Electron impact ionization and excitation rate coefficients in the negative glow region of a glow discharge

Some easy to use reasonable approximations for electron impact rate coefficients have been considered. The most important rate coefficients for electron collisions in noble gases are electron-neutral ionization and electron impact excitation. Electron-neutral ionization besides electron impact excitation of some states of the argon and helium atom in direct current (dc) glow discharge plasma has been calculated. The plasma parameters of electron are significant factors for computing the rate coefficients. We present first results of probe diagnostic that includes the double probe measurements of the plasma parameters, namely, electron temperature (T_e) and electron density (n_e). Electron properties obtained from the double probe characteristic curves including T_e and n_e as well as the calculated rate coefficients (ionization and excitation) were studied as a function of the axial distance from the cathode while the discharge operating parameters of voltage and pressure were varied. Two regions of the glow discharge were investigated: cathode fall region and negative glow. Particular emphasis was placed on the negative glow region.     

Long‐Time Evolution of a Low Pressure Laboratory Plasma after Application of Transient high Voltage Positive Pulses

The long‐time evolution of weakly‐collisional plasma with application of high voltage positive pulses to an electrode immersed in plasma, with pulse widths less than as well as more than ion plasma periods, is studied. The plasma is produced by electron impact ionization of argon or helium gas, where electrons are coming out from dc biased hot thoriated tungsten filaments. It is observed that during the temporal evolution of argon plasma, a beam component exists along with temporal bulk electrons giving rise to a double hump profile of transient Electron Distribution Function (EDF). However, in the case of temporal evolution of helium plasma, only a bulk electron population is present. The obtained results are explained by understanding the role played by thermionically emitted electrons during the plasma evolution, the role of the difference of ionization rates of helium and argon, and the higher temporal plasma potential. (© 2016 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Excitation of Doubly‐Charged Ion Emission Lines from a Grimm‐Style Glow Discharge Plasma—Comparison Between Yttrium and Zirconium

Spectra of yttrium and zirconium emitted from a Grimm‐style glow discharge plasma were investigated to elucidate the excitation mechanism of doubly‐charged ionic lines when using argon–helium mixed gas as well as argon gas alone. The energy sum for exciting doubly‐charged ion species of yttrium is slightly smaller compared to the case of zirconium, which yields an interesting correlation in the excitation energy between their ionic species and excited species of helium or argon. The Y III emission lines which were assigned to the 4p⁶5p–4p⁶5s(4p⁶4d) transitions could be observed in the argon–helium mixed gas plasma, but those were hardly excited with argon gas only. The Zr III emission lines did not appear in the spectra emitted by the argon gas plasma nor by the mixed gas plasma. A possible explanation for these phenomena is that the excitation of these ionic species is caused principally by collisional energy transfer from helium species to the analyte atoms.     

Excited atoms in argon gas discharge plasma

General principles are discussed for a gas discharge plasma involving excited atoms where electron-atom collision processes dominate. It is shown that an optimal kinetic model of this plasma at not large electric field strengths can be based on the rate constants of quenching excited atom states by electron impact. The self-consistent character of atom excitation in gas discharge plasma is important and results in the tail of the energy distribution function of electrons being affected by the excitation process, which in turn influences the excitation rate. These principles are applied to an argon gas discharge plasma where excitation and ionization processes have a stepwise character and proceed via formation of argon atom states with the electron shell 3p ⁵4s.     

Relaxation of the electron temperature in an inert-gas afterglow plasma at elevated pressures

The relaxation of the electron temperature T _e in helium and neon afterglow at elevated pressures is studied theoretically and experimentally. It is shown that the processes in which fast electrons are produced are accompanied by the heating of thermal electrons. The high-energy part of the electron energy distribution function is studied in the intermediate regime (between the local and nonlocal regimes) of its formation. It is shown that, in this case, the calculated effective energy transferred from the fast electrons to the thermal electrons depends substantially on the wall potential of the discharge tube. Comparison of these calculations with experiments testifies to the reliability of the probe technique for measuring T _e in an afterglow at elevated pressures.     

The impact of the Ramsauer effect on the frequency of elastic collisions in inductive RF discharges in inert gases

This paper presents the results of investigating the power absorption mechanism of an inductive RF discharge plasma. Dependences of the frequency of elastic electron collisions with inert gas atoms (helium, neon, argon, and krypton) on the pressure are given. In the frequency range of 3 × 10⁶–3 × 10⁷ s^?1, an equivalent plasma resistance and the power input into the plasma are determined by the values of collision frequency and electron density within a skin layer and do not depend on the type of gas within the limits of experimental error. Upon reaching the electron temperature of ～1 eV, the energy of the main part of electrons lies in the range of Ramsauer’s minimum for elastic cross section. This leads to a decreasing elastic-collision frequency in heavy inert gases as compared to helium.     

