(MCM-41)-La_2O_3纳米复合材料的制备、表征及光学性质

借助水热法,以正硅酸乙酯为硅源,十六烷基三甲基溴化铵为模板剂,在碱性条件下制备了纳米MCM-41分子筛。通过固相热扩散法将La2O3组装到MCM-41介孔孔道中,制备出含La2O3不同浓度的(MCM-41)-La2O3主-客体纳米复合材料。采用化学分析、粉末XRD、FTIR、77K低温N2吸附-解吸附、固体扩散漫反射吸收光谱、拉曼光谱、扫描电镜和发光光谱对主-客体复合材料进行表征。粉末XRD结果表明,La2O3组装到MCM-41分子筛的孔道后并未破坏分子筛骨架,在所制备的(MCM-41)-La2O3主-客体纳米复合材料中MCM-41骨架结构仍然具有较高的有序性,并且,随着植入客体材料浓度的增加复合材料的有序度有所降低。红外光谱表明所制备的纳米复合材料主体分子筛骨架完好;低温氮气吸附-解吸附技术表明La2O3已经部分地占据了MCM-41分子筛孔道,导致分子筛的比表面积和孔体积都有所降低;固体扩散漫反射吸收光谱表明吸收光谱的吸收峰发生了蓝移现象,并表现出量子限域效应,说明La2O3已经组装到了MCM-41分子筛的孔道中;拉曼光谱表明所制备的复合材料没有出现新的特征峰,表明La2O3已经组装到了MCM-41分子筛的孔道中;扫描电镜表明(MCM-41)-La2O3样品的外观非常规整,主要呈现的是球状结构,La2O3含量为10%时,(MCM-41)-La2O3的平均粒径为(114±10)nm。发光光谱研究结果表明,所制备的复合材料(MCM-41)-La2O3样品在396nm处具有较好的发光性质,因而具有作为发光材料潜在应用前景。     

稀土超分子纳米功能材料的组装及其荧光性质比较

本文在无水乙醇中制备了铕的四元、三元和二元系列配合物,当配体Phen和TTA共存时,协同发光效应使得Eu(Phen)2(TTA)2的荧光最强,在铕配合物和纳米级介孔分子筛MCM－41或（CH3）3Si-MCM-41组成的超分子发光体系中,主体分子筛的疏水孔道环境有利于客体铕配合物的发展,说明主客体之间的相互作用会对复合的超分子发光材料的荧光性质产生影响。     

Preparation, characterization and optical properties of lanthanum-(nanometer MCM-41) composite material

Nanometer MCM-41 molecular sieve was prepared under a base condition by using cetyltrimethylammonium bromide as template and tetraethyl orthosilicate as silica source by means of hydrothermal method. Lanthanum(III) was incorporated into the nanometer MCM-41 by a liquid phase grafting method. The prepared nanocomposite materials were characterized by means of powder X-ray diffraction, spectrophotometric anaylsis, Fourier transform infrared spectroscopy, low temperature nitrogen adsorption-desorption technique, solid diffuse reflectance absorption spectra and luminescence. The powder X-ray diffraction studies show that the nanometer MCM-41 molecular sieve is successfully prepared. The highly ordered mesoporous two-dimensional hexagonal channel structure and framework of the support MCM-41 is retained intact in the prepared composite material La-(nanometer MCM-41). The spectrophotometric anaylsis indicates that lanthanum exists in the prepared nanocomposite materials. The Fourier transform infrared spectra indicate that the framework of the MCM-41 molecular sieve still remains in the prepared nanocomposite materials and some framework vibration peaks show blue shifts relative to those of the MCM-41 molecular sieve. The low temperature nitrogen adsorption-desorption indicates that the guest locates in the channel of the molecular sieve. Compared with bulk lanthanum oxide, the guest in the channel of the molecular sieve has smaller particle size and shows a significant blue shift of optical absorption band in solid diffuse reflectance absorption spectra. The observed blue shift in the solid state diffuse reflectance absorption spectra of the lanthanum-(nanometer MCM-41) sample show the obvious stereoscopic confinement effect of the channel of the host on the guest, which further indicates the successful encapsulation of the guest in the host. The La-(nanometer MCM-41) sample shows luminescence.     

