Turbulent Drag Reduction Efficiency and Mechanical Degradation of Poly(Acrylamide)

Abstract

Turbulent drag reduction (DR) efficiency and mechanical degradation of high‐molecular‐weight poly(acrylamide) (PAAM) was investigated in a rotating disk apparatus. Drag reduction efficiency of PAAM was measured as a function of rotational speed, polymer concentration, and temperature and then compared with that of poly(ethylene oxide) (PEO). The PAAM exhibited relatively high shear resistance, and its mechanical degradation behavior in a turbulent flow was examined by using both an exponential and a fractional exponential decay equation.     

Modification of cycloolefin copolymer and poly(vinyl chloride) surfaces by superimposition of nano- and microstructures

Cycloolefin copolymer (COC) and poly(vinyl chloride) (PVC) surfaces were patterned with nanopillars or with microbumps on which nanopillars were superimposed. The area of patterned surfaces was several square centimeters. Patterning was achieved by applying nanoporous anodized aluminum oxide (AAO) membrane as a mask in injection molding or imprinting. Nanostructures superimposed on microstructures were achieved by patterning the AAO mask with microstructures before anodization. Micro- and nanometer-sized structures could then be transferred simultaneously to polymer surfaces. Structures were characterized by SEM, AFM, and contact profilometry. The effect of different-sized structures on properties of the polymer surface was studied by contact angle measurements. Relative to the smooth surface, the increase in water contact angle on a COC surface with nanostructures superimposed on microstructures was up to 50°.     

Adsorption and electrically stimulated desorption of the triblock copolymer poly(propylene sulfide-bl-ethylene glycol) (PPS-PEG) from indium tin oxide (ITO) surfaces

Protein-resistant triblock copolymers, poly(propylene sulfide-bl-ethylene glycol) (PPS-PEG) have been previously demonstrated to chemisorb onto gold surfaces forming monolayers that resist non-specific protein adsorption and are stable against oxidation. In this paper, we report on the adsorption of PPS-PEG onto a transparent and electrically conductive substrate, indium tin oxide (ITO). In addition, we demonstrate the controlled desorption of PPS-PEG by applying an electrical stimulus. We have used three complementary surface characterization techniques: variable angle spectroscopic ellipsometry (VASE), X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) to analyze the adsorption and electro-desorption of PPS-PEG from an ITO surface. All three methods confirmed the formation of PPS-PEG adlayers on the ITO surfaces. Based on our experimental XPS and ToF-SIMS results as well as former publications, we postulate that the chemisorption of the PPS-PEG on ITO involves direct sulfide-indium (or tin) interactions. When an ascending anodic electrical stimulus was applied to the surface of the modified samples, a gradual and steady polymer removal was observed, with complete loss of the polymeric monolayer at a potential of 2000 mV (referenced to Ag electrode). Anodic polarization did not result in oxidation of the thioether function of the PPS-PEG adlayers, indicating excellent oxidation resistance of PPS-PEG on ITO surfaces. This work is focused on exploiting electrical stimuli for the in situ surface modification under dynamic control.     

Crystallization of Poly(Ethylene Oxide) in Thin Films

Crystallization of poly(ethylene oxide) (PEO) in thin films was studied using hot-stage polarized optical microscopy. Isothermal linear crystal growth rates were measured for various film thicknesses at various degrees of undercooling. At a given crystallization temperature, the linear crystal growth rate decreased exponentially with decreasing film thickness below a film thickness of 80 nm. Films showed similar spherulitic morphology down to a film thickness of 30 nm. Control experiments on hydrophilic and hydrophobic surfaces showed that surface chemistry affects stability of the polymer films and causes a competition between crystallization and dewetting.     

