Halogen in materials design: Fluoroammonium lead triiodide (FNH3PbI3) perovskite as a newly discovered dynamical bandgap semiconductor in 3D

Methylammonium lead triiodide (CH₃NH₃PbI₃) has been recognized as one of the record‐breaking materials for photovoltaics since it can potentially convert light energy into electricity @ 23%. However, it has been suffering from serious stability and environmental issues for which it is not yet put on market. To this end, experimental and theoretical studies are underway to discover versatile halide‐based perovskite compounds. In this article, we report the polymorphic geometries, stabilities, band structures, density of states spectra, and carrier effective asses of a newly identified perovskite semiconductor called fluoroammonium lead triiodide (FNH₃PbI₃), obtained using compositional engineering combined with periodic density functional theory electronic structure calculations. We show that this compound is stable both in the orthorhombic and pseudocubic phases. We also show that the bandgap for this material oscillates between 1.62 eV (direct) and 1.79 (indirect) for the two polymorphs examined in the pseudocubic phase, with the former and latter values corresponding to the [111] and [110] orientations of the inorganic cation inside the perovskite cage, respectively. Contrariwise, it is direct at Γ‐point for the polymorph examined in the orthorhombic phase. The spin orbit coupling is displayed to have profound effect on the nature and magnitude of the bandgap for this material. This, together with the very small effective masses calculated for the charge carriers comparable with those of CH₃NH₃PbI₃, allows us to propose that FNH₃PbI₃ could be a possible candidate for photovoltaics, as well as for other optoelectronic applications.     

A Lead Iodide Perovskite Based on a Large Organic Cation for Solar Cell Applications

Methylammonium (CH₃NH₃⁺) and formamidinium ((NH₂)₂CH⁺) based lead iodide perovskites are currently the two commonly used organic–inorganic lead iodide perovskites. There are still no alternative organic cations that can produce perovskites with band gaps spanning the visible spectrum (that is, <1.7 eV) for solar cell applications. Now, a new perovskite using large propane‐1,3‐diammonium cation (1,3‐Pr(NH₃)₂²⁺) with a chemical structure of (1,3‐Pr(NH₃)₂)_0.5PbI₃ is demonstrated. X‐ray diffraction (XRD) shows that the new perovskite exhibits a three‐dimensional tetragonal phase. The band gap of the new perovskite is about 1.6 eV, which is desirable for photovoltaic applications. A (1,3‐Pr(NH₃)₂)_0.5PbI₃ perovskite solar cell (PSC) yields a power conversion efficiency (PCE) of 5.1 %. More importantly, this perovskite is composed of a large hydrophobic cation that provides better moisture resistance compared to CH₃NH₃PbI₃ perovskite.     

Methylamine‐Gas‐Induced Defect‐Healing Behavior of CH3NH3PbI3 Thin Films for Perovskite Solar Cells

We report herein the discovery of methylamine (CH₃NH₂) induced defect‐healing (MIDH) of CH₃NH₃PbI₃ perovskite thin films based on their ultrafast (seconds), reversible chemical reaction with CH₃NH₂ gas at room temperature. The key to this healing behavior is the formation and spreading of an intermediate CH₃NH₃PbI₃?xCH₃NH₂ liquid phase during this unusual perovskite–gas interaction. We demonstrate the versatility and scalability of the MIDH process, and show dramatic enhancement in the performance of perovskite solar cells (PSCs) with MIDH. This study represents a new direction in the formation of defect‐free films of hybrid perovskites.     

Correlation between Interfacial Structures and Device Performance: The Double-Edged Sword Effect of Lead Iodide in Perovskite Solar Cells

The interfacial electronic structure of perovskite layers and transport layers is critical for the performance and stability of perovskite solar cells (PSCs). The device performance of PSCs can generally be improved by adding a slight excess of lead iodide (PbI₂) to the precursor solution. However, its underlying working mechanism is controversial. Here, we performed a comprehensive study of the electronic structures at the interface between CH₃NH₃PbI₃ and C₆₀ with and without the modification of PbI₂ using in situ photoemission spectroscopy measurements. The correlation between the interfacial structures and the device performance was explored based on performance and stability tests. We found that there is an interfacial dipole reversal, and the downward band bending is larger at the CH₃NH₃PbI₃/C₆₀ interface with the modification of PbI₂ as compared to that without PbI₂. Therefore, PSCs with PbI₂ modification exhibit faster charge carrier transport and slower carrier recombination. Nevertheless, the modification of PbI₂ undermines the device stability due to aggravated iodide migration. Our findings provide a fundamental understanding of the CH₃NH₃PbI₃/C₆₀ interfacial structure from the perspective of the atomic layer and insight into the double-edged sword effect of PbI₂ as an additive.     

