Controlled direct synthesis of C-mono- and C-disubstituted derivatives of [3,3'-Co(1,2-C2B9H11)2]- with organosilane groups: theoretical calculations compared with experimental results

Mono- and dilithium salts of [3,3'-Co(1,2-C(2)B(9)H(11))(2)](-), (1(-)), react with different chlorosilanes (Me(2)SiHCl, Me(2)SiCl(2), Me(3)SiCl and MeSiHCl(2)) with an accurate control of the temperature to give a set of novel C(c)-mono- (C(c) = C(cluster)) and C(c)-disubstituted cobaltabis(dicarbollide) derivatives with silyl functions: [1-SiMe(2)H-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))](-) (3(-)); [1,1'-mu-SiMe(2)-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (4(-)); [1,1'-mu-SiMeH-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (5(-)); [1-SiMe(3)-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))](-) (6(-)) and [1,1'-(SiMe(3))(2)-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (7(-)). In a similar way, the [8,8'-mu-(1',2'-C(6)H(4))-1,1'-mu-SiMe(2)-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (8(-)); [8,8'-mu-(1',2'-C(6)H(4))-1,1'-mu-SiMeH-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (9(-)) and [8,8'-mu-(1',2'-C(6)H(4))-1-SiMe(3)-3,3'-Co(1,2-C(2)B(9)H(9))(1',2'-C(2)B(9)H(10))](-) (10(-)) ions have been prepared from [8,8'-mu-(1',2'-C(6)H(4))-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (2(-)). Thus, depending on the chlorosilane, the temperature and the stoichiometry of nBuLi used, it has been possible to control the number of substituents on the C(c) atoms and the nature of the attached silyl function. All compounds were characterised by NMR and UV/Vis spectroscopy and MALDI-TOF mass spectrometry; [NMe(4)]-3, [NMe(4)]-4 and [NMe(4)]-7 were successfully isolated in crystalline forms suitable for X-ray diffraction analyses. The 4(-) and 8(-) ions, which contain one bridging -mu-SiMe(2) group between each of the dicarbollide clusters, were unexpectedly obtained from the reaction of the monolithium salts of 1(-) and 2(-), respectively, with Me(2)SiHCl at -78 degrees C in 1,2-dimethoxyethane. This suggests that an intramolecular reaction has taken place, in which the acidic C(c)-H proton reacts with the hydridic Si-H, with subsequent loss of H(2). Some aspects of this reaction have been studied by using DFT calculations and have been compared with experimental results. In addition, DFT theoretical studies at the B3 LYP/6-311G(d,p) level of theory were applied to optimise the geometries of ions 1(-)-10(-) and calculate their relative energies. Results indicate that the racemic mixtures, rac form, are more stable than the meso isomers. A good concordance between theoretical studies and experimental results has been achieved.     

Metallacarboranes as building blocks for polyanionic polyarmed aryl-ether materials

Polyanionic species have been obtained in high yield by a new route in the ring-opening reaction of cyclic oxonium [3,3'-Co(8-C4H8O2-1,2-C2B9H10)(1',2'-C2B9H11)] (2) by using carboxylic acids, Grignard reagents, and thiocarboranes as nucleophiles. The crystal structures of Na3(H2O)(C2H5OH)[1',3',5'-{3,3'-Co(8-O(CH2CH2O)2-1,2-C2B9H10)(1',2'-C2B9H11)}3-C6H3] and Na(H2O)[3,3'-Co(8-O(CH2CH2O)2C(O)CH3-1,2-C2B9H10)(1',2'-C2B9H11)] show that the chain contributes three or two oxygen atoms for coordination to Na(+), and interestingly, the [3,3'-Co(1,2-C2B9H11)2](-) moiety provides extra B-H coordination sites. These B-H...Na interactions in the solid state have also been confirmed by dynamic NMR studies in solution. These new polyanionic compounds that contain multiple carborane or metallacarborane clusters at their periphery may prove useful as new classes of boron neutron capture therapy compounds with enhanced water solubility and as a core to make a new class of dendrimers.     

Stepwise sequential redox potential modulation possible on a single platform

Step by step: The cluster [3,3'-Co(1,2-C(2)B(9)H(11))(2)](-) is an excellent platform for making a stepwise tunable redox potential system by dehydroiodination. With the addition of up to eight iodine substituents (purple; see picture), there is a fall in the E(1/2)(Co(III)/Co(II)) value from -1.80?V to -0.68?V (vs. Fc(+)/Fc; Fc = ferrocene). A practical application of this tunability has been observed in the growth of polypyrrole.     