Effect of ambient conditions on laser-induced breakdown spectra

The role of different ambient conditions on LIBS signal intensity was investigated for better understanding and performance of LIBS as a quantitative and qualitative analytical technique. For this purpose, the relative LIBS signal intensities were measured for a standard Cr line (520.8 nm) at different gas pressures of Ar, He, and air. The plasma was generated using a Q-switched pulsed Nd:YAG laser having wavelength of 1064 nm and pulse duration of 8 ns. The analysis revealed that the intensities of the spectral atomic Cr line (520.8 nm) were strongly enhanced under the argon environment in 10?C40 mbar range. The electron excitation temperature (T _e ) and number density (n _e ) were estimated by using a Boltzmann plot and a Stark broadening profile, respectively. For optimum dependence of LIBS, laser energy and pressure dependence was also studied. The electron temperature and number density showed an increase with increase in ambient gas pressure.     

Optical emission spectroscopic studies on laser ablated TiO2 plasma

Optical emission spectroscopic investigations of the plasma produced during Nd:YAG laser ablation of sintered TiO₂ targets, in oxygen and argon gas environments are reported. The spatial variations of electron temperature (T_e) and electron number density (N_e) are studied. The effect of oxygen/argon pressure on electron temperature (T_e) and electron number density (N_e) is presented. The kinematics of the emitted particles and expansion of plume edge are discussed. Spatio-temporal variations of various species in TiO₂ plasma were recorded and corresponding velocities were calculated. The effect of oxygen pressure on intensity of neutral/ion species and their corresponding velocities is also reported.     

Effect of Discharge Plasma Potential on Diffusion Plasma Parameters Controlled by a Mesh Grid in a Double Plasma Device

The plasma region under investigation is separated from the discharge region by a mesh grid. Plasma potential and electron number densities and electron temperatures under bi‐Maxwellian approximation for electron distribution function of the multi‐dipole argon plasma are measured. The cold electrons in the diffusion region are produced by local ionization. The hot electrons are the ionizing electrons behaving as Maxwellian. The electron trapping process in the discharge region is produced by potential well due to positive plasma potential with respect to the anode and by a repulsive grid. The dependence of ratios of the density of the hot to the cold electrons N_E (=N_eh/N_ec) and hot to cold electron temperature T(=T_eh/T_ec) in the diffusion region on the depth of the potential well has been investigated. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Soft x-ray PHA measurement of the long pulse discharge in HT-7 tokamak

By analyzing the soft x-ray energy spectrum measured by the soft x-ray pulse height analysis (PHA) system, the electron temperature (Te) and the effective charge number (Zeff) of the ultra-long pulse discharge driven by lower hybrid wave (LHW) were obtained in the HT-7 tokamak. Moreover, the information of medium-Z impurities such as Ti, Cr, Fe, and Ni intrinsic to HT-7 tokamak can also be inspected. The accuracy of the electron temperature derived from the soft x-ray energy spectrum measurements is verified by comparing with the temperature measured by the Thomson scattering system for various plasmas and electron cyclotron emission diagnostic system for ohmic plasmas. The bulk electron temperature of about 1 keV and Zeff≈2 were achieved for long pulse plasma. The appreciable Kα lines of Ti, Cr, Fe and Ni metallic impurities released from the antennas of radio frequency wave and/or the first wall and Ar injected into plasma can be observed, and they kept stable during the long duration discharges. As a result, the longest pulse discharge with relatively high temperature of Te(0)∼1 keV, and ne(0)∼0.5×¹⁰¹⁹ m−3 has been achieved with a duration of 400 s in the HT-7 experimental campaign in 2008.     

The role of vibrational temperature variations in a pulsed dielectric barrier discharge plasma device

The use of dielectric barrier discharge (DBD) plasmas has become a practical way to carry out surface treatment where precise control of the plasma parameters, such as rotational and vibrational temperatures (T_rot and T_vib), is required. As the T_vib of an atmospheric pressure plasma jet appears to be the most important parameter related to the improvement of surface treatments, in this work, we analysed two methods to increase the values of T_vib in a DBD plasma jet device. One of the methods is to reduce the exit size (ø) of the DBD reactor, which results in an increase in the measured T_vib values, due to an increase in the pressure inside the reactor. The other method is to change the gas flow rate (GFR) used to produce the plasma jets. This leads to a T_vib reduction when the GFR is increased in the case of using helium or nitrogen as the working gas, but the opposite happens (an increase in the T_vib values) when argon is used, with different phenomena causing the variation of T_vib in each situation.     

