Critical behavior of self-assembled rigid rods on triangular and honeycomb lattices

Using Monte Carlo simulations and finite-size scaling analysis, the critical behavior of self-assembled rigid rods on triangular and honeycomb lattices at intermediate density has been studied. The system is composed of monomers with two attractive (sticky) poles that, by decreasing temperature or increasing density, polymerize reversibly into chains with three allowed directions and, at the same time, undergo a continuous isotropic-nematic (IN) transition. The determination of the critical exponents, along with the behavior of Binder cumulants, indicate that the IN transition belongs to the q=1 Potts universality class.     

Isotropic-nematic phase transition in the Lebwohl-Lasher model from density of states simulations

Density of states Monte Carlo simulations have been performed to study the isotropic-nematic (IN) transition of the Lebwohl-Lasher model for liquid crystals. The IN transition temperature was calculated as a function of system size using expanded ensemble density of states simulations with histogram reweighting. The IN temperature for infinite system size was obtained by extrapolation of three independent measures. A subsequent analysis of the kinetics in the model showed that the transition occurs via spinodal decomposition through aggregation of clusters of liquid crystal molecules.     

Entropic wetting and the free isotropic-nematic interface of hard colloidal platelets

We study bulk and interfacial properties of a model suspension of hard colloidal platelets with continuous orientations and vanishing thickness using both density functional theory, based on either a second virial approach or fundamental measure theory (FMT), and Monte Carlo (MC) simulations. We calculate the bulk equation of state, bulk isotropic-nematic (IN) coexistence, and properties of the (planar) free IN interface and of adsorption at a planar hard wall, where we find complete wetting of the nematic phase at the isotropic-wall interface upon approaching bulk IN coexistence. We investigate in detail the asymptotic decay of correlations at large distances. In all cases, the results from FMT and MC agree quantitatively. Our findings are of direct relevance to understanding interfacial properties of dispersions of colloidal platelets.     

Phase behavior of semiflexible polymer chains

Monte Carlo simulations were performed on semiflexible polymer chains with the goal of delineating their isotropic-nematic (IN) and gas-liquid coexistence envelopes. The chain monomers are spherical beads that interact via a square-well potential with all other beads. Bonded beads are connected by strings chosen so that bond length varies between 1.01sigma and 1.05sigma (where sigma is the hard sphere diameter). The stiffness of the molecules is controlled via a potential between beads separated by two bonds; this potential restricts the distance between these beads to be between 2.02sigma and 2.1sigma. The vapor-liquid coexistence and IN coexistence curves are obtained using computer simulations. An IN transition is found for 10相似文献   

Negative thermal expansion of water in hydrophobic nanospaces

The density and intermolecular structure of water in carbon micropores (w = 1.36 nm) are investigated by small-angle X-ray scattering (SAXS) and X-ray diffraction (XRD) measurements between 20 K and 298 K. The SAXS results suggest that the density of the water in the micropores increased with increasing temperature over a wide temperature range (20-277 K). The density changed by 10%, which is comparable to the density change of 7% between bulk ice (I(c)) at 20 K and water at 277 K. The results of XRD at low temperatures (less than 200 K) show that the water forms the cubic ice (I(c)) structure, although its peak shape and radial distribution functions changed continuously to those of a liquid-like structure with increasing temperature. The SAXS and XRD results both showed that the water in the hydrophobic nanospaces had no phase transition point. The continuous structural change from ice I(c) to liquid with increasing temperature suggests that water shows negative thermal expansion over a wide temperature range in hydrophobic nanospaces. The combination of XRD and SAXS measurements makes it possible to describe confined systems in nanospaces with intermolecular structure and density of adsorbed molecular assemblies.     

