Interaction and Scale of Mixing in Cellulose Acetate/Poly(<Emphasis Type="Italic">N</Emphasis>-vinyl Pyrrolidone-co-vinyl Acetate) Blends

Binary blends and pseudo complexes of cellulose acetate (CA) with vinyl polymers containing N-vinyl pyrrolidone (VP) units, poly(N-vinyl pyrrolidone) (PVP) and poly(N-vinyl pyrrolidone-co-vinyl acetate) [P(VP-co-VAc)], were prepared, respectively, by casting from mixed polymer solutions in N,N-dimethylformamide as good solvent and by spontaneous co-precipitation from solutions in tetrahydrofuran as comparatively poor solvent. The scale of miscibility and intermolecular interaction were examined for the blends and complexes by solid-state ¹³C-NMR spectroscopy. It was revealed that the formation of complexes was due to a higher frequency of hydrogen-bonding interactions between the residual hydroxyl groups of CA and the carbonyl groups of VP residues in the vinyl polymer component. From measurements of CP/MAS spectra and proton spin-lattice relaxation times (T_1ρ^H) in the NMR study, the existence of the hydrogen-bonding interaction was also confirmed for the miscible blends and the homogeneity of the mixing was estimated to be substantially on a scale within a few nanometers.     

CP/MAS NMR investigations of silica gel surfaces modified with aminopropylsilane

Summary Aminopropyl chemically bonded phases for high performance liquid chromatography (HPLC) have been prepared using mono- and trifunctional methoxyor ethoxysilanes. Three types of silica gel with different surface characteristics were used as support for the chemically bonded phases (CBPs). Surface characteristics of the packings before and after chemical modification were determined by porosity parameters, elemental analysis and CP/MAS NMR spectroscopy.²⁹Si and¹³C CP/MAS NMR investigations gave informations about different interactions between aminosilyl ligands and/or these ligands and/or water molecules condensed in the pores of the silica gel surface. With decreasing pore diameter of the silica gel the proportion of protonated aminopropyl ligand increases.     

Application of solid-state NMR (13C and 29Si CP/MAS NMR) spectroscopy to the characterization of alkenyltrialkoxysilane and trialkoxysilyl-terminated polyisoprene grafting onto silica microparticles

The solid-state Nuclear Magnetic Resonance (NMR) was used to characterize surfaces of silica gels chemically modified by alkenyltrialkoxysilanes and trialkoxysilyl terminated 1,4-polyisoprenes. The formation of covalent bonds created between alkoxy functional groups from alkenyltrialkoxysilane or trialkoxysilyl-terminated 1,4-polyisoprene and silanol groups on silica was clearly demonstrated by means of ¹³C and ²⁹Si CP/MAS NMR spectroscopy. Quantitative data, including calculation of the grafting yields in relation with the initial silanol concentrations, were also obtained by using solid-state ²⁹Si-NMR leading to a final well-defined characterization of the silica surfaces. A relatively good agreement was noticed between the grafting yields calculated from ²⁹Si-NMR spectra and those determined from other analytical techniques such as Wijs titration or elementary analysis. The reactivity of the various silica silanols towards each coupling agent was clearly characterized and estimated, as were the proportions of the various grafted structures formed at the silica surface. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36 : 437–453, 1998     

Liquid crystalline polymers as stationary phases. IV. Chemical bonding and immobilization of the polymer on silica characterization by solid-state nuclear magnetic resonance spectroscopy

Chemical bonding reaction and immobilization through low energy radiation (heating) have been investigated to fix a side-chain liquid crystalline polymer (SC-LCP) on silica particles in order to use the resulting modified silica in normal-phase HPLC. Highly stable chromatographic stationary phases are observed under excellent polymer solvent flow conditions (THF) for both methods and better column efficiencies are also exhibited towards PAHs' separation compared to the classical coated stationary phase. The characterization of these new stationary phases and the rationale for improved column stability have been investigated by solid state 13C and 29Si CP/MAS NMR spectroscopy. It is clearly shown that the chemical bonding is achieved by the classical hydrosilylation reaction between PHMS chains and vinyl modified silica. The bonded polymer is likely a copolymer than a homopolymer. The immobilization of the SC-LCP by heating results in the breaking of Si-O-Si bonds of the polysiloxane chain after the attack of the silica surface silanols. Applications to fullerenes and carotenes separation of these bonded stationary phases are compared to the separation power of a classical monomeric C18 stationary phase in NP-HPLC as n-hexane-toluene or methyl-tertiobutyl ether-methanol mixtures.     