An experimental study on the effect of mesoporous silica addition on ion conductivity of poly(ethylene oxide) electrolytes

Solid polymer electrolyte (SPE) composites, which are composed of poly(ethylene oxide) (PEO), mesoporous silica (SBA-15), and lithium salt were prepared in order to investigate the influence of SBA-15 content on the ionic conductivity of the composites. The ionic conductivity of the SPE composites was monitored by frequency response analyzer (FRA), and the crystallinity of the SPE composites was evaluated by using XRD. As a result, the addition of SBA-15 to the polymer mixture inhibited the growth of PEO crystalline domain, due to the mesoporous structure of the SBA-15. Also, the PEO₁₆LiClO₄/SBA-15 composite electrolytes show an increased ion conductivity as a function of SBA-15 content up to 15 wt.%. These ion conductivity characteristics are dependent on crystallinity with SBA-15 content.     

Utilization of ultrasonic irradiation as a green and effective strategy to prepare poly(N-vinyl-2-pyrrolidone)/modified nano-copper (II) oxide nanocomposites

The present paper describes the result of investigations into preparation of novel nanocomposites (NCs) based on poly(N-vinyl-2-pyrrolidone) (PVP) as a biocompatible polymer and modified copper (II) oxide nanoparticles (NPs) as a nano-filler. To achieve optimum NCs properties, different ratios of modified copper (II) oxide NPs (3, 5, and 7 wt%) were used to fabricate PVP NCs and also the ultrasonic irradiation was utilized to perform these processes as a fast and effective method. Subsequently, the structure of the obtained nanohybrids was characterized by various techniques. The suitable incorporation between PVP matrix and modified CuO NPs can be seen from the FT-IR spectra. The obtained NCs indicated an efficient thermal improvement in comparison to the pristine polymer. Also, the uniform dispersion of modified CuO NPs in the PVP matrix was detected by FE-SEM and EDX. According to UV absorption spectra, it is clear that these NCs can be used in UV protecting applications.     

Solid polymer electrolytes based on poly(lithium carboxylate) salts

The ionic conductivity, lithium ion transference number, electrochemical stability, and thermal property of solid polymer electrolytes composed of poly(ethylene oxide) (PEO) and poly(lithium carboxylate)s, (poly(lithium acrylate) (Poly(Li-A)) or poly(lithium fumarate) (Poly(Li-F)), with and without BF₃·OEt₂ were investigated. The ionic conductivities of all solid polymer electrolytes were enhanced by one to two orders of magnitude with addition of BF₃·OEt₂ because the dissociation of lithium ion and carboxylate anion was promoted by the complexation with BF₃. The lithium ion transference number in the solid polymer electrolytes based on poly(lithium carboxylate)s showed relatively high values of 0.41–0.70, due to the suppression of the transport of counter anion by the use of a polymeric anion. The solid polymer electrolytes with addition of BF₃·OEt₂ showed good electrochemical stability.     

Computational investigation into the mechanisms of UV ablation of poly(methyl methacrylate)

Molecular dynamics simulations with an embedded Monte Carlo based reaction scheme were used to study UV ablation of poly(methyl methacrylate) (PMMA) at 157 nm. We discuss the onset of ablation, the formation and distribution of products in the plume and stress relaxation of the polymer matrix. Laser induced heating and bond-breaks are considered as ablation pathways. We show here that depending on the nature of energy deposition the evolution of ablation plume and yield composition can be quite different. If all of photon energy is converted to heat it can set off ablation via mechanical failure of the material in the heated region. Alternatively, if the photon energy goes towards breaking bonds first, it initiates chemical reactions, polymer unzipping and formation of gaseous products inside the substrate. The ejection of these molecules has a hollowing out effect on the substrate which can lead to ejection of larger chunks. No excessive pressure buildup due to creation of gaseous molecules or entrainment of larger polymer chunks is observed in this case.     