MoO3-SnO2催化剂上二甲醚低温氧化高选择性制备甲酸甲酯

定向设计并制备了多功能MoO₃-SnO₂催化剂,在常压连续流动固定床反应器上实现了二甲醚低温氧化高选择性制备甲酸甲酯的过程。考察了机械混合法、共沉淀法及沉淀浸渍法等不同制备方法对催化剂性能的影响。在沉淀浸渍法制备的MoO₃-SnO₂催化剂上,常压、160℃反应条件下,甲酸甲酯选择性达94.1%,DME转化率也达到了33.9%,并且产物中无CO_x生成。采用NH₃-TPD、CO₂-TPD及H₂-TPR对催化剂进行了表征,结果表明,表面酸性、碱性及氧化性的不同是造成催化剂反应性能差异的原因。另外,通过采用XRD、Raman及TEM对催化剂结构进行表征发现,晶粒粒径及金属氧化物MoO₃的存在状态等结构的差异是造成催化剂活性不同的主要原因。较小晶粒的催化剂和表面存在的低聚态MoO₃是致使催化剂活性提高的主要原因。     

铜基催化剂催化合成气一步合成甲醇和甲酸甲酯 I.温度和压力的影响(英文)

考察了在低温、低压和浆态反应条件下,由合成气一步直接合成甲醇和甲酸甲酯（ＭＦ）的反应和催化剂。结果表明,不同方法制各的Ｃｕ基催化剂具有不同的催化活性和甲酸甲酯选择性。采用络合沉淀法（ＣＰ）制备的催化剂具有较高的催化活性和ＭＦ选择性。温度和压力对催化剂的活性和ＭＦ选择性具有明显的影响。Ｃｕ－Ｃｒ催化剂的活性随温度和压力的增加而增加,其选择性随温度的升高而降低,随压力的升高而增加。     

Application of Fokker-Planck-Kramers equation treatment for short-time dynamics of diffusion-controlled reaction in supercritical Lennard-Jones fluids over a wide density range

The validity of a Fokker-Planck-Kramers equation (FPKE) treatment of the rate of diffusion-controlled reaction at short times [K. Ibuki and M. Ueno, J. Chem. Phys. 119, 7054 (2003)] is tested in a supercritical Lennard-Jones fluid over a wide density range by comparing it with the Langevin dynamics and molecular dynamics simulations and other theories. The density n range studied is 0.323n(c)< or =n< or =2.58n(c) and the temperature 1.52T(c), where n(c) and T(c) are the critical density and temperature, respectively. For the rate of bimolecular reactions, the transition between the collision-limited and diffusion-limited regimes is expected to take place in this density range. The simulations show that the rate constant decays with time extensively at high densities, and that the magnitude of decay decreases gradually with decreasing density. The decay profiles of the rate constants obtained by the simulations are reproduced reasonably well by the FPKE treatment in the whole density range studied if a continuous velocity distribution is used in solving the FPKE approximately. If a discontinuous velocity distribution is used instead of the continuous one, the FPKE treatment leads to a rate constant much larger than the simulation results at medium and low densities. The rate constants calculated from the Smoluchowski-Collins-Kimball (SCK) theory based on the diffusion equation are somewhat smaller than the simulation results in medium and low densities when the intrinsic rate constant is chosen to adjust the steady state rate constant in the low density limit to that derived by the kinetic collision theory. The discrepancy is relatively small, so that the SCK theory provides a useful guideline for a qualitative discussion of the density effect on the rate constant.     

Increased electroactive species concentration in anodic biofilm of <Emphasis Type="Italic">Geobacter</Emphasis>-inoculated microbial fuel cells under static magnetic field

The effects of a static magnetic field (MF) on the electricity production and anodic bioelectrochemical activity in Geobacter sulfurreducens-inoculated microbial fuel cells (MFCs) were investigated. The results showed that application of a MF of 100, 200, and 400 mT improved the electricity generation considerably, with an increase in the maximum power density by 27–100 %. The maximum power density of 0.030 mW cm^?2 was obtained at field strength of 100 mT, representing the best MFC performance with the lowest internal resistance of 453.6 Ω. Electrochemical impedance spectroscopy results showed that the MFC activation resistance was decreased under a MF. The impact of a MF on the bioelectrochemical activity of Geobacter-based biofilm was analyzed by cyclic voltammetry (CV). The redox peak currents of the voltammetric behavior increased in the presence of a MF, indicating enhanced bioelectrochemical catalyzed activity. In addition, evidence from CV revealed higher density of electroactive species in the anodic biofilm with MF than without, leading to a more efficient direct electron transfer process by G. sulfurreducens.     

