New transesterification reaction between acetylated wood and tetramethoxysilane: A feasibility study

Novel transesterification of acetylated maritime pine sapwood (Pinus pinaster Soland) reaction was performed with tetramethoxysilane (TMOS) in presence of dibutyltin oxide as a catalyst. Transesterification was confirmed by weight percent gain calculations (WPG), infrared spectroscopy (FTIR) as well as ¹³C and ²⁹Si NMR CP-MAS analysis. The results showed that transesterification indeed occurs via exchange of acetate groups from acetylated wood and methoxysilane groups from TMOS. The effect of temperatures and reaction time upon transesterification efficiency was also investigated.     

A concise methodology for the synthesis of (−)-Δ-tetrahydrocannabinol and (−)-Δ-tetrahydrocannabivarin metabolites and their regiospecifically deuterated analogs

The availability of tetrahydrocannabinols (Δ⁹-THC), tetrahydrocannabivarins (Δ⁹-THCV), and their metabolites in both their undeuterated and deuterated forms is critical for the analysis of biological and toxicological samples. We report here a concise methodology for the syntheses of (−)-Δ⁹-THC and (−)-Δ⁹-THCV metabolites in significantly improved overall yields using commercially available starting materials. Our approach allowed us to obtain the key intermediates (6aR,10aR)-9-nor-9-oxo-hexahydrocannabinols in four steps from (+)-(1R)-nopinone. This was followed by an optimized Shapiro reaction to give the (−)-11-nor-9-carboxy-metabolites, which were converted to their respective (−)-11-hydroxy analogs. The synthetic sequence involves a minimum number of steps, avoids undesirable oxidative conditions, and incorporates the costly deuterated resorcinols near the end of the synthetic sequence. This methodology enabled us to synthesize eight regiospecifically deuterated (−)-Δ⁹-THC and (−)-Δ⁹-THCV metabolites in a preparative scale and high optical purity without deuterium scrambling or loss.     

Synthesis of substituted tetrahydron-1H-carbazol-1-one and analogs via PhI(OCOCF3)2-mediated oxidative C–C bond formation

A variety of tetrahydro-1H-carbazol-1-ones and analogs were conveniently synthesized from the reaction of the corresponding 2-(phenylamino)cyclohex-2-enone with hypervalent iodine reagent PhI(OCOCF₃)₂ (PIFA), through a direct intramolecular oxidative C(sp²)–C(sp²) bond formation. This approach realized the construction of the biologically important tetrahydro-1H-carbazol-1-one and tetrahydrocyclohepta[b]indol-6(5H)-one skeletons. The mechanism of the process was proposed and briefly discussed.     

Synthesis and H NMR spectroscopic properties of substituted (η-tetraarylcyclobutadiene)(η-cyclopentadienyl)cobalt metallocenes

The reaction of diarylacetylenes with CoCl(PPh₃)₃ and sodium cyclopentadienylide or sodium carbomethoxycyclopentadienylide gave (η⁴-tetra-arylcyclobutadiene)(η⁵-cyclopentadienyl)cobalt and (η⁴-tetra-arylcyclobutadiene)(η⁵-carbomethoxycyclopentadienyl)cobalt, respectively, where aryl = para-XC₆H₄ (X = CF₃, F, MeO). The reaction was unsuccessful for the synthesis of (η⁴-tetra(para-methoxyphenyl)cyclobutadiene)(η⁵-cyclopentadienyl)cobalt, which was synthesised instead from dicarbonyl(η⁵-cyclopentadienyl)cobalt. In all of the examples starting with CoCl(PPh₃)₃ an intermediate (η⁵-cyclopentadienyl)- or (η⁵-carbomethoxycyclopentadienyl)(triphenylphosphine)-2,3,4,5-tetraarylcobaltacyclopentadiene complex was isolated, and two examples were characterised by X-ray crystallography. Heating the (η⁵-cyclopentadienyl)- or (η⁵-carbomethoxycyclopentadienyl)(triphenylphosphine)-2,3,4,5-tetraarylcobaltacyclopentadiene complexes resulted in clean conversion to the corresponding metallocenes. The influence of the para-aryl substituents on the ¹H NMR of the cyclopentadienyl moiety is tabulated, together with the influence of a range of R substituents in (η⁴-tetraphenylcyclobutadiene)(η⁵-RC₅H₄)cobalt (R = CO₂Me, CH₂OH, Me, CHO, CCH, CO₂H, CN, CONHR¹, 2-oxazolinyl, NH₂, NHAc, HgCl, Br, I, SiMe₃, SnMe₃, Ph).     

