Theoretical study of polyoxide clusters B20O30, Al20O30, V20O50, Si20O30H20, and Si20O30F20

The structural, electronic, and vibrational characteristics and energies of the isolated polyoxide clusters B₂₀O₃₀, Al₂₀O₃₀, V₂₀O₅₀, Si₂₀O₃₀H₂₀, and Si₂₀O₃₀F₂₀ and their complexes with the H⁻ ion and ammonia complexes Al₂₀O₃₀ · nNH₃ have been calculated by the density functional theory B3LYP method with different basis sets. The computation results show that the symmetric closo structure I _h with oxygen bridges located above the centers of the faces of an empty [M₂₀] dodecahedron is more favorable for V₂₀O₅₀, Si₂₀O₃₀H₂₀, and Si₂₀O₃₀F₂₀. For B₂₀O₃₀, the cage closo isomer is also more favorable than the other isomers, but its structure is severely distorted as compared to a dodecahedron and has a symmetry close to C ₃ . For Al₂₀O₃₀, the I _h structure corresponds to a high-lying local minimum of the potential energy surface. For Al₂₀O₃₀, a set of unusual puckshaped isomers of symmetry C _i , with different numbers of four-coordinate atoms ^IVAl and three-coordinate atoms ^IIIO, was localized; these structures are more than 90 kcal/mol more favorable than the dodecahedron I _h . The most favorable isomer of Al₂₀O₃₀ contains twelve four-coordinate atoms ^IVAl and four five-coordinate atoms ^VAl. The energies of dissociation of the most favorable M₂₀O₃₀ clusters into the M₂O₃ (C _2v ) and M₄O₆ (T _d ) fragments and, in the case of Al₂₀O₃₀, also into the Al₈O₁₂ (O _h ) and Al₁₂O₁₈ (D _3d ) fragments, have been estimated. The conclusion has been drawn that these clusters can, in principle, exist and can be experimentally detected in the isolated state. Analogous calculations have been performed for ammonia complexes Al₂₀O₃₀ · nNH₃ with n varying from 1 to 20. The effect of solvation on the relative stability of the dodecahedral and puckshaped isomers of the Al₂₀O₃₀ cluster is observed. The isomers with ammonia molecules in their first coordination sphere become much closer to one another on the energy scale; however, the dodecahedron remains a considerably less favorable intermediate. Original Russian Text ? O.P. Charkin, N.M. Klimenko, D.O. Charkin, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 4, pp. 624–635.     

Syntheses, structures, optical properties, and theoretical calculations of Cs2Bi2ZnS5, Cs2Bi2CdS5, and Cs2Bi2MnS5

Three new compounds, Cs₂Bi₂ZnS₅, Cs₂Bi₂CdS₅, and Cs₂Bi₂MnS₅, have been synthesized from the respective elements and a reactive flux Cs₂S₃ at 973 K. The compounds are isostructural and crystallize in a new structure type in space group Pnma of the orthorhombic system with four formula units in cells of dimensions at 153 K of a=15.763(3), b=4.0965(9), c=18.197(4) Å, V=1175.0(4) Å³ for Cs₂Bi₂ZnS₅; a=15.817(2), b=4.1782(6), c=18.473(3)  Å, V=1220.8(3)  ų for Cs₂Bi₂CdS₅; and a=15.830(2), b=4.1515(5), c=18.372(2) Å, V=1207.4(2) Å³ for Cs₂Bi₂MnS₅. The structure is composed of two-dimensional _∞²[Bi₂MS₅²⁻] (M=Zn, Cd, Mn) layers that stack perpendicular to the [100] axis and are separated by Cs⁺ cations. The layers consist of edge-sharing _∞¹[Bi₂S₆⁶⁻] and _∞¹[MS₃⁴⁻] chains built from BiS₆ octahedral and MS₄ tetrahedral units. Two crystallographically unique Cs atoms are coordinated to S atoms in octahedral and monocapped trigonal prismatic environments. The structure of Cs₂Bi₂MS₅, is related to that of Na₂ZrCu₂S₄ and those of the AMM′Q₃ materials (A=alkali metal, M=rare-earth or Group 4 element, M′= Group 11 or 12 element, Q=chalcogen). First-principles theoretical calculations indicate that Cs₂Bi₂ZnS₅ and Cs₂Bi₂CdS₅ are semiconductors with indirect band gaps of 1.85 and 1.75 eV, respectively. The experimental band gap for Cs₂Bi₂CdS₅ is ≈1.7 eV, as derived from its optical absorption spectrum.     

