functional theory （TD-DFT）, showing the calculation results in good agreement with the corresponding experimental data.     

Two New Low Dimensional Lead(Ⅱ) Diiodide Complexes by Introducing Carbonyls on 1,10-Phenanthroline: a Combined Experimental and Theoretical Study

Two new low dimensional lead(Ⅱ) diiodide complexes with 1,10-phenanthroline-5,6-dione(Phendione), PbI2(Phendione)2(1) and PbI2(Phendione)(DMSO)2(2), have been synthesized by solution processes and structurally determined by X-ray diffraction method. Both compounds are mononuclear with the lead centers being in highly distorted octahedral environments. Hydrogen bonds and π-π stacking interactions contribute to the structural extension and stabilization. Theoretical calculations based on the DFT/B3 LYP level indicate that the introduction of electronic donating groups on the phenanthroline ring can improve the electron density of nitrogen atoms, and they can replace part of the bridged iodine atoms to lower the structural dimensions. Experimental band gaps of about 2.07 and 1.97 eV indicate their semiconductor nature.     

Density Functional Theory Studies on the Adsorption of CO2 on Different CaO Surfaces

Carbon dioxide adsorbed on different kinds of CaO surfaces has been investigated with the help of the first principle density functional theory plane wave calculations. Various possible configurations have been considered and the calculated results showed that CO2 was strongly adsorbed by C atom bonded with the CaO （001） and （110） surfaces with adsorption energies of 1.38 and 3.22 eV, respectively. The adsorption of CO2 molecule on defect surfaces is complicated compared with that on the pristine surfaces. The adsorption energy of CO2 absorbed on the CaO（110） surface is larger than that of CaO（001） surface when the type of defect surface is the same.     

Solvent effects on the excited state properties of 2-aminopurine—a theoretical study by the ONIOM and Supramolecular method

In this paper, the micro-solvated effects on the lowest-energy vertical transition state and adiabatic excited states of 2-aminopurine (2Ap) were studied by Supramolecular method (B3LYP/6-31++G(d)) and ONIOM (B3LYP/6-31++G(d):PM3) method. The results are as follows: (1) In 2Ap molecule surrounded by six water molecules the pyramidalization of amino group in 2Ap almost disappears, and the hex-atomic ring is obviously buckled. The adiabatic lowest-energy valence excitation of gaseous 2Ap also causes the disappearance of amino pyramidalization. (2) The energy for lowest-energy singlet π→π^* vertical transition in water is predicted as 3.99 and 4.29 eV by Supramolecular and ONIOM method, respectively. Both values are in good agreement with the reported experimental result, 4.11 eV. The energy for the second lowest-energy n→π^* transition, 4.72 eV, by the Supramolecular method is obviously deviated from the reported experimental value 4.46 eV. The corresponding value given by the two-layer ONIOM method, 4.43 eV, is in good agreement with the experimental value. (3) The optimized energy of the fluorescent emission state (S₁ state) are 3.61 and 3.87 eV by Supramolecular and ONIOM methods, respectively. The calculated oscillator strengths, in both gas and water clusters, were compared with reported experimental and theoretical results. These results indicated that both Supramolecular and ONIOM methods, combined with TD DFT B3LYP/6311++G(d), can provide good results of calculating excited state and spectra properties of 2Ap in condensed phase. This fact encouraged us to extend our study to 2Ap-T base pair and its solvated model so as to obtain the spectra properties of 2Ap in real DNA environment.     

Construction of photoresponsive supramolecular micelles based on ethyl cellulose graft copolymer

In this work, a UV-Visible light controlled supramolecular system based on ethyl cellulose(EC) was constructed, combining the host-guest interaction of β-cyclodextrin(β-CD) group and trans-isomer of azobenzene(tAzo) group. To link β-CD to the hydrophobic section, renewable EC was used as macroinitiator to initiate the polymerization of ε-caprolactone(ε-CL) to form biocompatible and biodegradable comb copolymer EC-g-PCL, and β-CD was attached to the end of PCL side chain via click reaction. Meanwhile, hydrophilic PEG-tAzo was obtained by N,N'-dicyclohexylcarbodiimide(DCC) coupling. Then, the structures of the products were characterized by nuclear magnetic resonance(NMR) and gel permeation chromatography(GPC). Subsequently, with the formation of inclusion complexes by β-CD and tAzo groups, the obtained EC-g-PCL-β-CD/PEG-tAzo supramolecular system self-assembled in water with hydrophobic EC-g-PCL-β-CD as core and hydrophilic PEG-tAzo as shell. Furthermore, dynamic light scattering(DLS) and transmission electron microscopy(TEM) were utilized to investigate the particle size and size distribution, while NMR and UV-Vis spectra were applied to explore the UV-Visible light stimuli-responsiveness of the micelles.     

