Functionalization of polymeric organolithium compounds with 3,4‐epoxy‐1‐butene: Precursors for diene‐functionalized macromonomers

The functionalization of polymeric organolithiums (PLi) with 3,4‐epoxy‐1‐butene (EPB) in a hydrocarbon solution yielded the corresponding hydroxybutene‐functionalized polymers in high yields (>95%). Three modes of addition of PLi to EPB were observed (1,4, 3,4, and 4,3). The products and chain‐end structures were characterized by ¹H NMR, ¹³C NMR, attached‐proton‐test ¹³C NMR, calculated ¹³C NMR chemical shifts, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). The regioselectivity of the addition depended on the PLi chain‐end structure, the reaction conditions, and the addition of lithium salts or Lewis bases. In the absence of additives, the functionalization of poly(styryl)lithium (PSli) produced equal amounts of 1,4‐, 3,4‐, and 4,3‐addition, as determined by quantitative ¹³C NMR analysis. The use of a low temperature (6 °C), inverse addition, the addition of triethylamine (TEA; [TEA]/[PSLi] = 20) as a Lewis base, or dienyllithium chain ends produced polymers with only the 1,4‐addition product. Mild dehydration of the hydroxybutene‐functionalized polymer with p‐toluenesulfonic acid produced the corresponding diene‐functionalized macromonomer, as shown by MALDI‐TOF MS. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 947–957, 2003     

Anionic synthesis and characterization of ω‐carboaldehyde‐functionalized polybutadienes and polyisoprenes

Attempted preparation of ω‐formyl‐functionalized polydienes by termination of poly(butadienyl)lithium and poly(isoprenyl)lithium with 4‐morpholinecarboaldehyde resulted in 73 and 38% dimer formation (SEC), respectively, under conditions that quantitativey produced ω‐formyl‐functionalized polystyrene. Dimer formation was attributed to postfunctionalization, base‐catalyzed, aldol‐type condensation based on FTIR and ¹H‐NMR analysis of the dimer products. High yields (>97%) of ω‐formyl‐functionalized polydienes were formed by workup using acidic methanol; quantitative functionalization resulted from end capping the polymeric organolithium chain ends with 1,1‐diphenylethylene prior to the functionalization reaction. The ω‐formylpolydienes were characterized by hydroxylamine end‐group titration, FTIR, and both ¹H‐ and ¹³C‐NMR spectroscopy. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1143–1156, 1999     

Quantitative amine functionalization of polymeric organolithium compounds with 3‐dimethylaminopropyl chloride in the presence of lithium chloride

The addition of lithium chloride promoted the coupling reaction of hydrocarbon solutions of poly(styryl)lithium (PSLi) and poly(isoprenyl)lithium (PILi) with 3‐dimethylaminopropyl chloride to form the corresponding ω‐dimethylamino‐functionalized polymers. Quantitative amine functionalization was achieved for PSLi and PILi in the presence of 1 and 10 equivalents, respectively, of LiCl in benzene; the functionalization efficiency was only 67% for PSLi and 85% for PILi in the absence of LiCl. The polymer products were characterized by size exclusion chromatography, thin‐layer chromatography, and amine end‐group titration. The pure amine‐functionalized polymers were isolated by silica gel column chromatography. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 145–151, 2000     

Facile postpolymerization end‐modification of RAFT polymers

One‐pot methods for the end‐group postpolymerization modification of reversible addition fragmentation chain transfer (RAFT) derived polymers were investigated. Dithioester‐terminated polymers were transformed into ω‐functionalized polymers through conjugate addition of a variety of acrylates with an intermediate thiol. These methods provide a versatile means of introducing a variety of functionalities onto the polymer terminus, while simultaneously removing the residual dithiobenzoate group. A series of functionalized polymethylmethacrylate‐b‐polystyrene (PMMA‐b‐PS) polymers were synthesized utilizing the developed methods to probe the effect of charged end groups on diblock copolymer phase separation in thin films. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 346–356, 2009     

