Separation of aromatic hydrophobic sulfonates by micellar electrokinetic chromatography

Two different buffer systems for the separation of 12 aromatic hydrophobic sulfonates by micellar electrokinetic chromatography (MEKC) were developed. The following buffer systems were used: aqueous phosphate buffers containing either cetyltrimethylammonium bromide (CTAB) or sodium dodecyl sulfate (SDS). Eleven aromatic sulfonates were simultaneously separated in less than 35 min employing 20 mM phosphate buffer, pH 7.0 containing 50 mM SDS and 10% of acetonitrile.     

Separation of Six Pyridoncarboylxic Acid Derivatives by Micellar and Microemulsion Electrokinetic Chromatography

Micellar electrokinetic chromatography (MEKC) and microemulsion electrokinetic chromatography (MEEKC) are two kinds of electrokinetic capillary chromatography (EKC), which are characterized of high solubilization capacity and separation efficiency. In our previous work, some polar organic compounds and hydrophobic neutral compounds were separated successfully by EKC1-3. In this paper, these methods were used for separating six pyridoncarboylxic acid derivatives with similar structures. T…     

Profiling of cocaine by micellar electrokinetic chromatography

The potential of micellar electrokinetic chromatography (MEKC) for the profiling of cocaine samples is described. An MEKC system containing sodium dodecyl sulfate (SDS) and methanol was optimized using a test mixture of cocaine, its common impurities (benzoylecgonine, norcocaine, tropacocaine, and trans-cinnamoylcocaine), and several degradation products. The effect of pH, percentage modifier, and concentration surfactant on the separation has been investigated. The optimal separation buffer for cocaine samples consisted of 75 mM SDS, 17.5% methanol, and 25 mM borate (pH 8.3) and was well suited to separate components of diverse polarity in one run. Various cocaine seizures have been analyzed with the MEKC system and their signatures were compared. The electrokinetic chromatograms obtained were characteristic, and differences and similarities among the samples could easily be observed. Several impurities were identified in the samples by means of migration times and comparison of recorded and library UV spectra. The composition of the samples was determined semiquantitatively using relative corrected peak areas.     

Separation and selectivity in micellar electrokinetic chromatography using sodium dodecyl sulfate micelles or Tween 20-modified mixed micelles

The separation and selectivity of eight aromatic compounds ranging from hydrophilic to hydrophobic properties in micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate (SDS) micelles or Tween 20-modified mixed micelles were investigated. The effect of different operation conditions such as SDS and Tween 20 modifier surfactant concentration, buffer pH, and applied voltage was studied. The resolution and selectivity of analytes could be markedly affected by changing the SDS micelle concentration or Tween 20 content in the mixed micelles. Applied voltage and pH of running buffers were used mainly to shorten the separation time. Complete separation of eight analytes could be achieved with an appropriate choice of the concentration of SDS micelles or Tween 20-modified mixed micelles. Quicker elution and better precision could be obtained with SDS-Tween 20 mixed micelles than with SDS micelles. The mechanisms that migration order of those analytes was mainly based on their structures and solute-micelle interactions, including hydrophobic, electrostatic, and hydrogen bonding interactions, were discussed.     

Comparison of microemulsion electrokinetic chromatography and micellar electrokinetic chromatography as methods for the analysis of ten benzophenones

Microemulsion electrokinetic chromatography (MEEKC) and micellar electrokinetic chromatograpy (MEKC) were compared for their abilities to separate and detect ten similar benzophenones, which are commonly used as UV filters in various plastic and cosmetic products. Sodium dodecyl sulfate (SDS) concentration and column temperature rarely affected separation resolution for MEEKC, but separation of benzophenones could be improved by changing the SDS concentration and column temperature for MEKC. Buffer pH and ethanol (organic modifier) were found to markedly influence the separation selectivity for both MEEKC and MEKC systems. In addition, a higher electric voltage improved the separation efficiency without a noticeable reduction in separation resolution for MEEKC, whereas it caused a poor separation resolution for the MEKC system.     

