GRAFTING OF POLYSTYRENE ONTO A NANOMETER SILICA SURFACE BY MICROEMULSION POLYMERIZATION

The grafting of polystyrene onto a nanometer silica surface by microemulsion polymerization is described. Silicawas functionalized with 3-methacryloxypropyltrimethoxysilane coupling agent before polymerization. A mixture of ionic andnon-ionic surfactants as well as water-soluble and oil-soluble initiators were used. The effect of the amount of silica and ionicsurfactant on the graft polymerization was studied. The graft polymerization procedure for styrene was also applied to methylmethacrylate. Composite particles with a core-shell structure were obtained and the yield and grafting efficiency of monomerwere high.     

Preparation of polystyrene/silica nanocomposites by radical copolymerization of styrene with silica macromonomer

A two-stage process has been developed to generate the silica-based macromonomer through surface-modification of silica with polymerizable vinyl groups. The silica surfaces were treated with excess 2,4-toluene diisocynate (TDI), after which the residual isocyanate groups were converted into polymerizable vinyl groups by reaction with hydroxypropylacrylate (HPA). Thus, polystyrene/silica nanocomposites were prepared by conventional radical copolymerization of styrene with silica macromonomer. The main effecting factors, such as ratios of styrene to the macromonomer, together with polymerization time on the copolymerization were studied in detail. FTIR, DSC and TGA were utilized to characterize the nanocomposites. Experimental results revealed that the silica nanoparticles act as cross-linking points in the polystytene/silica nanocomposites, and the glass transition temperatures of the nanocomposites are higher than that of the corresponding pure polystyrene. The glass transition temperatures of nanocomposites increased with the increasing of silica contents, which were further ascertained by DSC.     

SYNTHESIS AND CHARACTERIZATION OF STRUCTURALLY WELL-DEFINED POLYMER-INORGANIC HYBRID NANOPARTICLES VIA ATRP*

Atom transfer radical polymerization (ATRP) using cuprous chloride/2,2'-bipyridine (bipy) was applied to graftpolymerization of styrene on the surface of silica nanoparticles to synthesize polymer-inorganic hybrid nanoparticles. 2-(4-Chloromethylphenyl) ethyltriethoxysilane (CTES) was immobilized on the surface of silica nanoparticles throughcondensation reaction of the silanol groups on silica with triethoxysilane group of CTES. Then ATRP of St was initiated bythis surface-modified silica nanoparticles bearing benzyl chloride groups, and formed PSt graft chains on the surface of silicananoparticles. The thickness of the graft chains increased with reaction time. End group analysis confirmed the occurrence ofATRP. Thermal analysis indicated that thermal stabilization of these resulting hybrid nanoparticles also increases withpolymerization conversion. The results above show that this "grafting from" reaction could be used for the preparation ofpolymer-inorganic hybrid nanoparticles with controlled structure of the polymer's end groups.     

Preparation of well-defined polystyrene/silica hybrid nanoparticles by ATRP

Immobilization of the atom transfer radical polymerization (ATRP) macroinitiators at the silica nanoparticle surfaces was achieved through surface modification with excess toluene-2,4-diisocynate (TDI), after which the residual isocyanate groups were converted into ATRP macroinitiators. Structurally well-defined polystyrene chains were grown from the nanoparticle surfaces to yield individual particles composed of a silica core and a well-defined, densely grafted outer polystyrene by ATRP, which was initiated by the as-synthesized silica-based macroinitiator. FTIR, NMR and gel permeation chro-matography (GPC) were used to characterize the polystyrene/silica hybrid particles.     

A NOVEL METHOD TO PREPARE CROSSLINKED POLYETHYLENEIMINE HOLLOW NANOSPHERES

A novel method to prepare crosslinked polyethyleneimine(CPEI)hollow nanospheres was reported.Uniform silica nanospheres were used as templates,3-aminopropyl trimethoxysilane(APS)was immobilized on the surface of silica nanospheres as couple agent.Aziridine was initiated ring-opening polymerization with the amino groups in APS to form polyethyleneimine(PEI)shell layer.1,4-Butanediol diacrylate was utilized to crosslink PEI polymeric shell.The silica nanospheres in core were etched by hydrofluoric acid to obtain hollow CPEI nanospheres.The hollow nanospheres were characterized by X-ray photoelectron spectroscopy(XPS),transmission electron microscopy(TEM),and thermogravimetric analysis(TGA).     

