Synthesis and morphological characterization of miktoarm star copolymers (PCL)2(PS)2 of poly(ε‐caprolactone) and polystyrene

An heterofunctional initiator combining two reactive sites for ring opening polymerization and two for atom transfer radical polymerization was used to prepare three A₂B₂ miktoarm star copolymers of poly(ε‐caprolactone) (PCL) and polystyrene (PS). The morphology and thermal properties were studied by transmission electron microscopy, polarized light optical microscopy, and differential scanning calorimetry. The (PCL)₂(PS)₂ 72/28 (72 wt % PCL) sample was crystallized from a disordered melt. In this case, crystallization drove the structure formation and a lamellar morphology was obtained at the microdomain level, while spherulites were observed at a superstructural level. The other two samples, 39/61 and 27/73, with lower PCL content and higher total molecular weight, were not able to form spherulites. Surprisingly, these miktoarm star copolymers exhibited hexagonally packed cylinders and spheres morphologies, respectively, instead of lamellar and cylindrical morphology. Such unexpected and novel behavior was explained in terms of the higher resistance of the arms to be stretched in a miktoarm star copolymer when compared with the corresponding linear diblocks. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5387–5397, 2007     

An efficient synthetic route to well‐defined theta‐shaped copolymers

A series of well‐defined θ‐shaped copolymers composed of polystyrene (PS) and poly(ε‐caprolactone) (PCL) with controlled molecular weight and narrow molecular weight distribution have been successfully synthesized without any purification procedure by the combination of atom transfer radical polymerization (ATRP), ring‐opening polymerization (ROP), and the “click” chemistry. The synthetic process involves two steps: (1) synthesis of AB₂ miktoarm star copolymers, which contain one PCL chain terminated with two acetylene groups and two PS chains with two azido groups at their one end, (α,α′‐diacetylene‐PCL) (ω‐azido‐PS)₂, by ROP, ATRP, and the terminal group transformation; (2) intramolecular cyclization of AB₂ miktoarm star copolymers to produce well‐defined pure θ‐shaped copolymers using “click” chemistry under high dilution. The ¹H NMR, FTIR, and gel permeation chromatography techniques were applied to characterize the chemical structures of the resultant intermediates and the target polymers. Their thermal behavior was investigated by DSC. The mobility decrease of PCL chain across PS ring in the theta‐shaped copolymers restricts the crystallization ability of PCL segment. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2620–2630, 2009     

Morphology and microphase separation of star copolymers

Star copolymers have attracted significant interest due to their different characteristics compared with diblock copolymers, including higher critical micelle concentration, lower viscosity, unique spatial shape, or morphologies. Development of synthetic skills such as anionic polymerization and controlled radical polymerization have made it possible to make diverse architectures of polymers. Depending on the molecular architecture of the copolymer, numerous morphologies are possible, for instance, Archimedean tiling patterns and cylindrical microdomains at symmetric volume fraction for miktoarm star copolymers as well as asymmetric lamellar microdomains for star‐shaped copolymers, which have not been reported for linear block copolymers. In this review, we focus on morphologies and microphase separations of miktoarm (A_mB_n and ABC miktoarm) star copolymers and star‐shaped [(A‐b‐B)_n] copolymers with nonlinear architecture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1–21     

Aggregation phenomena of linear and miktoarm star copolymers of styrene and dimethylsiloxane: Influence of the architecture

The micellar behavior of PS-b-PDMS, PS-b-PDMS-b-PS linear block and (PS)₂(PDMS) miktoarm star copolymers of polystyrene (PS) and polydimethylsiloxane (PDMS) is investigated in DMF, a selective solvent for PS. The linear PS-b-PDMS and star (PS)₂(PDMS) copolymers exhibit different macromolecular architectures but similar compositions and total molecular weight, while the linear PS-b-PDMS-b-PS copolymer has the same composition as the diblock and miktoarm star but double their molecular weight. Static, dynamic light scattering and viscometry were used for the structural characterization of the micelles. Aggregation numbers were found to increase in the order PS-b-PDMS-b-PS < (PS)₂(PDMS) < PS-b-PDMS. The corona thickness was dependent on the molecular weight of the soluble PS chains. In the case of (PS)₂(PDMS), although the core area per PS chain, A_C, was significantly lower than that of the linear copolymers, the coronal chains were not significantly stretched. This can be attributed to the stiff nature of the PS chains, which maintains the elongated form of the chains.     

