Metal Complexes with Macrocyclic Ligands. Part XLI. Nickel(II) and copper(II) complexes with mono-N-functionalized dithiadiazamacrocycles

Three N₂S₂ macrocycles ( 3, 10, 12 ) carrying an amino group as a pendant arm have been synthesized and their complexation properties towards Ni²⁺ and Cu²⁺ studied. The crystal structures of the Cu²⁺ complexes with 10-methyl-1,4-dithia-7,10-diazacyclododecane-7-ethanamine ( 3 ) and 11-methyl-1,4-dithia-8,11-diazacyclotetradecane-8-ethanamine ( 10 ) show that, in both cases, the Cu²⁺ is pentacoordinated by the four donor atoms of the macrocycle and the amino group of the side chain. In aqueous solution, however, two forms of the complexes with stoichiometries [MLH] and [ML] (M = Cu²⁺ or Ni²⁺) have been observed. In [MLH], the amino group is protonated and does not bind to the metal ion, whereas in [ML] the amino group is bound, and a pentacoordinated geometry results. The pK_a values for the equilibrium [ML] + H⁺?[MLH]⁺ decrease in the order 12 > 10 > 3 , indicating that the 2-aminoethyl side chain binds better to the Cu²⁺ than the 3-aminopropyl side chain. Cyclic voltammetry for the Cu²⁺/Cu⁺ pair shows that the 2-aminoethyl pendant arm stabilizes the Cu²⁺ oxidation state, when the metal ion is in the 14-membered ring ( 10 ), whereas it stabilizes Cu⁺ for the 12-membered macrocycle ( 3 ).     

Dimerization of copper(II) decanoate in 1,4-dioxane-water mixed solvents

Complex formation of copper(II) with decanoic acid (HA) has been studied by potentiometric measurement in 1,4-dioxane-water mixtures at a constant ionic concentration of 0.1 mol dm^?3 (Na, H)ClO₄ and at 25°C. The experimental data can be interpreted with the formation of CuA⁺, CuA₂ and Cu₂A₄. The dimerization constant formulated as:

was found to be log K_dim = 3.75, 4.02 and 4.26 for 0.3, 0.4 and 0.5 mole fractions of dioxane, respectively. Absorbances at 373 and 670 nm are interpreted with the aid of the formation constants determined by potentiometry. Solvent effect on the dimerization of the monomeric copper(II) decanoate is discussed on the basis of selective solvation of CuA₂ and Cu₂A₄ with water molecules.     

Metal complexes with macrocyclic ligands. Part XIX. Synthesis and Cu2+-complexes of a series of 12-, 14- and 16-membered cis- and trans-N2S2-macrocycles

A series of 12-, 14-, and 16-membered N₂S₂-macrocycles ( 9–11 and 19–21 ) with cis and trans-arrangement of the heteroatoms have been synthesized by high-dilution cyclization and subsequent reduction of the amides with B₂H₆. With these ligands the corresponding Cu²⁺-complexes were prepared and their UV/VIS spectra, their electrochemistry and their EPR properties have been studied. Generally three absorption bands at 270–320 nm, 330–370 nm and 530–620 nm can be observed in aqueous solution and these have been assigned to the N→Cu²⁺ and S→Cu²⁺ charge-transfer bands and to the d-d* transition, respectively. The cyclic voltammetry in CH₃CN shows in all cases a reversible or quasi-reversible Cu²⁺/Cu⁺-transition at potentials of 10–480 mV against SHE. The values of g_‖ and A_‖ obtained from EPR spectra indicate that the geometry of the Cu²⁺-complex of the 14-membered cis-N₂S₂-macrocycle is less distorted than that of the other complexes.     