co-Condensation Synthesis of Salicylaldimine Calcium Complex Containing Mesoporous Silica Nanoparticles as Carriers for Drug Release

A series of functional mesoporous silica nanoparticles（MSNs） was synthesized by a one-step simple synthesis approach involving co-condensation of tetraethoxysilane（TEOS） and salicylaldimine ligand（Sal-Si） in the presence of cetyltrimethylammonium chloride（CTAC） under basic conditions.The target MSNs with different sizes （50,100 and 200 nm,respectively） were obtained.Furthermore,the Ca^2＋ cations were also introduced into MSNs.The prepared nanoparticles were characterized by means of infrared（IR） spectra,thermogravimetric analysis（TGA）,inductively coupled plasma（ICP）,CHN elemental analysis,nitrogen adsorption-desorption,scanning electron microscope（SEM） and transmission electron microscope（TEM）.Ibuprofen（IBU） which contains carboxyl groups was selected as a model drug.The results of drug loading and release reveal that the loading capacities and release behaviors of the model drug are highly dependent on the Ca^2＋ cations in MSNs.The release of IBU from the MSNs functionalized by Ca^2＋ cations is found to be effectively controlled when compared to the release from the MSNs without the functionalization of Ca^2＋ cations,which is due to the ionic interaction between carboxyl groups in IBU and Ca^2＋ cations in MSNs.     

Reactive poly（divinyl benzene-co-maleic anhydride） nanoparticles：Preparation and characterization

Polymeric nanoparticles（NPs）have drawn great interest in the past few years due to their potential applications in the felds of biomedical and optical technologies.However,it is still a challenge to prepare functional polymeric NPs,especially for particle diameters smaller than 50 nm.In this work,we demonstrate a one-pot method to fabricate reactive poly（divinyl benzene-co-maleic anhydride）NPs（PDVBMAH NPs）through a self-stable precipitation polymerization process.The size and morphology of these PDVBMAH NPs were characterized in detail by scanning electronic microscopy,and their chemical structure was determined by IR.The results showed that these NPs were highly cross-linked and their diameter was about 30 nm with narrow distribution.Additionally,the DVB and MAH endow the NPs with reactive surface anhydride and pendant vinyl groups,and these particles could be further functionalized through reaction of these groups.A plausible pathway was proposed for the formation of PDVBMAH NPs.     

Homogeneous DNA Detection Based on Fluorescence Quenching by Nanoparticles in Single-step Format :Target-Induced Configuration Transform

A new strategy for homogeneous detection of DNA hybridization in single-step format was developed based on fluorescence quenching by gold nanoparticles. The gold nanoparticle is functionalized with 5’-thiolated 48-base oligonucleotide (probe sequence), whose 3’-terminus is labeled with fluorescein (FAM), a negatively charged fluorescence dye. The oligonucleotide adopts an extended configuration due to the electrostatic repulsion between negatively charged gold nanoparticle and the FAM-attached probe sequence. After addition of the complementary target sequence, specific DNA hybridization induces a conformation change of the probe from an extended structure to an arch-like configuration, which brings the fluorophore and the gold nanoparticle in close proximity. The fluorescence is efficiently quenched by gold nanoparticles. The fluorescence quenching efficiency is related to the target concentration, which allows the quantitative detection for target sequence in a sample. A linear detection range from 1.6 to 209.4 nmol/L was obtained under the optimized experimental conditions with a detection limit of 0.1 nmol/L. In the assay system, the gold nanoparticles act as both nanoscaffolds and nanoquenchers. Furthermore, the proposed strategy, in which only two DNA sequences are involved, is not only different from the traditional molecular beacons or reverse molecular beacons but also different from the commonly used sandwich hybridization methods. In addition, the DNA hybridization detection was achieved in homogenous solution in a single-step format, which allows real-time detection and quantification with other advantages such as easy operation and elimination of washing steps.     

SURFACE MULTI-FUNCTIONALIZATION OF POLY(LACTIC ACID) NANOPARTICLES AND C6 GLIOMA CELL TARGETING in vivo

Polysaccharide coated PLA nanoparticles bearing aldehyde groups were prepared by dialysis of DMSO solution of cholesterol hydrophobic-modified dextran polyaldehyde and PLA against water.The average diameter of the nanoparticles was about 160 nm,and the size distribution was nearly homogenous.The nanoparticles were functionalized simultaneously with CD71 and EGFR antibody through the Schiff's base reaction,and then radiolabeled with ~(99m)Tc.After perfused the radiolabeled nanoparticles into tumor-bearing...     