Lithium intercalation into PbNb2S5, PbNbS3, SnNb2Se5, BiVS3, SnVSe3, and PbNb2Se5 misfit layer chalcogenides

The intercalation of lithium into various misfit layer chalcogenides of two different stoichiometries was performed by using n-butyl lithium on powders. The reaction was found to proceed topochemically, and a greater expansion in the c direction and higher lithium contents were observed in the lithiated phases with “MM′₂X₅” approximate stoichiometries compared to “MM′X₃” stoichiometries. This behaviour difference is assigned to the different stacking sequence of the slices of the two sublattices formed by double layers of MX and sandwiches of M′X₂. Lattice distortions are induced during lithiation, leading to changes in the relative orientation of MS-type bilayers and to complete amorphization after long reaction times. The synthesis and partial characterization of a new misfit layer selenide of nominal composition “PbNb₂Se₅” is also reported. The value of the c-dimension (c = 37.3₇ Å) suggests a stacking sequence PbSe---NbSe₂---NbSe₂---PbSe---NbSe₂---NbSe₂, etc. This material becomes highly unstable on lithium intercalation and decomposes to its constituents after a few hours of lithiation.     

Theoretical study of polyoxide clusters Sc20O30, P20O50, Ti20O30F20, and V20O30F20

The structural, electronic, and vibrational characteristics and energies of the isolated polyoxide clusters Sc₂₀O₃₀, P₂₀O₅₀, Ti₂₀O₃₀F₂₀, and V₂₀O₃₀F₂₀ and ammonia complexes Sc₂₀O₃₀ · nNH₃ were calculated by the density functional theory B3LYP method with several basis sets. The computation results show that a fullerene-like closo structure I _h with oxygen bridges located above the midpoints of the edges of an empty [M₂₀] dodecahedron is preferable for the Ti₂₀O₃₀F₂₀ and V₂₀O₃₀F₂₀ clusters with four-coordinate metal atoms protected by the outer M-F bonds. This structure with a cage diameter of ∼1 nm and the diameter of nearly planar decagonal faces (windows) of ∼0.5 nm is stable to dissociation into fragments and to strong geometric distortions and retains its closo shape when molecules like NH₃ and anions like H⁻ are attached to the cage. An analogous closo structure is favorable for the P₂₀O₅₀ cluster; however, in this structure, the [P₂₀] cage is severely distorted and all 12 windows are strongly corrugated. For Sc₂₀O₃₀, the I _h dodecahedron with bare three-coordinate Sc atoms corresponds to a local minimum of the potential energy surface, which is 170–200 kcal/mol less favorable than compact puck-shaped isomers in which four- and five-coordinate metal atoms and three- and four-coordinate oxygen atom prevail. “Solvation” of the dodecahedral and puck-shaped Sc₂₀O₃₀ isomers by ammonia molecules strongly decreases the energy gap between the isomers; however, the dodecahedron I _h in all cases remains a high-lying intermediate. According to calculations, most polyoxides under consideration have a high electron affinity (comparable with or higher than that of fullerenes) and is able to add three to five or more alkali-metal atoms to form radical salts in which clusters are in the state of polyanions. Because of large sizes of the [M₂₀] cages and their windows, the interior of the cage (as distinct from fullerenes) can accommodate a considerable number of atoms and several small molecules. The V₂₀O₃₀F₂₀ cluster has 20 unpaired electrons and can be treated as a molecular magnet. The properties of the [M₂₀] cages depend only slightly on the outer substituents. It is suggested that the pattern will be retained upon the substitution of OH groups for the F atoms and that the hydroxo-substituted clusters can bind to each other through hydrogen bridges and serve as building blocks for self-assembly into ordered nanometer and crystalline structures of various dimensions. Original Russian Text ? O.P. Charkin, N.M. Klimenko, D.O. Charkin, 2009, published in Zhurnal Neorganicheskoi Khimii, 2009, Vol. 54, No. 5, pp. 775–785.     

Zur Trennung von H2, O2, N2, NO, CO, N2O, CO2, C2H6, C2H4, C2H2, NO2(N2O4) und Feuchtigkeit

Ohne Zusammenfassung     

Ionization gauge sensitivities of N2, O2, N2O, NO, NO2, NH3, CClF3 and CH3OH

A Bayard-Alpert (BA) gauge was used to determine apparent relative sensitivites S_rel,X for O₂, N₂O, NO, NO₂, NH₃, CClF₃ and CH₃OH from gauge calibration measurements in the range 1.3×10^–1 Pap1.3·10^–3Pa. Nitrogen was used as a calibration standard.     