Growth behavior and field-induced diffusion of Ni clusters/particles on SrTiO3 (001) observed by UHV-TEM/STM

The fundamental and technological importance of metal clusters and particles on oxide surfaces is growing. Here, room temperature deposited Ni clusters and particles on clean SrTiO₃ (001) surfaces were analyzed with a UHV-TEM/STM combined system to investigate reaction, growth, morphology, and crystal structure consistently. STM observation revealed their growth process from isolated clusters almost of the size of the nuclei to bigger particles. From TEM observation, it was found that small clusters have a semi-commensurate epitaxial orientation relationship, but that bigger ones grow into an incommensurate cube-on-cube epitaxial orientation relationship. STS measurement on Ni particles caused field-induced diffusion of Ni atoms, in which piling up of Ni was recognized at the positions of the STM tips. This is assumed to be related with interfacial reaction.     

Influence of Blend Composition on Crystallization of Poly(L-Lactic Acid)/Poly (Ethylene Oxide) Crystalline/Crystalline Blends

The effect of blend composition on crystallization morphology and behavior of a crystalline/crystalline blend, poly(l-lactic acid) (PLLA)/poly(ethylene oxide) (PEO), during slow, non-isothermal crystallization was studied by polarized light microscopy (PLM) connected with a hot-stage and differential scanning calorimetry (DSC). The results showed that all of the PLLA/PEO blends produced spherulites which gradually became bigger and looser, as well as coarser, with the increment of the PEO content, indicating that the PEO crystals was resided in the interlamellar or interfibrillar (between clusters of commonly oriented lamellae) regions of the PLLA spherulites. In the (25/75) and (10/90) blends, the nucleation and growth processes of the PEO spherulites could be clearly observed in the pre-existing PLLA spherulites. The onset crystallization temperature and the melting point of one component decreased with increasing the content of the other one owing to the good miscibility of the two components in the non-crystalline state and the interaction between their macromolecules, indicating that the crystallization of each component was influenced by the other one.     

Microphase separation in a cross-linked epoxy phenol polymer

The microphase separation on the surface of samples of a cross-liked epoxy phenol (EP) polymer produced by the curing of a composition containing an epoxy diane oligomer (EO) and a phenol formaldehyde oligomer (PO) has been investigated using electron microscopy with decoration by silver chloride. It has been shown that, in the cross-liked EP polymer, there is a quasi-lattice of mixed-type AgCl nanoparticles, which consists of two sublattices. The formation of simple lattices of particles is caused by the microphase separation according to the type of nucleation and growth of fractal clusters of the cross-liked EO; the spinodal decomposition in the binary system; and the formation of interpenetrating polymer networks represented by the superposition of two lattices of particles or two infinite phase clusters (cross-liked EO and PO, respectively).     

Structural Recovery of High-Aspect-Ratio Nanoparticle/Polymer Nanocomposites in Simple Shear Flow

Structure formation, break-down, orientation, and recovery in a multiwalled carbon nanotube (MWCNT)-polyethylene oxide nanocomposite above the percolation threshold were investigated using oscillatory and rotational rheometric studies. It was found that above the percolation threshold a percolating cluster is formed in the mixture, which is broken down upon application of a shearing force greater than a critical value. The critical value depends on both temperature and concentration of MWCNT particles in the polymer matrix. No full recovery of the structure was observed, even after 3600 s of rest time. This was attributed to a very high tendency of the MWCNT particles to reaggregate and the high strength of the primary percolating cluster formed during the recovery process. A generalized mechanism was proposed for the breakdown and recovery of the clusters of the MWCNT particles which can explain the observations for different kinds of matrices and dispersed particles.     