Synthesis and characterization of well‐defined polystyrene and poly(ε‐caprolactone) hetero eight‐shaped copolymers

Well‐defined hetero eight‐shaped copolymers composed of polystyrene (PS) and poly(ε‐caprolactone) (PCL) with controlled molecular weight and narrow molecular weight distribution were successfully synthesized by the combination of ring‐opening polymerization, ATRP, and “click” reaction. The synthetic procedure involves three steps: (1) preparation of a tetrafunctional PS and PCL star copolymer with two PS and two PCL arms using the tetrafunctional initiator bearing two hydroxyl groups and two bromo groups; (2) synthesis of tetrafunctional star copolymer, (α‐acetylene‐PCL)₂(ω‐azido‐PS)₂, by the transition of terminal hydroxyl and bromo groups to acetylene and azido groups through the reaction with 4‐propargyloxybutanedioyl chloride and NaN₃ respectively; (3) intramolecular cyclization reaction to produce the hetero eight‐shaped copolymers using “click” chemistry under high dilution. The ¹H NMR, FTIR, and gel permeation chromatography techniques were applied to characterize the chemical structures of the resulted intermediates and the target polymers. Their thermal behavior was investigated by DSC, and their crystallization behaviors of PCL were studied by polarized optical microscopy. The decrease in chain mobility of the eight‐shaped copolymers restricts the crystallization of PCL and the crystallization rate of PCL is slower in comparison with their corresponding star precursors. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6496–6508, 2008     

Arm-first method as a simple and general method for synthesis of miktoarm star copolymers

Miktoarm star copolymers containing two or more arm species were synthesized by atom transfer radical polymerization using a simple and general "arm-first" method, that is, one-pot cross-linking a mixture of different linear macroinitiator (MI) species by a divinyl cross-linker, such as divinylbenzene. Using linear MIs with a high degree of bromine chain-end functionality, including polyacrylate, polystyrene, polymethacrylate and poly(ethylene oxide), resulted in high-yield star polymers (>90%). Characterized by liquid adsorption chromatography techniques, which separated star polymers on the basis of the chemical composition of arms, the obtained star product was proved to be miktoarm star copolymers containing two or more arm species in one molecule, instead of mixture of different homoarm star polymers. Within our investigation, the molar ratios of the arms in the miktoarm star copolymers were always in agreement with the composition of the initial MI mixture, indicating the powerful capacity of this arm-first method for synthesis of miktoarm star copolymers with potentially any molar ratios and species of the arms. By using a mixture containing five types of linear MIs with different chemical compositions, miktoarm star copolymers containing five kinds of arms were synthesized for the first time, which significantly expanded the methodologies for synthesis of miktoarm star copolymers by living polymerization techniques.     

Confinement Effects on the Crystallization Kinetics and Self-Nucleation of Double Crystalline Poly(p-dioxanone)-b-poly(ϵ-caprolactone) Diblock Copolymers

The morphology, crystallization and self nucleation behavior of double crystalline diblock copolymers of poly(p-dioxanone) (PPDX) and poly(ϵ-caprolactone) (PCL) with different compositions have been studied by different techniques, including optical microscopy (OM), atomic force microscopy (AFM) and differential scanning calorimetry (DSC). The two blocks crystallize in a single coincident exotherm when cooled from the melt. The self-nucleation technique is able to separate into two exotherms the crystallization of each block. We have gathered evidences indicating that the PPDX block can nucleate the PCL block within the copolymers regardless of the composition. This effect is responsible for the lack of homogeneous nucleation or fractionated crystallization of the PCL block even when it constitutes a minor phase within the copolymer (25% or less). Nevertheless, we were able to show that decreasing amounts of PCL within the diblock copolymer still produces confinement effects that retard the crystallization kinetics of the PCL component and decrease the Avrami index. On the other hand evidence for confinement was also obtained for the PPDX block, since as its content is reduced within the copolymer, a depression in its self-nucleation and annealing temperatures were observed.     

