Density functional theory calculations of surface properties and H2 adsorption on the Cu2O (1 1 1) surface

First-principles calculation on the basis of the density functional theory (DFT) and generalized gradient approximation have been applied to study the adsorption of H₂ on the stoichiometric O-terminated Cu₂O (1 1 1), Cu₂O (1 1 1)-Cu_CUS and Cu-terminated Cu₂O (1 1 1) surfaces. The optimal adsorption position and orientation of H₂ on the stoichiometric O-terminated Cu₂O (1 1 1) surface and Cu-terminated Cu₂O (1 1 1) surface were determined and electronic structural changes upon adsorption were investigated by calculating the Local Density of States (LDOS) of the Cu_CUS 3d and Cu_CUS 4s of stoichiometric O-terminated Cu₂O (1 1 1) surface. These results showed that H₂ molecule adsorption on Cu_CUS site parallel to stoichiometric O-terminated Cu₂O (1 1 1) surface and H₂ molecule adsorption on Cu₂ site parallel to Cu-terminated Cu₂O (1 1 1) surface were the most favored, respectively. The presence of surface copper vacancy has a little influence on the structures when H₂ molecule adsorbs on Cu_CSA, O_CUS and O_CSA atoms and the H₂ molecule is only very weakly bound to the Cu₂O (1 1 1)-Cu_CUS surface. From the analysis of stoichiometric O-terminated Cu₂O (1 1 1) Local Density of States, it is observed that Cu_CUS 3d orbital has moved to a lower energy and the sharp band of Cu_CUS 4s is delocalized when compared to that before H₂ molecule adsorption, and overlapped substantially with bands due to adsorbed H₂ molecule. The Mulliken charges of H₂ adsorption on Cu_CUS site showed that H₂ molecule obtained electron from Cu_CUS which was consistent with the calculated electronic structural changes upon H₂ adsorption.     

Reactivity of the Cu2O(1 0 0) surface: Insights from first principles calculations

We present a summary of results of systematic first principles calculations of the electronic and geometric structures of the Cu₂O(1 0 0) surface and the process of CO oxidation on this surface (energetics and pathways of adsorption, diffusion and reactions of CO and O₂ on the surface). The (p, T) phase diagram of the Cu₂O(1 0 0) in equilibrium of with gas phase O₂ built using the ab initio thermodynamics approach suggests that the O-terminated surface is preferred over the Cu-terminated one within the entire ranges of pressures and temperatures in which the compound exists. Metastable Cu-terminated Cu₂O(1 0 0) is found to undergo a surface reconstruction in agreement with experiment. We find CO to oxidize spontaneously on the O-terminated Cu₂O(1 0 0) surface by consuming surface O atoms. Our calculations also show that the surface O-vacancies left in the course of the CO oxidation can be easily filled with dissociative adsorption of the gas phase O₂ molecules, which are usually present in reaction environment.     

Stability and electronic properties of the O-terminated Cu2O(111) surfaces: First-principles investigation

The effect of different vacancies on the morphology of the O-terminated Cu₂O(111) surface has been studied through the first-principles calculations. Our results show that Cu and O vacancies trigger large relaxations and formation of two different facets. Our emulated STM images are in consistent with the experimental STM patterns. A sizeable magnetic moment (∼1.0 μ_B) was found for surfaces with either Cu or O vacancies. The calculated formation energies of surface vacancies indicate that the deficient surfaces are more stable than the stoichiometric O-terminated (1×1) surface, which is also in line with our results obtained from ab initio atomistic thermodynamics studies.     

A density functional theory study on the adsorption of CO and O2 on Cu-terminated Cu2O （111） surface

The adsorptions of CO and 02 molecules individually on the stoichiometric Cu-terminatcd Cu20 （111） surface are investigated by first-principles calculations on the basis of the density functional theory. The calculated results indicate that the CO molecule preferably coordinates to the Cu2 site through its C atom with an adsorption energy of-1.69 eV, whereas the 02 molecule is most stably adsorbed in a tilt type with one O atom coordinating to the Cu2 site and the other O atom coordinating to the Cul site, and has an adsorption energy of -1.97 eV. From the analysis of density of states, it is observed that Cu 3d transfers electrons to 2π orbital of the CO molecule and the highest occupied 5σ orbital of the CO molecule transfers electrons to the substrate. The sharp band of Cu 4s is delocalized when compared to that before the CO molecule adsorption, and overlaps substantially with bands of the adsorbed CO molecule. There is a broadening of the 2π orbital of the 02 molecule because of its overlapping with the Cu 3d orbital, indicating that strong 3d-2π interactions are involved in the chemisorption of the 02 molecule on the surface.     