Synthesis, self-assembling properties, and atom transfer radical polymerization of an alkylated L-phenylalanine-derived monomeric organogel from silica: a new approach to prepare packing materials for high-performance liquid chromatography

The monomer N'-octadecyl-N(alpha)-(4-vinyl)-benzoyl-L-phenylalanineamide (4) based on L-phenylalanine has been simply but effectively synthesized, and its self-assembling properties have been investigated. FTIR and a variable-temperature (1)H NMR spectroscopic investigation demonstrated that the aggregation of compound 4 in various organic solvents is due to the formation of intermolecular hydrogen bonds among the amide moieties. UV/Vis measurements indicated that the multiple pi-pi interactions of the phenyl groups also contribute to the self-assembly. As was observed by (13)C cross-polarization magic-angle spinning (CP/MAS) NMR and variable-temperature (1)H NMR measurements, the ordered alkyl chains also played an important role in the molecular aggregation by van der Waals interactions. Compound 4 was polymerized by surface-initiated atom transfer radical polymerization from porous silica gel to prepare a packing material for HPLC. The results of thermogravimetric analysis showed that a relatively large amount of polymer was grafted onto the silica surface. The organic phase on silica was in a noncrystalline solid form in which the long alkyl chain exists in a less-ordered gauche conformation. Analysis of chromatographic performance for polyaromatic hydrocarbon samples showed higher selectivity than conventional reversed-phase HPLC packing materials.     

Surface Modification of Colloidal Silica by Sulfonation Route for Super-Hydrophilicity

Colloidal silica was chemically modified by a two-step method including an olefin sulfonation route as a preliminary study for super-hydrophilic applications. The hydrophobic vinyl groups were initially bonded chemically to the hydroxylated silica surface using the trichlorosilane coupling agents. The vinyl-terminated silica was then sulfonated by addition reaction with chlorosulfonic acid. The modified silica was investigated using DRIFT, TGA, element analysis, solid-state ²⁹Si- and ¹³C CP-MAS NMR. The vinyl-terminated specimen showed a characteristic IR absorption band at 1600 cm^–1 and a weight loss of approximately 3% starting at 350°C while the ²⁹Si NMR peaks at 70.9 and 79.8 ppm and ¹³C NMR at 136 ppm and 129.8 ppm were assigned to a vinyl group bonded to silica. Elemental analysis of the sulfonated silica indicated the presence of sulfur, carbon and hydrogen. Thermal decomposition in range 150–600°C was due to the presence of sulfonated organics and unreacted vinyl groups while the new signals on ¹³C NMR, which were in the range 70–15 ppm, were assigned to sulfonated carbons.     

Covalent Assembly of Hierarchical Particles by Efficient Coupling of β‐Diketones and Benzyl Chloride

A coupling reaction is performed between polymeric nanoparticles and microparticles via the nucleophilic substitution of pendent β‐diketone groups with benzyl chloride. The coupling reaction results in the formation of hierarchical particles, through the nanoparticles being covalently linked onto the microparticles. The coupling reaction is tracked by TEM and SEM, and the formation of covalent C–C bonds through the coupling reaction between the polymeric nanoparticles and microparticles is confirmed by solid‐state ¹³C CP‐MAS NMR spectroscopy and XPS. The proposed coupling reaction between the nanoparticles and the microparticles is believed to be a promising strategy in particle‐surface modification.     

A two-dimensional infrared correlation spectroscopic study on the thermal degradation of poly(2-hydroxyethyl acrylate)-co-methyl methacrylate/SiO2 nanohybrids

Two-dimensional infrared (2D IR) correlation spectroscopy was applied to study the structural changes occurring in the decomposition of PHEA-co-MMA/SiO₂. Complicated absorption spectral changes were observed in the heating process. 2D IR analysis indicates that during heating, covalent bonds, (Si-O-C), between the polymer and the inorganic moiety were formed, which was the main factor in the improvement in thermal properties of the hybrids such as the decomposition temperatures (T_d). The thermal stability of the hybrids was also studied by solid-state ²⁹Si MAS NMR spectroscopy and TGA tests. Their results complemented each other well.     