Comparing micellar electrokinetic chromatography and microemulsion electrokinetic chromatography for the analysis of preservatives in pharmaceutical and cosmetic products

In this study, separation and determination of nine preservatives ranging from hydrophilic to hydrophobic properties, which are commonly used as additives in various pharmaceutical and cosmetic products, by micellar electrokinetic chromatograpy (MEKC) and microemulsion electrokinetic chromatography (MEEKC) were compared. The effect of temperature, buffer pH, and concentration of surfactant on separation were examined. In MEKC, the separation resolution of preservatives improved markedly by changing the sodium dodecyl sulfate concentration. Temperature and pH of running buffers were used mainly to shorten the magnitude of separation time. However, in order to detect all preservatives in a single run in a MEEKC system, a microemulsion of higher pH was needed. The separation resolution was improved dramatically by changing temperature, and a higher concentration of SDS was necessary for maintaining a stable microemulsion solution, therefore the separation of the nine preservatives in MEEKC took longer than in MEKC. An optimum MEKC method for separation of the nine preservatives was obtained within 9.0 min with a running buffer of pH 9.0 containing 20 mM SDS at 25 degrees C. A separation with baseline resolution was also obtained within 16 min using a microemulsion of pH 9.5 which composed of SDS, 1-butanol, and octane, and a shorter capillary column at 34 degrees C. Finally, the developed MEKC and MEEKC methods determined successfully preservatives in various cosmetic and pharmaceutical products.     

Separation and determination of lignans from seeds of Schisandra species by micellar electrokinetic capillary chromatography using ionic liquid as modifier

In this paper, a micellar electrokinetic chromatographic (MEKC) method using ionic liquid as modifier for the quantification of the active components of lignans found in the medicinal herbs Schisandra species was developed for the first time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds, the addition of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as BMIM-BF4 and SDS concentration, applied voltage, background electrolyte pH and concentration, were evaluated. Under the optimal conditions (5 mM borate-5 mM phosphate buffer in the presence of 20 mM SDS and 10 mM BMIM-BF4, pH 9.2, applied voltage 25 kV and detection at 254 nm), the method successfully applied to the determination of lignans in extracts of Schisandra chinensis (Turcz.) Baill. and Schisandra henryi C.B. Clarke in less than 13 min. The separation mechanism was also discussed.     

Separation of aromatic sulfonate compounds by coelectroosmotic micellar electrokinetic chromatography

Summary Coelectroosmotic micellar electrokinetic chromatography (coelectroosmotic MEKC) has been investigated for the separation of twelve aromatic sulfonate compounds. The advantage of this method is that it combines the efficient separation characteristic of MEKC and the short analysis time of the coelectroosmotic mode. MEKC was performed with either cetyltrimethylammonium bromide (CTAB) or polyethylene glycol dodecyl ether (Brij 35) surfactants as pseudostationary phases and 2-propanol as organic modifier. The electroosmotic Flow (EOF) was reversed by adding two types of EOF modifier, an alkylammonium salt (cetyltrimethylammonium bromide, CTAB) or a cationic polyelectrolyte (hexadimetrine bromide, HDB). The surfactant concentration, applied voltage, and temperature were optimized, the influence of 2-propanol on the MEKC resolution of the compounds was studied. The effect of the osmotic modifier on the separation was also investigated.     

Separation of natural pyrethrum extracts using micellar electrokinetic chromatography

The separation of the six pyrethrin esters in a technical pyrethrum extract (Riedel-de-Ha?n, Cresent Chemical Co. Inc. Hauppauge, NY, USA) by micellar electrokinetic chromatography (MEKC) using both sodium dodecyl sulfate (SDS) and a polymerized surfactant as pseudo-stationary phases has been investigated and optimized. Parameters such as pH, SDS and polymerized sodium N-undecyl sulfate (poly-SUS) concentration, type and concentration of background electrolyte and organic modifier, as well as the acetonitrile/water ratio in the sample were studied to optimize the resolution, efficiency, and analysis time. An optimized separation of the six pyrethrin esters was achieved in 25 min with 25 mM Tris, buffered at pH 9, containing 30 mM SDS, 25% (v/v) acetonitrile, and an equal volume ratio of acetonitrile/water sample matrix at a voltage of 25 kV. The use of 0.5% (w/v) poly-SUS enhanced resolution of the pyrethrin esters and shortened the total analysis time from 25 to 20 min, compared to the SDS mediated separation. The optimized MEKC results are compared to the HPLC separation of these esters and show an improvement in efficiency and total analysis time.     