Preparation and Optical Properties of (Nanometer MCM-41)-CdS Composite Materials

The nanometer and micrometer molecular sieves MCM-41 were prepared by a hydrothermal method. Cadmium (II) was exchanged into the molecular sieves by ion-exchange, and thioacetamide was then used as a precursor of hydrogen sulfide for sulphidizing the (MCM-41)-cadmium samples to prepare the host-guest composite materials (MCM-41)-CdS. By means of chemical analysis, powder X-ray diffraction, infrared spectroscopy, low temperature nitrogen adsorption-desorption technique, solid state diffuse reflectance absorption spectroscopy and luminescence, the prepared materials were characterized. The chemical analysis shows that the guest is successfully trapped in the molecular sieves. The powder X-ray diffraction suggests that the frameworks of the molecular sieves in the prepared host-guest composite materials are retained during the preparative process. They are intact and the degrees of crystallinity are still very high. The infrared spectra show that the frameworks of the prepared host-guest materials keep intact. The low temperature nitrogen adsorption-desorption studies indicate that the pore volumes, the pore sizes and the surface areas of the prepared composite materials decrease relative to those of the MCM-41 molecular sieve hosts. This shows that the guests are successfully encapsulated in the channels of the molecular sieves. The solid state diffuse reflectance absorption spectra of the prepared host-guest composites show some blue-shifts relative to that of bulk cadmium sulfide, indicating that the guests are trapped in the channels of the molecular sieves. This shows the obvious stereoscopic confinement effect of the molecular sieve host on the nanometer cadmium sulfide guest. The (nanometer MCM-41)-CdS and (micrometer MCM-41)-CdS samples show obvious luminescence.     

Catalytic Performance of Spherical MCM-41 Modified with Copper and Iron as Catalysts of NH3-SCR Process

Spherical MCM-41 with various copper and iron loadings was prepared by surfactant directed co-condensation method. The obtained samples were characterized with respect to their structure (X-ray diffraction, XRD), texture (N₂ sorption), morphology (scanning electron microscopy, SEM), chemical composition (inductively coupled plasma optical emission spectrometry, ICP-OES), surface acidity (temperature programmed desorption of ammonia, NH₃-TPD), form, and aggregation of iron and copper species (diffuse reflectance UV-Vis spectroscopy, UV-Vis DRS) as well as their reducibility (temperature programmed reduction with hydrogen, H₂-TPR). The spherical MCM-41 samples modified with transition metals were tested as catalysts of selective catalytic reduction of NO with ammonia (NH₃-SCR). Copper containing catalysts presented high catalytic activity at low-temperature NH₃-SCR with a very high selectivity to nitrogen, which is desired reaction products. Similar results were obtained for iron containing catalysts, however in this case the loadings and forms of iron incorporated into silica samples very strongly influenced catalytic performance of the studied samples. The efficiency of the NH₃-SCR process at higher temperatures was significantly limited by the side reaction of direct ammonia oxidation. The reactivity of ammonia molecules chemisorbed on the catalysts surface in NO reduction (NH₃-SCR) and their selective oxidation (NH₃-SCO) was verified by temperature-programmed surface reactions.     

Synthesis, characterization and optical properties of silver and gold nanowires embedded in mesoporous MCM-41

Uniform nanowires of silver and gold inside the channels of MCM-41 were prepared by controlled reduction of their respective metal salts with sodium borohydride (NaBH₄). Presence of nanowires of silver and gold in MCM-41 were confirmed by high angle X-ray diffraction (XRD) data (peaks between 2ϑ = 30 − 60°) and transmission electron microscopy (TEM) confirmed the diameter of the nanowires. Diameter of nanowires is found to be ∼ 2.8 nm which is coincident with channel diameter of MCM-41. Optical properties of these heterostructured materials Ag-MCM-41 and Au-MCM-41 reveals the presence of surface plasmon absorption peaks of silver and gold respectively, and the shift in the absorption bands are associated to agglomeration of clusters inside the channels. Room temperature photoluminescence spectra exhibits interesting optical properties as observed for direct band gap semiconductors. Non-linear optical properties (NLO) corresponding to second harmonic generation (SHG) values were also recorded for self supported films of these heterostructured materials. Enhanced optical non-linearity was found to be arising from a corresponding increase of local field near the surface plasmon resonance. Further enhancement in SHG was found with poling due to an induction of orientation order.     

Gold-vanadium-niobium catalysts in environmental protection—adsorption and interaction of NO, C3H6 and O2—FT-IR study

FT-IR study of NO and C₃H₆ adsorption, co-adsorption and interaction in the presence of oxygen were performed in order to estimate the catalytic behaviour of Au and V-containing MCM-41 materials in NO-SCR with propene. MCM-41 were modified with gold, vanadium and niobium by their introduction during the synthesis (co-precipitation) carried out with the use of HCl or H₂SO₄ as pH adjustment agent. The texture/structure properties of the prepared samples were investigated by N₂ adsorption, XRD, XPS and TEM techniques. It has been found that the nature of acid used for the pH adjustment during the synthesis determines the gold particles size and dispersion and influences the interaction of NO+O₂+C₃H₆ with the catalyst surfaces. In both types of AuVMCM-41 catalysts, the SCR reaction route occurs via NO₂ formation. In the case of AuVMCM-41(HCl) and AuVNbMCM-41(HCl) nitrites are formed and stored, and upon heating NO₂ is released. These kinds of nitrites are not formed on AuVMCM-41(H₂SO₄) and AuVNbMCM-41(H₂SO₄). Instead of that NO₂ is chemisorbed on metallic gold, niobium and vanadium species and reacts with propene and/or oxygenates.     