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectroscopic analysis of telechelic polythiourethanes obtained by the cationic ring‐opening polymerization of six‐membered cyclic thiourethane

A matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectroscopy analysis of polythiourethanes obtained by the cationic ring‐opening polymerization of a six‐membered cyclic thiourethane [3‐benzyltetrahydro‐1,3‐oxazine‐2‐thione (BTOT)] is described. A MALDI‐TOF mass spectrum of a polymer obtained by the polymerization of BTOT with boron trifluoride etherate (BF₃OEt₂) as the initiator in nitrobenzene at 50 °C for 24 h followed by an end‐capping reaction with diethyldithiocarbamic acid diethylammonium salt showed a series of well‐resolved signals that were assignable to polythiourethanes possessing an amino group at the initiating end and a diethyldithiocarbamate group at the terminating end. In comparison with the MALDI‐TOF mass spectra of polymers obtained by polymerization with trifluoromethanesulfonic acid or methyl trifluoromethanesulfonate, the plausible initiating species in the polymerization with BF₃OEt₂ was estimated to be a proton, which successively eliminated carbonyl sulfide to produce a secondary amine group at the initiating end. The secondary amine group in the obtained telechelic polymer was converted to a tertiary amine group by a reaction with benzyl bromide in the presence of triethylamine, and this was confirmed by MALDI‐TOF mass spectroscopy. Furthermore, a telechelic polymer with a pyrrole end group was successfully synthesized by the end‐capping reaction of the growing species in the polymerization of BTOT with sodium 1‐pyrrolecarbodithioate. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4281–4289, 2006     

Facilitating polymer conjugation via combination of RAFT polymerization and activated ester chemistry

The synthesis of block copolymers via polymer conjugation of well‐defined building blocks offers excellent control over the structures obtained, but often several coupling strategies need to be explored to find an efficient one depending on the building blocks. To facilitate the synthesis of polymers with adjustable functional end‐groups for polymer conjugation, we report on the combination of activated ester chemistry with RAFT polymerization using a chain transfer agent (CTA) with a pentafluorophenyl ester (PFP‐CTA), which allows for flexible functionalization of either the CTA prior to polymerization or the obtained polymer after polymerization. Different polymethacrylates, namely PMMA, P(t‐BuMA) and PDEGMEMA, were synthesized with an alkyne‐CTA obtained from the aminolysis of the PFP‐CTA with propargylamine, and the successful incorporation of the alkyne moiety could be shown via ¹H and ¹³C NMR spectroscopy and MALDI TOF MS. Further, the reactive α‐end‐groups of polymers synthesized using the unmodified PFP‐CTA could be converted into azide and alkyne end‐groups after polymerization, and the high functionalization efficiencies could be demonstrated via successful coupling of the resulting polymers via CuAAC. Thus, the PFP‐CTA allows for high combinatory flexibility in polymer synthesis facilitating polymer conjugation as useful method for the synthesis of block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of dendritic carbohydrate end‐functional polymers via RAFT: Versatile multi‐functional precursors for bioconjugations

Well‐defined pyridyl disulfide (PDS) end‐functionalized polymer‐dendritic carbohydrate scaffolds are reported as novel precursors for the attachment of biomolecules. This synthetic approach combines reversible addition fragmentation chain transfer (RAFT) polymerization and “click” reactions. Poly(N‐(2‐hydroxypropyl) methacrylamide) (PHPMA) with 2‐mercaptothiozalidine end‐groups was prepared by RAFT polymerization yielding molecular weights of M_n = 4300 and 9900, both with a polydispersity of less than 1.2. These polymers were then attached to dendritic mannose scaffolds preconstructed via consecutive “click” reactions. Finally, the ω‐dithiobenzoate RAFT end‐group of PHPMA was modified to yield PDS functionality, by aminolysis in the presence of 2,2′‐dithiodipyridine. This PDS end‐functionalized PHPMA‐dendritic carbohydrate scaffold is a versatile precursor for bioconjugations, as the synthetic procedure can easily accommodate a range of sugar functionalities. In addition, the PDS groups can be used to react with any thiol present in a biomolecule (e.g., cysteine residue in proteins, or ? SH terminal nucleotides). To demonstrate the utility of these scaffolds we describe their bioconjugation to short interfering RNA. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4302–4313, 2009     