Molecularly imprinted CEC sorbents: investigations into polymer preparation and electrolyte composition

The influence of the sorbent preparation protocol and separation parameters on the selectivity and chromatographic efficiency of super-porous molecularly imprinted polymer (MIP) monoliths in capillary electrochromatography (CEC) was studied. Chiral templates were employed and enantiomer separation and resolution were used as measures of imprint selectivity and column efficiency, respectively; the latter was in addition studied by chromatography of non-related aromatic structures. The polymer preparation was varied with respect to monomer composition in the pre-polymerisation mixture and also the use of single versus multiple template(s). The separation parameters investigated were type and content of organic solvent and surfactant modifier in the electrolyte. It was found that acetone and acetonitrile in buffer mixtures provided enantiomer separation of enantiomers of the template and also structural analogues; however, the degree of separation was greatly influenced by the content in the electrolyte. Three surfactants, sodium dodecylsulfate (SDS), cetyltrimethylammonium bromide (CTAB) and polyoxyethylene sorbitanmonolaurate (Tween 20), were examined as electrolyte modifiers. It was found that addition of SDS decreased and CTAB and Tween 20 increased the enantiomer separation. SDS and CTAB could be used up to 1 mM concentration whereas Tween could be used up to 90 mM concentration without causing baseline disturbances. The effects found and demonstrated strongly suggest that these parameters are to be considered during optimisation of an MIP-CEC system.     

Cationic double-chained surfactant as pseudostationary phase in micellar electrokinetic capillary chromatography for drug separations

The cationic double-chained surfactant didodecyldimethylammonium bromide (DDAB) was used as pseudostationary phase (PSP) in micellar electrokinetic capillary chromatography (MEKC). Its performance on the three kinds of drugs, i.e., basic, acidic, and neutral drugs, was systematically investigated. Nicotine, cotinine, caffeine, lidocaine, and procaine were selected as the model basic drugs. Good baseline separation and high efficiency were obtained under the optimal separation condition that consisted of 50mM phosphate (pH 4.0) and 0.08 mM DDAB. Three basic phenylenediamine isomers can also be well separated with DDAB in buffer. In addition, DDAB can form cationic bilayer on the capillary wall, thus the wall adsorption of basic analytes was greatly suppressed. Compared with commonly used CTAB, the separation of basic drugs was significantly improved with a much lower amount of DDAB present in the buffer. The DDAB-involved MEKC also showed superiority to CTAB upon the separation of acidic drugs, amoxicillin and ampicillin. In the case of neutral compounds, a good separation of resorcinol, 1-naphthol and 2-naphthol was achieved with 0.1mM DDAB and 30% (v/v) acetonitrile (ACN) present in buffer. Hence, it was concluded that the double-chained cationic surfactant DDAB can be a good substitute for traditional single-chained surfactant CTAB in MEKC.     

Highly efficient separation of isomeric epoxy fatty acids by micellar electrokinetic chromatography

A capillary electrophoresis (CE) method has been developed for simple and direct separation of cis- and trans-12,13-epoxy-9(Z)-octadecenoic acid and 9,10-epoxy-12(Z)-octadecenoic acid isomers. Separation was performed in micellar electrokinetic capillary chromatography (MEKC) using a buffer consisting of 25 mM borate (pH 9.20), 10 mM sodium dodecyl sulfate (SDS) and 10% v/v acetonitrile. The key variables, concentrations of SDS and organic modifier, were optimized by the application of a factorial experimental design. The use of a low micellar concentration, just above critical micelle concentration (CMC), in a background electrolyte containing an organic modifier not only made it possible to dissolve and separate highly hydrophobic fatty acid isomers, but also resulted in improved separation efficiency and selectivity. Separation efficiency up to 4 x 10(5) theoretical plates/m was achieved under an optimized condition. Also investigated were the influence of temperature on separation and the effect of organic modifier concentration on the dynamic exchange of the analytes between micelles and the bulk of the buffer solution. Direct UV was applied for detection of the fatty acids.     