MCM-41分子筛的合成及129Xe核磁共振的研究

Purely siliceous MCM-41 with a narrow pore-size distribution, different pore size, high surface area was synthesized . As prepared, calcined and catalytically tested MCM-41 materials have been comprehensively characterized by N₂ adsorption/desorption at 77K and ¹²⁹Xe NMR. By adding mesitylene during the synthesis, the pore size of MCM-41 was enlarged to 5.2nm. The chemical shift in ¹²⁹Xe NMR spectroscopy of adsorbed xenon indicates that the MCM-41 is one dimensional pore channels .     

Spherical Al-MCM-41 Doped with Copper by Modified TIE Method as Effective Catalyst for Low-Temperature NH3-SCR

Aluminum containing silica spherical MCM-41 was synthesized and modified with copper by the template ion-exchange method (TIE) and its modified version, including treatment of the samples with ammonia solution directly after template ion-exchange (TIE-NH₃). The obtained samples were characterized with respect to their chemical composition (ICP-OES), structure (XRD), texture (low temperature N₂ sorption), morphology (SEM-EDS), form and aggregation of deposited copper species (UV-vis DRS), reducibility of copper species (H₂-TPR), and surface acidity (NH₃-TPD). The deposition of copper by the TIE-NH₃ method resulted in much better dispersion of this metal on the MCM-41 surface comparing to copper introduced by TIE method. It was shown that such highly dispersed copper species, mainly monomeric Cu²⁺ cations, deposited on aluminum containing silica spheres of MCM-41, are significantly more catalytically effective in the NH₃-SCR process than analogous catalysts containing aggregated copper oxide species. The catalysts obtained by the TIE-NH₃ method effectively operated in much broader temperature and were less active in the side process of direct ammonia oxidation by oxygen.     

不同结构颗粒对PMMA基复合材料性能影响

采用原位本体聚合法制备PMMA/MCM-41(with template),PMMA/SBA-15(with template),PMMA/SiO2三种复合材料.研究了介孔分子筛MCM-41,SBA-15和SiO2对PMMA复合材料拉伸强度,冲击强度,热稳定性的影响.由于合成介孔分子筛MCM-41,SBA-15时所用的模板剂CTAB和P123分布于孔口处和颗粒表面上,分别与PMMA基体产生物理缠结作用,增加了两者的相容性;且P123(EO20PO70EO20)表面有较大的PO/EO比率,与小分子量的CTAB相比有较强的疏水性,使得PMMA/SBA-15(with template)复合材料的性能要优于PMMA/MCM-41(with template).     

MCM-41-anchored sulfonic acid (MCM-41-SO3H): An efficient heterogeneous catalyst for green organic synthesis

MCM-41-anchored sulfonic acid (MCM-41-SO₃H) used as a solid acid catalyst has been reported in recent years for various synthetic protocols. The superior advantage of MCM-41-SO₃H is that it can be recovered and reused several times without loss of its efficiency. In this tutorial review, we attempt to give an overview of the use of MCM-41-SO₃H as a solid and heterogeneous catalyst in the synthesis of various organic compounds that have industrial and pharmaceutical applications.     

MCM-41 anchored sulfonic acid （MCM-41-R-SO3H）： A mild,reusable and highly efficient heterogeneous catalyst for the Biginelli reaction

An efficient three-component synthesis of 3,4-dihydropyrimidinones using MCM-41 anchored sulfonic acid （MCM-41-R-SO3H） as a mild, heterogeneous catalyst for Biginelli reaction in CH3CN under reflux condition is described.     