Arene-ruthenium complexes of an acyclic thiolate-thioether and tridentate thioether derivatives resulting from ring-closure reactions

The reaction of [(eta(6)-arene)RuCl(2)](2) (arene = C(6)Me(6), 1,4-MeC(6)H(4)CHMe(2)) with a large excess of the dianion of bis(2-mercaptoethyl) sulfide, (HSCH(2)CH(2))(2)S, obtained from deprotonation of the dithiol with freshly prepared NaOMe, gives the deep red, monomeric complexes [(eta(6)-arene)Ru(eta(3)-C(4)H(8)S(3))] (arene = C(6)Me(6) (5), 1,4-MeC(6)H(4)CHMe(2) (6)) in which the dianion is bound to the metal atom through one thioether and two thiolate sulfur atoms. Complex 5 reacts with [(eta(6)-C(6)Me(6))RuCl(2)](2) (4) in a 2:1 mole ratio to give a quantitative yield of the chloride salt of a binuclear cation [((eta(6)-C(6)Me(6))Ru)(2)Cl(mu(2)-eta(2):eta(3)-C(4)H(8)S(3))](+) (7) in which the thiolate sulfur atoms of the [(eta(6)-C(6)Me(6))Ru(eta(3)-C(4)H(8)S(3))] group bridge to a (eta(6)-C(6)Me(6))RuCl unit. This compound is also obtained directly from the reaction of 4 with the dithiolate, if the Ru dimer is used in large excess. The binuclear complex [((eta(6)-C(6)Me(6))Ru)(2)(MeCN)(mu(2)-eta(2):eta(3)-C(4)H(8)S(3))](PF(6))(2).MeCN, (9)(PF(6))(2).MeCN, is obtained by treatment of (7)Cl with NH(4)PF(6) in acetonitrile. Protonation of 5 with HCl gave the mono- and diprotonated derivatives viz. [(eta(6)-C(6)Me(6))Ru(eta(3)-C(4)H(9)S(3))]Cl, (8)Cl, and [(eta(6)-C(6)Me(6))Ru(eta(3)-C(4)H(10)S(3))]Cl(2), (10)Cl(2), respectively. The reaction of 5 with methyl iodide gives both the mono- and di-S-methylated derivatives. Treatment of 5 with dibromoalkanes, Br(CH(2))(n)Br (n = 1-5), effects ring closure to give the (eta(6)-C(6)Me(6))Ru dications containing the trithia mesocyclic zS3 (z = 8-12) ligands, isolated as their PF(6) salts. The X-ray crystal structures of 5, 6, the solvates of (7)Cl and (9)(PF(6))(2), and the trithia mesocyclic Ru complexes (eta(6)-C(6)Me(6))Ru(zS3)(PF(6))(2) (z = 8-11) are reported.     

Reactivity of the bis(pentafluorophenyl)boranes ClB(C6F5)2 and [HB(C6F5)2]n towards late transition metal reagents

The reactivities of the highly electrophilic boranes ClB(C(6)F(5))(2) (1) and [HB(C(6)F(5))(2)](n) (2) towards a range of organometallic reagents featuring metals from Groups 7-10 have been investigated. Salt elimination chemistry is observed 1 between and the nucleophilic anions eta(5)-C(5)R(5))Fe(CO)(2)](-)(R = H or Me) and [Mn(CO)(5)](-), leading to the generation of the novel boryl complexes (eta(5)-C(5)R(5))Fe(CO)(2)B(C(6)F(5))(2)[R = H (3) or Me (4)] and (OC)(5)MnB(C(6)F(5))(2) (5). Such systems are designed to probe the extent to which the strongly sigma-donor boryl ligand can also act as a pi-acceptor; a variety of spectroscopic, structural and computational probes imply that even with such strongly electron withdrawing boryl substituents, the pi component of the metal-boron linkage is a relatively minor one. Similar reactivity is observed towards the hydridomanganese anion [(eta(5)-C(5)H(4)Me)Mn(CO)(2)H](-), generating a thermally labile product identified spectroscopically as (eta(5)-C(5)H(4)Me)Mn(CO)(2)(H)B(C(6)F(5))(2) (6). Boranes 1 and 2 display different patterns of reactivity towards low-valent platinum and rhodium complexes than those demonstrated previously for less electrophilic reagents. Thus, reaction of 1 with (Ph(3)P)(2)Pt(H(2)C=CH(2)) ultimately generates EtB(C(6)F(5))(2) (10) as the major boron-containing product, together with cis-(Ph(3)P)(2)PtCl(2) and trans-(Ph(3)P)(2)Pt(C(6)F(5))Cl (9). The cationic platinum hydride [(Ph(3)P)(3)PtH](+) is identified as an intermediate in the reaction pathway. Reaction of with [(Ph(3)P)(2)Rh(mu-Cl)](2), in toluene on the other hand, appears to proceed via ligand abstraction with both Ph(3)P.HB(C(6)F(5))(2) (11) and the arene rhodium(I) cation [(Ph(3)P)(2)Rh(eta(6)-C(6)H(5)Me)](+) (14) ultimately being formed.     

