Fluorine‐Free Synthesis of High‐Purity Ti3C2Tx (T=OH,O) via Alkali Treatment

MXenes, 2D compounds generated from layered bulk materials, have attracted significant attention in energy‐related fields. However, most syntheses involve HF, which is highly corrosive and harmful to lithium‐ion battery and supercapacitor performance. Here an alkali‐assisted hydrothermal method is used to prepare a MXene Ti₃C₂T_x (T=OH, O). This route is inspired from a Bayer process used in bauxite refining. The process is free of fluorine and yields multilayer Ti₃C₂T_x with ca. 92 wt % in purity (using 27.5 m NaOH, 270 °C). Without the F terminations, the resulting Ti₃C₂T_x film electrode (ca. 52 μm in thickness, ca. 1.63 g cm^?3 in density) is 314 F g^?1 via gravimetric capacitance at 2 mV s^?1 in 1 m H₂SO₄. This surpasses (by ca. 214 %) that of the multilayer Ti₃C₂T_x prepared via HF treatments. This fluorine‐free method also provides an alkali‐etching strategy for exploring new MXenes for which the interlayer amphoteric/acidic atoms from the pristine MAX phase must be removed.     

Regulating Fast Anionic Redox for High‐Voltage Aqueous Hydrogen‐Ion‐based Energy Storage

The ionic conductivity and small size of the hydrogen ion make it an ideal charge carrier for hydrogen‐ion energy storage (HES); however, high‐voltage two‐electrode configurations are difficult to construct as the result of the lack of efficient cathodic energy storage. Herein, the high potential fast anionic redox at the cathode of reduced graphene oxide (rGO) was applied by introducing redox additive electrolytes. By coupling the storing hydrogen ion in the Ti₃C₂T_x at the anode, a HES with a voltage of 1.8 V and a plateau voltage at 1.2 V was constructed. Compared with 2.2 Wh kg^?1 for the low‐voltage Ti₃C₂T_x//Ti₃C₂T_x, the specific energy of asymmetric rGO//Ti₃C₂T_x reaches 34.4 Wh kg^?1. Furthermore, it possesses an energy density of 23.7 Wh kg^?1 at high power density of 22.5 kW kg^?1. Thus, this study provides a novel guideline for constructing high‐voltage fast HES full cells.     

Tuning the Electrochemical Performance of Titanium Carbide MXene by Controllable In Situ Anodic Oxidation

MXenes are a class of two‐dimensional (2D) transition metal carbides, nitrides and carbonitrides that have shown promise for high‐rate pseudocapacitive energy storage. However, the effects that irreversible oxidation have on the surface chemistry and electrochemical properties of MXenes are still not understood. Here we report on a controlled anodic oxidation method which improves the rate performance of titanium carbide MXene (Ti₃C₂T_x, T_x refers to ‐F, =O, ‐Cl and ‐OH) electrodes in acidic electrolytes. The capacitance retention at 2000 mV s^?1 (with respect to the lowest scan rate of 5 mV s^?1) increases gradually from 38 % to 66 % by tuning the degree of anodic oxidation. At the same time, a loss in the redox behavior of Ti₃C₂T_x is evident at high anodic potentials after oxidation. Several analysis methods are employed to reveal changes in the structure and surface chemistry while simultaneously introducing defects, without compromising electrochemically active sites, are key factors for improving the rate performance of Ti₃C₂T_x. This study demonstrates improvement of the electrochemical performance of MXene electrodes by performing a controlled anodic oxidation.     

Toward Understanding the Enhanced Pseudocapacitive Storage in 3D SnS/MXene Architectures Enabled by Engineered Surface Reactions