Effect of pore expansion and amine functionalization of mesoporous silica on CO2 adsorption over a wide range of conditions

Adsorption of CO₂ was investigated over a wide range of conditions on a series of mesoporous silica adsorbents comprised of conventional MCM-41, pore-expanded MCM-41 silica (PE-MCM-41) and triamine surface-modified PE-MCM-41 (TRI-PE-MCM-41). The isosteric heat of adsorption, calculated from adsorption isotherms at different temperatures (298–328 K), showed a significant increase in CO₂–adsorbent interaction after amine functionnalization of PE-MCM-41, consistent with the high CO₂ uptake in the very low range of CO₂ concentration. The CO₂ adsorption isotherm and kinetics data showed the high potential of TRI-PE-MCM-41 material for CO₂ removal in gas purification and separation applications. With TRI-PE-MCM-41, the CO₂ selectivity over N₂ was drastically improved over a wide range of conditions compared to pure mesoporous silica. Moreover, the adsorption was reversible and fast, and the adsorbent was thermally stable and tolerant to moisture.     

The composite material of perylene bisimide dye in MCM-41 and its photophysical and photochemical properties

The mesoporous material MCM-41 was synthesized by a hydrothermal method, and perylene bisimide dye was incorporated into its channels by impregnation. The absorption, FTIR, fluorescence emission, and decay spectra of perylene bisimide dye in CHCl₃ and in MCM-41 were studied to investigate the effect of the one-dimensional channel of MCM-41 on the photophysical and photochemical properties of the dye. The results indicated that the nanochannels of MCM-41 shifted the absorption and emission maxima to red and broadened the spectra, with loss of vibrational structure. The fluorescence decay curves fitted a double-exponential function and the lifetime of perylene bisimide dye in MCM-41 was prolonged. The huge surface area of the mesoporous molecular sieve MCM-41 prevented aggregation of dye molecules, which can thus be used at high concentration.     

纳米MCM-41组装DBC-偶氮胂的研究

以纳米MCM-41孔道为模版,组装制备了二溴对氯偶氮胂(DBC-ASA)纳米簇合物。采用化学分析、粉末X-射线衍射、77 K N2吸附-解吸附、红外光谱、固体扩散漫反射光谱及发光光谱表征了制备的(MCM-41)-(DBC-ASA)主-客体纳米复合材料。结果表明,DBC-ASA成功地组装在了主体MCM-41中,并且处于主体分子筛材料的纳米孔道中。(MCM-41)-(DBC-ASA)纳米复合材料具有作为发光材料的应用前景。     

EuPO4:Zn@MCM-41的制备和发光性质

通过微波辅助水热法合成MCM-41介孔材料,经溶胶凝胶组装过程将EuPO4:Zn分散到MCM-41表面上和孔道中,制备成以MCM-41为基质的复合发光材料EuPO4:Zn@MCM-41粉末.通过XRD、FTIR、氮吸附、SEM、HRTEM、EDS对该材料进行了表征,用单因素法探究了原料配比(Eu(NO3)3、Zn(NO3)2的加入量和反应条件(煅烧的温度、时间)对EuPO4:Zn@MCM-41在593 am处发光强度的影响,并研究其影响机理.荧光分析发现,EuPO4:Zn基本不发射荧光,而EuPO4:Zn@MCM-41材料具有蓝光段和红光段的荧光发射,主要发光带以468和593 nm为中心.593 nm处的发射归因于Eu3+的4f组内5D0→7F1跃迁,即Eu3+中心离子所在品格格位对称性决定的磁偶极跃迁.研究表明以MCM-41为载体,能够大大降低颗粒的团聚程度,并使EuPO4:Zn颗粒具有更小的粒径:同时EuPO4:Zn@MCM-41中Eu3+发光巾心具有更大的裂分,MCM-41的纳米孔道使Eu3+的发光中心分离,降低了Eu3+之间电子云之间的重叠,大大减小了荧光的猝灭,因此MCM-41能有效降低Eu3+复合物荧光猝灭.     

The preparation and characterization of La doped TiO2 nanoparticles and their photocatalytic activity

In this paper, pure and La doped TiO₂ nanoparticles with different La content were prepared by a sol-gel process using Ti (OC₄H₉)₄ as raw material, and also were characterized by XRD, TG-DTA, TEM, XPS, DRS and Photoluminescence (PL) spectra. We mainly investigated the effects of calcining temperature and La content on the properties and the photocatalytic activity for degrading phenol of as-prepared TiO₂ samples, and also discussed the relationships between PL spectra and photocatalytic activity as well as the mechanisms of La doping on TiO₂ phase transformation. The results showed that La³⁺ did not enter into the crystal lattices of TiO₂ and was uniformly dispersed onto TiO₂ as the form of La₂O₃ particles with small size, which possibly made La dopant have a great inhibition on TiO₂ phase transformation; La dopant did not give rise to a new PL signal, but it could improve the intensity of PL spectra with a appropriate La content, which was possibly attributed to the increase in the content of surface oxygen vacancies and defects after doping La; La doped TiO₂ nanoparticles calcined at 600°C exhibited higher photocatalytic activity, indicating that 600°C was an appropriate calcination temperature. The order of photocatalytic activity of La doped TiO₂ samples with different La content was as following: 1>1.5>3>0.5>5>0 mol%, which was the same as the order of their PL intensity, namely, the stronger the PL intensity, the higher the photocatalytic activity, demonstrating that there were certain relationships between PL spectra and photocatalytic activity. This could be explained by the points that PL spectra mainly resulted from surface oxygen vacancies and defects during the process of PL, while surface oxygen vacancies and defects could be favorable in capturing the photoinduced electrons during the process of photocatalytic reactions.     