Transfer hydrogenation processes to mu(3)-alkylidyne groups on the organotitanium oxide [Ti(3)Cp*O(3)

The photochemical treatment of mu(3)-alkylidyne complexes [[TiCp*(mu-O)](3)(mu(3)-CR)] (R=H (1), Me (2), Cp*=eta(5)-C(5)Me(5)) with the amines (2,6-Me(2)C(6)H(3))NH(2), Et(2)NH, and Ph(2)NH and the imine Ph(2)C=NH leads to the partial hydrogenation of the alkylidyne moiety that is supported on the organometallic oxide, [Ti(3)Cp*O(3)], and the formation of new oxoderivatives [[TiCp*(3)(mu-CHR)(R'NR")] (R"=2,6-Me(2)C(6)H(3), R'=H, R=H (3), Me (4); R'=R"=Et, R=H (5), Me (6); R'=R"=Ph, R=H (7), Me (8)) and [[TiCp*(mu-O)](3)(mu-CHR)(N=CPh(2))] (R=H (9), R=Me (10)), respectively. A sequential transfer hydrogenation process occurs when complex 1 is treated with tBuNH(2), which initially gives the mu-methylene [[TiCp*(mu-O)](3)(mu-CH(2))(HNtBu)] (11) complex and finally, the alkyl derivative [[TiCp*(mu-O)](3)(mu-NtBu)Me] (12). Furthermore, irradiation of solutions of the mu(3)-alkylidyne complexes 1 or 2 in the presence of diamines o-C(6)H(4)(NH(2))(2) and H(2)NCH(2)CH(2)NH(2) (en) affords [[TiCp*(mu-O)](3)(mu(3)-eta(2)-NC(6)H(4)NH)] (13) and [[TiCp*(mu-O)](3)(mu(3)-eta(2)-NC(2)H(4)NH)] (14) by either methane or ethane elimination, respectively. In the reaction of 1 with en, an intermediate complex [[TiCp*(mu-O)](3)(mu-CH(2))(NHCH(2)CH(2)NH(2))] (15) is detected by (1)H NMR spectroscopy. Thermal treatment of the complexes 4-10 quantitatively regenerates the starting mu(3)-alkylidyne compounds and the amine R'(2)NH or the imine Ph(2)C=NH; however, heating of solutions of 3 or 4 in [D(6)]benzene or a equimolecular mixture of both at 170 degrees C produces methane, ethane, or both, and the complex [[TiCp*(mu-O)](3)[mu(3)-eta(2)-NC(6)H(3)(Me)CH(2)]] (16). The molecular structure of 8 has been established by single-crystal X-ray analysis.     

Molecular nitrides containing group 4 and 5 metals: single and double azatitanocubanes

Treatment of [[Ti(eta(5)-C(5)Me(5))(micro-NH)](3)(micro(3)-N)] (1) with the imido complexes [Ti(NAr)Cl(2)(py)(3)] (Ar=2,4,6-C(6)H(2)Me(3)) and [Ti(NtBu)Cl(2)(py)(3)] in toluene affords the single azatitanocubanes [[Cl(2)(ArN)Ti]( micro(3)-NH)(3)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]].(C(7)H(8)) (2.C(7)H(8)) and [[Cl(2)Ti](micro(3)-N)(2)(micro(3)-NH)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]] (3), respectively. Similar reactions of complex 1 with the niobium and tantalum imido derivatives [[M(NtBu)(NHtBu)Cl(2)(NH(2)tBu)](2)] (M=Nb, Ta) in toluene give the single azaheterometallocubanes [[Cl(2)(tBuN)M](micro(3)-N)(micro(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]] (M=Nb (4), Ta (5)), both complexes react with 2,4,6-trimethylaniline to yield the analogous species [[Cl(2)(ArN)M](micro(3)-N)(micro(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]].(C(7)H(8)) (Ar=2,4,6-C(6)H(2)Me(3), M=Nb (6.C(7)H(8)), Ta (7.C(7)H(8))). Also the azaheterodicubanes [M[micro(3)-N)(2)(micro(3)-NH)](2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)](2)].2C(7)H(8) [M=Ti (8.2C(7)H(8)), Zr (9.2C(7)H(8))], and [M[(micro(3)-N)(5)(micro(3)-NH)][Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)](2)].2 C(7)H(8) (Nb (10.2C(7)H(8)), Ta (11.2C(7)H(8))) were prepared from 1 and the homoleptic dimethylamido complex [M(NMe(2))(x)] (x=4, M=Ti, Zr; x=5, M=Nb, Ta) in toluene at 150 degrees C. X-ray crystal structure determinations were performed for 6 and 10, which revealed a cube- and double-cube-type core, respectively. For complexes 2 and 4-7 we observed and studied by DNMR a rotation or trigonal-twist of the organometallic ligands [[Ti(eta(5)-C(5)Me(5))(micro-NH)](3)(micro(3)-N)] (1) and [(micro(3)-N)(micro(3)-NH)(2)[Ti(3)(eta(5)-C(5)Me(5))(3)(micro(3)-N)]](1-). Density functional theory calculations were carried out on model complexes of 2, 3, and 8 to establish and understand their structures.     

