Synthesis of Metal‐Free Phthalocyanines in Functionalized Ammonium Ionic Liquids

A convenient, fast, efficient, and ecofriendly synthesis of metal‐free phthalocyanines from various substituted phthalonitriles in different hydroxyalkylammonium ionic liquids in the presence of 1,8‐diazabicyclo‐[5,4,0]‐undec‐7‐ene (DBU) is reported in moderate yields. The effect of concentration of DBU and temperature on the synthesis of phthalocyanine in N‐(2‐hydroxyethyl)‐N,N‐dimethylbutylammonium bromide ionic liquid has been examined, and the ionic liquid has been recovered and reused conveniently.     

Influence of different substitution in pyrazolium ionic liquids on catalytic activity for the fixation of CO2 under solvent- and metal-free conditions

Three pyrazolium ionic liquids, 1,2-diethylpyrazolium bromide (DEPzBr), 1,2-diethyl-3-methylpyrazolium bromide (DEMPzBr), and 1,2-diethyl-3,5-dimethylpyrazolium bromide (DEDMPzBr), are firstly applied as catalysts for coupling reaction of carbon dioxide (CO₂) and propylene oxide (PO) with the propylene carbonate (PC) yields in a range of 82.7%–88.7% under a benign condition, 120?°C, 2.0?MPa initial CO₂ pressure and 4?h with 0.5?mol% catalysts loading. The relationship between structure and catalytic activity of pyrazolium ionic liquids are investigated by two different theoretical models, which indicates that both electrostatic interaction and hydrogen bond promote the ring-opening of PO. Both the theoretical and experimental results present that the catalytic activity decreases in the sequence of DEPzBr?>?DEDMPzBr?>?DEMPzBr. Pyrazolium ionic liquids would be employed as a novel efficient single-component catalyst without solvent and co-catalyst. It is expected that we would open an express pathway to develop new catalysts with the desired properties.     

Tunable synthesis of propylene glycol ether from methanol and propylene oxide under ambient pressure

A series of basic and acidic ionic liquids, 1-butyl-3-methylimidazolium hydroxide (BMIMOH), 1-acetyl-3-methylimidazolium chloride (AcMIMCl) and AcMIMCl-FeCl₃, or analogues of AcMIMCl, namely 1-potassium acetate-3-methylimidazolium chloride (KAcMIMCl), 1-potassium (sodium, ammonium) acetate-3-methylimidazolium hydroxides (KAcMIMOH, NaAcMIMOH and NH₄AcMIMOH), were prepared and used as catalysts for catalytic synthesis of propylene glycol ether via reaction of propylene oxide (PO) with methanol under mild reaction conditions. KAcMIMOH exhibited outstanding catalytic performance with 94.2% of conversion of PO and 99.1% of selectivity to 1-methoxy-2-propanol (MP-2) at 60°C and ambient pressure for 4 h. However, AcMIMCl-FeCl₃ showed a good catalysis performance with high selectivity to 2-methoxy-1-propanol (MP-1). The tunable synthesis of MP-2 or MP-1 catalyzed by basic compound KAcMIMOH or acidic ionic liquid AcMIMCl-FeCl₃ was realized.     

Aza‐Crown Ether Complex Cation Ionic Liquids: Preparation and Applications in Organic Reactions

Aza‐crown ether complex cation ionic liquids (aCECILs) were devised, fabricated, and characterized by using NMR spectroscopy, MS, thermogravimetric differential thermal analysis (TG‐DTA), elemental analysis and physical properties. These new and room‐temperature ILs were utilized as catalysts in various organic reactions, such as the cycloaddition reaction of CO₂ to epoxides, esterification of acetic acid and alcohols, the condensation reaction of aniline and propylene carbonate, and Friedel–Crafts alkylation of indole with aldehydes were investigated carefully. In these reactions, the ionic liquid exhibited cooperative catalytic activity between the anion and cation. In addition, the aza‐[18‐C‐6HK][HSO₄]₂ was the best acidic catalyst in the reactions of esterification and Friedel–Crafts alkylation under mild reaction conditions.     