Upon a magnetic composite preparation based on magnetite and poly(succinimide)-b-poly(ethylene glycol) shell

Taking into account that magnetic particles with suitable surface characteristics have a high potential for the use in a lot of in vitro and in vivo applications, in the study is presented the in situ preparation of a core-shell magnetic composite based on the magnetite core and the shell composed from the poly(succinimide)-b-poly(ethylene glycol) copolymer. The average particle size of the synthesized magnetic microspheres is in the range of 6.5-8.8 μm with a magnetite content of around 11%. The saturation magnetization of the microspheres was found 26.8 emu/g, the magnetic microspheres being characterized by superparamagnetic properties. The particles have combined properties of high magnetic saturation and biocompatibility and interactive functions at the surface through the block copolymer shell. The surface of the magnetic particles has also the possibility for further functionalization or the attachment of various bioactive molecules after the hydrolysis of the succinimide cycle and the resulting carboxylic group.     

Preparation and characterization of a lithium ion conducting electrolyte based on poly(trimethylene carbonate)

In this paper, the results of preliminary studies of two new solvent-free polymer electrolytes based on poly(trimethylene carbonate), p(TMC), with lithium trifluoromethanesulphonate, (triflate), and lithium perchlorate are described. Thin films of these electrolytes were obtained by evaporation of solvent from homogeneous mixtures of known masses of host polymer and salt. Electrolytes with compositions of n between 1.5 and 85, where n represents the molar ratio of (O=COCH₂CH₂CH₂O) units per lithium ion, have been prepared. These solvent-free electrolytes were characterized by measurements of total ionic conductivity, differential scanning calorimetry (DSC) and thermogravimetry (TGA). As expected from previous studies with these salts in poly(ethylene oxide), PEO, the triflate-based system showed superior thermal stability but with a lower total ionic conductivity than that of the perchlorate-containing electrolyte. The highest conductivity (approximately 3×10⁻⁴ Ω⁻¹ cm⁻¹) was found at 95°C with the electrolyte composition of (TMC)₂LiClO₄.     

Vibrational and impedance spectroscopic analysis of poly(vinyl alcohol)-based solid polymer electrolytes

Solid polymer electrolytes based on poly(vinyl alcohol) (PVA) doped with NH₄Br have been prepared by the solution-casting method. The complex formation between the polymer and the salt has been confirmed by Fourier transform infrared spectroscopy. The highest conductivity at 303 K has been found to be of the order of 10⁻⁴ Scm⁻¹ for 25 mol% NH₄Br-doped PVA system. The ionic transference number of polymer electrolyte has been estimated by Wagner’s polarization method, and the results reveal that the conducting species are predominantly ions. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Epitaxial growth of cobalt clusters on the bare and the oxide film grown on NiAl(1 0 0) surfaces

The structure of the nano-sized cobalt clusters on bare NiAl(1 0 0) and an oxidized NiAl(1 0 0) surfaces have been investigated by AES, LEED and RHEED. The deposition of Co onto bare NiAl(1 0 0) at room temperature led to small crystalline Co grains and surface asperities of substrate. The latter is likely induced by replacement of surface Al, Ni atoms by Co deposit. At 800 K Co particles aggregate to form clusters, but incorporation of Co into bulk NiAl(1 0 0) could occur upon annealing at 900 K. On the other hand, pure face-centered cubic (fcc) phase of Co crystallites of ≈1 nm in diameter with inclusion of smaller-sized particles (D < 1 nm) are observed on Θ-Al₂O₃ after Co deposition at room temperature. After annealing the Co nano-clusters grow larger at expense of small particles (D ≈ 3 nm), where the [1 1 0] and [−1 1 0] axis of the Co(0 0 1) facets are parallel to the [1 0 0] and [0 1 0] directions of (0 0 1)oxide, respectively. The in-plane lattice constant of Co clusters is ca. 4% larger than that of bulk Co, yielding less strain at the Co/oxide interface. A 15° ± 10% random orientation of the normal to (0 0 1) facet of Co clusters with respect to (0 0 1)oxide surface was deduced from the “arc”-shape reflection spots in RHEED. These results suggest that both orientation and phase of Co clusters are strongly affected by the nature and structure of oxide surface.     