Studies of silicon nanocluster ligand coating by solid-state NMR

Silicon nanoclusters were studied by ²⁹Si and ¹³C MAS NMR (magic angle spinning) spectroscopy. We for the first time confirmed the cleavage of ordinary ether C—O bonds of the solvent in the process of the synthesis of nanoclusters and the “binding” of the decomposition products to the surface of silicon nanoparticles as ligands. The applicability of MAS NMR spectroscopy in the studies of silicon nanocluster ligand coating and in the determination of the processes leading to the formation of the nanoparticle ligand shell was demonstrated.     

The Structure of Hybrid Gels by Drift and NMR Spectroscopies

Hybrid inorganic-organic gels have been prepared by the sol-gel process using tetraethoxysilane (TEOS) as precursor, mixed with a low concentration of polytetrahydrofuran (PTHF), under acid catalysis. The hybrid xerogels were characterized by DRIFTS and Solid State ¹H, ¹³C and ²⁹Si NMR. The DRIFT spectra indicate that the polymer is responsible for decreasing the number of free silanol groups in comparison to pure silica. Solid-state NMR spectra reveal the types of silicate structures formed and the conditions for establishing chemical bonds between the two phases, which are responsible for the silica network flexibility. We have concluded that it is possible to design a hybrid gel with tailored properties, even at very low polymer concentration, by selecting the appropriate preparation route.     

Controlled synthesis of stable poly(vinyl formamide-co-vinyl amine)/silica hybrid particles by interfacial post-cross-linking reactions

 The chemical synthesis and the physicochemical properties of stable poly(vinyl formamide-co-vinyl amine)/silica hybrid particles are presented. Copolymers of poly(vinyl formamide) (PVFA) and poly(vinyl amine) (PVAm) and their protonated forms were adsorbed onto silica from aqueous solutions. The influences of the pH strength and the ion concentration of the aqueous solution as well as the copolymer composition (degree of hydrolyzation of PVFA), and the molecular mass on the adsorption process were investigated by electrokinetic measurements, potentiometric titration, and quantitative elemental analyses. Silica surface-charge neutralization is achieved at a pH strength above 10 for highly hydrolyzed (95%) PVFA polymers. Decreasing the amino content in the PVAm chain shifts successively both the point of zero charge and the isoelectric point to lower pH values. PVFA-co-PVAm layers onto silica are adsorbed weakly. To fix these layers irreversibly, cross-linking reactions with (4,4′-diisocyanate)diphenyl methane were carried out on the surface of solid PVFA-co-PVAm/silica hybrid particles suspended in acetone. The cross-linking reaction, which is connected with the conversion of amino groups, is also a tool to control the surface charge of the PVFA-co-PVAm/silica hybrids. X-ray photoelectron spectroscopy and solid-state ¹³C cross-polarization magic-angle spinning NMR spectroscopy were used to obtain information on the number of and the structure of the functionalized polyelectrolyte layers on silica. The success of cross-linking was also shown by the results of these spectroscopic methods. Received: 28 June 1999 /Accepted: 27 August 1999     

Poly(bismethylene hydroquinone) (PBHQ). I. Synthesis and characterization

Poly(bismethylene hydroquinone) (PBHQ) has been synthesized. Fourier transform infrared, ¹³C solid-state CP/MAS NMR and elemental analysis provide strong evidence of two methylene bridges per hydroquinone molecule. The polymer was (1) air oxidized using ammonia and (2) chemically oxidized using bromine/KOH. The initial structure and oxidation process was studied by comparison of the unoxidized and oxidized polymers using Fourier transform infrared, elemental analysis, and ¹³C solid-state CP/MAS NMR.     

Analysis of silica hydride and surface hydrosilation reactions by solid-state NMR in the preparation of<Emphasis Type="Italic"> p</Emphasis>-chlorobenzamide bonded silica phase

²⁹Si and ¹³C CP-MAS NMR spectroscopy was used to follow the conversion of native silica to a p-chlorobenzamide bonded silica material. The benzamide bonded phase was prepared via a hydrosilation reaction of a hydride silica intermediate with p-chloro-N-allylbenzamide. Solid-state NMR was used to show the disappearance of reactive surface hydride species (M_H) and to identify newly formed bonded chemical species on the silica surface. DRIFT spectroscopy, elemental analysis, and specific surface-area determinations (BET) of the prepared phases are also reported.     