Photoluminescence properties of BaMoO4 amorphous thin films

BaMoO₄ amorphous and crystalline thin films were prepared from polymeric precursors. The BaMoO₄ was deposited onto Si wafers by means of the spinning technique. The structure and optical properties of the resulting films were characterized by FTIR reflectance spectra, X-ray diffraction (XRD), atomic force microscopy (AFM) and optical reflectance. The bond Mo-O present in BaMoO₄ was confirmed by FTIR reflectance spectra. XRD characterization showed that thin films heat-treated at 600 and 200 °C presented the scheelite-type crystalline phase and amorphous, respectively. AFM analyses showed a considerable variation in surface morphology by comparing samples heat-treated at 200 and 600 °C. The reflectivity spectra showed two bands, positioned at 3.38 and 4.37 eV that were attributed to the excitonic state of Ba²⁺ and electronic transitions within MoO²⁻₄, respectively. The optical band gaps of BaMoO₄ were 3.38 and 2.19 eV, for crystalline (600 °C/2 h) and amorphous (200 °C/8 h) films, respectively. The room-temperature luminescence spectra revealed an intense single-emission band in the visible region. The PL intensity of these materials was increased upon heat-treatment. The excellent optical properties observed for BaMoO₄ amorphous thin films suggested that this material is a highly promising candidate for photoluminescent applications.     

Hydrothermal synthesis, characterization, and photocatalytic properties of Zn2SnO4

Nanosized Zn₂SnO₄ (ZTO) particles were successfully synthesized by a simple hydrothermal process in water/ethylene glycol mixed solution using amines (ethylamine, n-butylamine, n-hexylamine, and n-octylamine) as mineralizer. The products were characterized by X-ray diffractions (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N₂ adsorption. The results indicated that the hydrothermal conditions, such as alkaline concentration (n-butylamine), reaction temperature, solvent composition, and the kind of amines, had an important influence on the composition, crystallinity, and morphology of the product. The as-synthesized ZTO samples exhibited high activities and durabilities for photodegradation of methyl orange and the activities were mainly affected by the crystallinities of the samples. A hexagonal-shaped ZTO (H-ZTO) sample was prepared in 0.53 M of n-butylamine solution at 180 °C for 20 h and its optical properties were characterized by UV-Vis diffuse reflectance and Photoluminescence (PL) spectra. Furthermore, the photocatalytic H₂ evolution reaction from ethanol aqueous solution over H-ZTO was also investigated.     

YF3:Tb,LaF3:Ce/Tb,and GdF3:Tb nanoparticles: A comparison of the crystallographic and photoluminescent properties

YF₃:Tb, LaF₃:Ce/Tb, and GdF₃:Tb nanoparticles (NPs) were synthesized by the thermal co-precipitation technique at a lower temperature. X-ray diffraction (XRD) analysis, thermogravimetric analysis (TGA), Fourier transform infrared (FTIR), FT-Raman, UV/visible, and photoluminescence techniques were utilized to determine the phase purity, crystal phase, thermal stability, exterior behavior, optical properties, colloidal stability, and luminescent properties. The XRD results showed the different crystal phases in each nanoproduct. The TGA studies exhibited slight degradation at a lower temperature, which suggests surface water adsorption and organic moieties. The FTIR spectra revealed the existence of the IR bands related to hydroxyl and (C O) groups, suggesting the presence of organic moieties. The absorption spectra and optical bandgap energies were measured in aqueous media for the determination of the colloidal dispersibility in an aqueous solution. The excitation and emission spectra were analyzed, and all observed excitation and emission transitions were labeled. The emission spectra of the LnF₃:Tb NPs exhibited distinctive features of the most dominant emission transition located at 543 (⁵D₄ → ⁷F₅) under the excitation at 368 nm. Among the presented LnF₃ host matrices, YF₃:Tb NPs demonstrated high crystallinity along with superior photoluminescence properties. These findings are highly useful in the conjugation of biomolecules for sensitive detection of biomolecules and optical bioimaging.