Polyelectrolyte Complexes of Homo- and Copolymers of Vinyl Ether of Monoethanolamine with Poly(Acrylic Acid) in Aqueous Solutions

The complexation of homo- and copolymers of vinyl ether of monoethanolamine with poly(acrylic acid) has been studied in aqueous solutions. The effect of pH on the complexation has been shown. In acidic media (pH 2.4), the polyelectrolyte complex is enriched by anionic polymer units. In weakly acidic media (pH 4–6), the formation of stoichiometric polyelectrolyte complex is observed. In higher pH media (pH 6–8), the polycomplex contains an excessive amount of cationic polymer. The stability of the polyelectrolyte complexes is affected by the addition of inorganic salts and dimethylformamide.     

Photoluminescence properties of the composite of porous alumina and poly (2,5-dibutoxy-1,4 phenylenevinylene)

The spin coating method was used to assemble polymer (Poly (2,5-dibutoxy-1,4-phenylenevinylene)) (DBO-PPV) into the pores of porous alumina which was prepared by anodization. Four peaks in the photoluminescence (PL) spectra of the composite, with contributions from the DBO-PPV and porous alumina, were found. It was also found that the light emitting from the porous alumina could excite the photoluminescence of DBO-PPV. The nanometer effect of the porous alumina can lead to a blue shift of 90 nm of the PL peaks of DBO-PPV.     

POLY(3-HYDROXYBUTYRATE)-BASED COPOLYMERS AND BLENDS: INFLUENCE OF A SECOND COMPONENT ON CRYSTALLIZATION AND THERMAL BEHAVIOR*

Isotactic poly(3-hydroxybutyrate) (P3HB) is an aliphatic polyester obtained by bacterial fermentation. This truly biodegradable polymer has been widely investigated, mainly with the aim to replace conventional plastics, which cause environmental pollution. To improve its properties, extensive studies have been conducted to modify it properly by copolymerization or blending with other polymers. Macroscopic properties of polymers, particularly of polymer blends, are strongly affected by their microstructure, especially by the allocation of different phases and their level of dispersion and adhesion. In nonreactive blends, the adhesion level is mainly determined by the similarity between the chemical structure of the components, and the arrangement of the phases is remarkably controlled by the crystallization conditions. The superstructure of the crystalline phases accounts for the mechanical resistance of the blend, but the composition and the distribution of the amorphous phases also play an important role, especially with respect to toughness properties. This article reviews data on thermal properties and the crystallization process of P3HB and its copolymers, both alone and in the presence of other polymers. In particular, copolymers of 3-hydroxybutyrate with 3-hydroxyvalerate and with 4-hydroxybutyrate and blends of P3HB and the copolymers with atactic poly(3-hydroxybutyrate), poly(vinyl acetate), poly(vinyl alcohol), poly(ethylene oxide), poly(methylene oxide), poly(epichlorohydrin), and poly(methyl methacrylate) are considered. Major attention is directed toward the influence of miscibility and composition on solidification kinetics and crystal structure with the objective to provide an overview of the current state of the art.

     

Platinum particles dispersed poly(diphenylamine) modified electrode for methanol oxidation

A modified potentiostatic method, termed the ‘pulse pontentiostatic method’ (PPSM) was used to get nano fibrillar poly(diphenylamine) (PDPA) film on Indium tin oxide (ITO) coated glass electrode and also for making modified electrode with platinum particles dispersed in PDPA. Platinum clusters were electrodispersed under constant potential on PDPA films to obtain catalytic electrodes for methanol oxidation. Energy dispersive analysis of X-rays (EDAX) results showed that the Pt microparticles are deposited into PDPA film. Scanning electron micrograph, SEM images show that the deposition results spherical catalytic particles. X-ray photoelectron spectroscopy (XPS) results inform that the net electronic charge on carbon atom and also the imine/amine ratio was not affected by Pt loadings. The modification of electrode surface by nano fibular PDPA improves the electrocatalytic activity for methanol oxidation.