The optimization of three-dimensional (3D) MXene-based electrodes with desired electrochemical performances is highly demanded. Here, a precursor-guided strategy is reported for fabricating the 3D SnS/MXene architecture with tiny SnS nanocrystals (≈5 nm in size) covalently decorated on the wrinkled Ti₃C₂T_x nanosheets through Ti−S bonds (denoted as SnS/Ti₃C₂T_x-O). The formation of Ti−S bonds between SnS and Ti₃C₂T_x was confirmed by extended X-ray absorption fine structure (EXAFS). Rather than bulky SnS plates decorated on Ti₃C₂T_x (SnS/Ti₃C₂T_x-H) by one-step hydrothermal sulfidation followed by post annealing, this SnS/Ti₃C₂T_x-O presents size-dependent structural and dynamic properties. The as-formed 3D hierarchical structure can provide short ion-diffusion pathways and electron transport distances because of the more accessible surface sites. In addition, benefiting from the tiny SnS nanocrystals that can effectively improve Na⁺ diffusion and suppress structural variation upon charge/discharge processes, the as-obtained SnS/Ti₃C₂T_x-O can generate pseudocapacitance-dominated storage behavior enabled by engineered surface reactions. As predicted, this electrode exhibits an enhanced Na storage capacity of 565 mAh g⁻¹ at 0.1 A g⁻¹ after 75 cycles, outperforming SnS/Ti₃C₂T_x-H (336 mAh g⁻¹), SnS (212 mAh g⁻¹), and Ti₃C₂T_x (104 mAh g⁻¹) electrodes.     

A Hybrid Assembly of MXene with NH2−Si Nanoparticles Boosting Lithium Storage Performance

A facile hybrid assembly between Ti₃C₂T_x MXene nanosheets and (3‐aminopropyl) triethoxylsilane‐modified Si nanoparticles (NH₂?Si NPs) was developed to construct multilayer stacking of Ti₃C₂T_x nanosheets with NH₂?Si NPs assembling together (NH₂?Si/Ti₃C₂T_x). NH₂?Si/Ti₃C₂T_x exhibits a significantly enhanced lithium storage performance compared to pristine Si, which is attributed to the robust crosslinking architecture and considerably improved electrical conductivity as well as shorter Li⁺ diffusion pathways. The optimized NH₂?Si/Ti₃C₂T_x anode with Ti₃C₂T_x: NH₂?Si mass ratio of 4 : 1 displays an enhanced capacity (864 mAh g^?1 at 0.1 C) with robust capacity retention, which is significantly higher than those of NH₂?Si NPs and Ti₃C₂T_x anodes. Furthermore, this work demonstrates the important effect of the MXene‐based electrode architecture on the electrochemical performance and can guide future work on designing high‐performance Si/MXene hybrids for energy storage applications.     

Dye adsorbed few-layer thick Ti3C2Tx-MXenes for direct electrochemical detection of CD44 proteins

The direct electrochemical detection of cancer biomarkers using single single-component platforms is challenging. Herein, we propose constructing an efficient screen-printed electrode (SPE) based platform for selective detection of CD44 proteins, a non-kinase transmembrane glycoprotein. A sensing platform, MB-MX/HA/SPE, was developed by incorporating few-layered Ti₃C₂T_x nanosheets pre-loaded with methylene blue (MB) dye. The nanosheets were subsequently immobilized with hyaluronic acid (HA), which served as a ligand for the specific recognition of CD44. The simple electrode configuration and the highly conductive Ti₃C₂T_x facilitated the electrochemical oxidation of MB, generating a reference SWV signal that declined proportionally with the increasing concentration of CD44 owing to ligand (HA)-protein interaction. The sensor could register a sensitive inhibition response in the concentration range of 0.1 to 7.25 ng.mL⁻¹ with a detection limit of 1.2×10⁻² ng.mL⁻¹ for CD44 proteins. Moreover, the synergistic combination of the highly conductive/adsorptive Ti₃C₂T_x nanosheets and hyaluronic acid (HA) led to strong antifouling characteristics even in the presence of other common proteins, such as bovine serum albumin (BSA), haemoglobin (Ig), immunoglobulin G (IgG), prostate-specific antigen (PSA), and neuron-specific enolase (NSE). The proposed strategy eliminates the need for additional components in the electrode modification procedure. In addition, incorporating MXenes as electrode material paves the way for developing sensitive biosensors with prospective applications in cancer diagnosis.     