A Protic Ionic Liquid Catalyzes CO2 Conversion at Atmospheric Pressure and Room Temperature: Synthesis of Quinazoline‐2,4(1H,3H)‐diones

The chemical fixation of CO₂ under mild reaction conditions is of significance from a sustainable chemistry viewpoint. Herein a CO₂‐reactive protic ionic liquid (PIL), [HDBU⁺][TFE^?], was designed by neutralization of the superbase 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) with a weak proton donor trifluoroethanol (TFE). As a bifunctional catalyst for simultaneously activating CO₂ and the substrate, this PIL displayed excellent performance in catalyzing the reactions of CO₂ with 2‐aminobenzonitriles at atmospheric pressure and room temperature, thus producing a series of quinazoline‐2,4(1H,3H)‐diones in excellent yields.     

Transformation of Atmospheric CO2 Catalyzed by Protic Ionic Liquids: Efficient Synthesis of 2‐Oxazolidinones

Protic ionic liquids (PILs), such as 1,8‐diazabicyclo[5.4.0]‐7‐undecenium 2‐methylimidazolide [DBUH][MIm], can catalyze the reaction of atmospheric CO₂ with a broad range of propargylic amines to form the corresponding 2‐oxazolidinones. The products are formed in high yields under mild, metal‐free conditions. The cheaper and greener PILs can be easily recycled and reused at least five times without a decrease in the catalytic activity and selectivity. A reaction mechanism was proposed on the basis of a detailed DFT study which indicates that both the cation and anion of the PIL play key synergistic roles in accelerating the reaction.     

Synthesis of alcohol ester 12 in 1, 8‐diazabicyclo [5.4.0] undec‐7‐ene (DBU)‐based Self‐separation catalytic system

The synthesis of alcohol ester 12 is one of the valuable industrial processes, but it was impeded by poor separating property and recycling ability of the catalytic systems. Herein, four novel DBU‐based basic ionic liquids (DBILs) of [BDBU]IM, [BDBU]OH, [ODBU]IM, [[ODBU]OH were synthesized successfully by introducing the alkyl chains of 1‐bromobutane or 1‐bromooctane to 1,8‐diazabicyclo [5.4.0] undec‐7‐ene (DBU), and then, employing imidazole (IM^?) or hydroxide (OH^?) as counter ions. The above obtained four ionic liquids were applied in the synthesis of alcohol ester 12 in isobutyraldehyde (IBD)/aqueous media for the first time. Interestingly, after reaction, production of alcohol ester 12 can be self‐separated from ionic liquids/water (ILs/W) catalytic system automatically. Furthermore, the self‐separated ILs/W can be recycled and used in next catalytic reaction for at least 5 times without obvious loss of catalytic performance. In this work, the structure, purity, thermal stability and alkalinity of DBILs were characterized systematically. [BDBU]IM shows high alkalinity and thus enhances yield of 66.17%. From thermo gravimetric analyzer (TGA), [BDBU]IM also exhibits excellent thermal stability. So [BDBU]IM was chosen for the further studying. Furthermore, quantum chemistry is applied to calculate the interaction forces and electron energies of reactants by DFT, and the calculation results illustrate the feasibility of synthetic process of DBILs. The self‐separation strategy of DBILS in this work may open up a new avenue for the clean synthesis of other industrial products.     

Is CO2 fixation promoted through the formation of DBU bicarbonate salt?