Ab Initio calculation of molecular, thermodynamic, and kinetic parameters of CF, CF2, CF3, and C2F5 radicals and CF4, CF3I, C2F4, and C2F6 molecules in gas

Enthalpies of formation of ground states of the gaseous particles CF, CF₂, C₂F₅, CF₄, CF₃I, C₂F₄, and C₂F₆ were calculated by ab initio method in the CCSD(T) approximation with extrapolation to the full basis and regard to the correlation energy. Their equilibrium geometrics, frequencies of normal vibrations, and other values were found by the B3LYP/aug-cc-pvdz method, from which thermodynamic functions within the range of 0–6000 K were calculated. Equilibrium constants were calculated from these functions, and then the information on the rate constants in the limit of high pressures was obtained.     

The geometry, vibrational frequencies, thermochemistry, quadrupole moments and electronic structure of C2Na2: Comparison with C2Li2, C2H2, C2F2 and C2Cl2

The electronic structure of Na₂C₂ is studied using ab initio electronic structure methods and is compared to the companion molecule Li₂C₂. Both the linear D_∞h and planar structures are minima on the ground state potential surface with the planar D_2h conformation being the lowest energy form, similar to Li₂C₂. At the CCSD(t) level the planar form is more stable that the linear by 11.2 kcal/mol as compared with 7.34 kcal/mol for Li₂C₂. Both molecules are significantly ionic. The vibrational frequencies, atomization energy at 0 K, D₀, and the standard enthalpy of formation, are calculated and compared to those of Li₂C₂ as well as HCCH, FCCF and ClCCCl. We find D₀ and to be 331.1 and 84.92 kcal/mol for Li₂C₂ and 298.3 and 93.25 kcal/mol for Na₂C₂. We calibrate these by calculating the same quantities for HCCH, FCCF and ClCCCl.     

Preparation of Diamines of Adamantane and Diamantane from the Diazides

A novel synthetic method for preparing diaminodiamondoids from diazidodiamondoids starting from the hydrocarbons is described.     

Singlet-triplet energy separation in divalent seven-membered cyclic conjugated compounds C6H6C, C6H6Si, C6H6Ge, C6H6Sn, and C6H6Pb

The electronic and thermal energy differences, ΔE(t-s); enthalpy differences, ΔH(t-s); and free energy differences between the singlet and triplet states, ΔG(t-s), were calculated for C₆H₆C, C₆H₆Si, C₆H₆Ge, C₆H₆Sn, and C₆H₆Pb at the B3LYP/6-311++G (3df, 2p) level. The singlet-triplet splitting, G _s-t, of C₆H₆C, C₆H₆Si, C₆H₆Ge, C₆H₆Sn, and C₆H₆Pb generally increased from C₆H₆C toward C₆H₆Pb. The most stable tautomers and conformers were suggested for the singlet and triplet states of C₆H₆M (M = C, Si, Ge, Sn and Pb). The geometrical parameters were calculated and discussed. The text was submitted by the authors in English.     

NaBO2-NaCl-Na2CO3, NaBO2- Na2CO3-NaMoO4, NaBO2- Na2CO3-NaWO4, and NaBO2-NaCl-Na2WO4 ternary systems

The phase diagrams of the NaBO₂-NaCl-Na₂CO₃, NaBO₂-Na₂CO₃-Na₂MoO₄, NaBO₂- Na₂CO₃-Na₂WO₄, and NaBO₂-NaCl-Na₂WO₄ ternary systems were studied by a calculation-experimental method and differential thermal analysis. The coordinates of ternary eutectics were determined: E ₁: 612°C, 16 mol % NaBO₂, 42 mol % NaCl, and 42 mol % Na₂CO₃; E ₂: 568°C, 12 mol % NaBO₂, 28 mol % Na₂CO₃, and 60 mol % Na₂MoO₄; E ₃: 575°C, 12 mol % NaBO₂, 32 mol % Na₂CO₃, and 56 mol % Na₂WO₄; E ₄: 628°C, 8 mol % NaBO₂, 20 mol % NaCl, and 72 mol % Na₂WO₄; and E ₅: 655°C, 9 mol % NaBO₂, 53 mol % NaCl, and 38 mol % Na₂WO₄.     