Numerical study on characteristics of nitrogen discharge at high pressure with induced plasma

Based on the fluid theory of plasma, a model is built to study the characteristics of nitrogen discharge at high pressure with induced argon plasma. In the model, the spices such as electron, N₂⁺, N₄⁺, Ar⁺, and two metastable states (N₂ (A³∑_u⁺), N₂ (a¹∑_u^-)) are taken into account. The model includes particle's continuity equations, electron's energy balance equation, and Poisson equation. The model is solved with a finite difference method. The numerical results are obtained and used to investigate the effect of time taken to add nitrogen gas and initially-induced argon plasma pressure. It is found that lower speeds of adding the nitrogen gas and varying the gas pressure can induce higher plasma density, and inversely lower electron temperature. At high-pressure discharge, the electron density increases when the proportion of nitrogen component is below 40%, while the electron density will keep constant as the nitrogen component further increases. It is also shown that with the increase of initially-induced argon plasma pressure, the density of charged particles increases, and the electron temperature as well as the electric field decrease.     

Detailed comparison between probe density measurements of glow discharge in argon and in helium

In this article we shall look a bit more closely at some of the fundamental plasma parameters obtained by a cylindrical Langmuir probe within low-pressure electrical gas discharge plasma. The presented measurements were made in argon and in helium glow discharge plasmas. We are mainly concerned with the densities of the charged particles (electrons and ions) within the plasma and the effect of the discharge conditions upon them. The electron density is calculated from the electron current at the space potential and from the integration over the EEDF. The ion density is calculated by using the OML collisionless theory. The parameterization of Laframboise's numerical results is also used for the ion density calculation. In the range of our experimental conditions the results of plasma density, for both gases, tend to show that the ion densities measured with the OML and Laframboise theories exceeds the measured electron densities. The results also show that the plasma electron and ion densities increased with both discharge power and gas pressure.     

Plasma characteristics and broadband electromagnetic wave absorption in argon and helium capacitively coupled plasma

A one-dimensional self-consistent calculation model of capacitively coupled plasma(CCP) discharge and electromagnetic wave propagation is developed to solve the plasma characteristics and electromagnetic wave transmission attenuation.Numerical simulation results show that the peak electron number density of argon is about 12 times higher than that of helium, and that the electron number density increases with the augment of pressure, radio frequency(RF) power, and RF frequency. However, the electron number density first increases and then decreases as the discharge gap increases. The transmission attenuation of electromagnetic wave in argon discharge plasma is 8.5-d B higher than that of helium. At the same time, the transmission attenuation increases with the augment of the RF power and RF frequency, but it does not increase or decrease monotonically with the increase of gas pressure and discharge gap. The electromagnetic wave absorption frequency band of the argon discharge plasma under the optimal parameters in this paper can reach the Ku band. It is concluded that the argon CCP discharge under the optimal discharge parameters has great potential applications in plasma stealth.     

Changes in Properties of Dielectric Barrier Discharge Plasma Jets for Different Gases and for Insulating and Conducting Transfer Plates

Dielectric barrier discharge (DBD) plasma jets have been studied extensively in recent years because of its wide range of applications. DBD plasmas can be produced using many different gases and can be applied to a broad variety of surfaces and substrates. This work provides comparisons of DBD plasmas generated using argon (Ar), helium (He), and nitrogen (N₂), as well as their mixtures with water vapor in order to know how some plasma properties are affected by the use of different gases. All plasmas were studied in two different conditions: using a transfer plate made of a conductive material and using a transfer plate made of an insulating one. It was observed that the process of Penning ionization of nitrogen molecules by direct collisions with metastable atoms and molecules is evident and significant only in plasmas that use He as the working gas, which means that He atoms in metastable states have greater ability to transfer energy to molecules of nitrogen in the plasma. The collisions of metastable He with N₂ molecules determine the vibrational temperature (T _vib) values in He plasmas, while in Ar and N₂ plasmas, the T _vib values are determined mainly by collisions of electrons with N₂ molecules. It was noticed that the use of an insulating or a conducting transfer plate as the sample holder affects the results of adhesion between poly(dimethylsiloxane) samples, and it is mainly due to the differences in the plasma power, with a higher plasma power leading to better adhesion.     

Emission properties of apokamp discharge at atmospheric pressure in air,argon, and helium

Emission spectra of the plasma jet of apokamp discharge in air, helium, and argon are studied. Apokamp at atmospheric pressure is formed in the areas of strengthening of the electric field near the bends in the channel of the pulse-periodic discharge and is directed perpendicularly to the discharge channel. Apokamp consists of a bright narrow “appendage” connected with the discharge channel and with the diffuse jet emerging from the channel. It is shown that, in helium, the emission of the diffuse part of apokamp is dominated by N₂ and N₂ ⁺, while emission of the “appendage” display lines and bands of He, N₂, N₂ ⁺, O, and OH. In argon, emission spectra of the diffuse part of the plasma jets contain not only N₂ and N₂ ⁺, but also Ar lines. It is assumed that the surrounding air plays an important role in the formation of the diffuse part of apokamp in helium and argon.     