Synthesis and "schizophrenic" micellization of double hydrophilic AB4 miktoarm star and AB diblock copolymers: structure and kinetics of micellization

Poly(N-isopropylacrylamide) (PNIPAM)-based tetrafunctional atom transfer radical polymerization (ATRP) macroinitiator (1b) was synthesized via addition reaction of mono-amino-terminated PNIPAM (1a) with glycidol, followed by esterification with excess 2-bromoisobutyryl bromide. Well-defined double hydrophilic miktoarm AB4 star copolymer, PNIPAM-b-(PDEA)4, was then synthesized by polymerizing 2-(diethylamino)ethyl methacrylate (DEA) via ATRP in 2-propanol at 45 degrees C using 1b, where PDEA was poly(2-(diethylamino)ethyl methacrylate). For comparison, PNIPAM-b-PDEA linear diblock copolymer with comparable molecular weight and composition to that of PNIPAM-b-(PDEA)4 was prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The pH- and thermoresponsive "schizophrenic" micellization behavior of the obtained PNIPAM65-b-(PDEA63)4 miktoarm star and PNIPAM70-b-PDEA260 linear diblock copolymers were investigated by 1H NMR and laser light scattering (LLS). In acidic solution and elevated temperatures, PNIPAM-core micelles were formed; whereas at slightly alkaline conditions and room temperature, structurally inverted PDEA-core micelles were formed. The size of the PDEA-core micelles of PNIPAM65-b-(PDEA63)4 is much smaller than that of PNIPAM70-b-PDEA260. Furthermore, the pH-induced micellization kinetics of the AB4 miktoarm star and AB block copolymers were investigated by the stopped-flow light scattering technique upon a pH jump from 4 to 10. Typical kinetic traces for the micellization of both types of copolymers can be well fitted with double-exponential functions, yielding a fast (tau1) and a slow (tau2) relaxation processes. tau1 for both copolymers decreased with increasing polymer concentration. tau2 was independent of polymer concentration for PNIPAM65-b-(PDEA63)4, whereas it decreased with increasing polymer concentration for PNIPAM70-b-PDEA260. The chain architectural effects on the micellization properties and the underlying mechanisms were discussed in detail.     

Syntheses and characterization of 16‐arm star and star diblock copolymer and AB8 9‐miktoarm star copolymer via NMRP and ROP from dendritic multifunctional macroinitiators

A dendritic macroinitiator having 16 TEMPO‐based alkoxyamines, Star‐16 , was prepared by the reaction of a dendritic macroinitiator having eight TEMPO‐based alkoxyamines, [G‐3]‐OH , with 4,4′‐bis(chlorocarbonyl)biphenyl. The nitroxide‐mediated radical polymerization (NMRP) of styrene (St) from Star‐16 gave 16‐arm star polymers with PDI of 1.19–1.47, and NMPR of 4‐vinylpyridine from the 16‐arm star polymer gave 16‐arm star diblock copolymers with PDI of 1.30–1.43. The ring‐opening polymerization of ε‐caprolactone from [G‐3]‐OH and the subsequent NMRP of St gave AB₈ 9‐miktoarm star copolymers with PDI of 1.30–1.38. The benzyl ether linkages of the 16‐arm star polymers and the AB₈ 9‐miktoarm star copolymers were cleaved by treating with Me₃SiI, and the resultant poly(St) arms were investigated by size exclusion chromatography (SEC). The SEC results showed PDIs of 1.23–1.28 and 1.18–1.22 for the star polymers and miktoarm stars copolymers, respectively, showing that they have well‐controlled poly(St) arms. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1159–1169, 2007.     

Calixarene‐centered amphiphilic A2B2 miktoarm star copolymers based on poly(ε‐caprolactone) and poly(ethylene glycol): Synthesis and self‐assembly behaviors in water