Synthesis and characterization of magnetic and luminescent Fe_3O_4/CdTe nanocomposites using aspartic acid as linker

In this study,the preparation of a new kind of magnetic and luminescent Fe₃O₄/CdTe nanocomposites was demonstrated. Superparamagnetic Fe₃O₄ nanoparticles were first synthesized by hydrothermal coprecipitation of ferric and ferrous ions,followed by the modification of their surfaces with tetramethylammonium hydroxide（TMAOH） and the chemical activation with aspartic acid.The surface-modified Fe₃O₄ nanoparticles were then covalently coated with CdTe quantum dots（QDs）,which were modified with mercaptoacetic acid（MPA）,to form the Fe₃O₄/CdTe magnetic and luminescent nanocomposites through the coordination of the amino groups on the surfaces of Fe₃O₄ and the carboxyl groups on CdTe QDs.The structure and properties of as-synthesized nanocomposites were characterized.It was indicated that the nanocomposites possessed structure with an average diameter of 40- 50 nm,yellow-green emission feature and room temperature ferro-magnetism.Both the fluorescence and UV-vis absorption spectra of the nanocomposites showed a blue shift comparing with those of CdTe QDs.The mechanism of the blue shift was presented.The nanocomposites retained the ferromagnetic property with a saturation magnetization of 8.9 emu/g.     

A Novel DNA‐Enrichment Technology Based on Amino‐Modified Functionalized Silica Nanoparticles

Abstract

In this paper we report a novel DNA‐enrichment technology based on amino‐modified functionalized silica nanoparticles. The approach takes advantage of the amino‐modified silica nanoparticles that have been prepared in one step by the controlled synchronous hydrolysis of tetraethoxysilane and N‐(β‐amimoethyl)‐γ‐aminopropyltriethoxysilane in water nanodroplets of water‐in‐oil microemulsions. The functionalized silica nanoparticles display a positive surface charge at neutral pH due to the presence of amino groups on the surface of these nanoparticles. DNA‐enrichment has been realized in the form of nanoparticle–DNA complexes that is accomplished through electrostatic binding between the positive charge of the amino group and the negative charge of the phosphate groups of the nucleic acid. These nanoparticles have high affinity to bind DNA. The results show that 1 mg of nanoparticles can bind 97.2 µg of plasmid DNA with 4.3 kb. This novel DNA‐enrichment technology has been used successfully in gene delivery.     

Inverted Opal Fluorescent Film Chemosensor for the Detection of Explosive Nitroaromatic Vapors through Fluorescence Resonance Energy Transfer

This paper reports an inverted opal fluorescence chemosensor for the ultrasensitive detection of explosive nitroaromatic vapors through resonance‐energy‐transfer‐amplified fluorescence quenching. The inverted opal silica film with amino ligands was first fabricated by the acid–base interaction between 3‐aminopropyltriethoxysilane and surface sulfonic groups on polystyrene microsphere templates. The fluorescent dye was then chemically anchored onto the interconnected porous surface to form a hybrid monolayer of amino ligands and dye molecules. The amino ligands can efficiently capture vapor molecules of nitroaromatics such as 2,4,6‐trinitrotoluene (TNT) through the charge‐transfer complexing interaction between electron‐rich amino ligands and electron‐deficient aromatic rings. Meanwhile, the resultant TNT–amine complexes can strongly suppress the fluorescence emission of the chosen dye by the fluorescent resonance energy transfer (FRET) from the dye donor to the irradiative TNT–amino acceptor through intermolecular polar–polar resonance at spatial proximity. The quenching response of the highly ordered porous films with TNT is greatly amplified by at least 10‐fold that of the amorphous silica films, due to the interconnected porous structure and large surface‐to‐volume ratio. The inverted opal film with a stable fluorescence brightness and strong analyte affinity has lead to an ultrasensitive detection of several ppb of TNT vapor in air.     