Stable and Low‐Cost Mesoscopic CH3NH3PbI2Br Perovskite Solar Cells by using a Thin Poly(3‐hexylthiophene) Layer as a Hole Transporter

Mesoscopic perovskite solar cells using stable CH₃NH₃PbI₂Br as a light absorber and low‐cost poly(3‐hexylthiophene) (P3HT) as hole‐transporting layer were fabricated, and a power conversion efficiency of 6.64 % was achieved. The partial substitution of iodine with bromine in the perovskite led to remarkably prolonged charge carrier lifetime. Meanwhile, the replacement of conventional thick spiro‐MeOTAD layer with a thin P3HT layer has significantly reduced the fabrication cost. The solar cells retained their photovoltaic performance well when they were exposed to air without any encapsulation, presenting a favorable stability. The combination of CH₃NH₃PbI₂Br and P3HT may render a practical and cost‐effective solid‐state photovoltaic system. The superior stability of CH₃NH₃PbI₂Br is also promising for other photoconversion applications.     

Theoretical Treatment of CH3NH3PbI3 Perovskite Solar Cells

Hybrid halide perovskite solar cells (PSCs) giving over 22 % power conversion efficiencies (PCEs) have attracted considerable attention. Although perovskite plays a significant role in the operation of PSCs, the fundamental theories associated with perovskites have not been resolved in spite of the increase in research. In this Minireview, we assess the current understanding, based on the first‐principles calculations, of structural and electronic properties, defects, ionic diffusion, and shift current for CH₃NH₃PbI₃ perovskite, and the effect of ionic transport on the hysteresis of current–voltage curves in PSCs. The shift current connected to the possible presence of ferroelectricity is also discussed. The current state‐of‐the‐art and some open questions regarding PSCs are also highlighted, and the benefits, challenges, and potentials of perovskite for use in PSCs are stressed.     

Ultrafast Photogenerated Hole Extraction/Transport Behavior in a CH3NH3PbI3/Carbon Nanocomposite and Its Application in a Metal‐Electrode‐Free Solar Cell

Aligned and flexible electrospun carbon nanomaterials are used to synthesize carbon/perovskite nanocomposites. The free‐electron diffusion length in the CH₃NH₃PbI₃ phase of the CH₃NH₃PbI₃/carbon nanocomposite is almost twice that of bare CH₃NH₃PbI₃, and nearly 95 % of the photogenerated free holes can be injected from the CH₃NH₃PbI₃ phase into the carbon nanomaterial. The exciton binding energy of the composite is estimated to be 23 meV by utilizing temperature‐dependent optical absorption spectroscopy. The calculated free carriers increase with increasing total photoexcitation density, and this broadens the potential of this material for a broad range of optoelectronics applications. A metal‐electrode‐free perovskite solar cell (power conversion efficiency: 13.0 %) is fabricated with this perovskite/carbon composite, which shows great potential for the fabrication of efficient, large‐scale, low‐cost, and metal‐electrode‐free perovskite solar cells.     

Inkjet Printing and Instant Chemical Transformation of a CH3NH3PbI3/Nanocarbon Electrode and Interface for Planar Perovskite Solar Cells

A planar perovskite solar cell that incorporates a nanocarbon hole‐extraction layer is demonstrated for the first time by an inkjet printing technique with a precisely controlled pattern and interface. By designing the carbon plus CH₃NH₃I ink to transform PbI₂ in situ to CH₃NH₃PbI₃, an interpenetrating seamless interface between the CH₃NH₃PbI₃ active layer and the carbon hole‐extraction electrode was instantly constructed, with a markedly reduced charge recombination compared to that with the carbon ink alone. As a result, a considerably higher power conversion efficiency up to 11.60 % was delivered by the corresponding solar cell. This method provides a major step towards the fabrication of low‐cost, large‐scale, metal‐electrode‐free but still highly efficient perovskite solar cells.     