合成气低温液相催化制甲醇和甲酸甲酯铜基催化剂体系研究 Ⅰ.氯化亚铜催化剂体系中各种因素的影响

合成气低温液相催化制甲醇和甲酸甲酯铜基催化剂体系研究 Ⅰ.氯化亚铜催化剂体系中各种因素的影响     

聚(N-异丙基丙烯酰胺)水凝胶微球体积相变的研究

窄分散的聚（Ｎ 异丙基丙烯酰胺）水凝胶微球用乳液聚合方法制备，并用动态和静态光散射对其体积相变进行了研究．与水中聚（Ｎ 异丙基丙烯酰胺）线性单链比较，水中凝胶微球的体积相变温度较高，对温度的响应比较平缓．相变是连续的，有别于大块凝胶非连续的体积变化．在体积相变过程中，凝胶微球始终是密度均一的热力学稳定球体．从相变过程网络密度的变化可以确定，绝大部分的水在收缩过程被排了出来，但在紧缩的凝胶微球中仍含有约７０％的水．     

High-performance supercapacitor based on ultralight and elastic three-dimensional carbon foam/reduced graphene/polyaniline nanocomposites

A novel supercapacitor based on ultralight and elastic three-dimensional porous melamine foam-derived macroporous carbon/reduced graphene oxide/polyaniline nanocomposites were fabricated, which showed great electrical performance and cycle performance.     

Exact solution of a RNA-like polymer model on the Husimi lattice

We investigate a two-tolerant polymer model on the square Husimi lattice, which aims at describing the properties of RNA-like macromolecules. We solve the model in a numerically exact way, working out the grand-canonical phase diagram, both with and without taking into account the stacking effect. Besides a nonpolymerized phase, we observe two different polymerized phases characterized by a lower or higher density of doubly visited lattice bonds. The system exhibits three qualitatively different regimes, as a function of the monomer chemical potential. Below some T1 temperature and above some T2 temperature, the transition to the nonpolymerized phase is continuous, whereas, in the (T1,T2) temperature range, the transition is first order. In the dilute-solution limit, the high temperature regime corresponds to a swollen ("coil") state, the intermediate regime to a moderately collapsed ("molten") state, with a small fraction of paired segments, and the low temperature regime to an almost fully paired ("native") state. The molten state ends in a tricritical (Theta-like) transition at high temperature and in a critical end point at low temperature. Upon increasing the stacking energy parameter, the temperature range of the molten state turns out to be progressively reduced but never completely removed.     

A structural mode-coupling approach to 15N NMR relaxation in proteins.

The two-body Slowly Relaxing Local Structure (SRLS) model was applied to (15)N NMR spin relaxation in proteins and compared with the commonly used original and extended model-free (MF) approaches. In MF, the dynamic modes are assumed to be decoupled, local ordering at the N-H sites is represented by generalized order parameters, and internal motions are described by effective correlation times. SRLS accounts for dynamical coupling between the global diffusion of the protein and the internal motion of the N-H bond vector. The local ordering associated with the coupling potential and the internal N-H diffusion are tensors with orientations that may be tilted relative to the global diffusion and magnetic frames. SRLS generates spectral density functions that differ from the MF formulas. The MF spectral densities can be regarded as limiting cases of the SRLS spectral density. SRLS-based model-fitting and model-selection schemes similar to the currently used MF-based ones were devised, and a correspondence between analogous SRLS and model-free parameters was established. It was found that experimental NMR data are sensitive to the presence of mixed modes. Our results showed that MF can significantly overestimate order parameters and underestimate local motion correlation times in proteins. The extent of these digressions in the derived microdynamic parameters is estimated in the various parameter ranges, and correlated with the time scale separation between local and global motions. The SRLS-based analysis was tested extensively on (15)N relaxation data from several isotropically tumbling proteins. The results of SRLS-based fitting are illustrated with RNase H from E. coli, a protein extensively studied previously with MF.     