Core‐shell type dually fluorescent polymer nanoparticles for ratiometric pH‐sensing

The synthesis and pH‐sensing properties of fluorescent polymer nanoparticles (NPs) in the 20 nm diameter range with a sensitive dye covalently attached to the particle surface and a reference dye entrapped within the particle core are presented. Fluorescein‐functionalized NPs were readily obtained by conjugation of fluorescein isothiocyanate (FITC) to amine‐coated crosslinked polystyrene‐based nanoparticles prepared by microemulsion polymerization followed by postfunctionalization. This all water‐based method gave access to stable aqueous suspensions of pH‐sensing fluorescent NPs. The encapsulation of the insensitive reference fluorescent dye (1,9‐diphenylanthracene, DPA) was then conveniently achieved by soaking leading to dual fluorescent NPs containing about 20 DPA and 55 fluorescein, as deduced from spectroscopic analyses. This core‐shell type architecture maximizes the interactions of the sensing dye with the medium while protecting the reference dye. The variations of the ratio of the fluorescence emission intensities of the sensitive dye (fluorescein) to the reference dye (DPA) with pH show that the dual fluorescent NPs act as a ratiometric pH sensor with a measuring range between pH 4 and pH 8. This pH nanosensor was found to be fast, fully reversible, and robust without any leaching of dye over a long period of time. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6206–6213, 2008     

A fluorescence ratiometric nano-pH sensor based on dual-fluorophore-doped silica nanoparticles

We have synthesized dual-fluorophore-doped core-shell silica nanoparticles used as ratiometric pH sensor. The nanoparticles were prepared with a reverse microemulsion technique by simultaneously encapsulating two different fluorophores, the pH-sensitive dye fluorescein as a pH indicator and the pH-insensitive dye phenosafranine as an internal reference for fluorescence ratiometric measurement, into silica shell. The nanoparticles prevent the fluorescence dyes leaching from the silica matrix when immersed inside water. The hydrophilic silica shells were made by hydrolysing and polymerizing tetraethoxysilane (TEOS) in water-in-oil microemulsion. The fluorescence intensity ratio of the two dyes varied linearly as a function of pH in the range from 4.0 to 8.0. The sensor was also applied to measure pH of real water samples. The results are in good agreements with that using the conventional glass electrode method. The as-prepared fluorescent nanoparticles showed rapid response, excellent stability and high reproducibility as pH sensors.     

A Facile Approach to Fabricate Water‐soluble Au‐Fe3O4 Nanoparticle for Liver Cancer Cells Imaging

Au‐Fe₃O₄ nanoparticles were widely used as nanoplatforms for biologic applications through readily further functionalization. Dopamine (DA)‐coated superparamagnetic iron oxide (SPIO) nanoparticles (DA@Fe₃O₄) have been successfully synthesized using a one‐step process by modified coprecipitation method. Then 2–3 nm gold nanoparticles were easily conjugated to DA@Fe₃O₄ nanoparticles by the electrostatic force between gold nanoparticles and amino groups of dopamine to afford water‐soluble Au‐Fe₃O₄ hybrid nanoparticles. A detailed investigation by dynamic light scatting (DLS), transmission electron microscopy (TEM), fourier transform infrared (FT‐IR) and X‐ray diffraction (XRD) were performed in order to characterize the physicochemical properties of the hybrid nanoparticles. The hybrid nanoparticles were easily functionalized with a targeted small peptide A54 (AGKGTPSLETTP) and fluorescence probe fluorescein isothiocyanate (FITC) for liver cancer cell BEL‐7402 imaging. This simple approach to prepare hybrid nanoparticles provides a facile nanoplatform for muti‐functional derivations and may be extended to the immobilization of other metals or bimolecular on SPIO surface.     

Enzyme‐Responsive Intracellular‐Controlled Release Using Silica Mesoporous Nanoparticles Capped with ε‐Poly‐L‐lysine

The synthesis and characterization of two new capped silica mesoporous nanoparticles for controlled delivery purposes are described. Capped hybrid systems consist of MCM‐41 nanoparticles functionalized on the outer surface with polymer ε‐poly‐L ‐lysine by two different anchoring strategies. In both cases, nanoparticles were loaded with model dye molecule [Ru(bipy)₃]²⁺. An anchoring strategy involved the random formation of urea bonds by the treatment of propyl isocyanate‐functionalized MCM‐41 nanoparticles with the lysine amino groups located on the ε‐poly‐L ‐lysine backbone (solid Ru‐rLys‐S1 ). The second strategy involved a specific attachment through the carboxyl terminus of the polypeptide with azidopropyl‐functionalized MCM‐41 nanoparticles (solid Ru‐tLys‐S1 ). Once synthesized, both nanoparticles showed a nearly zero cargo release in water due to the coverage of the nanoparticle surface by polymer ε‐poly‐L ‐lysine. In contrast, a remarkable payload delivery was observed in the presence of proteases due to the hydrolysis of the polymer’s amide bonds. Once chemically characterized, studies of the viability and the lysosomal enzyme‐controlled release of the dye in intracellular media were carried out. Finally, the possibility of using these materials as drug‐delivery systems was tested by preparing the corresponding ε‐poly‐L ‐lysine capped mesoporous silica nanoparticles loaded with cytotoxic drug camptothecin (CPT), CPT‐rLys‐S1 and CPT‐tLys‐S1 . Cellular uptake and cell‐death induction were studied. The efficiency of both nanoparticles as new potential platforms for cancer treatment was demonstrated.     