Simultaneous Delamination and Rutile Formation on the Surface of Ti3C2Tx MXene for Copper Adsorption

In this work, we studied the formation of the rutile phase of titanium dioxide (TiO₂) on delaminated MXene (d‐Ti₃C₂T_x) flakes by the reaction of Ti₃C₂T_x with amino acids in water. Three types of amino acids with varied side‐chain polarity were used to delaminate Ti₃C₂T_x. d‐Ti₃C₂T_x flakes formed stable colloidal solutions due to the negative surface charges of chemisorbed amino acids on the d‐Ti₃C₂T_x. Rutile formed on d‐Ti₃C₂T_x at room temperature upon the intercalation of aromatic amino acids and subsequent sonication of the solution, while flakes intercalated with aliphatic amino acids did not oxidize. X‐Ray diffraction (XRD), transmission electron microscopy (TEM) and Raman spectroscopy revealed the nanosize rutile formation on the surface of Ti₃C₂T_x flakes. The XPS results indicated the surface functionalization of histidine on d‐Ti₃C₂T_x flakes. As‐synthesized histidine functionalized rutile TiO₂@d‐Ti₃C₂T_x hybrid was used for adsorption of Cu²⁺ ions from aqueous solution with a maximum uptake of 95 mg g^?1.     

Achieving high-rate capacitance of multi-layer titanium carbide (MXene) by liquid-phase exfoliation through Li-intercalation

The stacks of multi-layer Ti₃C₂T_x and other types of MXene materials limit their electrochemical performance. Herein, we report a facile exfoliation technique to improve the exfoliation efficiency through Li-intercalation into Ti₃C₂T_x interlayers in isopropyl alcohol (IPA) with LiOH as intercalant. This de-intercalation method presented here not only effectively delaminates the stacked Ti₃C₂T_x multi-layers into separate few-layer MXene sheets, but also achieves high-rate supercapacitive performance of Ti₃C₂T_x electrode. The as-produced delaminated Ti₃C₂T_x shows highly improved electrochemical capacitive properties from 47 to 115 F g^− 1 at 200 mV s^− 1. Even at extremely high scan rate of 1000 mV s^− 1, a specific capacitance of 82 F g^− 1 is still obtained. The high-rate capability can be attributed to improved ions accessibility into the few-layer structures. This study offers a new and simple exfoliation pathway for MXenes materials to exploit their full potential in energy storage applications.     

Functional MXene Materials: Progress of Their Applications

Nowadays, two‐dimensional materials have many applications in materials science. As a novel two‐dimensional layered material, MXene possesses distinct structural, electronic, and chemical properties; thus, it has potential applications in many fields, including battery electrodes, energy storage materials, sensors, and catalysts. Up to now, more than 70 MAX phases have been reported. However, in contrast to the variety of MAX phases, the existing MXene family merely includes Ti₂C, Ti₃C₂, (Ti_1/2, Nb_1/2)₂C, (V_1/2, Cr_1/2)₃C₂, Nb₂C, Ti₃CN, Ta₄C₃, V₂C, and Nb₄C₃. Among these materials, the Ti₃C₂T_x MXene exhibits prominently high volumetric capacitance, and the rate at which it transports electron is suitable for electrode materials in batteries and supercapacitors. Hence, Ti₃C₂T_x is commonly utilized as an electrode material in ion batteries such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, and Al³⁺ batteries. What is more, Ti₂C has the biggest specific surface area among all of these potential MXene phases, and therefore, Ti₂C has remarkably high gravimetric hydrogen storage capacities. In addition, Ti₂CO₂ materials display extremely high activity for CO oxidation, which makes it possible to design catalysts for CO oxidation at low temperatures. Furthermore, Ti₃C₂T_x with O, OH, and/or F terminations can be used for water purification owing to excellent water permeance, favorable filtration ability, and long‐time operation ability. This review supplies a relatively comprehensive summary of various applications of MXenes over the past few years.     