Compositional effects on electrophoretic and chromatographic figures of merit in electrokinetic chromatography with cetyltrimethylammonium bromide/sodium octyl sulfate vesicles as the pseudostationary phase. Part 1: effect of the phase ratio

The effect of the phase ratio on the electrophoretic and chromatographic properties of unilamellar vesicles comprised of cetyltrimethylammonium bromide (CTAB) and sodium octyl sulfate (SOS) was investigated in EKC. The surfactant concentration of the vesicles was 0.9, 1.2, 1.5, and 1.8% w/v, with a mole ratio of 1:3.66 (CTAB/SOS). Results were compared to those obtained using SDS micelles at concentrations of 1.0% (w/v, 35 mM) and 1.5% (52 mM). The CTAB/SOS vesicles (0.9-1.8% w/v) provided a significantly larger elution range (5.7 < or = t(ves)/t(0) < or = 8.7) and greater hydrophobic (methylene) selectivity (2.8 < or = alpha(CH2) < or = 3.1) than SDS micelles (3.1 < or = t(mc)/t(0) < or = 3.3; alpha(CH2) = 2.2). Whereas the larger elution range can be attributed to the 25% reduction in EOF due to the interaction of unaggregated CTAB cations and the negatively charged capillary wall, the higher methylene selectivity is likely due to the lower concentration of water expected in the CTAB/SOS vesicle bilayer compared to the Palisades layer of SDS micelles. For a given phase ratio, CTAB/SOS vesicles are somewhat less retentive than SDS micelles, although retention factors comparable to those observed in 1.0-1.5% SDS can be obtained with 1.5-1.8% CTAB/SOS. A linear relationship was observed between phase ratio and retention factor, confirming the validity of the phase ratio model for these vesicles. Unique polar group selectivities and positional isomer shape selectivities were obtained with CTAB/SOS vesicles, with both types of selectivities being nearly independent of the phase ratio. For four sets of positional isomers, the elution order was always para < ortho < meta. Finally, the thermodynamics of solute retention was qualitatively similar to that reported for other surfactant aggregates (micelles and microemulsions); the enthalpic contribution to retention was consistently favorable for all compounds, whereas the entropic contribution was favorable only to hydrophobic solutes.     

A comparison between electrokinetic capillary chromatography and absorption spectroscopy for the analysis of peptide-micelle association by weak hydrophobic interactions

Micellar electrokinetic capillary chromatography (MEKC) was compared to absorption spectroscopy to estimate equilibrium association constans (K(as)) for peptide-micelle systems involving three peptides (leucine-enkephalin, methionine-enkephalin and leucine-phenylalanine (LF)) and two surfactant micelles (sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB)). Buffer pH was chosen to minimize purely electrostatic interactions between peptides and micelles that could not be interrogated by absorption spectroscopy. Viscosity-corrected MEKC mobilities gave reasonably similar estimates of K(as) between the two methods for all three peptide-SDS micelle systems, with K(as) values ranging from 13.7 +/- 0.3 to 49 +/- 1 M(-1). For CTAB, estimates of K(as) for LF-CTAB micelle association were of the same order of magnitude as the SDS micelle by the two methods of estimation. On the other hand, enkephalin-CTAB micelle binding was about 10 times stronger (K(as) = 122 +/- 3 M(-1) to 311 +/- 9 M(-1)) than the enkephalin-SDS micelle binding. In addition, MEKC underestimated the K(as) values relative to spectroscopy by a factor of 2-3 for the enkephalin-CTAB system.     

Determination of the chiral and achiral related substances of methotrexate by cyclodextrin-modified micellar electrokinetic chromatography

A cyclodextrin-modified micellar electrokinetic chromatographic (CD-MEKC) method for the determination of the most important potential impurities of methotrexate (MTX): 2,4-diamino-6-(hydroxymethyl)pteridine, aminopterine hydrate, 4-[N-(2-amino-4-hydroxy-6-pteridinylmethyl)-N-methylamino] benzoic acid, 4-[N-(2,4-diamino-6-pteridinylmethyl)-N-methylamino] benzoic acid, and the distomer D-MTX is presented. The MEKC separation of these compounds was optimized by applying a step-by-step approach. The addition of beta-CD to a conventional MEKC system, based on sodium dodecyl sulfate (SDS) as surfactant, showed to be essential for the enantioresolution of racemic MTX as well as for the separation of the achiral impurities. To achieve high-resolution factor between the peaks adjacent to the main component (L-MTX), as required in the analysis of related impurities, the separation conditions were stressed; in particular, the addition of methanol to the CD-MEKC system resulted in a very effective choice. Under the optimized final conditions (100 mM SDS and 45 mM beta-CD in a mixture of 50 mM borate buffer, pH 9.30-methanol (75:25 v/v)), the method was validated showing a general adequate accuracy (93-106% recovery) in the determination of L-MTX related substances at the impurity level of 0.12% w/w with a relative standard deviation (RSD)% lower than 8% (n = 4). The method was successfully applied to the analysis of pharmaceuticals (tablets and injections) which showed to contain the distomer D-MTX as major impurity and aminopterine hydrate as a further related substance in the commercial tablets.     