Inorganic Pb‐Free Perovskite Light Absorbers for Efficient Perovskite Solar Cells with Enhanced Performance

Recently, enormous efforts have been made to develop the efficient, lead (Pb) free and stable perovskite solar cells (PSCs). In this regards, various strategies were applied and the optoelectronic properties of various Pb free perovskites such as (CH₃NH₃)₃Sb₂I₉, (CH₃NH₃)₃Bi₂I₉, Cs₃Sb₂I₉, Cs₃Bi₂I₉, CH₃NH₃SnI₃ and CH₃NH₃GeI₃ etc have been investigated. However, the photovoltaic performance of the developed PSCs was still low and presence of organic moieties in common hole‐transport materials (HTMs) shows poor stability against moisture and heat. Herein, we have investigated the optoelectronic properties of all inorganic Pb free perovskites (Cs₃Sb₂I₉=1 and Cs₃Bi₂I₉=2) and employed novel strategies (dissolution‐recrystallization) to prepare the efficient Pb free PSCs. The band gaps of the 1 and 2 were found to be 2.2 eV and 2.0 eV, respectively. The developed PSCs with 1 and 2 exhibited the power conversion efficiency of 0.68% and 1.087%, respectively.     

Anti-Solvent-Free Preparation for Efficient and Photostable Pure-Iodide Wide-Bandgap Perovskite Solar Cells

The perovskite/silicon tandem solar cell (TSC) has attracted tremendous attention due to its potential to breakthrough the theoretical efficiency set for single-junction solar cells. However, the perovskite solar cell (PSC) designed as its top component cell suffers from severe photo-induced halide segregation owing to its mixed-halide strategy for achieving desirable wide-bandgap (1.68 eV). Developing pure-iodide wide-bandgap perovskites is a promising route to fabricate photostable perovskite/silicon TSCs. Here, we report efficient and photostable pure-iodide wide-bandgap PSCs made from an anti-solvent-free (ASF) technique. The ASF process is achieved by mixing two precursor solutions, both of which are capable of depositing corresponding perovskite films without involving anti-solvent. The mixed solution finally forms Cs_0.3DMA_0.2MA_0.5PbI₃ perovskite film with a bandgap of 1.68 eV. Furthermore, methylammonium chloride additive is applied to enhance the crystallinity and reduce the trap density of perovskite films. As a result, the pure-iodide wide-bandgap PSC delivers efficiency as high as 21.30 % with excellent photostability, the highest for this type of solar cells. The ASF method significantly improves the device reproducibility as compared with devices made from other anti-solvent methods. Our findings provide a novel recipe to prepare efficient and photostable wide-bandgap PSCs.     

First-Principles Study of Aziridinium Lead Iodide Perovskite for Photovoltaics

The long-term stability remains one of the main challenges for the commercialization of the rapidly developing hybrid organic-inorganic perovskite solar cells. Herein, we investigate the electronic and optical properties of the recently reported hybrid halide perovskite (CH₂)₂NH₂PbI₃ (AZPbI₃), which exhibits a much better stability than the popular halide perovskites CH₃NH₃PbI₃ and HC(NH₂)₂PbI₃, by using density functional theory (DFT). We find that AZPbI₃ possesses a band gap of 1.31 eV, ideal for single-junction solar cells, and its optical absorption is comparable with those of the popular CH₃NH₃PbI₃ and HC(NH₂)₂PbI₃ materials in the whole visible-light region. In addition, the conductivity of AZPbI₃ can be tuned from efficient p-type to n-type, depending on the growth conditions. Besides, the charge-carrier mobilities and lifetimes are unlikely hampered by deep transition energy levels, which have higher formation energies in AZPbI₃ according to our calculations. Overall, we suggest that the perovskite AZPbI₃ is an excellent candidate as a stable high-performance photovoltaic absorber material.     