Formation and stability of molybdenum-tellurium oxides MoTeO5, Mo2TeO8, Mo3TeO11 and MoTe2O7 in the gas phase. Quantum chemical and mass spectrometry determination of standard enthalpy of formation

The formation of mixed molybdenum-tellurium oxides MoTeO5, Mo2TeO8, Mo3TeO11, MoTe2O7 in the gas phase has been studied by mass spectrometry (MS) experiments at temperatures of about 938 K and studied theoretically by quantum chemical (QC) methods. Structural and thermodynamic data for the molecules was calculated. The mixed oxides MoTeO5, Mo2TeO8, Mo3TeO11 and MoTe2O7 in the gas phase have been reported for the first time. Experimental thermodynamic data have been determined by means of MS and confirmed theoretically by DFT and ab initio (MP2) calculations. Adiabatic ionisation potentials (IPs) were obtained experimentally and compared with theoretical vertical ionisation potentials. The following values are given: Δ(f)H(298)(0) (MoTeO5) = ?730.2 kJ mol(?1) (MS), Δ(f)H(298)(0) (MoTeO5) = ?735.4 kJ mol(?1) (DFT), ?717.3 kJ mol(?1) (MP2), S(298)(0) (MoTeO5) = 389.5 J mol(?1) K(?1) (DFT), c(p)(0)(T)(MoTeO5) = 141.71 + 13.54 × 10(?3)T ? 2.53 × 10(6)T(?2) J mol(?1) K(?1) (298 < T < 940 K) (DFT), Δ(f)H(298)(0) (Mo2TeO8) = ?1436.3 kJ mol(?1) (MS), Δ(f)H(298)(0) (Mo2TeO8) = ?1436.1 kJ mol(?1) (DFT), ?1455.9 kJ mol(?1) (MP2), S(298)(0) (Mo2TeO8) = 517.1 J mol(?1) K(?1) (DFT), c(p)(0)(T)(Mo2TeO8) = 228.64 + 24.15 × 10(?3)T ? 4.09 × 10(6)T(?2) J mol(?1) K(?1) (298 < T < 940 K) (DFT), Δ(f)H(298)(0) (Mo3TeO11) = ?2132.7 kJ mol(?1) (MS), Δ(f)H(298)(0) (Mo3TeO11) = ?2110.7 kJ mol(?1) (DFT), ?2163.2 kJ mol(?1) (MP2), S(298)(0) (Mo3TeO11) = 629.3 J mol(?1) K(?1) (DFT), c(p)(0)(T)(Mo3TeO11) = 316.40 + 34.10 × 10(?3)T ? 5.74 × 10(6)T(?2) J mol(?1) K(?1) (298 < T < 940 K) (DFT), Δ(f)H(298)(0) (MoTe2O7) = ?999.7 kJ mol(?1) (MS), Δ(f)H(298)(0) (MoTe2O7) = ?1002.7 kJ mol(?1) (DFT), ?1000.9 kJ mol(?1) (MP2), S(298)(0) (MoTe2O7) = 504.8 J mol(?1) K(?1) (DFT), c(p)(0)(T)(MoTe2O7) = 211.19 + 18.02 × 10(?3)T ? 3.53 × 10(6)T(?2) J mol(?1) K(?1) (298 < T < 940 K) (DFT), IP(MoTeO5) = 10.68 eV (DFT), IP(Mo2TeO8) = 10.4 ± 0.5 eV (MS), IP(Mo2TeO8) = 10.41 eV (DFT), IP(Mo3TeO11) = 10.7 ± 0.5 eV (MS), IP(Mo3TeO11) = 10.18 eV (DFT), IP(MoTe2O7) = 9.91 eV (DFT).     

A New Inorganic-organic Hybrid Based on Biisoquinoline and Hexachloridostannate:Structure,Photoluminescence, Electrochemical Behavior and Theoretical Study

A new inorganic-organic hybrid constructed from biisoquinoline dication and tin halide, [(BIQBT)(Sn Cl6)]n(1, BIQBT = 1,4-bis(isoquinoline) butane), has been synthesized and structurally determined by X-ray diffraction method. 1 crystallizes in the monoclinic system, space group Cc with Mr = 644.82, a = 16.589(3), b = 18.388(4), c = 8.5532(17), β = 108.75(3)°, V = 2470.6(9) 3, Z = 4, Dc = 1.736 g/cm3, F(000) = 1281, μ(Mo Kα) = 1.697 mm–1, the final R = 0.0197 and w R = 0.0493 for 4614 observed reflections with I 2(I). 1 consists of BIQBT2+dications and mononuclear hexachloridostannate Sn Cl62- anion, and hydrogen bonds among them contribute to the formation of a 1-D chain. Strong fluorescence can be detected in 1, which was explained by theoretical calculation. Its electrochemical behavior was investigated, and the theoretical calculations reveal that the π···π stacking interaction is dominated for their structural stabilization.     