Co chemisorption on PtCu surfaces III. CO on PtCu(111)

Selected thermal desorption and valence band photoemission data on the chemisorption of CO on PtCu(111) surfaces are presented. The main objective is to make a comparison with CO chemisorption on an annealed (1 × 3) reconstructed Pt_0.98Cu_0.02(110) surface. The (111) alloy surfaces are unreconstructed (1 × 1) surfaces, with average near-surface Cu concentrations ranging from ? 7.5% to ? 20% as indicated by the Cu 920 eV Auger signal. It is observed that the effect of alloying Pt(111) with Cu is to progressively lower the desorption peak temperature and hence the free energy of CO desorption from Pt sites. A second observation is that the energy distribution of the Cu 3d-derived states is little affected by CO adsorption on Cu sites at 155 K. Both these results offer a contrast to the results for CO/Pt_0.98Cu_0.02(110) reported earlier.     

Evaluating the electric property of different crystal faces and enhancing the Raman scattering of Cu2O microcrystal by depositing Ag on the surface

The surface electric property of Cu₂O microcrystal affects the interaction of facets with substance in the aqueous solution, and hence plays a key role in determining the photocatalytic activity. In this paper, the capability of Cu₂O microcrystals with exclusive {111}, {110} or both lattice surfaces in reducing Ag⁺ to Ag⁰ were investigated. Ag particles selectively deposited on {111} surfaces of Cu₂O, while not on {110} surfaces. The different behaviors of the two surfaces are mainly attributed to their different electric properties: negatively-charged {111} surfaces absorb Ag⁺ ions while positively-charged {110} surfaces repel them. Raman scattering of Cu₂O {111} surfaces was enhanced by the photo-deposition of Ag particles.     

阳离子空位和吸附氧的协同作用对Na0.5Bi0.5TiO3(100)表面磁性影响的第一性原理研究

The combination effect of cation vacancies and O₂ adsorption on ferromagnetism of Na_0.5Bi_0.5TiO₃(100) surface is studied by using density functional theory.An ideal Na_0.5Bi_0.5TiO₃(100) surface is non-magnetic and the cation vacancy could induce the magnetism.By comparing the formation energies for Na,Bi and Ti vacancy,the Na vacancy is more stable than the others.Therefore,we focus on the configuration and electric structure for the system of O₂ molecule adsorption on the Na_0.5Bi_0.5TiO₃(100) surface with a Na vacancy.Among the five physisorption configurations we considered,the most likely adsorption position is Na vacancy.The O₂ adsorption enhances the magnetism of the system.The contribution of spin polarization is mainly from the O 2p orbitals.The characteristics of exchange coupling are also calculated,which show that the ferromagnetic coupling is favorable.Compared with the previous calculation results,our calculations could explain the room-temperature ferromagnetism of Na_0.5Bi_0.5TiO₃ nanocrytalline powders more reasonably,because of taking into account adsorbed oxygen and cation vacancies.Moreover,our results also show that adsorption of O₂ molecule as well as introduction of cation vacancies may be a promising approach to improve multiferroic materials.     

Interactions of CO molecules adsorbed on oxidised Cu(111) and Cu(110)

Reflection absorption infrared spectroscopy has been used in conjunction with LEED and surface potential measurements to study low temperature CO adsorption on the oxidised Cu surfaces Cu(111)O|$\text{3}\text{2}\text{?}\text{2}$|, Cu(110)O(2 × 1) and Cu(110)Oc(6 × 2). On all three surfaces adsorption at 80 K yields surface potential changes in excess of 0.6 V and does not lead to the formation of an ordered overlayer. At high coverages the adsorption enthalpy is lower than on the clean surfaces. Infrared spectra show the growth of a doublet band with components initially at 2100 and 2117 cm^?1 on the oxidised Cu(111) surface. Similar features seen on the oxidised Cu(110) surfaces are accompanied by a band at 2140 cm^?1: a very weak band at the same frequency on oxidised Cu(111) is attributed to defect sites. Studies of the temperature dependence of the spectrum from oxidised Cu(111) lead to the conclusion that two different binding sites are occupied. Spectra of ${}^{12}\text{CO}{}^{13}\text{CO}$ mixtures show that the molecules occupying these sites are in close proximity to each other, and that the spectrum is subject to large but opposing coverage-dependent frequency shifts.     

