Facile synthesis of meso-substituted dipyrromethanes and porphyrins using cation exchange resins

The macroporosity and acidity of cation exchange resins play a crucial role in the synthesis of dipyrromethanes and porphyrins; for the first time, cation exchange resins have been used as heterogeneous solid acid catalysts to produce dipyrromethanes and porphyrins in good yields. The reaction, at room temperature, of substituted aromatic aldehydes with pyrrole catalysed by cation exchange resin afforded the corresponding meso-substituted dipyrromethane in yields ranging from 70 to 80%, indicating the broad scope of the reaction. Further, the condensation of meso-substituted dipyrromethane with similar or different substituted aromatic aldehydes, using cation exchange resins furnished meso-tetrakis-symmetrical and mixed porphyrins, respectively. One-pot synthesis of porphyrins can also be carried out directly from the aldehydes and pyrrole under the above conditions. Acidolysis of the dipyrromethane is negligible under the conditions of the porphyrin-forming reaction.     

Efficient proline and prolinol ether mediated 3-component synthesis of 3- and 3,4-substituted chromenone derivatives

A highly efficient route for the synthesis of valuable 3,4-substituted chromenone derivatives by the reaction of 1,3-diketones with aldehydes in the presence of l-proline was developed. The reactions take advantage of readily available starting materials and follow a Knoevenagel condensation/Michael addition/hemiacetalization domino process. Chiral 3-substituted chromenones are obtained with high enantioselectivities when a chiral diarylprolinol TMS-ether is applied in the reaction.     

Efficient synthesis of meso-substituted corroles in a H2O-MeOH mixture

New and efficient conditions for the synthesis of meso-substituted corroles were developed. The first step, involving the reaction of aldehydes with pyrrole, was carried out in a water-methanol mixture in the presence of HCl. A relatively narrow distribution of aldehyde-pyrrole oligocondensates was obtained through careful control of their solubility in the reaction medium. After thorough optimization of various reaction parameters (cosolvent, reagent, and acid concentration), high yields of bilanes were obtained. Additionally, the bilane derived from 4-cyanobenzaldehyde was isolated, and the oxidative macrocyclization reaction was performed under various reaction conditions (different solvents, different concentrations, and various oxidants). As a result, triphenylcorrole was obtained in the highest yield (32%) reported to date. The scope and limitations studied showed that this method was particularly efficient for moderately reactive aldehydes and those bearing electron-donating groups (yields 14-27%). Using these conditions, corroles bearing strongly electron-donating groups were obtained for the first time. In addition, it was found that the reaction of unhindered dipyrromethanes with aldehydes under analogous conditions afforded trans-A2B-corroles in very high yields (45-56%; 8-fold higher than previously reported) without scrambling. The fact that scrambling was not observed in this reaction despite a very high HCl concentration (0.3 M) is unprecedented. Detailed studies on the oxidation of bilane, derived from sterically hindered dipyrromethane, allowed us to unequivocally establish that the yield of macrocyclization is insensitive to the concentration. It was found the 1H NMR spectra of corroles in deuterated TFA gave very sharp signals.     

Henry reaction catalyzed by copper(I) complexes of a new pyridine‐containing macrocyclic ligand

The synthesis and characterization of copper(I) complexes of the novel pyridine‐containing macrocyclic ligand (PC‐L) and their use as catalysts in the Henry reaction are reported. The pyridine‐based 12‐membered tetraaza macrocyclic (PC‐L) ligand 1 can be obtained in good overall yield (85%) from commercially available starting materials. The Cu(I) complexes showed good catalytic activities in the Henry reaction of different aldehydes and nitroalkanes. Remarkable diastereoselectivity was observed when isatine was reacted with nitroethane under catalytic conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