Monomeric and polymeric anionic gemini surfactants and mixed surfactant systems in micellar electrokinetic chromatography. Part I: characterization and application as novel pseudostationary phases

Sodium di(undecenyl) tartarate monomer (SDUT), a vesicle-forming amphiphilic compound possessing two hydrophilic carboxylate head groups and two hydrophobic undecenyl chains gemini surfactant, was prepared and polymerized to form a polymeric gemini surfactant (i.e., poly-SDUT). These anionic surfactant systems with carboxylate (SDUT and poly-SDUT) and sulfate (sodium dodecyl sulfate, SDS) head groups as well as mixed surfactant systems (SDS/SDUT, SDS/poly-SDUT, and SDUT/poly-SDUT) were then applied as novel pseudostationary phases in micellar electrokinetic chromatography (MEKC). The SDUT and poly-SDUT were characterized using various analytical techniques. Retention factors of 36 benzene derivatives were calculated in 20 mM phosphate buffer of each surfactant system. The retention factor values of the test solutes show that there are distinctive selectivity differences between the surfactant systems. Solute-pseudostationary phase interactions in MEKC were also examined by determining the free energy of transfer of the substituted functional groups from the aqueous buffer phase into the pseudostationary phase.     

Modified micellar electrokinetic chromatography in the analysis of catechins and xanthines in chocolate

Modified micellar electrokinetic chromatography (MEKC) analysis of monomeric flavanols (catechin and epicatechin) and methylxanthines (caffeine and theobromine) in chocolate and cocoa was performed by using sodium dodecyl sulfate (SDS) as a principal component of the running buffer. Because of the reported poor stability of catechins in alkaline solutions, acidic conditions (pH 2.5) were chosen and consequently the electroosmotic flow (EOF) was significantly suppressed; this resulted in a fast anodic migration of the analytes partitioned into the SDS micelles. Under these conditions, variations of either pH value in acidic range or SDS concentration, showed to be not suitable to modulate the selectivity. To overcome this limit, use of additives to the SDS-based running buffer was successfully applied and three different systems were optimized for the separation of (+)-catechin, (-)-epicatechin, caffeine, and theobromine in chocolate and cocoa powder samples. In particular, two mixed micelle systems were applied; the first consisted of a mixture of SDS and 3-[(3-cholamidopropyl)dimethylammonio]-1-propansulfonate (CHAPS) with a composition of 90 mM and 10 mM, respectively; the second was SDS and taurodeoxycholic acid sodium salt (TDC) with a composition of 70 mM and 30 mM, respectively. A further MEKC approach was developed by addition of 10 mM hydroxypropyl-beta-cyclodextrin (HP-beta-CD) to the SDS solution (90 mM); it provided a useful cyclodextrin(CD)-modified MEKC. By applying the optimized conditions, different separation profiles of the flavanols and methylxanthines were obtained showing interesting potential of these combined systems; their integrated application showed to be useful for the identification of the low level of (+)-catechin in certain real samples. The CD-MEKC approach was validated and applied to the determination of catechins and methylxanthines in aqueous extracts from four different commercial chocolate types (black and milk) and two cocoa powders.     