The bicyclic amidines, 1,8‐diazabicyclo [5.4.0]undec‐7‐ene (DBU) and 1,5‐diazabicyclo[4.3.0] non‐5‐ene (DBN), were used for the chemical fixation of carbon dioxide. The promotion for CO₂ fixation is often reported through the formation of a thermally unstable DBU or DBN bicarbonate salt. To examine the effects of the DBU or DBN bicarbonate salt, reactions of 2‐aminobenzonitrile with the DBU salt or DBN salt in dimethylformamide (DMF) were performed at 20°C for 24 h in argon or carbon dioxide (0.1 MPa). However, in all the cases, 1H‐quinazoline‐2,4‐dione was not obtained completely. In contrast with room temperature reactions, 2‐aminobenzonitriles and DBU bicarbonate salt in DMF reacted for 4 h under high temperature (80°C) and CO₂ atmosphere (0.1 MPa) gave 1H‐quinazoline‐2,4‐diones in good to excellent yields. At high‐temperature conditions, DBU bicarbonate salt is decomposed to DBU and carbon dioxide. Also, the carbonylation of 2‐aminobenzonitrile using DBU and carbon dioxide afforded 1H‐quinazoline‐2,4‐dione in good yields under similar reaction conditions. These results suggest that the combination of DBU or DBN as a strong base and carbon dioxide is much more important than the in situ formation of DBU or DBN bicarbonate salt for the acceleration of CO₂ fixation. © 2012 Wiley Periodicals, Inc. Heteroatom Chem 23:276–280, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21014     

吗啉基功能化酸性离子液体催化苯酚-叔丁醇选择性烷基化反应

研究了吗啉基磺酸功能化离子液体催化苯酚与叔丁醇的烷基化反应.考察不同的功能化离子液体、反应时间、反应温度、苯酚与叔丁醇的摩尔比以及离子液体的用量等反应条件对烷基化反应的影响,并考察了离子液体的循环使用.研究结果表明离子液体用量为20%苯酚时,在最佳优化条件下苯酚的转化率和选择性分别为92.4%和64.1%;离子液体重复使用三次,其催化活性不变.     

An Efficient Catalyst System at Mild Reaction Conditions Containing Rare Earth Metal Complexes

An efficient rare earth metal complex‐catalyzed cycloaddition reaction of CO₂ with propylene oxide using Hdpza (di(2‐pyrazyl)amine) as a N‐donor ligand has been accomplished in good to excellent yields with high selectivity. The effects of different rare earth metal salts, ligands and reaction conditions were examined. Catalytic reaction tests demonstrated that the incorporation of ErCl₃ and Hdpza can significantly enhance the catalytic reactivity of the TBAB (nBu₄NBr, tetra‐n‐butyl ammonium bromide) towards cycloaddition reaction of CO₂ and propylene oxide that produce cyclic carbonates under mild conditions without any co‐solvent.     

Reversible Hydrophobic–Hydrophilic Transition of Ionic Liquids Driven by Carbon Dioxide

Ionic liquids (ILs) with a reversible hydrophobic–hydrophilic transition were developed, and they exhibited unique phase behavior with H₂O: monophase in the presence of CO₂, but biphase upon removal of CO₂ at room temperature and atmospheric pressure. Thus, coupling of reaction, separation, and recovery steps in sustainable chemical processes could be realized by a reversible liquid–liquid phase transition of such IL‐H₂O mixtures. Spectroscopic investigations and DFT calculations showed that the mechanism behind hydrophobic–hydrophilic transition involved reversible reaction of CO₂ with anion of the ILs and formation of hydrophilic ammonium salts. These unique IL‐H₂O systems were successfully utilized for facile one‐step synthesis of Au porous films by bubbling CO₂ under ambient conditions. The Au porous films and the ILs were then separated simultaneously from aqueous solutions by bubbling N₂, and recovered ILs could be directly reused in the next process.     