H2O分子在Fe（100）, Fe（110）, Fe（111）表面吸附的第一性原理研究

采用第一性原理研究了H₂O分子在Fe（100）,Fe（110）,Fe（111）三个高对称晶面上的表面吸附.结果表明,H₂O分子在三个晶面上的最稳定结构皆为平行于基底表面的顶位吸附结构.H₂O分子与三个晶面相互作用的吸附能及几何结构计算结果表明H₂O分子与三个晶面的相互作用程度不同,H₂O分子与Fe（111）晶面的相互作用最强,其次是Fe（100）,相互作用最弱的是Fe（110）表面,而这与晶面原子 关键词： 第一性原理 Fe单晶表面 2O分子')" href="#">H₂O分子 分子吸附     

The adsorption of hydrogen on iron; A surface orbital modified occupancy — bond energy bond order calculation

A Surface Orbital Modified Occupancy — Bond Energy Bond Order (SOMO-BEBO) model calculation of hydrogen adsorption on iron is presented. This calculation represents a novel approach to the CFSO-BEBO method in that the calculation is correlated in a consistent way with the thermal desorption spectra of the hydrogen-iron system. Heats of molecular adsorption calculated are ?32.88, ?35.68 and ?49.57 kJ/mol for the iron (110), (100), and (111) surfaces, respectively. Heats of dissociative adsorption calculated are ?54.40, ?75.30 and ?87.90 kJ/mol for the three states on the iron (111) surface; ?51.21 and ? 73.62 kJ/mol for the two states on the iron (100) surface; and ?63.78 kJ/mol for the one state on the iron (110) surface. Activation energies for dissociative adsorption were found to be small or zero for the iron (111) surface while non-zero activation energies of 49.27 and 45.05 kJ/mol were calculated for the iron (100) and (110) surfaces, respectively. The FeH single-order bond energy has been calculated to be 298.2 kJ/mol. The radius of the hydrogen surface atom has been estimated to be 1.52 × 10^?10 m consistent with the expected size of an H^? ion. The elimination of certain surface sites for molecular adsorption as a result of the ferromagnetism of iron is suggested by the calculation. The reason for the absence of well defined LEED patterns for hydrogen adsorption on the iron (111) and (100) surfaces [Bozso et al., Appl. Surface Sci. 1 (1977) 103] is explained on the basis of the size of the H^? surface ion. The adsorption of hydrogen on the iron (110) surface is consistent with a relatively stable, small-sized H⁺₂ surface ion giving, therefore, a regular LEED pattern and a positive surface potential upon adsorption of hydrogen on this surface.     

Theoretical studies of CO and NO on CuO and Cu2O(110) surfaces

The characteristics of CO and NO adsorption on surfaces of CuO(110) and Cu₂O(110) have been studied by using the self-consistent-charge discrete variational X_a method (SCC-DV-X_a). The calculated results show that the CO and NO molecules are perpendicularly adsorbed on cuprous ions of Cu₂O and cupric ions of CuO, respectively and with oxygen pointing upward in both cases. The order of chemisorption energy of the four adsorbed systems is: CuO-NO > Cu₂O-CO > Cu₂O-NO > CuO-CO. In all chemisorptions discussed d orbitals of Cu do play an important role.     

A theoretical study of the reactivity of Cu2O(111) surfaces: the case of NO dissociation

We compare the electronic properties of Cu(111) and Cu(2)O(111) surfaces in relation to the dissociation of NO using first principles calculations within density functional theory. We note a well-defined three-fold site on both O- and Cu-terminated Cu(2)O surfaces which is verified as the active site for the adsorption and dissociation of NO. The interaction of Cu with O atoms results in the forward shifting of the local density of states and formation of unoccupied states above the Fermi level, compared to the fully occupied d band of pure Cu. These results give valuable insights in the realization of a catalyst without precious metal for the dissociation of NO.     