Redox responsive activity regulation in exceptionally stable supramolecular assembly and co-assembly of a protein

Supramolecular assembly of biomolecules/macromolecules stems from the desire to mimic complex biological structures and functions of living organisms. While DNA nanotechnology is already in an advanced stage, protein assembly is still in its infancy as it is a significantly difficult task due to their large molecular weight, conformational complexity and structural instability towards variation in temperature, pH or ionic strength. This article reports highly stable redox-responsive supramolecular assembly of a protein Bovine serum albumin (BSA) which is functionalized with a supramolecular structure directing unit (SSDU). The SSDU consists of a benzamide functionalized naphthalene-diimide (NDI) chromophore which is attached with the protein by a bio-reducible disulfide linker. The SSDU attached protein (NDI-BSA) exhibits spontaneous supramolecular assembly in water by off-set π-stacking among the NDI chromophores, leading to the formation of spherical nanoparticles (diameter: 150–200 nm). The same SSDU when connected with a small hydrophilic wedge (NDI-1) instead of the large globular protein, exhibits a different π-stacking mode with relatively less longitudinal displacement which results in a fibrillar network and hydrogelation. Supramolecular co-assembly of NDI-BSA and NDI-1 (3 : 7) produces similar π-stacking and an entangled 1D morphology. Both the spherical assembly of NDI-BSA or the fibrillar co-assembly of NDI-BSA + NDI-1 (3 : 7) provide sufficient thermal stability to the protein as its thermal denaturation could be completely surpassed while the secondary structure remained intact. However, the esterase like activity of the protein reduced significantly as a result of such supramolecular assembly indicating limited access by the substrate to the active site of the enzyme located in the confined environment. In the presence of glutathione (GSH), a biologically important tri-peptide, due to the cleavage of the disulfide bond, the protein became free and was released, resulting in fully regaining its enzymatic activity. Such supramolecular assembly provided excellent protection to the protein against enzymatic hydrolysis as the relative hydrolysis was estimated to be <30% for the co-assembled protein with respect to the free protein under identical conditions. Similar to bioactivity, the enzymatic hydrolysis also became prominent after GSH-treatment, confirming that the lack of hydrolysis in the supramolecularly assembled state is indeed related to the confinement of the protein in the nanostructure assembly.

Supramolecular structure directing unit regulated co-assembly of a protein produces a highly stable fibrillar nanostructure and glutathione responsive release of the protein in its active state.     

Kristallstruktur des „supramolekularen”︁ Komplexes [Cs2(18-Krone-6)][HgI4] mit ungewöhnlich koordinierten Cs-Ionen

Crystal Structure of the “Supramolecular” Complex [Cs₂(18-crown-6)][HgI₄] with Unusually Coordinated Cs Ions The reaction of 18-crown-6, 1,4,7,10,13,16-hexaoxacyclooctadecane, with HgI₂/CsI in methanol yields crystals of [Cs₂(C₁₂H₂₄O₆)][HgI₄]. The compound crystallizes monoclinically, space group P2₁/c, Z = 4, a = 1574.8(3), b = 1067.0(3), c = 1693.2(6) pm, and β = 98.29(3)º. The structure consists of a network made up of two different types of [Cs-(18-crown-6)-Cs]²⁺ cations, interconnected by [HgI₄]^2? anions. The cations form an “anti-sandwich” structure with relatively short Cs ? Cs distances of 382 pm in the first type of cations and a longer distance of 480 pm in the second type of cations.     