Imidazolium Ionic Liquids,Imidazolylidene Heterocyclic Carbenes,and Zeolitic Imidazolate Frameworks for CO2 Capture and Photochemical Reduction

Imidazolium ionic liquids (ILs), imidazolylidene N‐heterocyclic carbenes (NHCs), and zeolitic imidazolate frameworks (ZIFs) are imidazolate motifs which have been extensively investigated for CO₂ adsorption and conversion applications. Summarized in this minireview is the recent progress in the capture, activation, and photochemical reduction of CO₂ with these three imidazolate building blocks, from homogeneous molecular entities (ILs and NHCs) to heterogeneous crystalline scaffolds (ZIFs). The developments and existing shortcomings of the imidazolate motifs for their use in CO₂ utilizations is assessed, with more of focus on CO₂ photoredox catalysis. The opportunities and challenges of imidazolate scaffolds for future advancement of CO₂ photochemical conversion for artificial photosynthesis are discussed.     

Brønsted酸性离子液体中的二甘醇脱水环化反应

首次报道了Brønsted酸性离子液体介质中的二甘醇的脱水环化反应,考察了不同的离子液体、离子液体/二甘醇摩尔比、反应温度和时间对反应的影响。结果表明,Brønsted酸性离子液体作为反应介质能够促进脱水环化反应的有效进行,且在离子液体1-(3-磺酸根丙基)-3-甲基咪唑硫酸氢盐([SPmim]HSO4)中,二甘醇的转化率和1,4-二氧六环的选择性更高。采用Hammett指示剂法测定了离子液体的酸度函数H0,其酸性强弱顺序为[SPmim]HSO4 > [Bmim]HSO4 > [Amim]HSO4 > [Hmim]BF4> [Bmim]H2PO4 >[Amim]H2PO4 > [Hmim]Tsa,这与离子液体在脱水环化反应中的催化效果一致。当温度为170 ˚C,离子液体/二甘醇摩尔比为1:1时,二甘醇在[SPmim]HSO4中反应2 h,转化率可达到97.0%,1,4-二氧六环的选择性为89.3%。     

Amino acids/superbases as eco-friendly catalyst system for the synthesis of cyclic carbonates under metal-free and halide-free conditions

An eco-friendly and efficient binary catalyst system of superbases and amino acids was developed for the synthesis of cyclic carbonates from epoxides and CO₂ under metal-free and halide-free conditions. Among the various amino acids and superbases systems tested, the L-histidine/1,8-diazabicyclo[5.4.0]-undec-7-ene (DBU) system achieved the highest conversion of propylene oxide and selectivity of propylene carbonate. The effect of various reaction parameters was evaluated. A possible catalyst mechanism for L-histidine synergized with DBU in the ring opening of epoxide and DBU introduced CO₂ activation. The process herein represents a green, simple, and cost-effective route for the chemical fixation of CO₂ into cyclic carbonates.     

Experimental nibble for computational chemists: On the construction and CO2 capture by different zeolite imidazole ester framework-8 and ionic

The combination of zeolitic imidazolate framework-8 (ZIF-8) and ionic liquids (ILs) to create porous ionic liquids (PILs) is highly significant for efficient carbon dioxide (CO₂) capture and the advancement of carbon capture, utilization, and storage (CCUS) technologies. To further investigate the CO₂ capture characteristics of different PILs, two different-sized ZIF-8 structures and two functionalized ILs were prepared. Additionally, the enhancement factor of the reaction process was calculated using the dual-film theory and mass transfer coefficient. The results demonstrated that the original [PMIm]Cl had low CO₂ absorption capacity at ambient temperature and pressure, whereas the functionalized ILs had a maximum CO₂ capture capacity of approximately .31 mol/mol, with the 20 wt% concentration of tetraethylene pentamine-2-methylimidazole ([TEP][MIm]) exhibiting the highest CO₂ capture capacity of around 1.93 mol/mol. The synthesized PILs demonstrated a maximum CO₂ capture capacity of approximately 2.22 and 2.16 mol/mol at 20 and 10 wt% ionic concentrations, respectively, with a porous ionic liquid addition of 1.0/100 g. The corresponding enhancement factors were 1.53 and 1.59, respectively. These findings have significant implications for CCUS technology.     