Syntheses of functionalized ferratricarbadecaboranyl complexes

The reactions of nitriles (RCN) with arachno-4,6-C(2)B(7)H(12)(-) provide a general route to functionalized tricarbadecaboranyl anions, 6-R-nido-5,6,9-C(3)B(7)H(9)(-), R = C(6)H(5) (2(-)), NC(CH(2))(4) (4(-)), (p-BrC(6)H(4))(Me(3)SiO)CH (6(-)), C(14)H(11) (8(-)), and H(3)BNMe(2)(CH(2))(2) (10(-)). Further reaction of these anions with (eta(5)-C(5)H(5))Fe(CO)(2)I yields the functionalized ferratricarbadecaboranyl complexes 1-(eta(5)-C(5)H(5))-2-C(6)H(5)-closo-1,2,3,4-FeC(3)B(7)H(9) (3), 1-(eta(5)-C(5)H(5))-2-NC(CH(2))(4)-closo-1,2,3,4-FeC(3)B(7)H(9) (5), 1-(eta(5)-C(5)H(5))-2-[(p-BrC(6)H(4))(Me(3)SiO)CH]-closo-1,2,3,4-FeC(3)B(7)H(9) (7), 1-(eta(5)-C(5)H(5))-2-C(14)H(11)-closo-1,2,3,4-FeC(3)B(7)H(9) (9), and 1-(eta(5)-C(5)H(5))-2-H(3)BNMe(2)(CH(2))(2)-closo-1,2,3,4-FeC(3)B(7)H(9) (11). Reaction of 11 with DABCO (triethylenediamine) resulted in removal of the BH(3) group coordinated to the nitrogen of the side chain, giving 1-(eta(5)-C(5)H(5))-2-NMe(2)(CH(2))(2)-closo-1,2,3,4-FeC(3)B(7)H(9) (12). Crystallographic studies of complexes 3, 5, 7, 9, and 11 confirmed that these complexes are ferrocene analogues in which a formal Fe(2+) ion is sandwiched between the cyclopentadienyl and tricarbadecaboranyl monoanionic ligands. The metals are eta(6)-coordinated to the puckered six-membered face of the tricarbadecaboranyl cage, with the exopolyhedral substituents bonded to the low-coordinate carbon adjacent to the iron.     

Mild mono and double demethylation in dimethylsulfonium substituted ruthenacarborane complexes. A regioselective reaction

Reaction of [RuCl(2)(eta(6)-C(6)H(6))](2) with [10-(CH(3))(2)S-7,8-nido-C(2)B(9)H(10)](-) or [9-(CH(3))(2)S-7,8-nido-C(2)B(9)H(10)](-) afforded the expected cationic complexes [Ru(eta(5)-n-(CH(3))(2)S-7,8-C(2)B(9)H(10))(eta(6)-C(6)H(6))](+)(n= 10, (1); 9, (3)), but also the unexpected neutral Ru(eta(5)-10-HS-7,8-C(2)B(9)H(10))(eta(6)-C(6)H(6))(2) or Ru(eta(5)-9-(CH(3))S-7,8-C(2)B(9)H(10))(eta(6)-C(6)H(6))(4) by double and mono demethylation of the (CH(3))(2)S moiety, respectively.     

Multinuclear platinum(II)-amine complexes containing bis(aminopropyl)dicarba-closo-dodecaborane(12) ligands

Treatment of the bridging bidentate 1,Z-bis(aminopropyl)-1,Z-dicarba-closo-dodecaborane(12)(1,Z-bis(aminopropyl)-1,Z-carborane) ligands of the type 1,Z-[H(2)N(CH(2))(3)](2)-1,Z-C(2)B(10)H(10)(L(1), Z= 7, 5) or (L(2), Z= 12, 6) with two equivalents of trans-[PtClI(2)(NH(3))](-), followed by halogen ligand metathesis with AgOTf and HCl((aq)) afforded the novel diplatinum(II)-amine species cis-[[PtCl(2)(NH(3))](2)L(n)](7(n= 1) or 8(n= 2), respectively). Similarly, the reaction of L(1) or L(2) with the labile trans-[PtCl(dmf)(NH(3))(2)](+) afforded trans-[[PtCl(NH(3))(2)](2)L(n)](OTf)(2)(9(n= 1) or 10(n= 2), respectively) in good yield and purity. However, isolation of the analogous 1,2-carborane complexes was not possible owing to decomposition reactions that led to extensive degradation of the carborane cage and reduction of the metal centre. The mixed dinuclear complex [cis-[PtCl(2)(NH(3))]-L(1)-trans-[PtCl(NH(3))(2)]]OTf (19) was prepared by treatment of the Boc-protected amine ligand 1-[(Boc)(2)N(CH(2))(3)]-7-[H(2)N(CH(2))(3)]-1,7-C(2)B(10)H(10)(L(3), 15) with trans-[PtCl(dmf)(NH(3))(2)](+) to yield trans-[PtCl(NH(3))(2)L(3)]OTf (16), followed by acid deprotection of the pendant amine group, complexation with trans-[PtClI(2)(NH(3))](-), and halogen ligand metathesis using AgOTf and HCl((aq)). A novel trinuclear species containing 5 was prepared by the addition of two equivalents of 15 to the labile precursor cis-[Pt(dmf)(2)(NH(3))(2)](2+) followed by acid deprotection of the pendant amine groups. Further complexation with two equivalents of trans-[PtClI(2)(NH(3))](-) followed by halogen ligand metathesis using AgOTf and HCl((aq)) afforded the triplatinum(II)-amine species [cis-[Pt(NH(3))(2)(L(1))(2)]-cis-[PtCl(2)(NH(3))](2)](OTf)(2)(23). Complexes 7-10, 19 and 23 represent the first examples of multinuclear platinum(ii)-amine derivatives containing carborane cages. Preliminary in vitro cytotoxicity studies for selected complexes are also reported.     