Chlorophyll-Based Organic Heterojunction on Ti3C2Tx MXene Nanosheets for Efficient Hydrogen Production

The Z-scheme process is a photoinduced electron-transfer pathway in natural oxygenic photosynthesis involving electron transport from photosystem II (PSII) to photosystem I (PSI). Inspired by the interesting Z-scheme process, herein a photocatalytic hydrogen evolution reaction (HER) employing chlorophyll (Chl) derivatives, Chl-1 and Chl-2, on the surface of Ti₃C₂T_x MXene with two-dimensional accordion-like morphology, forming Chl-1@Chl-2@Ti₃C₂T_x composite, is demonstrated. Due to the frontier molecular orbital energy alignments of Chl-1 and Chl-2, sublayer Chl-1 is a simulation of PSI, whereas upper layer Chl-2 is equivalent to PSII, and the resultant electron transport can take place from Chl-2 to Chl-1. Under the illumination of visible light (>420 nm), the HER performance of Chl-1@Chl-2@Ti₃C₂T_x photocatalyst was found to be as high as 143 μmol h⁻¹ g_cat⁻¹, which was substantially higher than that of photocatalysts of either Chl-1@Ti₃C₂T_x (20 μmol h⁻¹ g⁻¹) or Chl-2@Ti₃C₂T_x (15 μmol h⁻¹ g⁻¹).     

A Two‐Dimensional Lamellar Membrane: MXene Nanosheet Stacks

Two‐dimensional (2D) materials are promising candidates for advanced water purification membranes. A new kind of lamellar membrane is based on a stack of 2D MXene nanosheets. Starting from compact Ti₃AlC₂, delaminated nanosheets of the composition Ti₃C₂T_x with the functional groups T (O, OH, and/or F) can be produced by etching and ultrasonication and stapled on a porous support by vacuum filtration. The MXene membrane supported on anodic aluminum oxide (AAO) substrate shows excellent water permeance (more than 1000 L m⁻² h⁻¹ bar⁻¹) and favorable rejection rate (over 90 %) for molecules with sizes larger than 2.5 nm. The water permeance through the MXene membrane is much higher than that of the most membranes with similar rejections. Long‐time operation also reveals the outstanding stability of the MXene membrane for water purification.     

Electrochemical and in-situ X-ray diffraction studies of Ti3C2Tx MXene in ionic liquid electrolyte

2D titanium carbide (Ti₃C₂T_x MXene) showed good capacitance in both organic and neat ionic liquid electrolytes, but its charge storage mechanism is still not fully understood. Here, electrochemical characteristics of Ti₃C₂T_x electrode were studied in neat EMI-TFSI electrolyte. A capacitive behavior was observed within a large electrochemical potential range (from − 1.5 to 1.5 V vs. Ag). Intercalation and de-intercalation of EMI⁺ cations and/or TFSI⁻ anions were investigated by in-situ X-ray diffraction. Interlayer spacing of Ti₃C₂T_x flakes decreases during positive polarization, which can be ascribed to either electrostatic attraction effect between intercalated TFSI⁻ anions and positively charged Ti₃C₂T_x nanosheets or steric effect caused by de-intercalation of EMI⁺ cations. The expansion of interlayer spacing when polarized to negative potentials is explained by steric effect of cation intercalation.     

Pt immobilized spontaneously on porous MXene/MAX hybrid monolith for hydrogen evolution reaction

Designing efficient electrocatalysts with low Pt loadings for hydrogen evolution reaction(HER) is urgently required for renewable and sustainable energy conversion.Here,we report a strategy that Pt nanoparticulates are spontaneously immobilized on porous MXene/MAX monolith as HER catalysts by utilizing the redox reaction between Ti_3C_2T_x MXene and [PtCl_4]~2 in H_2 PtCl_6 aqueous solution.By taking advantage of homogeneously distributed Pt nanoparticulates on highly electrically conductive porous Ti_3C_2T_x/Ti_3AlC_2 monolith,the as-prepared electrocatalysts show high catalytic performance for hydrogen evolution.Specifically,the binder-free electrocatalysts have Pt loadings as low as 8.9 μg/cm~2,with low overpotential of 43 mV at a curre nt density of 10 mA/cm~2 and low Tafel slope that three times lower than porous Ti_3C_2T_x/Ti_3AlC_2 without Pt loading.This strategy offers a new approach to constructing ultra-low Pt-loading HER catalysts on the basis of in situ redox reaction between noble metal ions and MXenes.     