Mixed‐Halide CH3NH3PbI3−xXx (X=Cl,Br, I) Perovskites: Vapor‐Assisted Solution Deposition and Application as Solar Cell Absorbers

There have been recent reports on the formation of single‐halide perovskites, CH₃NH₃PbX₃ (X=Cl, Br, I), by means of vapor‐assisted solution processing. Herein, the successful formation of mixed‐halide perovskites (CH₃NH₃PbI_3?xX_x) by means of a vapor‐assisted solution method at ambient atmosphere is reported. The perovskite films are synthesized by exposing PbI₂ film to CH₃NH₃X (X=I, Br, or Cl) vapor. The prepared perovskite films have uniform surfaces with good coverage, as confirmed by SEM images. The inclusion of chlorine and bromine into the structure leads to a lower temperature and shorter reaction time for optimum perovskite film formation. In the case of CH₃NH₃PbI_3?xCl_x, the optimum reaction temperature is reduced to 100 °C, and the resulting phases are CH₃NH₃PbI₃ (with trace Cl) and CH₃NH₃PbCl₃ with a ratio of about 2:1. In the case of CH₃NH₃PbI_3?xBr_x, single‐phase CH₃NH₃PbI₂Br is formed in a considerably shorter reaction time than that of CH₃NH₃PbI₃. The mesostructured perovskite solar cells based on CH₃NH₃PbI₃ films show the best optimal power conversion efficiency of 13.5 %, whereas for CH₃NH₃PbI_3?xCl_x and CH₃NH₃PbI_3?xBr_x the best recorded efficiencies are 11.6 and 10.5 %, respectively.     

A Three‐Step Method for the Deposition of Large Cuboids of Organic–Inorganic Perovskite and Application in Solar Cells

A three‐step method for the deposition of CH₃NH₃PbI₃ perovskite films with a high crystalline structure and large cuboid overlayer morphology is reported. The method includes PbI₂ deposition, which is followed by dipping into a solution of C₄H₉NH₃I (BAI) and (BA)₂PbI₄ perovskite formation. In the final step, the poorly thermodynamically stable (BA)₂PbI₄ phase converts into the more stable CH₃NH₃PbI₃ perovskite by dipping into a solution of CH₃NH₃I. The final product is characterized by XRD, SEM, UV/Vis, and photoluminescence analysis methods. The experimental results indicate that the prepared perovskite has cuboids with high crystallinity and large sizes (up to 1 μm), as confirmed by XRD and SEM data. Photovoltaic investigations show that the three‐step method results in higher solar cell efficiency (15 % enhancement in efficiency) with a better reproducibility than the conventional two‐step deposition method.     

Role of the Iodide–Methylammonium Interaction in the Ferroelectricity of CH3NH3PbI3

Excellent conversion efficiencies of over 20 % and facile cell production have placed hybrid perovskites at the forefront of novel solar cell materials, with CH₃NH₃PbI₃ being an archetypal compound. The question why CH₃NH₃PbI₃ has such extraordinary characteristics, particularly a very efficient power conversion from absorbed light to electrical power, is hotly debated, with ferroelectricity being a promising candidate. This does, however, require the crystal structure to be non‐centrosymmetric and we herein present crystallographic evidence as to how the symmetry breaking occurs on a crystallographic and, therefore, long‐range level. Although the molecular cation CH₃NH₃⁺ is intrinsically polar, it is heavily disordered and this cannot be the sole reason for the ferroelectricity. We show that it, nonetheless, plays an important role, as it distorts the neighboring iodide positions from their centrosymmetric positions.     

Hybrid organic–inorganic CH3NH3PbI3 perovskite building blocks: Revealing ultra‐strong hydrogen bonding and mulliken inner complexes and their implications in materials design

Methylammonium lead iodide (CH₃NH₃PbI₃) perovskite compound has produced a remarkable breakthrough in the photovoltaic history of solar cell technology because of its outstanding device‐based performance as a light‐harvesting semiconductor. Whereas the experimental and theoretical studies of this system in the solid state have been numerously reported in the last 4 years, its fundamental cluster physics is yet to be exploited. To this end, this study has performed theoretical investigations using DFT‐M06‐2X/ADZP to examine the principal geometrical, electronic, topological, and orbital properties of the CH₃NH₃PbI₃ molecular building block. The intermolecular hydrogen bonded interactions examined for the most important conformers of the system are found to be unusually strong, with binding energies lying between −93.53 and −125.11 kcal mol⁻¹ (beyond the covalent limit, −40 kcal mol⁻¹), enabling us to classify the underlying interactions as ultra‐strong type since their characteristic properties are unidentical with those have already been proposed as very strong, strong, moderate, weak, and van der Waals. Based on this, together with the unusually high charge transfers, strong hyperconjugative interactions, sophisticated topologies of the charge density, and short intermolecular distances of separation, we have characterized the conformers of CH₃NH₃PbI₃ as Mulliken inner complexes. The consequences of these, as well as of the ultra‐strong interactions, in designing novel functional nanomaterials are outlined. © 2017 Wiley Periodicals, Inc.     