Fast catalytic epoxidation with H(2)O(2) and [gamma-SiW(10)O(36)(PhPO)(2)](4-) in ionic liquids under microwave irradiation

Olefin epoxidation by [gamma-SiW10O36(PhPO)2]4- and H2O2 occurs in hydrophobic ionic liquids (ILs), with yields and selectivity up to >99%. The catalytic IL phase is recyclable. Under MW irradiation the reaction occurs with up to 200 turnovers per minute. Simultaneous cooling is instrumental for quantitative H2O2 conversion.     

Acidic functionalized ionic liquids as catalyst for the isomerization of α-pinene to camphene

An acidic functionalized ionic liquids (ILs) [HSO₃-(CH₂)₃-NEt₃]Cl-ZnCl₂ was synthesized and used to catalyze the isomerization of α-pinene in a homogeneous system. The optimum conditions for isomerization were obtained as follows: n(α-pinene):n(ILs) = 9:1, reaction temperature 140 °C, and reaction time 4 h, α-pinene 0.04 mol. Under the optimal conditions, the conversion of α-pinene was 97.6 % and the selectivity for camphene could reach 64.8 %. In addition, the catalyst could be easily separated by centrifugation after the isomerization completely finished. When the ILs were repeatedly used for four times, the conversion of α-pinene and the selectivity for camphene were still excellent, indicating the superb recycle ability of the acidic functionalized ILs catalyst.     

Glaser oxidative coupling in ionic liquids: an improved synthesis of conjugated 1,3-diynes

Terminal alkynes undergo oxidative-coupling smoothly in the presence of the CuCl-TMEDA catalytic system in hydrophobic [bmim]PF₆ ionic liquid under aerobic conditions to produce 1,3-diynes in excellent yields under mild conditions. The substrates, alkynes, show enhanced reactivity and selectivity in ionic liquids (ILs). The recovery of the catalyst is facilitated by the hydrophobic nature of the [bmim]PF₆ ionic liquid.     

Ionic liquids: solvents and sorbents in sample preparation

The applications of ionic liquids (ILs) and IL‐derived sorbents are rapidly expanding. By careful selection of the cation and anion components, the physicochemical properties of ILs can be altered to meet the requirements of specific applications. Reports of IL solvents possessing high selectivity for specific analytes are numerous and continue to motivate the development of new IL‐based sample preparation methods that are faster, more selective, and environmentally benign compared to conventional organic solvents. The advantages of ILs have also been exploited in solid/polymer formats in which ordinarily nonspecific sorbents are functionalized with IL moieties in order to impart selectivity for an analyte or analyte class. Furthermore, new ILs that incorporate a paramagnetic component into the IL structure, known as magnetic ionic liquids (MILs), have emerged as useful solvents for bioanalytical applications. In this rapidly changing field, this Review focuses on the applications of ILs and IL‐based sorbents in sample preparation with a special emphasis on liquid phase extraction techniques using ILs and MILs, IL‐based solid‐phase extraction, ILs in mass spectrometry, and biological applications.     

Basic ionic liquids promoted chemical transformation of CO<Subscript>2</Subscript> to organic carbonates

Ionic liquids (ILs), especially basic ILs with unique physicochemical properties, have wide application in catalysis. Using basic ILs as catalysts for the conversion of cheap, abundant, nontoxic, and renewable CO₂ into value-added organic carbonates is highly significant in view of environmental and economic issues. This review aims at giving a detailed overview on the recent advances on basic ILs promoted chemical transformation of CO₂ to cyclic and linear carbonates. The structures of various basic ILs, as well as the basic ILs promoted reactions for the transformation of CO₂ to organic carbonates are discussed in detail, including the reaction conditions, the yields of target products, the catalytic activities of basic ILs and the reaction mechanism.