Synthesis, Crystal Structure and Conformational Analysis of(E)-5-Methoxy-2-((4-methoxyphenylimino)methyl)phenol

The title compound,(E)-5-methoxy-2-((4-methoxyphenylimino)methyl)phenol(C15H15NO3),crystallizes in monoclinic,space group P21/c with a=9.4361(6),b=10.6212(5),c=12.9338(9),β=93.064(5)o,V=1294.41(14)3,Z=4,Dc=1.320 g/cm3,F(000)=544,Rint=0.116,T=296 K,μ=0.09 mm-1,the final R=0.051 and wR=0.148 for 1836 observed reflections with I2σ(I).An extensive two-dimensional network of C-H…O hydrogen bonds and π-ring interactions are responsible for the crystal stabilization.Intermolecular hydrogen bonds and C-H…π interactions produce R22(14),R44(30) and R44(31) rings.In addition to the molecular geometry from X-ray experiment,the molecular geometry of the title compound in the ground state has been calculated using the semi-empirical(AM1 and PM3) and density functional theory method(DFT)(B3LYP) with 6-31G(d) basis set.To determine the conformational flexibility,molecular energy profile of the title compound was obtained by semi-empirical(PM3 and AM1) and DFT/B3LYP calculations with respect to the selected degree of torsional freedom,which varied from -180° to +180° in a step of 10°.     

Structural and Chemical Characteristics of Model Molecular Fragments of Petroleum Resins

Supramolecular, molecular and electronic structures of petroleum resins are studied. The experimental part includes isolation of resins by the eluent method and measuring electron and IR spectra. The structural parameters are calculated by molecular mechanics and DFT/B3LYP methods. The calculated data are in good agreement with the experiment. The nonplanar structure of petroleum resins is confirmed by the results of our structural study.     

Physiochemical properties of organic nonlinear optical crystal from combined experimental and theoretical studies

2-(4-fluorophenyl)-1-(4-methoxyphenyl)-4,5-dimethyl-1H-imidazole (fpmpdi) was synthesised and its structure was characterized by 1H, 13C, mass, elemental analysis and X-ray techniques. It belongs to monoclinic crystal system having the lattice dimensions of monoclinic with point group, P21/c; a=8.5132 (1) ?, b=9.5128 (2) ?, c=19.2610 (3) ?, β=96.798 (2). Since (fpmpdi) is highly sensitive to different external stimulations such as UV irradiation, heat, increasing pressure and changing the environmental pH causing color change and so they can be used as a "multi-way" optically switchable material. A prominent fluorescence enhancement was found in the presence of transition metal ions such as Hg2+, Pb2+ and Cu2+ and this was suggested to result from the suppression of radiationless transitions from the n-π* state in the chemosensors. The optimized geometrical parameters obtained by DFT calculation is in good agreement with single crystal XRD data. The Mulliken, NBO charge analysis and the HOMO-LUMO energies were also calculated. The molecular electrostatic potential surface (MEP) and first static hyperpolarisability have also been employed theoretically which reveal that the fpmpdi have non-linear optical (NLO) behavior with non-zero values. Ground and excited states DFT calculations were carried out in order to find out dipole moment and energy.     

方酸与2, 6-二苯并咪唑的超分子自组装及氢键实验与理论研究

在氘代的二甲基亚砜的溶剂中合成了方酸与2, 6-二苯并咪唑的超分子的化合物,并用X射线单晶衍射对其结构进行了表征。晶体结构分析表明:超分子是通过π-π堆积和分子之间氢键所形成的一维链状的聚合物。探讨了不同温度和不同浓度CCl₄溶剂对聚合物中氢键的影响。此外,用密度泛函理论和分子中原子理论对其进行了理论分析,计算结果表明分子间的键能分别是135.65和49.40 J·mol^-1。     

Proton Transfer Isomerization of Pyrazole in the Ground State： σ vs π Mechanism and Water Assisting Effect

The proton transfer isomerization of pyrazole and the water assisting effect by looping 1 to 4 water molecules on the singlet state potential energy surface have been investigated by using hybrid density functional theory method （B3PW91） with a 6-311＋＋G^＊＊ basis set. Two mechanisms were proposed to explain the mono- and multi-water assisting effects, respectively. The reactants and products of all groups have been characterized on their potential energy surfaces. For the isomerizafion of monomolecule pyrazole, the isomeriz＇ation energy barrier is 46.4 kcal·mol^-1. For the monohydration assisting mechanism, the reactant complex is connected to the product complex via two saddle points. The corresponding isomerization barriers are 46.7and 23.0 kcal·mol^-1, respectively. As to the multihydration assisting mechanism, the isomerization barriers are 12.0, 10.9 and 13.14 kcal·mol^-1 accordingly, when the number of water molecules is 2, 3 and 4, respectively. The multihydration assisting isomerization can occur in water-dominated environments, for example, in the organism, and thereby is crucial to energy transference. The deproton and dehydrogen energies of monomolecule pyrazole and various hydrated pyrazoles were calculated and then found much bigger than the isomerization barriers of their relative complexes, suggesting the impossibility of deprotonation or dehydrogenation. The isomerization of pyrazole is a proton-coupling-electron-migration process, but two different mechanisms are noticed, viz. σ- and π-type mechanisms. The π-bond of pyrazole participates in isomerization in the π-type mechanism, whereas only o-electron takes part in isomerization in the σ-type mechanism.     