Hybrid Organic–Inorganic Silica Gel Carriers with Controlled Drug‐Delivery Properties

Pure and modified silica materials were synthesised by a sol–gel process and used as carrier for the controlled release of ibuprofen, selected as model drug. A one‐step synthesis was optimised for the preparation of various silica–drug composites by using tetraethoxysilane and 3‐aminopropyltriethoxysilane as precursors at different molar ratios. The presence of aminopropyl groups on the silica surface influences the drug‐delivery rate leading to a high degree the desorption process controlled.     

Fabrication and functionalization of dendritic poly(amidoamine)-immobilized magnetic polymer composite microspheres

The synthesis of functionalized magnetic polymer microspheres was described by a process involving (1) preparation of the monodisperse magnetic seeds according to a two-step procedure including the preparation of bilayer-oleic acid-coated Fe3O4 nanoparticles followed by soap-free emulsion polymerization with methyl methacrylate (MMA) and divinyl benzene (a cross-linking agent, DVB); (2) seeded emulsion polymerization proceeding under the continuous addition of glycidyl methacrylate (GMA) monomers in the presence of the magnetic PMMA seeds; and (3) chemical modification of the PGMA shells with ethylenediamine (EDA) to yield amino groups. As such, the magnetic poly(MMA-DVB-GMA) microspheres were prepared possessing monodispersity, uniform magnetic properties, and abundant surface amino groups. Then, the dendritic poly(amidoamine) (PAMAM) shells were coated on the magnetic particles on the basis of the Michael addition of methyl acrylate and the amidation of the resulting ester with a large excess of EDA, which could achieve generational growth under such uniform stepwise reactions. For improving the luminescence properties of the composite particles, fluorescein isothiocyanate, which is a popular organic dye, was reacted with the terminal -NH2 groups from the dendritic PAMAM shells, resulting in the formation of multifunctional microspheres with excellent photoluminescence, superparamagnetic, and pH-sensitive properties. In this case, it can be expected that an extension of the functionalization of these microspheres is to immobilize other target molecules onto the PAMAM shells to introduce other desired functions for potential chemical and biological applications.     

A Novel Route to Organic–Inorganic Hybrid Nanomaterials

The in situ formation of functionalized silica nanoparticles is reported. The reactive stabilizers used in the study, [3‐(2‐bromoisobutyryl)propyl]triethoxysilane and [3‐(2‐bromoisobutyryl)propyl]ethoxydimethylsilane, have an atom transfer radical polymerization (ATRP) initiator at the noncondensable end. Condensation with tetraethoxysilane yields silica nanoparticles with a surface‐immobilized initiator. The size of these functionalized silica nanoparticles can be controlled by varying the time of initiator addition and initiator concentration. The silica particle sizes ranged from 10 to 300 nm. With the initiator functionalized silica nanoparticles, ATRP synthesis was performed with styrene, tert‐butyl acrylate, and methyl acrylate to produce organic–inorganic nanomaterials.

     

双重对象同时检测的新型荧光纳米粒子传感器的制备

报道了一种基于荧光共振能量转移理论合成的新型纳米粒子. 新型纳米粒子A中掺杂了由亲和素-生物素桥联并可发生荧光共振能量转移(FRET)的供体染料和受体染料; 新型纳米粒子B中只掺杂了供体染料. 在使用供体染料的特征激发波长同时激发纳米粒子A和B时, 纳米粒子A由于荧光共振能量转移而发射出受体染料的特征波长, 而纳米粒子B则只发射供体染料的特征波长. 这样, 在单一波长激发下, 可很容易地实现双重对象同时检测.