Transesterification kinetics in the reactive blends of liquid crystalline copolyesters and poly(ethylene terephthalate)

The transesterification kinetics of poly(ethylene terephthalate) (PET)/copoly(oxybenzoate-p-terephthalate) (liquid crystalline polymer, LCP) (70/30 by weight) in the presence of small amount of bis(2-oxazoline) (BOZ) as chain extender was studied by using 1H nuclear magnetic resonance. The kinetic data was treated as a second-order reversible reaction, and it was found that the rate constants of transesterification at 270, 280 and 290 °C were 1.55×10⁻², 2.20×10⁻² and 3.01×10⁻² min⁻¹, respectively, the value of which was higher than the blend without addition of BOZ, 1.26×10⁻² min⁻¹, and the activation energy of PET/LCP transesterification was 84.4 kJ mol⁻¹.     

Towards high molecular weight poly(bisphenol a carbonate) with excellent thermal stability and mechanical properties by solid-state polymerization

Poly(bisphenol A carbonate) (BPA-PC) was post-polymerized by solid-state polymerization (SSP) after supercritical CO₂-induced crystallization in low molecular weight particles prepolymerized via melt transesterification reaction. The effects of the crystallization conditions on melting behavior and SSP of BPA-PC were investigated with differential scanning calorimetry (DSC), Ubbelohde viscosity method and gel permeation chromatography (GPC). The reaction kinetics of the SSP of crystallized prepolymers was studied as a function of reaction temperatures for various reaction periods. As a result, the viscosity average molecular weight of BPA-PC particles (2 mm) increased from 1.9 × 10⁴ g/mol to 2.8 × 10⁴ g/mol after SSP. More importantly, the significantly enhanced thermal stability and mechanical properties of solid-state polymerized BPA-PC, compared with those of melt transesterification polymerized BPA-PC with the same molecular weight, can be ascribed to the substantial avoidance of undergoing high temperature during polymerization. Our work provides a useful method to obtain practical product of BPA-PC with high quality and high molecular weight.     

Nucleophilic substitution of nitro groups by [F]fluoride in methoxy-substituted ortho-nitrobenzaldehydes—A systematic study

As model reactions for the introduction of [¹⁸F]fluorine into aromatic amino acids, the replacement of NO₂ by [¹⁸F]fluoride ion in mono- to tetra-methoxy-substituted ortho-nitrobenzaldehydes was systematically investigated. Unexpectedly, the highly methoxylated precursors 2,3,4-trimethoxy-6-nitrobenzaldehyde and 2,3,4,5-tetramethoxy-6-nitrobenzaldehyde showed high maximum radiochemical yields (82% and 48% respectively). When the electrophilicity of the leaving group substituted carbon atom is expressed by its ¹³C NMR chemical shift a good correlation with the reaction rate at the beginning of the reaction (first min) was found (R² = 0.89), whereas the maximum radiochemical yields correlated much poorer with this electrophilicity parameter. This may be caused by side reactions becoming influencial in the further reaction course. As possible side reactions the demethylation of methoxy groups and intramolecular redox reactions could be detected by HPLC/MS.     

Potentiometric flow injection determination of manganese(II) by using a hexacyanoferrate(III)-hexacyanoferrate(II) potential buffer

A highly sensitive potentiometric flow injection analysis method for the determination of manganese(II), utilizing a redox reaction with hexacyanoferrate(III) in near neutral media containing ammonium citrate is described. The analytical method is based on the detection of the change in potential of a flow-through type redox electrode detector, resulting from the composition change of an [Fe(CN)₆]³⁻-[Fe(CN)₆]⁴⁻ potential buffer solution. A linear relationship between the potential change (peak height) and the concentration of manganese(II) was found. Manganese(II) in a wide concentration range from 10⁻⁴ to 10⁻⁷ M could be determined by appropriately altering the concentration of the potential buffer from 10⁻³ to 10⁻⁵ M. The lower detection limit of manganese(II) was determined to be 1×10⁻⁷ M. The sampling rate and relative standard deviation were 20 h⁻¹ and 1.9% (n=8) for 6×10⁻⁶ M manganese(II), respectively. The proposed method was successfully applied to the determination of manganese(II) in actual soil samples obtained from tea fields. Analytical results obtained by the proposed method were in good agreement with those obtained by an atomic absorption spectrophotometric method.     

Crosslinking and ageing of C labelled polyisoprene part 1: Synthesis and polymerisation of 4-C-isoprene

4-¹³C-isoprene was prepared by the Wittig reaction. All reaction steps were optimised using unlabelled compounds. By reaction with triphenyl phosphine, ¹³C labelled methyl iodide afforded labelled methyl-triphenyl phosphine iodide in 84% yield. This reacted with meth acrolein with production of 4-¹³C-isoprene in 64% yield. Labelled polyisoprene was prepared by anionic polymerisation initiated by t-butyl lithium. Based on ¹³CH₃I the overall yield is ca 30%. The polymer was characterized by ¹H and ¹³C NMR spectroscopy. The contribution of each microstructure was [cis 1-4, 72%]; [trans 1-4, 10%]; [3-4, 18%].     