Nickel(II) and copper(II) complexes of aza macrocycles derived from trichloromethane

Syntheses of nickel(II) complexes of the tetraaza macrocycles 2,7-dichloro-1,3,6,8-tetraazacyclodecane (DCCD) and 2,8-dichloro-1,3,7,9-tetraazacyclododecane (DICD) and a copper(II) complex of 2,6,8,12,13,17-hexaazabicyclo[5.5.5]heptadecane (HBCH) are reported in the template condensation of trichloromethane with 1,2-diaminoethane or 1,3-diaminopropane. Formulation of the synthesized products [Ni(DCCD)(H₂O)₂]Cl₂, [Ni(DICD)(H₂O)₂]Cl₂?·?H₂O, and [Cu₃(HBCH)(H₂O)₆]Cl₆, and the metal-free ligand hydrochloride HBCH?·?6HCl has been confirmed by elemental analyses, conductivity measurements, and spectral studies. Potentiometric studies of nickel(II) and copper(II) complexes of HBCH and structurally similar 2,5,8,10,13,16,17,20,23-nonaazabicyclo[7.7.7]tricosane (NACT, earlier derived from trichloromethane and diethylenetriamine) have also been performed in the structural support of HBCH. In 1?:?1, metal?:?HBCH solution, copper(II) is coordinated to four N-donors of two-HN(CH₂)₃NH– groups of the ligand in a non-planar tetraaza cavity. The equilibrium constant value (log?K?=?15.41) for the reaction Cu^2+?+?A???CuA²⁺ (A?=?HBCH) is in favor of the cyclic structure of the ligand. A high value (log?K?=?23.27) for corresponding reaction in the NACT system is due to conformational change in the ligand, where copper(II) organizes the macrocycle to form a nearly planar cavity in which the cation fits well.     

Hyperbranch-polyethyleniminated functional polymers II: effect of polyethyleniminated polyoxypropylenediamines on copper nanoparticle formation in aqueous solution

Colloidal aqueous solution of zerovalent copper (Cu(0)) nanoparticles were prepared from the Cu²⁺ ions coordinated with polyethyleniminated polyoxypropylenediamines (D400(EI) _x ) followed by chemical reduction of NaBH₄. Aqueous solution of copper clusters formed in the presence of D400(EI)₈ with a loading ratio of [EI]/[Cu²⁺] = 3 were stable without precipitation for standing more than 1 month. The protective effects of D400(EI) _x and the particle size of the resulted Cu nanoparticle are regulated by the attachments of ethylenimine (EI) groups per polymer backbone and the normality ratio of [EI]/[Cu²⁺] used. It is found that the more EI-content per polymer backbone results in the smaller particle size and the narrower size dispersity of the colloidal Cu(0) particles, and the average particle size of 5.07 nm with standard deviation of 0.86 nm was obtained in the presence of D400(EI)₈ with the ratio of [EI]/[Cu²⁺] = 3. As the polymer concentration of D400(EI)₈ increases (the increase of [EI]/[Cu²⁺]), the average particle size of the prepared Cu(0) nanoparticle slightly changes, but interestingly, the size dispersity gradually decreases, where the standard deviation for the concentration at [EI]/[Cu²⁺] = 5 is 0.82 nm approaching that for monodispersed nanoparticles (0.5 nm).     

Structural Aspects of the Dephosphorylation of Adenosine Triphosphate Catalyzed by Polyammonium Macrocycles

Abstract

Four polyammonium macrocycles were synthesized and characterized: two with 21-membered rings and differing numbers of oxygen and nitrogen heteroatoms, [21]N₆O (1) and [21]N₅O₂ (2), and two with bipyridine incorporated into the ring, [24]N₄O₂bipy (3) and [27]N₃O₂bipy (4). Their ability to catalyze the dephosphorylation of adenosine triphosphate was examined. It was found that ring size plays a crucial role in the catalytic ability of the macrocycles, with the 21-membered rings being superior to larger macrocycles. Also, rates of dephosphorylation were found to increase with increasing number of nitrogen atoms in the ring. For two of the macrocycles, crystal structures were determined. Macrocycle 2 crystallizes in the tricliriic space group PI, a = 10.692(1), b = 17.037(2), c = 8.1952(8)Å, a = 92.550(9), β = 100.816(9), γ = 106.77(1)°, V = 1396.1(3) ų; the structure was solved to R = 0.089 and R _w = 0.098. Macrocycle 4 crystallizes in the monoclinic space group P2₁/n, a = 14.589(1), b = 15.427(1), c = 16.382(1) Å, b = 90.137(6)°, V = 3687.0(9) ų; the structure was solved to R = 0.056 and R _w = 0.085.     