Thiophenol derivatives as a reducing agent for in situ generation of Cu(I) species via electron transfer reaction in copper‐catalyzed living/controlled radical polymerization of styrene

The copper‐catalyzed living radical polymerization (LRP) of styrene (St) was carried out in the presence of thiophenol derivative such as sodium thiophenolate (PhSNa) or p‐methoxythiophenol as a reducing agent for Cu(II) by using either 1‐chloro‐1‐phenyl ethane or ethyl‐2‐bromoisobutyrate as an initiator and N,N,N′,N″,N″‐pentamethyldiethylenetriamine as ligand at 110 °C. Kinetic experiments were carried out to reveal the effect of PhSNa concentration on copper‐catalyzed LRP of St. This technique was successfully applied for the preparation of both chain‐extended polymer and block copolymer polystyrene‐b‐poly(methyl methacrylate). The obtained polymers were characterized using GPC, ¹H‐NMR, and MALDI‐TOF measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5923–5932, 2006     

Cyclic and telechelic ladder polymers derived from tetrahydroxytetramethylspirobisindane and 1,4‐dicyanotetrafluorobenzene

5,5′,6,6′‐Tetrahydroxy‐3,3,3′,3′‐tetramethylspirobisindane was polycondensed with 1,4‐dicyanotetrafluorobenzene in four different solvents at 70 °C. In dimethylformamide, N‐methylpyrrolidone, and sulfolane exclusively, cyclic polymers were detectable by matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry up to masses around 13,000 Da. In dimethyl sulfoxide, linear byproducts were also found. Higher temperatures caused degradation reactions catalyzed by potassium carbonate. Polycondensations performed with the addition of 4‐tert‐butyl catechol or 2,2′‐dihydroxy binaphthyl yielded linear telechelic oligomers. Equimolar mixtures of linear and cyclic ladder polymers were examined by MALDI‐TOF mass spectra to determine how the end groups and the cyclic structure influenced the signal‐to‐noise ratio. The results suggested a preferential detection of the linear chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5344–5352, 2006     

Synthesis of end‐functionalized poly(phenylacetylene)s with well‐characterized palladium catalysts

End‐functionalized poly(phenylacetylene)s were synthesized by the polymerization of phenylacetylene (PA) using the well‐defined palladium catalysts represented as [(dppf)PdBr(R)] {dppf = 1,1′‐bis(diphenylphosphino)ferrocene}. The Pd catalysts having a series of R groups such as o‐tolyl, mesityl, C(Ph)?CPh₂, C₆H₄‐o‐CH₂OH, C₆H₄‐p‐CN, and C₆H₄‐p‐NO₂ in conjunction with silver triflate polymerized PA to give end‐functionalized poly(PA)s bearing the corresponding R groups in high yields. The results of IR and NMR spectroscopies and MALDI‐TOF mass analyses proved the introduction of these R groups at one end of each polymer chain. The poly(PA) bearing a hydroxy end group was applied as a macroinitiator to the synthesis of a block copolymer composed of poly(PA) and poly(β‐propiolactone) moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of polyoxazolines using glycerol carbonate derivative and end chains functionalization via carbonate and isocyanate routes