Adsorption and dissociation of H2 on the Cu2O(1 1 1) surface: A density functional theory study

Interactions of atomic and molecular hydrogen with perfect and deficient Cu₂O(1 1 1) surfaces have been investigated by density functional theory. Different kinds of possible modes of H and H₂ adsorbed on the Cu₂O(1 1 1) surface and possible dissociation pathways were examined. The calculated results indicate that O_SUF, Cu_CUS and O_vacancy sites are the adsorption active centers for H adsorbed on the Cu₂O(1 1 1) surface, and for H₂ adsorption over perfect surface, Cu_CUS site is the most advantageous position with the side-on type of H₂. For H₂ adsorption over deficient surface, two adsorption models of H₂, H₂ adsorbing perpendicularly over O_vacancy site and H₂ lying flatly over singly-coordinate Cu-Cu short bridge, are typical of non-energy-barrier dissociative adsorption leading to one atomic H completely inserted into the crystal lattice and the other bounded to Cu_CUS atom, suggesting that the dissociative adsorption of H₂ is the main dissociation pathway of H₂ on the Cu₂O(1 1 1) surface. Our calculation result is consistent with that of the experimental observation. Therefore, Cu₂O(1 1 1) surface with oxygen vacancy exhibits a strong chemical reactivity towards the dissociation of H₂.     

Defect-induced nonpolar-to-polar transition at the surface of CuInSe2

In contrast to zinc-blende semiconductors, where the nonpolar (110) surface has the lowest energy, our first-principles calculations on the chalcopyrite semiconductor CuInSe₂ reveal that facets terminated by the (112)-cation and (1̄1̄2̄)-Se polar surfaces are lower in energy than the unfaceted (110) plane, despite the resulting increased surface area. This explains the hitherto puzzling existence of polar microfacets on nominally nonpolar (110) chalcopyrite surfaces. The extraordinary stability of these polar facets originates from the effective neutralization of surface charge by low-energy ordered Cu_In antisite or Cu vacancy surface defects, while the relaxed but defect-free (112) surface is metallic and much higher in energy. We explain the low carrier density of the observed faceted surface in terms of autocompensation between opposite-polarity facets.     

Epitaxial growth defects and interfacial structures of Cu deposited on TiO2

Epitaxial growth defects and the interfacial structure between vapor deposited Cu and TiO₂(110) have been studied by combined high-resolution electron microscopy (HREM) and image simulations. The Cu film was found to grow epitaxially with an orientation given by Cu(111)//TiO₂(110) and Cu110//TiO₂ [001]. With this relationship, there exist two equivalent domain orientations which are rotated with respect to each other by 180°. Localized misfit dislocations have not been detected, but {111} stacking faults and microtwins were observed which may occur as a result of 3-D island coalescence. HREM observations and image simulations have been used to study the interface atomic structure. The dominant interfacial structure has a stoichiometric (110) TiO₂ surface with bridging rows of O atoms and occasionally, an interfacial structure having a reduced (110) TiO₂ surface terminated by both Ti and O atoms has been observed locally.     

CH3NO2在Cu(111)面吸附态的研究

用CNDO/2半经验量化计算方法对CH₃NO₂分子在Cu(111)面四个吸附位上25种吸附态进行了优化计算,得到以CH₃NO₂分子中的-NO₂取向吸附在Cu(111)面的桥位上,且CH₃NO₂分子中的ONO面与Cu-Cu键成60°时为最稳吸附态。计算得到的这一稳定吸附态的吸附取向和吸附体系的态密度结果与我们的实验结果是一致的;从吸附态的轨道成分分析表明, 关键词：     