Rational syntheses of porphyrins bearing up to four different meso substituents

Porphyrins bearing specific patterns of substituents are crucial building blocks in biomimetic and materials chemistry. We have developed methodology that avoids statistical reactions, employs minimal chromatography, and affords up to gram quantities of regioisomerically pure porphyrins bearing predesignated patterns of up to four different meso substituents. The methodology is based upon the availability of multigram quantities of dipyrromethanes. A procedure for the diacylation of dipyrromethanes using EtMgBr and an acid chloride has been refined. A new procedure for the preparation of unsymmetrical diacyl dipyrromethanes has been developed that involves (1) monoacylation with EtMgBr and a pyridyl benzothioate followed by (2) introduction of the second acyl unit upon reaction with EtMgBr and an acid chloride. The scope of these acylation methods has been examined by preparing multigram quantities of diacyl dipyrromethanes bearing a variety of substituents. Reduction of the diacyl dipyrromethane to the corresponding dipyrromethane-dicarbinol is achieved with NaBH(4) in methanolic THF. Porphyrin formation involves the acid-catalyzed condensation of a dipyrromethane-dicarbinol and a dipyrromethane followed by oxidation with DDQ. Optimal conditions for the condensation were identified after examining various reaction parameters (solvent, temperature, acid, concentration, time). The conditions identified (2.5 mM reactants in acetonitrile containing 30 mM TFA at room temperature for <7 min) provided reaction without detectable scrambling (LD-MS) for aryl-substituted dipyrromethanes, and trace scrambling for alkyl-substituted dipyrromethanes. The desired porphyrins were obtained in 14-40% yield. The synthesis is compatible with diverse functionalities: amide, aldehyde, carboxylic acid, ester, nitrile, ether, bromo, iodo, ethyne, TMS-ethyne, TIPS-ethyne, perfluoroarene. In total 30 porphyrins of the types A(3)B, trans-A(2)B(2), trans-AB(2)C, cis-A(2)B(2), cis-A(2)BC, and ABCD were prepared, including >1-g quantities of three porphyrins.     

Improved synthesis of meso-aryl-substituted [26]hexaphyrins

[reaction: see text] Acid-catalyzed reactions of 5-(2',3',4',5',6'-pentafluorophenyl)dipyrromethane with aryl aldehydes and of 5-(aryl)dipyrromethanes with 2,3,4,5,6-pentafluorobenzaldehyde allowed the preparation of a variety of meso-aryl [26]hexaphyrins.     

A novel method for the synthesis of dipyrromethanes by metal triflate catalysis

5-Substituted dipyrromethanes were synthesized by the reaction of N-tosyl imines with excess pyrrole in the presence of metal triflates. Tripyrromethane and other oligomeric side products were not observed. High yields of 5-substituted dipyrromethanes were obtained for electron donating and withdrawing substituents by performing the reaction at two different temperatures. The new reaction procedure is simple and anhydrous conditions are not required.     

Stereoselective synthesis of new vicinal diaminoalkyl naphthols by three component Mannich type reaction of α,β-unsaturated aldehydes

The application of the aromatic Mannich reaction to α,β-unsaturated aldehydes, affords a series of new diaminoalkyl naphthols, by a convenient solventless reaction, starting from inexpensive and easily available starting materials. The absolute configurations of the products obtained are attributed on the basis of the coupling constant values of ¹H NMR spectra, joined with the conformational analysis of the molecules by molecular modelling. A mechanistic hypothesis is proposed, which involves an imino–amino intermediate.     

Refined methods for the synthesis of meso-substituted A3- and trans-A2B-corroles

We have refined a one-pot synthesis of A3-corroles via "3 + 4" condensation of an aldehyde with a pyrrole followed by macrocyclization mediated by DDQ. After thorough examination of various reaction parameters (reactivity of an aldehyde, catalyst, solvent, concentration, time etc.) we have elaborated three different sets of conditions for different types of aromatic aldehydes--highly reactive, moderately reactive and sterically hindered. Thanks to the identification of the key factors influencing the yield of bilanes and the yield of their conversion to corroles we were able to improve yields to ca. 17% for highly reactive aldehydes and ca. 13% for moderately reactive aldehydes. Altogether fourteen A3-corroles have been prepared in 7-21% yield. 5,10,15-Trimesitylcorrole has been obtained for the first time. [2 + 1] Condensation between sterically hindered dipyrromethanes and aldehydes has also been refined and yields of trans-A2B-corroles have been improved by ca. 10%.     