Supramolecular Vesicles Based on Water‐Soluble 2,6‐Helic[6]arene: High Affinity Binding,Stimuli Responsiveness and Delivery of Doxorubicin to Cancer Cells

Water‐soluble 2,6‐helic[6]arene was used to construct supramolecular vesicles via host‐guest interaction. Water‐soluble 2,6‐helic[6]arene was discovered to be high affinity host for suitable biomarkers. Supramolecular vesicles were responsive to multiple stimuli types, including temperature, pH, Ca²⁺, CO₂ bubbling and biomarker displacement. Supramolecular vesicles were used to load and deliver anti‐ tumor drug doxorubicin to HeLa cells in vitro.     

Crystal structure and chemical bonding of the high-temperature phase of AgN3

The crystal structure of silver azide (AgN3) in its high-temperature (HT) modification was determined from X-ray powder diffraction data, recorded at T = 170 degrees C and was further refined by the Rietveld method. The structure is monoclinic (P21/c (No. 14), a = 6.0756(2) A, b = 6.1663(2) A, c = 6.5729(2) A, beta = 114.19(0) degrees, V = 224.62(14) A3, Z = 4) and consists of two-dimensional Ag and N containing layers in which the silver atoms are coordinated by four nitrogen atoms exhibiting a distorted square coordination environment. These sheets are linked together by weaker perpendicular Ag-N contacts, thus forming a 4 + 2 coordination geometry around the silver atoms. The phase transition has been characterized by DTA, DSC, and measurement of the density, as well as of the ionic conductivity. Both, the room-temperature and the HT phase are electrically insulating. This fact is getting support by DFT band structure calculations within the generalized gradient approximation, using the PBE functional. On the basis of the DFT band structure, the bonding characteristics of both phases are essentially the same. Finally, the implication of the existence of a low-symmetry HT-phase in a crystalline explosive concerning decomposition mechanisms is discussed.     

Hg2＋-Selective Fluorescent Chemosensor Based on Cation-π Interaction

Two sulphur-containing 4-aminonaphthalimide derivatives were investigated as Hg2＋ fluorescent chemosensors. In CH3CN, both sensors present a remarkable fluorescence enhancement to Cu2＋ and Fe3＋, but a selective fluorescence quenching to Hg2＋ among the other metal ions. A cation-π interaction between Hg〉 and the naphthalimide moiety was proposed and confirmed By the density tunetional theory（DFT）.     

Macrocyclic Cr3+, Mn2+ and Fe3+ complexes of a mimic SOD moiety: Design,structural aspects,DFT, XRD,optical properties and biological activity

A novel SOD-like macrocycle “H₂DPD” and its trivalent chromium, iron and divalent manganese complexes have been isolated and characterized using the conventional tools. The macrocycle was prepared by 2:2 condensation of P-phenylenediamine with 5,5-dimethyl1,3-cyclohexanedione. IR and electronic spectral data suggested that H₂DPD coordinates to the metal ion as N₄ tetradentate donor with two Cl⁻ occupying the remaining two sites of the distorted octahedron. XRD spectrum of Cr³⁺ complex indicated that the complex crystallizes in a face-centered monoclinic structure with lattice parameters: a = 10.9380 Å; b = 12.4870 Å; c = 12.4600 Å, α = γ = 90° and β = 111.430 with space group P 1 21/c 1 (14). The energy gap (E_HOMO-E_LUMO), molecular electrostatic potential map (EPM) of title compounds, bond length, bond angle, as well as global and local reactivity were estimated using DFT method. The E_g values obtained from electronic spectra of Cr³⁺, Mn²⁺ and Fe³⁺ complexes were found to be 1.284, 1.220 and 1.138 eV, respectively which are in accordance with those evaluated by DFT revealing semiconductor nature. Also, the thermal degradation of all title compounds was carried out and the kinetic parameters were evaluated using Coats-Redfern and Horowitz-Metzger equations. Moreover, the compounds have screened for antibacterial as well as superoxide mimic activities. Cr³⁺ complex exhibited the most significant potent activity against all bacterial strains. With respect to SOD-like activity, the macrocycle showed the most remarkable SOD-like activity comparable to the standard drug, ascorbic acid.