Comparison of microemulsion electrokinetic chromatography and micellar electrokinetic chromatography methods for the analysis of phenolic compounds

In this study, microemulsion electrokinetic chromatography (MEEKC) and micellar electrokinetic chromatography (MEKC) were compared for their abilities to separate and detect thirteen phenolic compounds (syringic acid, p-coumaric acid, vanillic acid, caffeic acid, gallic acid, 3,4-dihydroxybenzoic acid, 4-hydroxybenzoic acid, (+)-catechin, (-)-epigallocatechin, (-)-epicatechin gallate, (-)-epigallocatechin gallate, (-)-epicatechin, and (-)-gallocatechin), and two other ingredients (caffeine and theophylline) in teas and grapes. Separation of phenolic compounds was improved by changing the SDS concentration for MEEKC, but the SDS concentration rarely affected the resolution for MEKC. Organic modifier (acetonitrile or methanol) was found to markedly influence the resolution and selectivity for both MEEKC and MEKC systems. In addition, a higher voltage and a higher column temperature improved the separation efficiency without any noticeable reduction in resolution for MEEKC whereas they caused a poor resolution for the MEKC system. Although separations with baseline resolution were achieved by the optimized MEEKC and MEKC methods, the separation selectivity resulting from the proposed MEEKC method was completely different from that of MEKC.     

Separation Study of Eight Isoflavones by MEKC with Different Surfactants

Isoflavones are a very important group of natural products. This study investigated the separation of eight isoflavones, namely ononin, daidzin, genistin, biochanin A, formononetin, puerarin, genistein, and daidzein, from pueraria by micellar electrokinetic chromatography (MEKC) with different surfactants. The following micellar systems of MEKC were systematically compared for the analysis of these isoflavones: (1) a single surfactant comprising the anionic surfactant sodium dodecyl sulfate (SDS), the cationic surfactant hexadecyltrimethylammonium bromide, the neutral surfactant polyoxyethylene sorbitan monolaurate (Tween 20), and the ionic liquid-type surfactant (also a cationic surfactant) 1-dodecyl-3-methylimidazolium tetrafluoroborate (C₁₂MIMBF₄); (2) different single surfactants with 1-butyl-3-methylimidazolium tetrafluoroborate (BMImBF₄) as an additive (modifier); and (3) mixed micelles of SDS + Tween 20 and C₁₂MIMBF₄ + Tween 20. Both SDS with BMImBF₄ as additive and mixed micelles of SDS + Tween 20 had the highest separation efficiency for the eight investigated compounds. Furthermore, the SDS with BMImBF₄ as additive was more stable (good repeatability of retention time and peak shape of analytes) than mixed micelles of SDS + Tween 20, which may be the result of a stabilizing effect of BMImBF₄. Therefore, the final analytical conditions were 15 mM SDS added with 50 mM BMImBF₄ in 30 mM sodium tetraborate (STB, pH 9.5) as running buffer; applied voltage, 20 kV; injection, 50 mbar for 5 s; cartridge temperature, 25 °C; compounds were detected at 260 nm. The developed method was fully validated (limit of detection, limit of quantification, intraday precision, inter-day precision, and recovery) and successfully applied to determine the eight analytes in three Radix Puerariae samples. The present study indicated that SDS with ionic liquids as additive in MEKC was suitable for the analysis of isoflavones.

     

Separation of alkamides from Echinacea purpurea extracts by cyclodextrin-modified micellar electrokinetic chromatography

Separation of nine important alkyl methylbutyl- and isobutylamides (known as alkamides) obtained from Echinacea purpurea extracts was investigated by using cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC). Hydrophobic alkamides interact strongly with the micelles from the most common surfactants used in MEKC and this lead to predominant partition of the analytes into the micellar phase, resulting in poor resolution. The addition of neutral CDs to the alkaline (10 mM phosphate buffer pH 8.0) micellar system of sodium dodecyl sulfate (SDS), sodium cholate (SC) and sodium deoxycholate (SDC) was found to improve the separation of the studied alkamides. Among the several combinations surfactant/CD, three different systems showed to be particularly effective: SDS/hydroxypropyl-beta-CD (110 mM/100 mM) and SC/heptakis (2, 3, 6-tri-O-methyl)-beta-CD (200 mM/40 mM) which provided a complete separation of the studied compounds, and SDC/heptakis (2, 6-di-O-methyl)-beta-CD. The importance of appropriate surfactant vs. CD concentration ratio as well as that of total concentration of both surfactant and CD was considered. The optimization of the separation was performed by focussing the need for a rapid separation of nine alkamides diagnostically useful to define the fingerprint of Echinacea species.