Thiophene-based conjugated microporous polymers: synthesis,characterization and efficient gas storage

A series of thiophene-based conjugated microporous polymers(ThPOPs) have been synthesized on the basis of ferric chloride-catalyzed oxidative coupling polymerization of multi-thienyl monomers. The structures of ThPOPs were confirmed via solid-state 13 C CP/MAS NMR spectroscopy and Fourier-transform infrared spectroscopy. The ThPOPs possess high porosities and their high Brunauer-Emmett-Teller specific surface area results vary between 350 and 1320 m~2 g~(-1). The presence of abundant ultra-micropores at 0.50–0.63 nm allows ThPOPs efficient gas(carbon dioxide, methane, and hydrogen) adsorption.     

Solid‐State NMR Characterization of Wilkinson’s Catalyst Immobilized in Mesoporous SBA‐3 Silica

The Wilkinson’s catalyst [RhCl(PPh₃)₃] has been immobilized inside the pores of amine functionalized mesoporous silica material SBA‐3 and The structure of the modified silica surface and the immobilized rhodium complex was determined by a combination of different solid‐state NMR methods. The successful modification of the silica surface was confirmed by ²⁹Si CP‐MAS NMR experiments. The presence of the T_n peaks confirms the successful functionalization of the support and shows the way of binding the organic groups to the surface of the mesopores. ³¹P‐³¹P J‐resolved 2D MAS NMR experiments were conducted in order to characterize the binding of the immobilized catalyst to the amine groups of the linkers attached to the silica surface. The pure catalyst exhibits a considerable ³¹P‐³¹P J‐coupling, well resolvable in 2D MAS NMR experiments. This J‐coupling was utilized to determine the binding mode of the catalyst to the linkers on the silica surface and the number of triphenylphosphine ligands that are replaced by coordination bonds to the amine groups. From the absence of any resolvable ³¹P‐³¹P J‐coupling in off‐magic‐angle‐spinning experiments, as well as slow‐spinning MAS experiments, it is concluded, that two triphenylphosphine ligands are replaced and that the catalyst is bonded to the silica surface through two linker molecules.     

Catalysis of hydrosilylation by well-defined rhodium siloxide complexes immobilized on silica

Rhodium surface siloxide complexes were prepared directly by condensation of the molecular precursors ([{Rh(μ-OSiMe₃)(cod)}₂], [{Rh(μ-OSiMe₃)(tfb)}₂], [{Rh(μ-OSiMe₃)(nbd)}₂]) with silanol groups on silica surface (Aerosil 200 and SBA-15) and their structures were characterized by ¹³C and ²⁹Si CP/MAS NMR spectroscopy. Such single-site complexes were tested for their activity in hydrosilylation of carbon–carbon double bonds with triethoxysilane, heptamethyltrisiloxane and poly(hydro,methyl)(dimethyl)siloxane. The best catalyst appeared to be cyclooctadiene ligand-containing rhodium siloxide complex immobilized on Aerosil which was recycled as many as 20 times without loss of activity and selectivity in hydrosilylation of vinylheptamethyltrisiloxane with heptamethyltrisiloxane. On the ground of CP/MAS NMR measurements it was established that the mechanism of hydrosilylation catalyzed by silica-supported rhodium siloxide complexes is different from that for the complexes in the homogeneous system.     

Direct probing of sorbent-solvent interactions for amylose tris(3,5-dimethylphenylcarbamate) using infrared spectroscopy, X-ray diffraction, solid-state NMR, and DFT modeling