Luminescence properties of three structures built from 3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olate and alkaline metals (Na,K and Rb)

The structures of three salts of 3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olate with alkali metals (Na, K and Rb) are related to their luminescence properties. The Rb salt, rubidium(I) 3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olate, Rb⁺·C₈HN₄O₂⁻, is isomorphous with the previously reported potassium salt. For the Na compound, sodium(I) 3‐cyano‐4‐dicyanomethylene‐5‐oxo‐4,5‐dihydro‐1H‐pyrrol‐2‐olate dihydrate, Na⁺·C₈HN₄O₂⁻·2H₂O, two independent sodium ions, located on inversion centers, are coordinated by four water molecules each and additionally by two cyano groups for one and two carbonyl groups for the other. The luminescence spectra in solution are unaffected by the nature of the cation but vary strongly with the dielectric constant of the solvent. In the solid state, the emission maxima vary with structural features; the redshift of the maximum luminescence varies inversely with the distance between the stacked anions.     

An O3‐type Oxide with Low Sodium Content as the Phase‐Transition‐Free Anode for Sodium‐Ion Batteries

Layered transition metal oxides Na_xMO₂ (M=transition metal) with P2 or O3 structure have attracted attention in sodium‐ion batteries (NIBs). A universal law is found to distinguish structural competition between P2 and O3 types based on the ratio of interlayer distances of the alkali metal layer d_(O‐Na‐O) and transition‐metal layer d_(O‐M‐O). The ratio of about 1.62 can be used as an indicator. O3‐type Na_0.66Mg_0.34Ti_0.66O₂ oxide is prepared as a stable anode for NIBs, in which the low Na‐content (ca. 0.66) usually undergoes a P2‐type structure with respect to Na_xMO₂. This material delivers an available capacity of about 98 mAh g^?1 within a voltage range of 0.4–2.0 V and exhibits a better cycling stability (ca. 94.2 % of capacity retention after 128 cycles). In situ X‐ray diffraction reveals a single‐phase reaction in the discharge–charge process, which is different from the common phase transitions reported in O3‐type electrodes, ensuring long‐term cycling stability.     

A Regularly Channeled Lamellar Membrane for Unparalleled Water and Organics Permeation

Lamellar membranes show exceptional molecular permeation properties of key importance for many applications. However, their design and development need the construction of regular and straight interlayer channels and the establishment of corresponding transport rate equation. The fabrication of a uniformly lamellar membrane is reported using double‐layered Ti₃C₂T_x MXenes as rigid building blocks. This membrane possesses ordered and straight 2 nm channels formed via a direct self‐stacking, in contrast to the conventional irregular ones from flexible sheets. Such channels permit precise molecular rejection and unparalleled molecular permeation. The permeance of water and organics by this membrane reached 2300 and 5000 L m^?2 h^?1 bar^?1, respectively. The molecular transfer mechanism in confined nanochannels, and the corresponding model equation are established, paving a way to nanoscale design of highly efficient channeled membranes for transport and separation applications.     

Repair of defects created by Ar+ sputtering on graphite surface by annealing as confirmed using ToF‐SIMS and XPS

Defects were created on the surface of highly oriented pyrolytic graphite (HOPG) by sputtering with an Ar⁺ ion beam, then characterized using X‐ray photoelectron spectroscopy (XPS) and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) at 500°C. In the XPS C1s spectrum of the sputtered HOPG, a sp³ carbon peak appeared at 285.3 eV, representing surface defects. In addition, 2 sets of peaks, the C_x⁻ and C_xH⁻ ion series (where x = 1, 2, 3...), were identified in the ToF‐SIMS negative ion spectrum. In the positive ion spectrum, a series of C_xH₂^+• ions indicating defects was observed. Annealing of the sputtered samples under Ar was conducted at different temperatures. The XPS and ToF‐SIMS spectra of the sputtered HOPG after 800°C annealing were observed to be similar to the spectra of the fresh HOPG. The sp³ carbon peak had disappeared from the C1s spectrum, and the normalized intensities of the C_xH⁻ and C_xH₂^+• ions had decreased. These results indicate that defects created by sputtering on the surface of HOPG can be repaired by high‐temperature annealing.     