Products of hydrolysis of C,N-chelated triorganotin(IV) chlorides and use of products as catalysts in transesterification reactions

Triorganotin(IV) chlorides containing one L^CN chelating ligand were hydrolyzed with an excess of sodium hydroxide. The composition of the products is strongly dependent on the nature of the organic groups bound to the tin atom. Di(n-butyl)tin, dimethyltin as well as the diphenyl derivative exhibits an equilibrium between hydroxide and stannoxane forms (oxide), whereas alkyltin species react spontaneously and reversibly with carbon dioxide present in the air to form carbonate species. On the other hand, diphenyl derivatives display virtually no reaction with CO₂ towards carbonates, while the di-t-butyl-substituted tin derivative is stable under the same experimental condition and remains as a tin hydroxide. In the case of the dimethyltin derivative, a methyl group migration was observed with displacement of one L^CN chelating ligand during the reaction on the air. The coordination geometry of the tin central atom(s) of all studied compounds can be described as trigonal bipyramidal with a dative bonded dimethylamino group occupying one coordination site. The catalytic activity of these compounds in transesterification reactions is generally lower compared to the systems reported in the literature, with the exception of the transesterification of ethyl acetate by cyclohexanol which displays a remarkable activity.     

Strategic Evaluation of the Traceless Staudinger Ligation for Radiolabeling with the Tricarbonyl Core

The traceless Staudinger ligation with its two variants is a powerful biorthogonal conjugation method not only for the connection of biomolecules, but also for the introduction of fluorescence- or radiolabels under mild reaction conditions. Herein, the strategic evaluation of the traceless Staudinger ligation for radiolabeling ^99mTc using the fac-[Tc(CO)₃]⁺ core is presented. A convenient and high-yielding three-step synthetic procedure of dipicolylamine-based phosphanols as ligands for the mild radiolabeling was developed. The labeling was accomplished using a tricarbonyl kit and a ^99mTc-pertechnetate generator eluate showing 87% radiochemical conversion. The respective rhenium-based, non-radioactive reference compounds were synthesized using (Et₄N)₂[Re(CO)₃Br₃] as precursor. All products were analyzed by NMR, MS, and elemental analysis. Additional XRD analyses were performed.     

Synthesis and characterization of some novel cadmium(II) complexes with 3-hydroxypicolinic acid (3-OHpicH): Crystal and molecular structures of [CdI(3-OHpic)(3-OHpicH)(H2O)]2, [Cd(3-OHpic)2(H2O)2] and [Cd(3-OHpic)2]n

Cadmium(II) complexes of 3-hydroxypicolinic acid, namely [CdI(3-OHpic)(3-OHpicH)(H₂O)]₂ (1), [Cd(3-OHpic)₂(H₂O)₂] (2) and [Cd(3-OHpic)₂]_n (3) were prepared and characterized by spectroscopic methods (IR, NMR) and their molecular and crystal structures were determined by X-ray crystal structure analysis. Complexes 1 and 2 were prepared in similar reaction conditions using different cadmium(II) salts: cadmium(II) iodide and cadmium(II) acetate dihydrate, respectively, while 3 was prepared by recrystallization of 2 from N,N-dimethylformamide solution. Various coordination modes of 3-OHpicH in 1–3 were established in the solid state: bidentate N,O-chelated mode in 1 and 2, monodentate mode through the carboxylate O atom from zwitterionic ligand in 1 and bidentate N,O-chelated and bridging mode in 3. In the DMF solution of all prepared complexes, only monodentate mode of 3-OHpicH binding to cadmium(II) through the carboxylate O atom was established by ¹H, ¹³C, ¹⁵N and ¹¹³Cd NMR spectroscopy.     

Synthesis and characterization of new soluble fluorinated seco-porphyrazines

Magnesium porphyrazinate substituted with eight 3,5-bis(trifluoromethyl)phenyl groups on the peripheral positions has been synthesized by the cyclotetramerization of 3,4-[3,5-bis(trifluoromethyl)phenyl]pyrroline-2,5-diimine in the presence of magnesium butanolate. Acid-mediated demetallation of the magnesium porphyrazine resulted in peripheral oxidation of one pyrrole ring to reveal the seco-porphyrazine, octakis[3,5-bis(trifluoromethyl)phenyl]-2-seco-porphyrazine-2,3-dione. Further reaction of this product with copper (II) acetate, zinc (II) acetate and cobalt (II) acetate has led to the metallo-derivatives, {octakis[3,5-bis(trifluoromethyl)phenyl]-2-seco-2,3-dioxoporphyrazinato} M(II) [M = Cu(II), Zn(II), Co(II)]. These new soluble complexes were characterized by elemental analysis, together with FT-IR, ¹H NMR, ¹³C NMR, ¹⁹F NMR, UV-Vis and mass spectral data.     