Thermal stability and viscoelastic properties of MF/PVAc hybrid resins on the adhesion for engineered flooring in under heating system; ONDOL

The thermal properties of blends of melamine-formaldehyde (MF) resin and poly(vinyl acetate) (PVAc) for engineered flooring used on the Korean traditional ONDOL house floor heating system were investigated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). The viscoelastic properties of the blends were also studied. Because MF resin is a thermosetting adhesive, the effect of MF rein was shown across all thermal behaviors. The addition of PVAc reduced the curing temperature. The TGA results showed that the DTG_max temperature and thermal stability of the blends increased with increasing PVAc content. The blends were examined in non-isothermal DSC experiments at a heating rate of 10 °C/min. There was an exothermic peak in all the heating scanning curves, with each blend displaying a single curing peak temperature (T_p), intermediate between those of the two pure components and varying with the blend composition. The DMTA thermogram of MF resin showed that the storage modulus (E′) increased as the temperature was further increased as a result of the cross-linking induced by the curing reaction of the resin. E′ of MF resin increased both as a function of increasing temperature and with increasing heating rate.     

Structure-property relationships in the crystals of the smallest amino acid: an incoherent inelastic neutron scattering study of the glycine polymorphs

Incoherent inelastic neutron scattering spectra for the three crystalline polymorphs (alpha- P2(1)/n, beta- P2(1), gamma- P3(1)) of glycine (C2H5NO2) at temperatures between 5 and 300 K (using the time-of-flight (ToF) spectrometer NEAT at HMI) and at pressures from ambient up to 1 GPa (using the ToF spectrometer IN6 at the ILL) were measured. Significant differences in the band positions and their relative intensities in the density of states (DoS) were observed for the three polymorphs, which can be related to the different intermolecular interactions. The mean-squared displacement, (T), dependence reveals a change in dynamic properties at about the same temperature (150 K) for all the three forms, which can be related to the reorientation of the NH3 group. Besides, a dynamic transition in beta-glycine at about 230-250 K on cooling was also observed, supporting previously obtained adiabatic calorimetry data. This behavior is similar to that already observed in amorphous solids, on approaching the glass transition temperatures, as well as in biological systems. It suggests the onset of degrees of freedom most likely related to transitions between slightly different conformational orientations. The DoS obtained as a function of pressure has confirmed the stability of the alpha-form with respect to pressure and also depicted a sign of the previously reported reversible beta-beta' glycine phase transition in between 0.6 and 0.8 GPa. Moreover, a remarkable kinetic effect in the pressure-induced phase transition in gamma-glycine was revealed. After the sample was kept at 0.8 GPa for an hour in the neutron beam, an irreversible transition into a high-pressure form (different from the beta'-form) occurred, although previously in X-Ray diffraction and Raman spectroscopy experiments a gamma- to delta-glycine phase transition was observed above 3.5 GPa only.     

Surface-induced phase behavior of polymer/nanoparticle blends with attractions

In an athermal blend of nanoparticles and homopolymer near a hard wall, there is a first order phase transition in which the nanoparticles segregate to the wall and form a densely packed monolayer above a certain nanoparticle density. Previous investigations of this phase transition employed a fluids density functional theory (DFT) at constant packing fraction. Here we report further DFT calculations to probe the robustness of this phase transition. We find that the phase transition also occurs in athermal systems at constant pressure, the more natural experimental condition than constant packing fraction. Adding nanoparticle-polymer attractions increases the nanoparticle transition density, while sufficiently strong attractions suppress the first-order transition entirely. In this case the systems display a continuous transition to a bulk layered state. Adding attractions between the polymers and the wall has a similar effect of delaying and then suppressing the first-order nanoparticle segregation transition, but does not lead to any continuous phase transitions.     