Copper(II) complexing with 2′,2′-diethylheptanohydrazide

Acid-base properties of 2′,2′-diethylheptanohydrazide (DEHH) and its complex formation with copper(II) ions in water-isopropanol solutions were studied. Cationic complexes with [Cu²⁺] : [DEHH] ratios of 1 : 1 and 1 : 2 were found to be formed in weak acid media, and an uncharged complex with a [Cu²⁺] : [DEHH] ratio of 1 : 2 was found to be formed in a basic medium. log K _st values were determined. The data obtained were compared with the stability constants of copper(II) 2′,2′-diethylbenzohydrazide complexes.     

A new copper containing MALDI matrix that yields high abundances of [Peptide + Cu]+ ions

The dinuclear copper complex (α-cyano-4-hydroxycinnamic acid (CHCA) copper salt (CHCA)₄Cu₂), synthesized by reacting CHCA with copper oxide (CuO), yields increased abundances of [M + xCu − (x−1)H]⁺ (x = 1–6) ions when used as a matrix for matrix-assisted laser desorption ionization (355 nm Nd:YAG laser). The yield of [M + xCu − (x−1)H]⁺ (x = 1∼6) ion is much greater than that obtained by mixing peptides with copper salts or directly depositing peptides onto oxidized copper surfaces. The increased ion yields for [M + xCu − (x−1)H]⁺ facilitate studies of biologically important copper binding peptides. For example, using this matrix we have investigated site-specific copper binding of several peptides using fragmentation chemistry of [M + Cu]⁺ and [M + 2Cu − H]⁺ ions. The fragmentation studies reveal interesting insight on Cu binding preferences for basic amino acids. Most notable is the fact that the binding of a single Cu⁺ ion and two Cu⁺ ions are quite different, and these differences are explained in terms of intramolecular interactions of the peptide-Cu ionic complex.     

Metal Complexes with Macrocyclic Ligands. Part XL. Syntheses and silver(I) complexes of mono- and disubstituted dithiadiazamacrocycles

A series of N₂S₂-macrocycles with ring sizes varying between 12 and 16, as well as two 12-membered N₂S₂-rings with a pendant carboxylic and amino group, respectively, were synthesized. Their complexation properties towards Ag⁺ were studied by pH titrations and by potentiometry with a silver electrode. The observation that 1:1 ([AgLH₂]³⁺, [AgLH]²⁺, [AgL]⁺) and 1:2 species ([AgL₂H₂]³⁺, [AgL₂H]²⁺, [AgL₂]⁺) were formed is interpreted by postulating that Ag⁺ can bind either to the S-donors only, or to both the N- and S-atoms. The most stable complex [AgL]⁺ in the series of the nonfunctionalized macrocycles was found for the 12-membered N₂S₂-ring 3 . The stability of it increased when an additional donor group was introduced into the side chain. The highest formation constant (logβ₁₁₀ = 14.43(1)) was obtained with the 12-membered ring 12 carrying the ethanamine side chain. In view of a radiochemical application, all Ag⁺ complexes were tested in blood serum for their stability, but were not stable enough against transmetallation.     

DNA intercalating studies of [Ru(bpy)<Subscript>2</Subscript>HPIP]<Superscript>2+</Superscript> with intramolecular hydrogen bond ligand based on introduction of copper ion