Relaxed but highly compact diansa metallacyclophanes

A series of monoansa [μ-1,1'-PR-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) and diansa [8,8'-μ-(1',2'-benzene)-μ-1,1'-PR-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (R = Ph, (t)Bu) cobaltabisdicarbollidephanes have been synthesized, characterized and studied by NMR, MALDI-TOF-MS, UV-visible spectroscopy, cyclic voltammetry, and DFT calculations. Single crystal X-ray diffraction revealed a highly relaxed structure characterized by the title angle α of 3.8° ([7](-)), this being the smallest angle α for a metallacyclophane. In such compounds, the metal-to-phosphorus distance is less than the sum of their van der Waals radii. The availability of a phosphorus lone pair causes an electron delocalization through the metal, as shown by the abnormal (31)P NMR chemical shift. Remarkably, the combination of a phosphine donor and a phenyl acceptor moieties causes a synergistic effect that is observed through the different techniques used in this study. The importance of having an available lone pair is demonstrated by the oxidation of phosphorus with hydrogen peroxide, sulfur, and elemental black selenium to produce the corresponding P(V) compounds. When the electron lone pair is used to form the bond with the corresponding chalcogen atom, the communication between the donor and acceptor moieties on the diansa metallacyclophane is shut down.     

Periodic trends in hexanuclear actinide clusters

Four new Th(IV), U(IV), and Np(IV) hexanuclear clusters with 1,2-phenylenediphosphonate as the bridging ligand have been prepared by self-assembly at room temperature. The structures of Th(6)Tl(3)[C(6)H(4)(PO(3))(PO(3)H)](6)(NO(3))(7)(H(2)O)(6)·(NO(3))(2)·4H(2)O (Th6-3), (NH(4))(8.11)Np(12)Rb(3.89)[C(6)H(4)(PO(3))(PO(3)H)](12)(NO(3))(24)·15H(2)O (Np6-1), (NH(4))(4)U(12)Cs(8)[C(6)H(4)(PO(3))(PO(3)H)](12)(NO(3))(24)·18H(2)O (U6-1), and (NH(4))(4)U(12)Cs(2)[C(6)H(4)(PO(3))(PO(3)H)](12)(NO(3))(18)·40H(2)O (U6-2) are described and compared with other clusters of containing An(IV) or Ce(IV). All of the clusters share the common formula M(6)(H(2)O)(m)[C(6)H(3)(PO(3))(PO(3)H)](6)(NO(3))(n)((6-n)) (M = Ce, Th, U, Np, Pu). The metal centers are normally nine-coordinate, with five oxygen atoms from the ligand and an additional four either occupied by NO(3)(-) or H(2)O. It was found that the Ce, U, and Pu clusters favor both C(3i) and C(i) point groups, while Th only yields in C(i), and Np only C(3i). In the C(3i) clusters, there are two NO(3)(-) anions bonded to the metal centers. In the C(i) clusters, the number of NO(3)(-) anions varies from 0 to 2. The change in the ionic radius of the actinide ions tunes the cavity size of the clusters. The thorium clusters were found to accept larger ions including Cs(+) and Tl(+), whereas with uranium and later elements, only NH(4)(+) and/or Rb(+) reside in the center of the clusters.     

Restricted rotation in unbridged sandwich complexes: rotational behavior of closo-[Co(eta 5-NC4H4)(C2B9H11)] derivatives

Rotation about the centroid/metal/centroid axis in ferrocene is facile; the activation energy is 1-5 kcal mol(-1). The structurally similar sandwich complexes derived from closo-[3-Co(eta5-NC4H4)-1,2-C2B9H11] (1) have a different rotational habit. In 1, the cis rotamer in which the pyrrolyl nitrogen atom bisects the carboranyl cluster atoms is 3.5 kcal mol(-1) more stable in energy than the rotamer that is second lowest in energy. This cis rotamer is wide, spanning 216 degrees , and may be split into three rotamers of almost equal energy by substituting the N and the carboranyl carbon atoms adequately. To support this statement, closo-[3-Co(eta5-NC4H4)-1,2-(CH3)2-1,2-C2B9H9] (2), closo-[3-Co(eta5-NC4H4)-1,2-(mu-CH2)3-1,2-C2B9H9] 3, 2-->BF3, and 3-->BF3 have been prepared. Two rotamers are found at low temperature for 2-->BF(3) and 3-->BF3. Compounds 2, 3, and 1-->BF3 behave similarly to 1. Rotational energy barriers and the relative populations of the different energy states are calculated from 1H DNMR spectroscopy (DNMR, dynamic NMR). These results agree with those of semiempirical calculations. Without exception, the cis rotamer is energetically the more stable. The fixed conformation of 1 assists in elucidating the rotational preferences of the [3,3'-Co(1,2-C2B9H11)2]- ion in the absence of steric hindrance; the [3,3'-Co(1,2-C2B9H11)2]- ion is commonly accepted to present a cisoid orientation. Complex 1 is electronically similar to the [3,3'-Co(1,2-C2B9H11)2]- ion. Both have heteroatoms in the pi ligands, and they have the same electronegativity difference between the constituent atoms. This leads to a view of the [NC4H4]- as [7,8-C2B9H11]2- ion, with no steric implications. Therefore the [3,3'-Co(1,2-C2B9H11)2]- ion should be considered to have a cisoid structure, and the different rotamers observed to be the result of steric factors and of the interaction of the counterion with either B-H groups and/or ancillary ligands. The rotamer adopted is the one with the atoms holding the negative charges furthest apart.     