Swelling and deswelling kinetics of poly(N-isopropylacrylamide) gels

Swelling and deswelling kinetics was investigated for three types of cylindrical poly(N-isopropylacrylamide) (PNIPA) gels differing in crosslink density. The temperature dependence curves of the volume of the gel specimens were different from one another. One of the gel specimens was considered as a critical gel showing the continuous volume phase transition. The volume change process of the specimens after a temperature jump was examined. In the deswelling processes with temperature jumps to temperatures higher than 35 degrees C, a phase separation was observed in the gel specimens and the volume change slowed down due to the homogenization after the phase separation. The value of the diffusion constant obtained without the phase separation decreased rapidly as temperature approaches the transition temperature. The rapid decrease for the critical gel indicates the emergence of the critical slowing-down. The value of the critical exponent for the correlation length suggests that the universality class for the volume phase transition of the critical PNIPA gel belongs to the class for the classical theory.     

Melting and mechanical properties of polymer grafted lipid bilayer membranes

The influence of polymer grafting on the phase behavior and elastic properties of two tail lipid bilayers have been investigated using dissipative particle dynamics simulations. For the range of polymer lengths studied, the L(c) to L(α) transition temperature is not significantly affected for grafting fractions, G(f) between 0.16 and 0.25. A decrease in the transition temperature is observed at a relatively high grafting fraction, G(f) = 0.36. At low temperatures, a small increase in the area per head group, a(h), at high G(f) leads to an increase in the chain tilt, inducing order in the bilayer and the solvent. The onset of the phase transition occurs with the nucleation of small patches of thinned membrane which grow and form continuous domains as the temperature increases. This region is the co-existence region between the L(β)(thick) and the L(α)(thin) phases. The simulation results for the membrane area expansion as a function of the grafting density conform extremely well to the scalings predicted by self-consistent mean field theories. We find that the bending modulus shows a small decrease for short polymers (number of beads, N(p) = 10) and low G(f), where the influence of polymer is reduced when compared to the effect of the increased a(h). For longer polymers (N(p) > 15), the bending modulus increases monotonically with increase in grafted polymer. Using the results from mean field theory, we partition the contributions to the bending modulus from the membrane and the polymer and show that the dominant contribution to the increased bending modulus arises from the grafted polymer.     

Study of crystallinity and thermomechanical analysis of annealed poly(ethylene terephthalate) films

The objective of this article was the determination of the degree of crystallinity of a series of heat-set poly(ethylene terephthalate) (PET) films and their study by thermomechanical analysis (TMA) in order to elucidate a peculiar behaviour that takes place around the glass transition region. For this purpose, amorphous cast Mylar films from DuPont were annealed at 115 °C for various periods of time. Four methods were used to study the crystallinity of the samples prepared: differential scanning calorimetry (DSC), density measurements (DM), wide-angle X-ray diffraction (WAXD), and Fourier transform infrared spectroscopy (FT-IR). From the results obtained, the following conclusions are drawn: amorphous PET Mylar films can be crystallized in a degree of about up to 30% after thermal treatment for 30 min (cold crystallization) above glass transition temperature. When these semicrystalline samples are subjected to TMA, they show a two step penetration of the probe into them, which decreases with the increase of the degree of crystallinity. The first step of penetration was attributed to the shrinkage of the amorphous or semicrystalline sample, which takes place on the glass transition temperature, while the second step was attributed to the continuous softening of the sample, and the reorganization of the matter which takes place on heating run due to cold crystallization.