We report the cationic ring‐opening polymerization of 2‐methyl‐2‐oxazoline (MOx) using bio‐based initiator (GCTs). The functional initiator GCTs was prepared by tosylation of the corresponding alcohol: glycerol carbonate (GC). The termination stage of the polymerization was achieved in presence of KOH and the telechelic polyoxazoline carrying five‐membered cyclic carbonate and oxazolium end groups (GC‐POx^ium) was converted to ((HO)₂‐POx‐OH) carrying α‐diol and ω‐hydroxyl groups. End‐functionalized polyoxazolines (HO)₂‐POx‐OH with M_n ranging from 4200 to 8400 g mol^?1 were synthesized. According to GPC results, the polymerizations of MOx using GCTs and other initiator coming from 1,2‐isopropylidene‐glycerol (Solk‐Ts) were compared. On the basis of FTIR and NMR spectroscopies, the chemical modification of end chains of polyoxazolines was investigated by two alternative synthetic routes. The isocyanate route is a postpolymerization urethanization. The nucleophilic reactivity of the α‐diol and ω‐hydroxyl groups of (HO)₂‐POx‐OH was studied with functional isocyanate (TESPI). In the carbonate route, the electrophilic reactivity of α‐ and ω‐end groups of GC‐POx^ium were explored with amine. It was demonstrated that during the termination stage of the polymerization in presence of allylamine both urethane linker in α‐end chain was synthesized and the ω‐oxazolium group was converted into terminal amine. The carbonate route is an alternative to synthesize urethane without isocyanate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4027–4035, 2010     

End‐group functionalization and postpolymerization modification of helical poly(isocyanide)s

This contribution presents the synthesis of helical alkyne‐terminated polymers using a functionalized Nickel complex to initiate the polymerization of menthylphenyl isocyanides. The resulting polymers display low dispersities and controlled molecular weights. Copper‐catalyzed azide/alkyne cycloadditions (CuAAC) are performed to attach various azide‐containing compounds to the polymer termini. After azido‐phosphonate moiety attachment the polymer displays a signal at 25.4 ppm in the ³¹P NMR spectrum demonstrating successful end‐group functionalization. End‐group functionalization of a fluorescent dye allows to determine the functionalization yield as 89% (±8). Successful ligation of an azide‐functionalized peptide sequence (M_KLA = 1547 g/mol) increases the M_n from 5100 for the parent polymer to 6700 for the bioconjugate as visualized by GPC chromatography. Analysis by CD spectroscopy confirms that the helical conformation of the poly(isocyanide) block in the peptide–polymer conjugate is maintained after postpolymerization modification. These results demonstrate an easy, generalizable, and versatile strategy toward mono‐telechelic helical polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2766–2773     

Synthesis of well‐defined macromonomers by the combination of atom transfer radical polymerization and a click reaction

This article presents a new strategy for synthesizing a series of well‐defined macromonomers. Bromine‐terminated polystyrene and poly(t‐butyl acrylate) with predetermined molecular weights and narrow distributions were prepared through the atom transfer radical polymerization of styrene and t‐butyl acrylate initiated with ethyl 2‐bromoisobutyrate. Then, azido‐terminated polymers were obtained through the bromine substitution reaction with sodium azide. Catalyzed by CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine, the azido end group reacted with propargyl methacrylate via a 1,3‐dipolar cycloaddition reaction, and ω‐methacryloyl‐functionalized macromonomers were thus obtained. The end‐group transformation yields were rather high, as characterized by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra and ¹H NMR analysis. By this effective and facile approach, some novel macromonomers that otherwise are difficult to achieve, such as poly(ethylene oxide)‐block‐polystyrene, were easily prepared. Radical homopolymerizations of these macromonomers were performed, and a series of comb polymers were prepared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6103–6113, 2006     