Half-pseudoferrocene cations from nucleophilic addition of o-carboranyl anions to the [(η6-mesitylene)2Fe](2+) dication

Reactions between the mesitylene (mes) dication [(η(6)-mes)(2)Fe](2+) (1a) [(PF(6)(-))(2) salt] and lithium o-carboranes Li[1-R-1,2-C(2)B(10)H(11)] (2) (R = H, 2a; Me, 2b; Ph, 2c) at low temperature (-60 °C, 1 h, followed by stirring for 2 h at r.t.) in THF resulted in a clean addition of the corresponding carborane anions to one of the unsubstituted arene sites in 1a, forming a series of orange monocations of general structure [(η(5)-mes-exo-6-{2-R-1,2-C(2)B(10)H(11)})Fe(η(6)-mes)](+) (3) (R = H, 3a; Me, 3b; Ph, 3c) which were isolated as PF(6)(-) salts (3PF(6)) in yields ranging 50-75%. Individual complexes were obtained on purification by LC or preparative TLC on a silica gel substrate, using MeCN-CH(2)Cl(2) mixtures as the mobile phase. Interestingly, the room-temperature reaction between 2a (threefold excess) and 1a(PF(6))(2) with a reverse order of addition of the reaction components yielded an orange salt [(η(5)-mes-exo-6-{1,2-C(2)B(10)H(11)})Fe(η(6)-mes)](+)[closo-nido-H(11)B(10)C(2)-C(2)B(10)H(12)](-) (3acCA) (cCA = conjucto-carborane anion = [closo-nido-H(11)B(10)C(2)-C(2)B(10)H(12)](-)) as a sole product in 71% yield. The formation of this conjucto anion can be taken as a strong support for the participation of a radical-chain mechanism in the ostensible nucleophilic addition which we suppose to be initiated by the formation of the [(mes)(2)Fe(+)]˙ radical cation. The structures of both 3PF(6) and 3acCA have been established by X-ray diffraction and the constitution of all compounds isolated is in agreement with elemental analyses, multinuclear NMR data, and MS spectra.     

Relevance of the electronegativity of boron in eta5-coordinating ligands: regioselective monoalkylation and monoarylation in cobaltabisdicarbollide [3,3'-Co(1,2-C2B9H11)2]- clusters

Regioselective monoalkylation and monoarylation in cobaltabisdicarbollide clusters has been achieved starting from Cs[8-I-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))] by cross-coupling reactions between a B-I fragment and an appropriate Grignard reagent in the presence of a Pd catalyst and CuI. A considerable number of monoalkylated and monoarylated derivatives have been synthesized, which allowed study of the influence of boron in metallocene-type ligands and the effect of alkyl and aryl substituents on boron in boron anionic clusters. Experimental data from UV/Vis spectroscopy, E(1/2) measurements, and X-ray diffraction analysis, and supported by EHMO and ab initio analyses, indicate that the participation of metal d orbitals in the HOMO is less than that in typical metallocene complexes. This can be explained in terms of the lower electronegativity of boron compared to carbon. Related to this is the -I character of alkyl groups when bonded to boron in boron anionic clusters, contrary to the common belief that alkyl groups are generally electron-releasing moieties.     

Syntheses and structural and electrochemical characterizations of vanadatricarbadecaboranyl analogues of vanadocene and the structural characterization of the [Li(CH(3)CN)2+](6-CH(3)-nido-5,6,9-C(3)B(7)H(9-) tricarbadecaboranyl anion.

A single-crystal X-ray determination of the [Li(CH(3)CN)(2)(+)](6-CH(3)-nido-5,6,9-C(3)B(7)H(9)(-)) salt has shown that the 6-CH(3)-nido-5,6,9-C(3)B(7)H(9)(-) tricarbadecaboranyl anion has a nido-cage geometry based on an octadecahedron missing the unique six-coordinate vertex. The resulting six-membered open face is puckered, with two of the cage carbons (C6 and C9) occupying the low-coordinate cage positions above the plane of the four remaining atoms (C5, B7, B8, and B10). The Li(+) ion is centered over the open face and is solvated by two acetonitrile molecules. The reactions of the 6-CH(3)-nido-5,6,9-C(3)B(7)H(9)(-) anion with various vanadium halide salts, including VCl(4), VCl(3), and VBr(2), each resulted in the isolation of the same five paramagnetic products (2-6) of composition V(CH(3)-C(3)B(7)H(9))(2). X-ray crystallographic determinations of 2-5 showed that the complexes consist of two octadecahedral VC(3)B(7) fragments sharing a common vanadium vertex and established their structures as commo-V-(1-V-4'-CH(3)-2',3',4'-C(3)B(7)H(9))(1-V-2-CH(3)-2,3,4-C(3)B(7)H(9)) (2), commo-V-(1-V-5'-CH(3)-2',3',5'-C(3)B(7)H(9))(1-V-4-CH(3)-2,3,4-C(3)B(7)H(9)) (3), commo-V-(1-V-5'-CH(3)-2',3',5'-C(3)B(7)H(9))(1-V-2-CH(3)-2,3,4-C(3)B(7)H(9)) (4), and commo-V-(1-V-2-CH(3)-2,3,4-C(3)B(7)H(9))(2) (5). These complexes can be considered as tricarbadecaboranyl analogues of vanadocene, (eta(5)-C(5)H(5))(2)V. However, unlike vanadocene, these complexes are air- and moisture-stable and have only one unpaired electron. The five complexes differ with respect to one another in that they either (1) contain different enantiomeric forms of the CH(3)-C(3)B(7)H(9) cages, (2) have a different twist orientation of the two cages, or (3) have the methyl group of the CH(3)-C(3)B(7)H(9) cage located in either the 2 or 4 position of the cage. Subsequent attempts to oxidize the compounds with reagents such as Br(2) and Ag(+) were unsuccessful, illustrating the ability of the tricarbadecaboranyl anion to stabilize metals in low oxidation states. Consistent with this, both the electrochemical oxidation and the reduction of 2 were much more positive than those of the same oxidation state changes in vanadocene. The one-electron reduction of 2 is a remarkable 2.9 V positive of that of Cp(2)V.     