Novel calixarene‐centered amphiphilic A₂B₂ miktoarm star copolymers composed of two PCL arms and two PEG arms with calix[4]arene as core moiety were synthesized by the combination of CROP and “click” chemistry. First, a heterotetrafunctional calix[4]arene derivative with two hydroxyl groups and two alkyne groups was designed as a macroinitiator to prepare calixarene‐centered PCL homopolymers (C4‐PCL) by CROP in the presence of Sn(Oct)₂ as catalyst at 110 °C. Next, azide‐terminated PEG (A‐PEG) was synthesized by tandem treating methoxy poly(ethylene glycol)s (mPEG) with 4‐chlorobutyryl chloride and NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction between C4‐PCL and A‐PEG led to A₂B₂ miktoarm star copolymer [C4S(PCL)₂‐(PEG)₂]. ¹H NMR, FT‐IR, and SEC analyses confirmed the well‐defined miktoarm star architecture. These amphiphilic miktoarm star copolymers could self‐assemble into multimorphological aggregates in water. The calix[4]arene moieties with a cavity <1 nm on the hydrophilic/hydrophobic interface of these aggregates may provide potential opportunities to entrap guest molecules for special applications in supermolecular science. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Crystallization and structure formation of block copolymers containing a glassy amorphous component

Formation of higher‐order structure in crystallization from microphase‐separated melts was studied for polystyrene–polyethylene (PS–PE) diblock copolymers and PS–PE–PS triblock copolymers with time‐resolved synchrotron small‐angle X‐ray scattering (SR–SAXS) techniques. The PE block was crystallized at temperatures when the PS block was in the glassy state. In both crystallization and melting processes, only the peak intensity in the SR–SAXS curve changed, however, the peak positions including higher‐order peaks did not change. This means that the microphase‐structure in the crystalline state was completely the same as that in the molten state. These behaviors were observed regardless of any melt microphase structure. Also, once a stable microphase structure was formed in the molten state, the structure was not changed even if crystallization and melting were repeated. Behavior of crystallization from such microphase‐separated melts was also studied. Apparent activation energies of crystallization were high for all block copolymers, compared with that for the PE homopolymer. In particular, the triblock copolymers showed higher apparent activation energies than the diblock copolymers. Both degrees of crystallinity and Avrami indices were greatly suppressed in crystallization from the cylindrical domain. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4199–4206, 2004     

Crystallization and Melting of Model Polyethylenes with Different Chain Structures

The crystallization and melting of three model polyethylenes of different chain structures have been studied. The polymers studied were a linear copolymer, hydrogenated poly(butadiene); a hydrogenated poly(butadiene)-atactic poly(propylene) diblock copolymer; and a three-arm star hydrogenated poly(butadiene). An important feature of this work was that the crystallizing portions of the copolymers all have the same molecular lengths.It was found that the overall crystallization rate decreases steadily from a linear to a diblock to the star copolymer. The differences in crystallization rates are related primarily to the activation energy for segmental transport. The non-crystallizable structure affects the segmental mobility to different degrees. An estimation of this effect is presented from the analysis of the overall crystallization rates using classical nucleation theory. In spite of thedifferences in their molecular structure, there are no major differences in the supermolecular structure of samples crystallized rapidly or slowly cooled.The melting process followed by DSC of the isothermally crystallized linear and star copolymers shows two endothermic peaks at intermediate undercoolings. The double melting is associated with a partitioning of crystallizable ethylene sequences during crystallization. The longest sequences are preferentially selected in the early stages of the crystallization. Single melting peaks are obtained for high and very low undercoolings for the linear and the star copolymers as well as for the diblock in the whole range of temperatures. The lack of the second, lower melting endotherm in the diblock could be associated with the influence in the crystallization process of the amorphous block in the microphase segregated melt.This revised version was published online in November 2005 with corrections to the Cover Date.     

Hydrodynamic properties of model 3-miktoarm star copolymers

The synthesis of well-defined, nearly monodispersed, 3-miktoarm (from the greek word μlkτós meaning mixed) star copolymer of the A₂B type is described. A and B is either polystyrene (PS), polybutadiene (PBd), or polyisoprene (PI). The sequential controlled addition of living anionic B and A chains to methyltrichlorosilane leads to narrow molecular weight distribution miktoarm star copolymers with homogeneous composition. Characterization was carried out by size exclusion chromatography, low-angle laser light scattering, laser differential refractometry, membrane and vapor pressure osmometry, nuclear magnetic resonance and ultraviolet spectroscopy. Analysis of [η], R_H and R_v of the A₂B and one A₂B₂ miktoarm copolymers, suggests that a small expansion of the copolymer occurs either in a good solvent for both species or in a Θ solvent for one of them, as compared with the corresponding star homopolymers. This is in contrast to results obtained on linear block copolymers, and is due to the increased occurrence of heterocontacts in the miktoarm starshaped architecture. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of six‐arm star polystyrene‐block‐poly (3‐hexylthiophene) copolymer by combination of atom transfer radical polymerization and click reaction