The effects of copper ion on the interaction of [Ru(bpy)₂HPIP]²⁺(bpy = 2,2′-bipyridine, HPIP = 2-(2-hydroxyphenyl) imidazo [4,5-f] [1, 10] phenanthroline) with DNA have been investigated by electronic absorption spectroscopy and fluorescence spectroscopy. HPIP ligand of the complex with an intramolecular hydrogen bond can bind Cu²⁺ in the absence of DNA, as revealed by the absorbance and fluorescence decrease for [Ru(bpy)₂HPIP]²⁺. The resultant heterometallic complex binds to DNA via intercalation of HPIP into the DNA base pairs and its DNA-binding ability is stronger than [Ru(bpy)₂HPIP]²⁺ itself. The DNA bound [Ru(bpy)₂HPIP]²⁺ cannot bind Cu²⁺ at low Cu²⁺ concentration and the intramolecular hydrogen bond in HPIP is located inside the DNA helix. While the Cu²⁺ concentration is relative high, Cu²⁺ can quench the fluorescence of DNA bound [Ru(bpy)₂HPIP]²⁺. The quenching reason is proposed.     

Facially Dispersed Polyhydride Cu9 and Cu16 Clusters Comprising Apex‐Truncated Supertetrahedral and Square‐Face‐Capped Cuboctahedral Copper Frameworks

By using a linear tetraphosphine, meso‐bis[(diphenylphosphinomethyl)phenylphosphino]methane (dpmppm), nona‐ and hexadecanuclear copper hydride clusters, [Cu₉H₇(μ‐dpmppm)₃]X₂ (X=Cl ( 1 a ), Br ( 1 b ), I ( 1 c ), PF₆ ( 1 d )) and [Cu₁₆H₁₄(μ‐dpmppm)₄]X₂ (X₂=I₂ ( 2 c ), (4/3) PF₆?(2/3) OH ( 2 d )) were synthesized and characterized. They form copper‐hydride cages of apex‐truncated supertetrahedral {Cu₉H₇}²⁺ and square‐face‐capped cuboctahedral {Cu₁₆H₁₄}²⁺ structures. The hydride positions were estimated by DFT calculations to be facially dispersed around the copper frameworks. A kinetically controlled synthesis gave an unsymmetrical Cu₈H₆ cluster, [Cu₈H₆(μ‐dpmppm)₃]²⁺ ( 3 ), which readily reacted with CO₂ to afford linear Cu₄ complexes with formate bridges, leading to an unprecedented hydrogenation of CO₂ into formate catalyzed by {Cu₄(μ‐dpmppm)₂} platform. The results demonstrate that new motifs of copper hydride clusters could be established by the tetraphosphine ligands, and the structures influence their reactivity.     

Tuning the bridging modes of Cu-azido complexes with Schiff bases by varying the terminal groups

Three azido-bridged copper(II) complexes, [Cu₂(L¹)₂(μ_1,1,3-N₃)₂] _n ·2nH₂O (1), [Cu₄(L²)₄(μ_1,1-N₃)₂(μ_1,1,3-N₃)₂] _n (2), and [Cu₂(L³)₂(μ_1,1-N₃)₂] (3), where L¹, L², and L³ are the deprotonated forms of 4-bromo-2-[(2-methylaminoethylimino)methyl]phenol (HL¹), 4-bromo-2-[(2-ethylaminoethylimino)methyl]phenol (HL²), and 4-bromo-2-[(2-isopropylaminoethylimino)methyl]phenol (HL³), respectively, have been prepared and structurally characterized by single-crystal X-ray diffraction analysis and IR spectra. The slight differences in the terminal groups of the Schiff bases lead to different bridging modes of the azido groups.     

Synthesis,structure, and photoluminescence of a (4,6)-connected Cu(I)–CN–triazolate framework built with a unique heptanuclear hybrid cluster