Laser‐induced decomposition of 2,2‐dimethoxy‐2‐phenylacetophenone and benzoin in methyl methacrylate homopolymerization studied via matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Pulsed laser polymerization (PLP) experiments were performed on the bulk polymerization of methyl methacrylate (MMA) at ?34 °C. The aim of this study was to investigate the polymer end groups formed during the photoinitiation process of MMA monomer using 2,2‐dimethoxy‐2‐phenylacetophenone (DMPA) and benzoin as initiators via matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry. Analysis of the MALDI‐TOF spectra indicated that the two radical fragments generated upon pulsed laser irradiation show markedly different reactivity toward MMA: whereas the benzoyl fragment—common to both DMPA and benzoin—clearly participates in the initiation process, the acetal and benzyl alcohol fragments cannot be identified as end groups in the polymer. The complexity of the MALDI‐TOF spectrum strongly increased with increasing laser intensity, this effect being more pronounced in the case of benzoin. This indicates that a cleaner initiation process is at work when DMPA is used as the photoinitiator. In addition, the MALDI‐TOF spectra were analyzed to extract the propagation‐rate coefficient, k_p, of MMA at ?34 °C. The obtained value of k_p = 43.8 L mol^?1 s^?1 agrees well with corresponding numbers obtained via size exclusion chromatography (k_p = 40.5 L mol^?1 s^?1). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 675–681, 2002; DOI 10.1002/pola.10150     

Synthesis of phenanthroline‐terminated polymers and their Fe(II)‐complexes

Well‐defined mono‐ and bifunctional, phenanthroline‐terminated poly(ethylene glycol) and polyisobutylene capable of polymer network formation were synthesized. The starting materials mono‐ and bi‐phenanthroline‐ (phen) terminated poly(ethylene glycols) (mPEG‐phen, phen‐PEG‐phen) and polyisobutylenes (PIB‐phen, phen‐PIB‐phen) were prepared by the Williamson synthesis and characterized by means of ¹H NMR and MALDI‐TOF mass spectrometry. According to UV–Vis spectrophotometry and ESI‐TOF mass spectrometry, the phenanthroline‐terminated polymers underwent quantitative complex formation with ferrous ions in solution. The aqueous solution of mPEG‐phen shows self‐assembly behavior. Important parameters, such as critical micelle concentration and hydrodynamic radius of the aggregates were also determined. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2709–2715, 2010     

Synthesis of aromatic oxazolyl‐ and carboxyl‐functionalized polymers: Atom transfer radical polymerization of styrene initiated by 2‐[(4‐bromomethyl)phenyl]‐4,5‐dihydro‐4,4‐dimethyloxazole

The synthesis of a new compound, 2‐[(4‐bromomethyl)phenyl]‐4,5‐dihydro‐4,4‐dimethyloxazole ( 1 ), and its utility in the synthesis of oxazoline‐functionalized polystyrene by atom transfer radical polymerization (ATRP) methods are described. Aromatic oxazolyl‐functionalized polymers were prepared by the ATRP of styrene, initiated by ( 1 ) in the presence of copper(I) bromide/2,2′‐bipyridyl catalyst system, to afford the corresponding α‐oxazolyl‐functionalized polystyrene ( 2 ). The polymerization proceeded via a controlled free radical polymerization process to produce the corresponding α‐oxazolyl‐functionalized polymers with predictable number‐average molecular weights, narrow molecular weight distributions in high‐initiator efficiency reactions. Post‐ATRP chain end modification of α‐oxazolyl‐functionalized polystyrene ( 2 ) to form the corresponding α‐carboxyl‐functionalized polystyrene ( 3 ) was achieved by successive acid‐catalyzed hydrolysis and saponification reactions. The polymerization processes were monitored by gas chromatography analyses. The unimolecular‐functionalized initiator and functionalized polymers were characterized by thin layer chromatography, spectroscopy, size exclusion chromatography, and nonaqueous titration analysis. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Structure of poly(L‐lactic acid)s prepared by the dehydropolycondensation of L‐lactic acid with organotin catalysts