Synthesis with structural and electronic characterization of homoleptic Fe(II)- and Fe(III)-fluorinated phenolate complexes

Four Fe(III) compounds and one Fe(II) compound containing mononuclear, homoleptic, fluorinated phenolate anions of the form [Fe(OAr)(m)](n-) have been prepared in which Ar(F) = C(6)F(5) and Ar' = 3,5-C(6)(CF(3))(2)H(3): (Ph(4)P)(2)[Fe(OAr(F))(5)], 1, (Me(4)N)(2)[Fe(OAr(F))(5)], 2, {K(18-crown-6)}(2)[Fe(OAr(F))(5)], 3a, {K(18-crown-6)}(2)[Fe(OAr')(5)], 3b, and {K(18-crown-6)}(2)[Fe(OAr(F))(4)], 6. Two dinuclear Fe(III) compounds have also been prepared: {K(18-crown-6)}(2)[(OAr(F))(3)Fe(μ(2)-O)Fe(OAr(F))(3)], 4, and {K(18-crown-6)}(2)[(OAr(F))(3)Fe(μ(2)-OAr(F))(2)Fe(OAr(F))(3)], 5. These compounds have been characterized with UV-vis spectroscopy, elemental analysis, Evans method susceptibility, and X-ray crystallography. All-electron, geometry-optimized DFT calculations on four [Ti(IV)(OAr)(4)] and four [Fe(III)(OAr)(4)](-) species (Ar = 2,3,5,6-C(6)Me(4)H, C(6)H(5), 2,4,6-C(6)Cl(3)H(2), C(6)F(5)) with GGA-BP and hybrid B3LYP basis sets demonstrated that, under D(2d) symmetry, π donation from the O 2p orbitals is primarily into the d(xy) and d(z(2)) orbitals. The degree of donation is qualitatively consistent with expectations based on ligand Br?nsted basicity and supports the contention that fluorinated phenolate ligands facilitate isolation of nonbridged homoleptic complexes due to their reduced π basicity at oxygen.     

NOE and PGSE NMR spectroscopic studies of solution structure and aggregation in metallocenium ion-pairs

The solution structures of the metallocenium homogeneous polymerization catalyst ion-pairs [Cp(2)ZrMe](+)[MeB(C(6)F(5))(3)](-) (1), [(1,2-Me(2)Cp)(2)ZrMe](+)[MeB(C(6)F(5))(3)](-) (2), [(Me(2)SiCp(2))ZrMe](+)[MeB(C(6)F(5))(3)](-) (3), [Me(2)C(Fluorenyl)(Cp)ZrMe](+)[FPBA](-) (FPBA = tris(2,2',2' '-nonafluorobiphenyl)fluoroaluminate) (4), [rac-Et(Indenyl)(2)ZrMe](+)[FPBA](-) (5), [(Me(5)Cp)(2)ThMe](+)[B(C(6)F(5))(4)](-) (6), [(Me(2)SiCp(2))Zr(Me)(THF)](+)[MeB(C(6)F(5))(3)](-) (7), [(Me(2)SiCp(2))Zr(Me)(PPh(3))](+)[MeB(C(6)F(5))(3)](-) (8), [(Me(2)SiCp(2))Zr(Me)(THF)](+)[B(C(6)F(5))(4)](-) (9), [(Me(2)Si(Me(4)Cp)(t-BuN)Zr(Me)(solvent)](+)[B(C(6)F(5))(4)](-) (solvent = benzene, toluene) (10), [(Cp(2)ZrMe)(2)(mu-Me)](+)[MePBB](-) (PBB = tris(2,2',2"-nonafluorobiphenyl)borane) (11), and [(Cp(2)Zr)(2)(mu-CH(2))(mu-Me)](+)[MePBB](-) (12), having the counteranion in the inner (1, 3, 4, 5, and 6) or outer (7, 8, 9, 10, 11, and 12) coordination sphere, have been investigated for the first time in solvents with low relative permittivity such as benzene or toluene by (1)H NOESY and (1)H,(19)F HOESY NMR spectroscopy. It is found that the average interionic solution structures of the inner sphere contact ion-pairs are similar to those in the solid state with the anion B-Me (1, 3) or Al-F (5) vectors oriented toward the free zirconium coordination site. The HOESY spectrum of complex 6 is in agreement with the reported solid-state structure. In contrast, in outer sphere contact ion-pairs 7, 8, 9, and 10, the anion is located far from the Zr-Me(+) moiety and much nearer to the Me(2)Si bridge than in 3. The interionic structure of 8 is concentration-dependent, and for concentrations greater than 2 mM, a loss of structural localization is observed. PGSE NMR measurements as a function of concentration (0.1-5.0 mM) indicate that the tendency to form aggregates of nuclearity higher than simple ion-pairs is dependent on whether the anion is in the inner or outer coordination sphere of the metallocenium cation. Complexes 2, 3, 4, 5, and 6 show no evidence of aggregation up to 5 mM (well above concentrations typically used in catalysis) or at the limit of saturated solutions (complexes 3 and 6), while concentration-dependent behavior is observed for complexes 7, 8, 10, and 11. These outer sphere ion-pairs begin to exhibit significant evidence for ion-quadruples in solutions having concentrations greater than 0.5 mM with the tendency to aggregate being a function of metal ligation and anion structure. Above 2 mM, compound 8 exists as higher aggregates that are probably responsible for the loss of interionic structural specificity.     