P(VAc-MMA)为基体的聚合物电解质研究

以醋酸乙烯酯(VAc)和甲基丙烯酸甲酯(MMA)为单体, 采用半连续种子乳液聚合法制备了无规共聚物聚(醋酸乙烯酯-甲基丙烯酸甲酯)[P(VAc-MMA)], 并以此聚合物为基体制备了聚合物电解质. 用红外光谱(FTIR)、核磁共振氢谱(¹H NMR)、扫描电镜(SEM)、差热/热重分析(DSC/TG)、X射线衍射(XRD)、机械性能测试和电化学交流阻抗等方法对聚合物和聚合物电解质的性质进行了研究. 测试结果表明: VAc和MMA聚合生成P(VAc-MMA); 聚合物膜含有大量微孔结构, 利于离子传输; 聚合物电解质膜具有优良的热稳定性和机械强度; 25 ℃下, 最高的离子电导率达到了1.27× 10^－3 S•cm^－1; 离子电导率随着温度的升高而迅速增加, 电导率-温度曲线符合Arrhenius方程.     

KCl-KBO2-K2CO3, K2MoO4-KBO2-K2CO3, and K2WO4-KBO2-K2CO3 ternary systems

phase diagrams of KCl-KBO₂-K₂CO₃, K₂MoO₄-KBO₂-K₂CO₃, and K₂WO₄-KBO₂-K₂CO₃ ternary systems were studied by a calculation-experimental method and differential thermal analysis (DTA). The coordinates of ternary eutectics were determined to be E ₁: 622°C, 8.5 mol % KBO₂, 56.5 mol % KCl, and 35 mol % K₂CO₃; E ₂: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂MoO₄; E ₃: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂WO₄. The specific heats of melting of the eutectics were determined.     

Measurement of the radioactivity of 238U, 226Ra, 210Pb, 228Th, 232Th, 228Ra, 137Cs and 40K in tea using gamma-spectrometry

The aim of the present work was to determine the concentration of radionuclides in all kinds of tea available at the local Egyptian market. Radioactivity of the nuclides ²³⁸U, ²²⁶Ra, ²¹⁰Pb, ²²⁸Th, ²³²Th, ²²⁶Ra, ¹³⁷Cs and ⁴⁰K were measured in tea by direct γ-ray spectrometry using HPGe detector and their mean values were 16.0±5.3, 3.1±0.7, 34.3±3.4, 3.4±1.2, 3.0±0.6, 3.1±0.8, 0.9±0.2 and 623±25 Bq·kg⁻¹, respectively.     

Intermolecular forces for D2, N2, O2, F2 and CO2

The intermolecular potentials for D₂, N₂, O₂, F₂ and CO₂ are determined on the basis of the second virial coeffincients, the polarizabilities parallel and perpendicular to the molecular axes, and the electric quadrupole moment. The repulsive parts of the potentials are taken from the corresponding Kihara core-potentials. Effects of the octopolar induction are taken into consideration in a unique way. The potential depends on relative orientations of the two molecules as well as the distance r between the molecular centers. This dependence is shown in graphs. A measure of the anisotropy of the potential depth is 0.72 for CO₂ 0.36 for D₂, and smaller than 0.27 for N₂ O₂ and F₂. The remarkable anisotropy for CO₂ and D₂ is due to strong electrostatic quadrupole interactions.     

Structural chemistry of Sr3Cr2WO9, Ca3Cr2WO9, and Ba3Cr2WO9

We have studied the preparation and crystallographic structure of three perovskite-type compounds: Sr₃Cr₂WO₉, cubic, the lattice parameter of which is a = 7.812Å; Ca₃Cr₂WO₉, tetragonal, the lattice parameters of which are a = 5.408 Å and c = 7.635Å; and Ba₃Cr₂WO₉, hexagonal, the lattice parameters of which are a = 5.691 Å and c = 13.957Å. We have compared these three structures and shown the relationship between the dimensions of the alkaline-earth metal and the existence of the different structures.     

Singlet-triplet energy separations in divalent five-membered cyclic conjugated C5H3X, C4H3SiX, C4H3GeX, C4H3SnX, and C4H3PbX (X = H, F, Cl, and Br)