A Two‐Dimensional Zirconium Carbide by Selective Etching of Al3C3 from Nanolaminated Zr3Al3C5

The room‐temperature synthesis of a new two‐dimensional (2D) zirconium‐containing carbide, Zr₃C₂T_z MXene is presented. In contrast to traditional preparation of MXene, the layered ternary Zr₃Al₃C₅ material instead of MAX phases is used as source under hydrofluoric acid treatment. The structural, mechanical, and electronic properties of the synthesized 2D carbide are investigated, combined with first‐principles density functional calculations. A comparative study on the structrual stability of our obtained 2D Zr₃C₂T_z and Ti₃C₂T_z MXenes at elevated temperatures is performed. The obtained 2D Zr₃C₂T_z exhibits relatively better ability to maintain 2D nature and strucural integrity compared to Ti‐based Mxene. The difference in structural stability under high temperature condition is explained by a theoretical investigation on binding energy.     

Photofragmentation of 2‐Deoxy‐D‐Ribose Molecules in the Gas Phase

We have measured the synchrotron‐induced photofragmentation of isolated 2‐deoxy‐D ‐ribose molecules (C₅H₁₀O₄) at four photon energies, namely, 23.0, 15.7, 14.6, and 13.8 eV. At all photon energies above the molecule′s ionization threshold we observe the formation of a large variety of molecular cation fragments, including CH₃⁺, OH⁺, H₃O⁺, C₂H₃⁺, C₂H₄⁺, CH_xO⁺ (x=1,2,3), C₂H_xO⁺ (x=1–5), C₃H_xO⁺ (x=3–5), C₂H₄O₂⁺, C₃H_xO₂⁺ (x=1,2,4–6), C₄H₅O₂⁺, C₄H_xO₃⁺ (x=6,7), C₅H₇O₃⁺, and C₅H₈O₃⁺. The formation of these fragments shows a strong propensity of the DNA sugar to dissociate upon absorption of vacuum ultraviolet photons. The yields of particular fragments at various excitation photon energies in the range between 10 and 28 eV are also measured and their appearance thresholds determined. At all photon energies, the most intense relative yield is recorded for the m/q=57 fragment (C₃H₅O⁺), whereas a general intensity decrease is observed for all other fragments— relative to the m/q=57 fragment—with decreasing excitation energy. Thus, bond cleavage depends on the photon energy deposited in the molecule. All fragments up to m/q=75 are observed at all photon energies above their respective threshold values. Most notably, several fragmentation products, for example, CH₃⁺, H₃O⁺, C₂H₄⁺, CH₃O⁺, and C₂H₅O⁺, involve significant bond rearrangements and nuclear motion during the dissociation time. Multibond fragmentation of the sugar moiety in the sugar–phosphate backbone of DNA results in complex strand lesions and, most likely, in subsequent reactions of the neutral or charged fragments with the surrounding DNA molecules.     

Lithium storage properties of Ti3C2Tx (Tx = F,Cl, Br) MXenes

In this work, Ti₃C₂T_x MXene with -F, -Cl and -Br surface terminations are synthesized and the effect of these halogen terminations on the lithium storage properties is investigated. A maximum Li⁺ storage capacity of 189 mAh/g is achieved with Ti₃C₂Br_x MXene much higher than Ti₃C₂Cl_x and Ti₃C₂F_x with 138 mAh/g and 123 mAh/g, respectively. Density functional theory (DFT) calculation shows that the adsorption formation energy of halogen atoms on Ti atoms follows the trend of Ti-F > Ti-Cl > Ti-Br, leading to the same trend in the content of terminations on corresponding MXenes. In addition, inevitable exposure of MXene to oxygen causes competition between halogen and oxygen. Theoretical results show Ti₃C₂Br_x MXene has the highest Ti to O ratio and the lowest Ti to Br ratio, the high lithium affinity of O explains the maximum Li-ion storage capacity with Ti₃C₂Br_x MXene. This work shed light on the opportunity for achieving improved lithium storage properties of MXene electrodes by regulating the surface chemistry.