A novel six‐arm star block copolymer comprising polystyrene (PS) linked to the center and π‐conjugated poly (3‐hexylthiophene) (P3HT) was successfully synthesized using a combination of atom transfer radical polymerization (ATRP) and click reaction. First, star‐shaped PS with six arms was prepared via ATRP of styrene with the discotic six‐functional initiator, 2,3,6,7,10,11‐hexakis(2‐bromoisobutyryloxy)triphenylene. Next, the terminal bromides of the star‐shaped PS were substituted with azide groups. Afterward, the six‐arm star block copolymer PS‐b‐P3HT was prepared using the click coupling reaction of azide‐terminated star‐shaped PS with alkynyl‐terminated P3HT. Various techniques including ¹H NMR, Fourier‐transform infrared and size‐exclusion chromatography were applied to characterize the chemical structures of the intermediates and the target block copolymers. Their thermal behaviors and optical properties were investigated using differential scanning calorimetry and UV–vis spectroscopy. Moreover, atomic force microscopy (AFM) was utilized to observe the morphology of the star block copolymer films. In comparison with two linear diblock copolymer counterparts, AFM results reveal the effect of the star block copolymer architecture on the microphase separation‐induced morphology in thin films. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of ABCD‐type miktoarm star copolymers and transformation into zwitterionic star copolymers

ABCD‐type 4‐miktoarm star copolymers of styrene (St), α‐methylstyrene (αMSt), tert‐butyl methacrylate (tBuMA), and 4‐vinylpyridine (4VP) were synthesized via anionic polymerization using 1,3‐bis(1‐phenylvinyl)benzene (m‐DDPE) as the linking molecule. The synthetic route was rationally designed with respect to the reactivity of individual propagating anion towards the double bond of m‐DDPE. Thus the synthesis includes several consecutive key reactions, for example, the monoaddition of polystyryllithium towards m‐DDPE, the polymerization of tBuMA initiated by the resulting monoadduct to produce a diblock macromonomer, the coupling of the macromonomer with poly(α‐methylstyryl)lithium to form a 3‐arm star anion, and the polymerization of 4‐vinylpyridine initiated by the star anion. These reactions were conducted either in a one‐pot process, in which the diblock macromonomer was in situ coupled with poly(α‐methylstyryl)lithium, or in a batch polymerization process, in which the same diblock macromonomer was separated. The final product was hydrolyzed to produce a zwitterionic miktoarm star copolymer, which was soluble at lower pH but insoluble in neutral and basic solution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4818–4828, 2007     

ABC type miktoarm star copolymers through combination of controlled polymerization techniques with thiol‐ene and azide‐alkyne click reactions

ABC type miktoarm star copolymer with polystyrene (PS), poly(ε‐caprolactone) (PCL) and poly(ethylene glycol) (PEG) arms was synthesized using controlled polymerization techniques in combination with thiol‐ene and copper catalyzed azide‐alyne “click” reactions (CuAAC) and characterized. For this purpose, 1‐(allyloxy)‐3‐azidopropan‐2‐ol was synthesized as the core component in a one‐step reaction with high yields (96%). Independently, ω‐thiol functionalized polystyrene (PS‐SH) was synthesized in a two‐step protocol with a very narrow molecular weight distribution. The bromo end function of PS obtained by atom transfer radical polymerization was first converted to xanthate function and then reacted with 1, 2‐ethandithiol to yield desired thiol functional polymer (PS‐SH). The obtained polymer was grafted onto the core by thiol‐ene click chemistry. In the following stage, ε‐caprolactone monomer was polymerized from the core by ring opening polymerization (ROP) using tin octoate as catalyst through hydroxyl groups to form the second arm. Finally, PEG‐acetylene, which was simply synthesized by the esterification of Me‐PEG and 5‐pentynoic acid, was clicked onto the core through azide groups present in the structure. The intermediates at various stages and the final miktoarm star copolymer were characterized by ¹H NMR, FTIR, and GPC measurements. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Crystallization and melting of poly(glycerol adipate)‐based graft copolymers with single and double crystallizable side chains