A 3-D Cu(I)–CN–triazolate hybrid coordination polymer, {Cu₉(NH₂-BPT)₂(BPT)₂(CN)₇}_n (1) (NH₂-BPT = 4-amino-3,5-bis(3-pyridyl)-1,2,4-triazole, BPT = 3,5-bis(3-pyridyl)-1,2,4-triazole), has been synthesized via self-assembly of NH₂-BPT, CuCN, and K₃Fe(CN)₆ under hydrothermal conditions. Single-crystal X-ray diffraction data show that four of the five independent copper centers in 1 have a three-coordinated trigonal coordination geometry, and the remaining copper center has a two-coordinated linear geometry. Three Cu ions are linked by one cisoid-BPT and two CN^? to form a 16-membered ring subunit, which is joined by the two-coordinate copper center via the triazole N(4)-position to generate an unprecedented [Cu₇(BPT)₂(CN)₄] hybrid heptanuclear cluster. Each heptanuclear motif is linked to two adjacent [Cu₇] clusters through four CN^? anions, and further to four [Cu–CN–Cu] binuclear clusters through two transoid-NH₂-BPT ligands. Each of these [Cu–CN–Cu] units is linked to four neighboring heptanuclear motifs. The overall geometry is a 3-D (4,6)-connected topological framework with Schläfli symbol of (4^4?×?6²)(4^4?×?6^10?×?8). Compound 1 also exhibits high thermal stability and strong green fluorescence emission at 536?nm in the solid state.     

Facially Dispersed Polyhydride Cu9 and Cu16 Clusters Comprising Apex-Truncated Supertetrahedral and Square-Face-Capped Cuboctahedral Copper Frameworks

By using a linear tetraphosphine, meso-bis[(diphenylphosphinomethyl)phenylphosphino]methane (dpmppm), nona- and hexadecanuclear copper hydride clusters, [Cu₉H₇(μ-dpmppm)₃]X₂ (X=Cl ( 1 a ), Br ( 1 b ), I ( 1 c ), PF₆ ( 1 d )) and [Cu₁₆H₁₄(μ-dpmppm)₄]X₂ (X₂=I₂ ( 2 c ), (4/3) PF₆⋅(2/3) OH ( 2 d )) were synthesized and characterized. They form copper-hydride cages of apex-truncated supertetrahedral {Cu₉H₇}²⁺ and square-face-capped cuboctahedral {Cu₁₆H₁₄}²⁺ structures. The hydride positions were estimated by DFT calculations to be facially dispersed around the copper frameworks. A kinetically controlled synthesis gave an unsymmetrical Cu₈H₆ cluster, [Cu₈H₆(μ-dpmppm)₃]²⁺ ( 3 ), which readily reacted with CO₂ to afford linear Cu₄ complexes with formate bridges, leading to an unprecedented hydrogenation of CO₂ into formate catalyzed by {Cu₄(μ-dpmppm)₂} platform. The results demonstrate that new motifs of copper hydride clusters could be established by the tetraphosphine ligands, and the structures influence their reactivity.     

The structure of a potassium-copper complex with six-membered macrocyclic ethylsiloxanolate ligands

The structure of K₂{[EtSiO₂]₆K₂Cu₄[O₂SiEt]₆} · 4n-BuOH, a novel mixed sandwich-like complex of K⁺ and Cu²⁺ with two 6-membered macrocyclic ethylsiloxanolate ligands, was established by means of X-ray study. The ligands have an all-cis configuration and a crown conformation. Four Cu²⁺ and two K⁺ ions form a planar hexagon sandwiched between antiparallel coaxial macrocyclic ligands. The K⁺ ions occupy two opposite apices of the hexagon. The Cu²⁺ ions have square-planar coordination with four siloxanolate O_M atoms, while the K⁺ ions, are coordinated with two O atoms of the solvating butanol molecules, in addition to four O_M atoms. The electric neutrality of the whole complex is due to the two outer-sphere K⁺ counter-ions, each located over one of the two siloxanolate macrocycles, i.e., over the «decks» of the sandwich and coordinated with endocyclic siloxane O_Si atoms, as in crown-ether complexes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 752–756, April, 1993.     