Singlet-triplet energy gaps in cyclopenta-2,4-dienylidene, as well as its 2- or 3-halogenated derivatives, are compared and contrasted with their sila, germa, stana, and plumba analogues; at HF/6-31G* and B3LYP/ 6-311++G(3df, 2p) levels of theory. Energy gaps (ΔG_t-s), between triplet (t) and singlet (s) states, appear linearly proportional to: (i) the size of the group 14 divalent element (M = C, Si, Ge, Sn and Pb), (ii) the angle ∠C-M-C, and (iii) the ΔG_(LUMO-HOMO) of the singlet state involved. The magnitude of ΔG_t-s, for each 2- and/or 3-substituted species studied, increases with an order of: carbenes < silylenes < germylenes < stanylenes < plumbylenes. This order reverses for the barriers of the ring puckering. The puckering occurs with more ease for every singlet, compared to its corresponding triplet form.Regardless of the group 14 element (M) employed, every 3-halo-substituted species is more stable than the corresponding 2-halo-substituted isomer. For M = Pb, Sn and/or Ge; 3-halo-substituted species have higher ΔG_t-s than their corresponding 2-halo-substituted analogues. For M = Si, similar ΔG_t-s are found for 2- and 3-halogenated isomers. For M = C, 3-halo-substituted species have lower ΔG_t-s than their corresponding 2-halo-substituted analogues.Every cyclic singlet has a larger ∠C-M-C angle, than its corresponding cyclic triplet state, except for 3-halosilacyclopenta-2,4-dienylidenes where triplet has a larger ∠C-M-C angle than its corresponding singlet state.     

Synthesis and crystal chemistry of BaNd2Ti3O10, BaNd2Ti5O14, and Nd4Ti9O24

Two new ternary compounds BaNd₂Ti₃O₁₀ (1:1:3) and BaNd₂Ti₅O₁₄ (1:1:5) have been identified in the BaONd₂O₃TiO₂ system. Single crystals of the compounds were grown and unit cell dimensions and space group symmetry were determined. BaNd₂Ti₃O₁₀ is orthorhombic with a = 3.8655 ± 0.0003, b = 28.156 ± 0.003 and c = 7.6221 ± 0.0007 Å and possible space groups are Cmcm or Cmc2. The compound melts congruently at 1640 ± 20°C. BaNd₂Ti₅O₁₄ is also orthorhombic with a = 22.346 ± 0.002, b = 12.201 ± 0.001 and c = 3.8404 ± 0.0003 Å and possible space groups are Pbam and Pba2. This compound melts congruently at 1540 ± 20°C. Single crystals of the binary compound Nd₄Ti₉O₂₄ were also grown and found to be orthorhombic with a = 35.289 ± 0.003, b = 13.991 ± 0.001, c = 14.479 ± 0.001 Å, space group Fddd.     

Synthesis and crystal structures of Nd6Pt13In22, Sm6Pt12.30In22.70, and Gd6Pt12.48In22.52

The rare earth-platinum-indides Nd₆Pt₁₃In₂₂, Sm₆Pt_12.30In_22.70, and Gd₆Pt_12.48In_22.52 were synthesized from the elements by arc-melting of the components. Single crystals were grown using special annealing sequences. The three indides were investigated by X-ray powder and single crystal diffraction: Tb₆Pt₁₂In₂₃ type, C2/m, Z=2, a=2811.9(6), b=441.60(9), , β=112.10(3)°, wR₂=0.0629, 3645 F² values, 126 variables for Nd₆Pt₁₃In₂₂, a=2821.9(6), b=443.06(9), , β=112.39(3)°, wR₂=0.0543, 3679 F² values, 127 variables for Sm₆Pt_12.30In_22.70, and a=2818.5(6), b=439.90(9), , β=112.29(3)°, wR₂=0.0778, 3938 F² values, 127 variables for Gd₆Pt_12.48In_22.52. Most platinum atoms in these structures have a distorted trigonal prismatic coordination by rare earth metal and indium atoms. Together, the platinum and indium atoms build up a complex three-dimensional [Pt_12+xIn_23−x] polyanionic network in which the rare earth metal atoms fill distorted pentagonal and hexagonal channels. The 2c Wyckoff site in these structures plays a peculiar role. This site is occupied by indium in the prototype Tb₆Pt₁₂In₂₃, while platinum atoms fill the 2c site in Nd₆Pt₁₃In₂₂, leading to a linear Pt₃ chain with Pt-Pt distances of 275 pm. The crystals with samarium and gadolinium as rare earth metal component show mixed Pt/In occupancies.     

Sulfation of CuO,Fe2O3, MnO2, and NiO with (NH4)2SO4

An attempt has been made to calculate the free energy values for possible reactions utilising the available thermodynamic data in order to study the sulfation of CuO, Fe₂O₃, MnO₂ and NiO with (NH₄SO₄, and further trials have been made to determine the exact reaction through differential thermal analysis. There is no real correlation between the theoretical value of ΔH° and that calculated from the DTA peak, which may be due to some uncertainty in the thermodynamic values and the possibility of some side reactions.