Dimethylzinc-mediated, enantioselective synthesis of propargylic amines

A one-pot, enantioselective synthesis of N-aryl propargylic amines, using alkynylation reagents obtained from dimethylzinc and terminal acetylenes in combination with various aldehydes and o-methoxyaniline as starting materials, has been developed. Enantiopure beta-amino alcohols derived from norephedrine were used as non-covalent chiral auxiliaries, both in stoichiometric or substoichiometric amount. After optimization, propargylic amines were obtained in good to high yields (up to 93%) and with moderate to high enantiomeric excesses (up to 97% ee). The possibility to recover the chiral auxiliary after the reaction was demonstrated.     

Highly meso-Diastereoselective Pinacol Coupling of Aromatic Aldehydes Mediated by Al Powder/Copper Sulfate in Water

Pinacol-type coupling reaction products presenting a high meso-diastereoselectivity (the ratio dl/meso was 4/96 up to 1/99) were obtained in fair to good yields (24–69%) using several aromatic aldehydes as starting materials and aluminium powder/copper sulfate as catalysts, in water, under reflux conditions.     

Synthesis of novel indolo[2,3-c]quinolinones via Ugi-4CR/palladium-catalyzed arylation

In this letter, an expedient method was developed for the construction of novel indolo[2,3-c]quinolinone derivatives via palladium-catalyzed arylation of Ugi adducts obtained from the reaction of indole-2-carboxylic acid, various aromatic aldehydes, 2-bromoanilines, and isocyanides. The reaction proceeded efficiently with various starting materials to produce the indoloquinolinone scaffolds in good yields.     

Simple route to meso-substituted trans-A2B2-porphyrins bearing pyridyl units

We have developed a methodology that affords regioisomerically pure trans-A₂B₂-porphyrins bearing pyridyl substituents. The optimal conditions for their synthesis were identified by the modification of known conditions for the reaction of dipyrromethanes with aromatic aldehydes. A total of five new porphyrins were synthesized.     

Synthesis of 5,15-diaryltetrabenzoporphyrins

A general method of synthesis of 5,15-diaryltetrabenzoporphyrins (Ar 2TBPs) has been developed, based on 2 + 2 condensation of dipyrromethanes followed by oxidative aromatization. Two pathways to Ar 2TBPs were investigated: the tetrahydroisoindole pathway and the dihydroisoindole pathway. In the tetrahydroisoindole pathway, precursor 5,15-diaryltetracyclohexenoporphyrins (5,15-Ar 2TCHPs) were assembled from cyclohexeno-fused meso-unsubstituted dipyrromethanes and aromatic aldehydes or, alternatively, by way of the classical MacDonald synthesis. In the first case, scrambling was observed. Aromatization by tetracyclone was more effective than aromatization by DDQ but failed in the cases of porphyrins with electron-withdrawing substituents in the meso-aryl rings. The dihydroisoindole pathway was found to be much superior to the tetrahydroisoindole pathway, and it was developed into a general preparative method, consisting of (1) the synthesis of 4,7-dihydroisoindole and its transformation into meso-unsubstituted dipyrromethanes, (2) the synthesis of 5,15-diaryloctahydrotetrabenzoporphyrins (5,15-Ar 2OHTBPs), and (3) their subsequent aromatization by DDQ. Ar 2TBP free bases exhibit optical absorption spectra similar to those of meso-unsubstituted tetrabenzoporphyrins and fluoresce with high quantum yields. Pd complex of Ph 2TBP was found to be highly phosphorescent at room temperature.     