The sorbent-solvent interactions for amylose tris(3, 5-dimethylphenylcarbamate) (ADMPC) with five commonly used solvents, hexane, methanol, ethanol, 2-propanol (IPA), and acetonitrile (ACN), are studied using attenuated total reflection infrared spectroscopy (ATR-IR) of thin sorbent films, X-ray diffraction (XRD) of thin films, (13)C cross polarization/magic angle spinning (CP/MAS) and MAS solid state NMR of polymer-coated silica beads (commercially termed "Chiralpak AD"), and DFT modeling. The ADMPC-polymer-coated silica beads are used commercially for analytical and preparative scale separations of chiral enantiomers. The polymer forms helical rods with intra- and inter-rod hydrogen bonds (H-bonds). There are various nm-sized cavities formed between the polymer side-chains and rods. The changes in the H-bonding states of the C=O and NH groups of the polymer upon absorption of each of the five solvents at 25 degrees C are determined with ATR-IR. The IR wavenumbers, the H-bonding interaction energies, and the H-bonding distances of the polymer side-chains with each of the solvent molecules are predicted using the DFT/B3LYP/6-311+g(d,p) level of theory. The changes in the polymer crystallinity upon absorption of each solvent are characterized with XRD. The changes in the polymer crystallinity and the H-bonding states of C=O groups are also probed with (13)C CP/MAS solid-state NMR. The changes in the polymer side-chain mobility are detected using (13)C MAS solid-state NMR. The H-bonding states of the polymer change upon absorption of each polar solvent and usually result in an increase in the polymer crystallinity and the side-chain mobility. The polymer rods are reorganized upon solvent absorption, and the distance between the rods increases with the increase in the solvent molecular size. These results have implications for understanding the role of the solvent in modifying the structure and behavior of the polymer sorbents.     

Tuning of the molecular packing structure of comb-shaped polymer-grafted silica by using surface-initiated ATRP to enhance the molecular-shape selectivity towards polycyclic aromatic hydrocarbons

Poly(octadecyl acrylate)-grafted silicas were prepared by surface-initiated atom transfer radical polymerization (ATRP). Initially, undecyl ester and allyl ester-based ATRP initiators were synthesized and then immobilized on silica. The surface-initiated ATRP of octadecyl acrylate was carried out from the initiator-grafted silicas using copper(I) bromide and N,N,N′,N′,N′′-pentamethyldiethylenetriamine as catalyst precursors to produce poly(octadecyl acrylate)-grafted silicas, Sil-C₁₁-ODA_n (obtained from undecyl ester) and Sil-C₃-ODA_n (originated from allyl ester), respectively. Both Sil-C₁₁-ODA_n and Sil-C₃-ODA_n were characterized by DRIFT, suspension-state ¹H NMR, solid-state ¹³C CP/MAS NMR spectroscopies, thermogravimetric analysis (TGA), elemental analysis and differential scanning calorimetry (DSC) measurements. Suspension-state ¹H NMR, solid-state ¹³C CP/MAS NMR and DSC analyses suggest that Sil-C₁₁-ODA_n demonstrated more ordered structure than Sil-C₃-ODA_n. In this paper, it is also described that for ordering of the polymer phase is accompanied by the selectivity increase for the separation of poly cyclic aromatic hydrocarbons (PAHs) in RP-HPLC.     

Pentacyanoferrates(II) on the surface of organomodified silica gel: The matrix effect

Pentacyanoferrate(II) absorbed on a silica gel surface previously modified with 3-aminopropyl and 3-imidazolylpropyl groups were characterized by¹³C MAS/NMR, FT-IR, Mössbauer spectroscopy, and cyclic voltammetry. FT-IR and¹³C MAS/NMR data indicated that the pentacyanoferrate(II) complex is bonded to the surface by the nitrogen atom of the functional group. The differences in the isomeric shifts, the quandrupole splittings and the midpoint potentials of the adsorbed complexes in comparison with the model complexes were attributed to the matrix polar effect—i.e., the interaction of the complex with polar groups on the silica surface.     

Modification and intercalation of layered zirconium phosphates: a solid‐state NMR monitoring

Several layered zirconium phosphates treated with Zr(IV) ions, modified by monomethoxy‐polyethyleneglycol‐monophosphate and intercalated with doxorubicin hydrochloride have been studied by solid‐state MAS NMR techniques. The organic components of the phosphates have been characterized by the ¹³C{¹H} CP MAS NMR spectra compared with those of initial compounds. The multinuclear NMR monitoring has provided to establish structure and covalent attachment of organic/inorganic moieties to the surface and interlayer spaces of the phosphates. The MAS NMR experiments including kinetics of proton‐phosphorus cross polarization have resulted in an unusual structure of zirconium phosphate 6 combining decoration of the phosphate surface by polymer units and their partial intercalation into the interlayer space. Copyright © 2016 John Wiley & Sons, Ltd.