The synthesis of low‐molecular‐weight (weight‐average molecular weight < 45,000 g/mol) lactic acid polymers through the dehydropolycondensation of L ‐lactic acid was investigated. Polymerizations were carried out in solution with solvents (xylene, mesitylene, and decalin), without a solvent using different Lewis acid catalysts (tetraphenyl tin and tetra‐n‐butyldichlorodistannoxane), and at three different polymerization temperatures (143, 165, and 190 °C). The products were characterized with differential scanning calorimetry, size exclusion chromatography, vapor pressure osmometry, ¹³C NMR, and matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF). The resulting polymers contained less than 1 mol % lactide, as shown by NMR. The number‐average molecular weights were calculated from the ratio of the area peaks of ester carbonyl and carboxylic acid end groups via ¹³C NMR. The stereosequences were analyzed by ¹³C NMR spectroscopy on the basis of triad effects. Tetraphenyl tin was an effective transesterification catalyst, and the randomization of the stereosequence at 190 °C was observed. In contrast, the distannoxane catalyst caused comparatively less transesterification reaction, and the randomization of the stereosequences was slow even at 190 °C. The L ‐lactic acid and D ‐lactic acid isomers were added to the polymer chain in a small, blocky fashion. The MALDI‐TOF spectra of poly(L ‐lactic acid) (PLA) chains doped with Na⁺ and K⁺ cations showed that the PLA chains had the expected end groups. The MALDI‐TOF analysis also enabled the simultaneous detection of the cyclic oligomers of PLA present in these samples, and this led to the full structural characterization of the molecular species in PLA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2164–2177, 2005     

Modular synthesis of ABC type block copolymers by “click” chemistry

Heterotelechelic polystyrene (PS), poly(tert‐butyl acrylate) (PtBA), and poly (methyl acrylate) (PMA), containing both azide and triisopropylsilyl (TIPS) protected acetylene end groups, were prepared in good control (M_w/M_n ≤ 1.24) by atom transfer radical polymerization (ATRP). The end groups were independently applied in two successive “click” reactions, that is: first the azide termini were functionalized and, after deprotection, the acetylene moieties were utilized for a second conjugation step. As a proof of concept, PS was consecutively functionalized with propargyl alcohol and azidoacetic acid, as confirmed by MALDI‐ToF MS. In addition, the same methodology was employed to modularly build up an ABC type triblock terpolymer. Size exclusion chromatography measurements demonstrated first coupling of PtBA to PS and, after the deprotection of the acetylene functionality on PS, connection of PMA, yielding a PMA‐b‐PS‐b‐PtBA triblock terpolymer. The reactions were driven to completion using a slight excess of azide functionalized polymers. Reduction of the residual azide groups into amines allowed easy removal of this excess of polymer by column chromatography. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2913–2924, 2007     

End‐functionalization of syndiotactic polystyrene by vinylsilane inducing selective chain transfer reactions

Structurally well‐defined end‐functionalized syndiotactic polystyrene (sPS) can be prepared by conducting a simultaneous selective chain transfer reaction during the syndiospecific polymerization of styrene in the presence of vinylsilanes. The production of vinylsilane end‐capped sPS involves a unique selective chain transfer pathway via the incorporation of a terminal vinylsilane unit at the polymer chain end by 2,1‐insertion. This unusual insertion pattern situates the bulky silyl functional group at a closer β‐position from the active catalyst center, thus deactivating the propagating chain by a steric jam between the vinylsilane end group and the active catalyst. Subsequently, chain releasing by hydrogen addition (in the presence of H₂) or by β‐elimination (in the absence of H₂) can take place, which leads to the production of end‐functionalized sPS with precise controls of stereoregularity and of the location of functionality. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1690–1698, 2010     

Diselenocarbamates,novel initiators in ATRP of styrene

The atom transfer radical polymerizations (ATRPs) of styrene initiated by diselenocarbamates were carried out for the first time. The polymerization showed first‐order kinetic with respect to the monomer concentration, and the molecular weights of the obtained polymers increased linearly with the monomer conversions with narrow molecular weight distributions (as low as 1.16). The results of chain extension, ¹H NMR, UV–vis, and MALDI‐TOF MS confirmed that the resultant polystyrene possessed some degree of living diselenocarbamates terminal. However, significant amounts of dead polymers (about 53%) were also found. This work offered an alternative type of ATRP initiator, and the seleno‐terminated polymers may be useful in biotechnological and biomedical applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1927–1933