Adsorption of hydrogen on palladium single crystal surfaces

The adsorption of hydrogen on clean Pd(110) and Pd(111) surfaces as well as on a Pd(111) surface with regular step arrays was studied by means of LEED, thermal desorption spectroscopy and contact potential measurements. Absorption in the bulk plays an important role but could be separated from the surface processes. With Pd(110) an ordered 1 × 2 structure and with Pd(111) a 1 × 1 structure was formed. Maximum work function increases of 0.36, 0.18 and 0.23 eV were determined with Pd(110), Pd(111) and the stepped surface, respectively, this quantity being influenced only by adsorbed hydrogen under the chosen conditions. The adsorption isotherms derived from contact potential data revealed that at low coverages θ ∞ √p_H2, indicating atomic adsorption. Initial heats of H₂ adsorption of 24.4 kcal/mole for Pd(110) and of 20.8 kcal/mole for Pd(111) were derived, in both cases E_ad being constant up to at least half the saturation coverage. With the stepped surface the adsorption energies coincide with those for Pd(111) at medium coverages, but increase with decreasing coverage by about 3 kcal/mole. D₂ is adsorbed on Pd(110) with an initial adsorption energy of 22.8 kcal/mole.     

Oxygen adsorption on the LaB6(100), (110) and (111) surfaces

Oxygen adsorption on the LaB₆(100), (110) and (111) clean surfaces has been studied by means of UPS, XPS and LEED. The results on oxygen adsorption will be discussed on the basis of the structurs and the electronic states on the LaB₆(100), (110) and (111) clean surfaces. The surface states on LaB₆(110) disappear at the oxygen exposure of 0.4 L where a c(2 × 2) LEED pattern disappears and a (1 × 1) LEED pattern appears. The work function on LaB₆(110) is increased to ～3.8 eV by an oxygen exposure of ～2 L. The surface states on LaB₆(111) disappear at an oxygen exposure of ～2 L where the work function has a maximum value of ～4.4 eV. Oxygen is adsorbed on the surface boron atoms of LaB₆(111) until an exposure of ～2 L. Above this exposure, oxygen is adsorbed on another site to lower the work function from ～4.4 to ～3.8 eV until an oxygen exposure of ～100L. The initial sticking coefficient on LaB₆(110) has the highest value of ～1 among the (100), (110) and (111) surfaces. The (100) surface is most stable to oxygen among these surfaces. It is suggested that the dangling bonds of boron atoms play an important role in oxygen adsorption on the LaB₆ surfaces.     

The chemical composition of a metal/ceramic interface on an atomic scale: The Cu/MgO {111} interface

The chemical composition profile across a Cu/MgO {111}-type heterophase interface, produced by the internal oxidation of a Cu(Mg) single-phase alloy at 1173 K, is measured via atom-probe field-ion microscopy with a spatial resolution of 0.121 nm; this resolution is equal to the interplanar spacing of the {222} MgO planes. In particular, we demonstrate directly that the bonding across a Cu/MgO {111}-type heterophase interface, along a <111> direction common to both the Cu matrix and an MgO precipitate, has the sequence Cu|O|Mg... and not Cu|Mg|O...; this result is achieved without any deconvolution of the experimental data. Before determining this chemical sequence, it was established, via high-resolution electron microscopy, that the morphology of an MgO precipitate in a Cu matrix is an octahedron faceted on {111} planes with a cube-on-cube relationship between a precipitate and the matrix; that is, {111}_Cu//{222}_MgO and <110>_Cu // <110>_MgO.     

无序二元合金（NixCu1－x）不同解理面上O吸附对Cu偏析的影响

应用计算机编程构造出了存在和不存在表面偏析的无序二元合金Ni_xCu_1-x (x=0.4)(１００)表面及(１１０)表面的原子集团模型，然后按覆盖度θ=0.5，构造 出了O吸附后的原子集团模型，应用Recursion方法计算了O在Ni_xCu_{1-x(存在偏析和不存在偏析时)无序二元合金(１００)和(１１０)表面吸附的电子结构.由此 得出：1)O吸附使合金表面态密度峰降低，带宽加宽，并且表面Ni原子的d电子与吸附质O原 子的s，p电子的共价作用比Cu更强烈；2)O吸附在NixCu1-x(x=0.4) (１１０)表面比(１００)表面更稳定；3)O的吸附抑制了Cu在表面富集，且这种作用主要表 现在表面一层. 关键词： 化学吸附 表面偏析 Recursion方法 态密度}