Nature et stabilité des complexes métalliques de cryptands dinucléants en solution. III. Le monocycle [22]-Py2N4

Nature and Stability of Some Metallic Complexes of Dinucleating Cryptands in Solution III. The Monocycle [22]-Py₂N₄ The nature and stability of complexes formed by a new 22-membered monocycle L = [22]-Py₂N₄ with the cations Mⁿ⁺ = Cu²⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Ag⁺ have been determined in aqueous solutions (0.01M NaClO₄, 25°) by pH-metry and also, for the copper system, by UV-absorption spectrophotometry. The stepwise protonation constants of the four amine functions of L were 9.1, 8.3, 7.1 and 3.7 logarithms units, respectively. No evidence was found for the protonation of the two pyridine nitrogen atoms. Mononuclear complexes MLⁿ⁺ were identified in all systems investigated, but the dinuclear species M₂L²ⁿ⁺ were only found with Cu²⁺ and Ag⁺. The logarithms of the overall stability constants for the copper and silver complexes are CuL²⁺, 12.9; Cu₂L⁴⁺, 18.6; Agl⁺, 6.3; Ag₂L²⁺, 10.9, respectively. Mononuclear hydroxy species MLOH^(n?1)+ were identified in all systems except those of copper and silver. No dinuclear hydroxy complexes were detected. The complexing properties of L are compared to those of the large and less rigid bis-dien.     

Coinage Metal Complexes of a Tellurium Diimide: cis→trans Isomerization and Metal–Metal Interactions

The different coordination behavior of the ligand tBuN=Te(μ-NtBu)₂Te=NtBu (L) towards Cu⁺ and Ag⁺ results from a cis→trans isomerization. The two Cu⁺ ions in [Cu₂L₃]²⁺ (shown schematically) bridge trans and cis isomers of the ligand, whereas the Ag⁺ ions in [Ag₂L₂]²⁺ link two trans ligands and exhibit a weak Ag⋅⋅⋅Ag interaction.     

Kinetics and mechanism of solvent extraction of copper with kelex 100 in presence of nitrilotriacetic acid

A detailed study of the extraction kinetic behavior of copper(II) in aqueous media containing nitrilotriacetic acid (H₃Y) into chloroform solutions of Kelex 100, a high-molecular-weight alkylated 8-quinolinol, is described. The rate expression for the extraction of copper by Kelex 100, described by the expression —d[Cu²⁺]/dt = k' [Cu²⁺][HL]_o/ [HY^2-]^0.5, supports a mechanism in which the rate-determining steps are the concurrent reactions of Cu²⁺ and CuY^- with a neutral Kelex 100 molecule in the aqueous phase.     

Decomposition of chemically activated ethyltrimethylgermane the arrhenius A-factors for rupture of group IVA—methyl bonds

The decomposition rate of chemically activated ethyltrimethylgermane from the reaction ¹CH₂ + (CH₃)₄Ge, where ¹CH₂ was produced from diazomethane photolysis at 3660 Å, is 8.6 × 10⁵ sec^?1. This result combined with RRKM theory and critical energy estimates yields an Arrhenius A factor of log[A (sec^?1)/methyl] = 14.7 ± 0.8 for methyl rupture from germanium. Log A values for methyl rupture from carbon, silicon, and germanium linearly correlate with the vibrational-rotational entropies of the corresponding tetramethyls. Extrapolation predicts log[A (sec^?1)/methyl] = 14.4 and 14.3 for methyl rupture from tin and lead, respectively.     

Novel Copper(I) Clusters with 2‐(Diphenylphosphanyl)anilide Ligands. Synthesis and Crystal Structures of [Cu6X2(NHR)4] (X = Cl,Br, I; R = C6H4‐2‐PPh2)

Treatment of copper(I) halides CuX (X = Cl, Br, I) with lithium 2‐(diphenylphosphanyl)anilide [Li(HL)] in THF led to the formation of hexanuclear copper(I) complexes [Cu₆X₂(HL)₄] [X = Cl ( 1 ), Br ( 2 ), I ( 3 )]. In compounds 1 – 3 , the copper atoms are in a distorted octahedral arrangement and the amide ligands adopt a μ₃‐κP,κ²N bridging mode. Additionally there are two μ₂‐bridging halide ligands. Each of the [Cu₆X₂(HL)₄] clusters comprises two copper atoms, which are surrounded by two amide nitrogen atoms in an almost linear coordination [Cu–N: 186.2(3)–188.0(3) pm] and four copper atoms, which are connected to an amide N atom, a P atom, and a halogen atom in a distorted trigonal planar fashion [Cu–N: 199.6(3)–202.3(3) pm)].