Rearrangements of phosphinoimines to phosphine-imines in ruthenium chelate complexes

Thermal reaction of 1:1 mixtures of the RuCl(2)(PPh(3))(3) and phosphinoimine R(2)PN=CPh(2) (R = Ph, iPr, Me) at 140 °C results in isolation of the dimeric species [RuCl(μ-Cl)(PPh(3))(C(6)H(4)(PPh(2))C(Ph)NH)](2) (R = Ph 1, iPr 2, Me 3) containing phosphine-imine chelating ligands. Subsequent reaction of 1 and 3 with one equivalent of pyridine at room temperature give RuCl(2)(PPh(3))(py)(C(6)H(4)(PR(2))C(Ph)NH) (R = Ph 4, Me 5). Excess pyridine reacts with 2 to give a mixture of the cis and trans-isomers of RuCl(2)(py)(2)(C(6)H(4)(PiPr(2))C(Ph)NH) 6 and 7 respectively. Treatment of 5 with excess PPh(3) affords RuCl(2)(PPh(3))(2)(C(6)H(4)(PMe(2))C(Ph)NH) 8. Aspects of the mechanism of the thermal rearrangements of the phosphinoimine to the phosphine-imine ligands are considered and the isolation of RuCl(2)(Ph(2)PN=CPh(2))(SIMes)(CHPh) 9 and RuCl(2)(PPh(3))(2)(HN=C(Ph)C(6)H(4)) 10 provide support for a proposed mechanism involving a intermediate containing a Ru-bound metallated aryl-imine fragment.     

Polyoxomolybdodiphosphonates: examples incorporating ethylidenepyridines

We have synthesized and structurally characterized three pyridylethylidene-functionalized diphosphonate-containing polyoxomolybdates, [{Mo(VI)O(3)}(2){Mo(V)(2)O(4)}{HO(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)](6-) (1), [{Mo(VI)(2)O(6)}(2){Mo(V)(2)O(4)}{O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)](8-) (2), and [{Mo(V)(2)O(4)(H(2)O)}(4){O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(4)](12-) (3). Polyanions 1-3 were prepared in a one-pot reaction of the dinuclear, dicationic {Mo(V)(2)O(4)(H(2)O)(6)}(2+) with 1-hydroxo-2-(3-pyridyl)ethylidenediphosphonate (Risedronic acid) in aqueous solution. Polyanions 1 and 2 are mixed-valent Mo(VI/V) species with open tetranuclear and hexanuclear structures, respectively, containing two diphosphonate groups. Polyanion 3 is a cyclic octanuclear structure based on four {Mo(V)(2)O(4)(H(2)O)} units and four diphosphonates. Polyanions 1 and 2 crystallized as guanidinium salts [C(NH(2))(3)](5)H[{Mo(VI)O(3)}(2){Mo(V)(2)O(4)}{HO(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)]·13H(2)O (1a) and [C(NH(2))(3)](6)H(2)[{Mo(VI)(2)O(6)}(2){Mo(V)(2)O(4)}{O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)]·10H(2)O (2a), whereas polyanion 3 crystallized as a mixed sodium-guanidinium salt, Na(8)[C(NH(2))(3)](4)[{Mo(V)(2)O(4)(H(2)O)}(4){O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(4)]·8H(2)O (3a). The compounds were characterized in the solid state by single-crystal X-ray diffraction, IR spectroscopy, and thermogravimetric and elemental analyses. The formation of polyanions 1 and 3 is very sensitive to the pH value of the reaction solution, with exclusive formation of 1 above pH 7.4 and 3 below pH 6.6. Detailed solution studies by multinuclear NMR spectrometry were performed to study the equilibrium between these two compounds. Polyanion 2 was insoluble in all common solvents. Detailed computational studies on the solution phases of 1 and 3 indicated the stability of these polyanions in solution, in complete agreement with the experimental findings.