The crystallization and melting behavior of a series of poly(glycerol adipate) (PGA) based graft copolymers with either poly(ε‐caprolactone) (PCL), poly(ethylene oxide) (PEO), or PCL‐b‐PEO diblock copolymer side chains (i.e., PGA‐g‐PCL, PGA‐g‐PEO, and PGA‐g‐(PCL‐b‐PEO)) was studied using polarized light optical microscopy (POM), differential scanning calorimetry (DSC), small‐angle X‐ray scattering (SAXS), and wide‐angle X‐ray diffraction (WAXD). These results were compared with the behavior of the corresponding linear analogs (PEO, PCL, and PCL‐b‐PEO). POM revealed that spherulitic morphology was retained after grafting. However, spherulite radius as well as radial growth rate was significantly smaller in the graft copolymers. Evaluation of isothermal crystallization kinetics by means of the Avrami theory revealed that the nucleation density was much higher in the graft copolymers. The DSC results indicated that the degree of crystallinity decreased strongly upon grafting while the melting temperatures of PGA‐g‐PCL and PGA‐g‐PEO were found to be close to the values of neat PCL and PEO, respectively. This was attributed to the absence of specific thermodynamic interactions, and, additionally, to lamella thicknesses being similar to those of the homopolymers. The latter point was confirmed by SAXS measurements. In case of PCL‐b‐PEO diblock copolymers and PGA‐g‐(PCL‐b‐PEO) graft copolymers, the crystallization behavior and thus the resulting lamellar morphology is more complex, and a suitable model was developed based on a combination of DSC, WAXD, and SAXS data. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1581–1591     

Probe diffusion in homogeneous diblock copolymers

Forced Rayleigh scattering was used to investigate the diffusion of a photoreactive dye molecule in two homogeneous poly(styrene-b-isoprene) (SI) diblock copolymers with overall molecular weights of approximately 2000. Although diffusion rates were intermediate to TTI transport in homopolymer polystyrene (PS) and polyisoprene (PI), system dynamics appear to be largely dictated in each case by the PI block. The size of the polymer jumping unit, on the other hand, is evaluated from a free-volume analysis of the data, and is found to be governed predominantly by the PS component of the copolymer. The mechanism for tracer diffusion in low-molecular-weight block copolymers appears analogous to transport in a high molecular weight SI diblock copolymer (M_n = 13,600) that has been solvated sufficiently in toluene to be microstructurally disordered. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1739–1746, 1998     

Features of structural relaxation in diblock copolymers

Time- and temperature-dependent structural relaxation (physical aging) of poly (styrene-b-methyl methacrylate) (PS-b-PMMA) block copolymers was investigated by calorimetry. Our study reveals the interplay of the relaxation responses of the two components of the copolymer in an intermediate temperature regime. That is, when the testing temperature is closely below the glass transition temperatures of PS and PMMA, structural relaxation in these polymer phases takes place concurrently, the corresponding thermogram displays partially superposed dual endothermic peaks as a feature of physical aging in the diblock copolymers. The aging response for each component is identified from a curve fitting method and analyzed by the relaxation of enthalpy. Comparing with the homopolymer analogs, the PS and PMMA in diblock copolymers show enhanced aging rate.     

Miktoarm star copolymers via combination of RAFT arm‐first technique and aldehyde–aminooxy click reaction

A facile synthetic pathway to miktoarm star copolymers with multiple arms has been developed by combining reversible addition–fragmentation chain transfer (RAFT) arm‐first technique and aldehyde–aminooxy “click” coupling reaction. Star polystyrene (PS) with aldehyde functionalized core was initially prepared by RAFT arm‐first technique via crosslinking of the preformed linear macro‐RAFT agents using a newly designed aldehyde‐containing divinyl compound 6,6′‐(ethane‐1,2‐diylbis(oxy))bis(3‐vinylbenzaldehyde) (EVBA). It was then used as a multifunctional coupling agent for the subsequent formation of the second generation poly(ethylene glycol) (PEG) arms via the click coupling reaction between its aldehyde groups and aminooxy‐terminated PEGs. The possible formation of PS‐PEG miktoarm star copolymer with Janus‐like segregated structure in cyclohexanone was also investigated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3323–3330, 2010