A versatile method for the synthesis of substituted 1-aminohydantoin derivatives

An efficient and versatile method has been developed for the synthesis of 1-aminohydantoin derivatives which can be substituted at all the possible positions of the hydantoin ring. The starting materials are aldehydes, ketones, carboxylic acids and hydrazides as well as isocyanates readily available from commercial sources. The semicarbazide-type reaction product of an N-acyl-N′-(1-cyanoalkyl)hydrazine, obtained from the above materials by methods known from the literature, and an isocyanate is cyclized in the presence of a basic catalyst to yield 1-acylamino-4-imino-2-oxoimidazolidine derivatives whose acid catalyzed hydrolysis leads to 1-aminohydantoin derivatives in good to excellent yields. The last two steps are carried out in a single reaction medium.     

A facile and mild method for the synthesis of terminal bromofluoroolefins via diethylzinc-promoted Wittig reaction

[reaction: see text] Synthesis of 1-bromo-1-fluoroolefins was achieved in good yields via a Wittig reaction promoted by diethylzinc, even with nonactivated aldehydes and ketones as starting materials.     

Ionic Liquids as Precatalysts in the Highly Stereoselective Conjugate Addition of α,β‐Unsaturated Aldehydes to Chalcones

Imidazolium‐based ionic liquids (ILs) serve both as recyclable reaction media and as precatalysts for the N‐heterocyclic carbene‐catalyzed conjugate addition of α,β‐unsaturated aldehydes to chalcones. The reaction produces a broad scope of 1,6‐ketoesters incorporating an anti‐diphenyl moiety in high yields and with high stereoselectivity. In recycling experiments, the IL can be reused up to five times with retained reactivity and selectivity. Moreover, the 1,6‐ketoesters form self‐assembled organogels in aliphatic hydrocarbons. The reaction protocol is robust, easily operated, scalable and highly functionalized compounds can be obtained from inexpensive and readily accessible starting materials.     

Synthesis of new chiral aliphatic amino diselenides and their application as catalysts for the enantioselective addition of diethylzinc to aldehydes

[reaction: see text] A set of chiral aliphatic amino diselenides have been synthesized from readily available starting materials in a straightforward synthetic route via the ring-opening reaction of the parent aziridines. These ligands have been tested as catalysts for the enantioselective addition of diethylzinc to aldehydes. The influence of the alkyl group substituents on the stereoselectivity has been studied, and in the best case, an enantiomeric excess up to 99% could be obtained by using only 0.5 mol % of the chiral diselenide 3a.     

Synthesis of 1,4-dihydropyridine esters using low-melting sugar mixtures as green solvents

Several low-melting sugar mixtures (LMMs) were synthesized and used for preparation of 1,4-dihydropyridines with aldehydes, 1,3-dicarbonyl compounds, and a nitrogen source as starting materials. Good yields, low reaction times, recyclability of LMMs, and catalyst-free methodology are some of the highlights of this new protocol.     

Organocatalytic enantioselective synthesis of highly functionalized polysubstituted pyrrolidines

The organocatalytic conjugate addition of different aldehydes to beta-nitroacrolein dimethyl acetal, generating the corresponding highly functionalized nitroaldehydes in high yields and with high stereoselectivities, has been studied in detail. These transformations have been achieved by using both readily available starting materials in a 1:1 ratio as well as commercially available catalysts at a 10 mol % catalyst loading. Furthermore, a very short and efficient protocol has been devised for the preparation of highly enantioenriched pyrrolidines containing two or three contiguous stereocenters starting from the obtained Michael adducts. 3,4-Disubstituted pyrrolidines have been obtained in a single step by Zn-mediated chemoselective reduction of the nitro group followed by intramolecular reductive amination, and trisubstituted homoproline derivatives have been prepared by means of an olefination reaction and a cascade process involving chemoselective reduction of the nitro group followed by a fully diastereoselective intramolecular aza- Michael reaction.