The domination of ionic conductivity in tetragonal phase of the organometal halide perovskite CH3NH3PbI3-xClx

Organometal trihalide perovskites have recently gained extreme attention due to their high solar energy conversion in photovoltaic cells. Here, we investigate the contribution of iodide ions to a total conductivity of the mixed lead halide perovskite CH₃NH₃PbI_3−xCl_x with a use of the modified DC Hebb–Wagner polarization method. It has been identified that an ionic conductivity dominates in tetragonal phase which is associated with room temperature. The obtained activation energy for this type of hopping mechanism is equal to (0.87 ± 0.02) eV, which is in a good agreement with previous literature reports. The high contribution of ionic conductivity at room temperature might be a reason of the observed hysteresis in halide perovskite solar cells.     

In situ Investigations of Interfacial Degradation and Ion Migration at CH3NH3PbI3 Perovskite/Ag Interfaces

Interfacial properties between perovskite layers and metal electrodes play a crucial role in the device performance and the long-term stability of perovskite solar cells. Here, we report a comprehensive study of the interfacial degradation and ion migration at the interface between CH₃NH₃PbI₃ perovskite layer and Ag electrode. Using in situ photoemission spectroscopy measurements, we found that the Ag electrode could induce the degradation of perovskite layers, leading to the formation of PbI₂ and AgI species and the reduction of Pb²⁺ ions to metallic Pb species at the interface. The unconventional enhancement of the intensities of I 3d spectra provides direct experimental evidences for the migration of iodide ions from CH₃NH₃PbI₃ subsurface to Ag electrode. Moreover, the contact of Ag electrode and perovskite layers induces an interfacial dipole of 0.3 eV at CH₃NH₃PbI₃/Ag interfaces, which may further facilitate iodide ion di usion, resulting in the decomposition of perovskite layers and the corrosion of Ag electrode.     

Thin‐Film Transformation of NH4PbI3 to CH3NH3PbI3 Perovskite: A Methylamine‐Induced Conversion–Healing Process

Methylamine‐induced thin‐film transformation at room‐temperature is discovered, where a porous, rough, polycrystalline NH₄PbI₃ non‐perovskite thin film converts stepwise into a dense, ultrasmooth, textured CH₃NH₃PbI₃ perovskite thin film. Owing to the beneficial phase/structural development of the thin film, its photovoltaic properties undergo dramatic enhancement during this NH₄PbI₃‐to‐CH₃NH₃PbI₃ transformation process. The chemical origins of this transformation are studied at various length scales.     

Pseudohalide‐Induced Moisture Tolerance in Perovskite CH3NH3Pb(SCN)2I Thin Films

Two pseudohalide thiocyanate ions (SCN^?) have been used to replace two iodides in CH₃NH₃PbI₃, and the resulting perovskite material was used as the active material in solar cells. In accelerated stability tests, the CH₃NH₃Pb(SCN)₂I perovskite films were shown to be superior to the conventional CH₃NH₃PbI₃ films as no significant degradation was observed after the film had been exposed to air with a relative humidity of 95 % for over four hours, whereas CH₃NH₃PbI₃ films degraded in less than 1.5 hours. Solar cells based on CH₃NH₃Pb(SCN)₂I thin films exhibited an efficiency of 8.3 %, which is comparable to that of CH₃NH₃PbI₃ based cells fabricated in the same way.     

Control of Charge Transport in the Perovskite CH3NH3PbI3 Thin Film

Carrier density and transport properties in the CH₃NH₃PbI₃ thin film have been investigated. It is found that the carrier density, the depletion field, and the charge collection and transport properties in the CH₃NH₃PbI₃ absorber film can be controlled effectively by different concentrations of reactants. That is, the carrier properties and the self‐doping characteristics in CH₃NH₃PbI₃ films are strongly influenced by the reaction thermodynamic and kinetic processes. Furthermore, by employing mixed solvents with ethanol and isopropanol to deposit the CH₃NH₃PbI₃ film, the charge collection and transport efficiencies are improved significantly, thereby yielding an overall enhanced cell performance.