A Calculation of the Electron Temperature of Complex Plasma of Noble Gases Mixture in CCRF Discharge

In this paper the results of studying of the electron temperature of buffer and complex plasmas in mixtures of noble gases (helium + argon) in capacitively coupled radiofrequency (CCRF) discharge are presented. The optical properties of dusty plasma in argon, helium and their mixtures have been studied using optical diagnostic methods. Based on spectral lines of plasma forming gases, the dependence of the electron temperature on gas pressure and discharge power has been determined. The axial distribution of electron temperature in the interelectrode gap has been measured. Measurements have been made using an RF compensated electric probe. The comparison of the experimental results shows that admixture of a small amount of argon to helium leads to a decrease in the electron temperature of buffer plasma. The presence of dust particles in the plasma causes an increase in the electron temperature. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

大气压下石英毛细管内氩等离子体放电的发射光谱诊断

在长度为20 cm的石英毛细管内利用两个边缘锋利的中空的针型电极之间的氩气放电产生了高电子密度的大气压等离子体。利用发射光谱对所获得的等离子体的几个重要参数进行了诊断。利用计算机谱线拟合法合成了300 nm附近OH(A-X)的(0-0)转动谱带并通过与测量谱线的比较确定了等离子体的气体温度,根据H_β谱线Stark展宽法计算了等离子体的电子密度,采用玻尔兹曼曲线斜率法依据测得的有关氩的发射光谱估算了等离子体的电子温度。研究结果表明,这种石英毛细管内弧光放电等离子体的气体温度约为(1 100±50)K;电子密度数量级在1014 cm-3;电子温度约为(14 515±500)K。     

Electron temperature determination in LTE and non-LTE plasmas

A method is presented for calculating electron temperatures (T_e) in dense plasmas, which does not assume equivalence with the excited level distribution temperatures (T_ex). The method involves the upper-level Saha ionization equation at the ionization limit, the limiting weighted population density (N_I/g_I) obtained from measured population densities and the experimentally obtained electron density. Electron temperatures calculated for 0.1-bar hydrogen and 1-atm helium and argon arcs are found to be up to twice as large as excited level distribution temperatures. For subatmospheric argon arcs, the calculated T_e are equivalent to the excitation temperature of the middle levels, but are two to three times smaller than the quoted T_ex for the highest levels. Reasons are discussed for the apparent invisibility of true electron temperatures and for differences between them and the excitation temperatures.     

大气压低温氦等离子体射流的诊断研究

为了加快低温氦气等离子体射流的工程化进程,通过自主设计的同轴式介质阻挡放电等离子体射流发生器,在放电频率10 kHz,一个大气压条件下产生了稳定的氦气等离子体射流。通过分析不同工况下的电压电流波形可以发现单纯增加氦气体积流量只能小幅的增加电流脉冲幅值,而对放电时间、电流脉冲数的影响不大。增加放电峰值电压时电流脉冲幅值会得到较大幅度增加。通过发射光谱法对大气压氦气等离子射流的活性粒子种类、电子激发温度、电子密度进行了诊断。结果表明,大气压氦气等离子体射流中的主要活性粒子为He Ⅰ原子、N₂第二正带系、N+₂的第一负带系、羟基（OH）,H原子的巴尔末线系（H_α和H_β）与O原子,这表明虽然该试验中使用的氦气纯度已达99.99%,但其中仍残留有少量的空气,同时放电时大气中的空气会被卷吸到放电空间发生电离。还可以发现,主要活性粒子的相对光谱强度随氦气体积流量的增加及放电峰值电压的增大均呈现上涨的趋势。选用He Ⅰ原子的四条谱线对不同试验工况下的电子激发温度进行了计算,得到大气压氦气等离子体射流的电子激发温度在3 500~6 300 K之间,电子激发温度随放电峰值电压与氦气体积流量的增大总体上呈现上升的趋势。但由于反向电场的存在,某些峰值电压可能会出现电子激发温度下降的情况;根据Stark展宽原理对大气压氦气等离子体射流的电子密度进行了计算,发现电子密度的数量级可达1015 cm-3,同时增大峰值电压与氦气体积流量均可有效的提高射流中的电子密度。这些参数的研究对氦气等离子体射流在工程实际中的应用具有重要意义。