Diphenyllead(IV) thiosemicarbazonates and pyrazolonates: Synthesis and characterization

Cyclization of thiosemicarbazones derived from β-keto esters and β-keto amides (HTSC) in the presence of diphenyllead(IV) acetate was explored in methanol solution at room temperature and under reflux. All β-keto ester TSCs underwent cyclization to give the corresponding pyrazolone (HL), which, except in one case, deprotonated and coordinated the PbPh₂²⁺ moiety to form homoleptic [PbPh₂(L)₂] or heteroleptic [PbPh₂(OAc)(L)] derivatives. Cyclization did not occur with β-keto amide TSCs and only [PbPh₂(TSC)₂] or [PbPh₂(OAc)(TSC)] thiosemicarbazonates were isolated. The complexes were characterized by IR spectroscopy in the solid state and by ¹H, ¹³C and ²⁰⁷Pb NMR spectroscopy in DMSO–d₆ solution, in which they evolve and decompose with time. Additionally, crystals of p-acetoacetanisidide thiosemicarbazone (HTSC¹⁰), [PbPh₂(OAc)(L⁵)] · MeOH (HL⁵ = 2,5-dihydro-3,4-dimethyl-5-oxo-1H-pyrazolone-1-carbothioamide), [PbPh₂Cl(L²)] (HL² = 2,5-dihydro-5-oxo-3-phenyl-1H-pyrazolone-1-carbothioamide), [PbPh₂(OAc)(TSC⁸)] · 2MeOH (HTSC⁸ = acetoacetanilide thiosemicarbazone), [PbPh₂(OAc)(TSC¹⁰)] · H₂O and [PbPh₂(OAc)(TSC¹¹)] · 0.75MeOH (HTSC¹¹ = o-acetoacetotoluidide) were studied by X-ray crystallography. The complexes, monomers or dimers with almost linear C–Pb–C moieties, are compared with the corresponding derivatives of Pb(II).     

Simplified synthesis, H, C, N, Sn NMR spectra and X-ray structures of diorganotin(IV) complexes containing the 4-phenyl-2,4-butanedionebenzoylhydrazone(2−) ligand

Two diorganotin(IV) complexes of the general formula R₂Sn[Ph(O)CCH-C(Me)N-NC(O)Ph] (R=Ph, 1; R=Me, 2) have been synthesised from the corresponding diorganotin(IV) dichloride and the ligand 4-phenyl-2,4-butanedionebenzoylhydrazone(2−) (H₂L), derived from benzoyl acetone and benzoyl hydrazide in methanol at room temperature in presence of triethylamine. The syntheses were performed under very mild conditions, at room temperature and without exclusion of air or moisture from the reaction vessel. Previously, rigorous conditions have been considered necessary for these species. The two compounds have been characterised by elemental analysis, IR and ¹H, ¹³C, ¹⁵N, ¹¹⁹Sn NMR spectra, and their structures have been confirmed single crystal X-ray structure analysis. The central tin atom of both complexes adopts a distorted trigonal bipyramidal coordination with two ligand oxygen atoms in axial positions, the nitrogen atom of the ligand and two organic groups on tin occupying equatorial sites. 2 has crystallised with two crystallographically independent molecules in the asymmetric unit. The δ(¹¹⁹Sn) values for the complexes 1 and 2 are −151.5 and −146.8 ppm, respectively, thus indicating penta-coordinated tin centres.     

PC/EAA共混体系在加工过程中的反应

采用差示扫描量热法(DSC)和核磁共振氢谱法(1H-NMR)研究了不同聚碳酸酯(PC)/乙烯-丙烯酸共聚物(EAA)共混体系在加工过程中的大分子反应,考察了有机金属催化剂二丁基锡DBTO)含量和反应时间对体系的影响.采用哈克(Haake)转矩流变仪的混合器作反应釜,索氏抽提器分离产物.结果表明,PC和EAA在加工中反应剧烈,在共混体系的界面原位形成接枝或交联的PC-EAA共聚物,随催化剂用量增大、反应时间延长易生成共交联的PC-EAA共聚物.但混合时间过长,体系的断链反应会加剧,生成产物不稳定.     

Synthesis, characterization and antimicrobial activity of palladium(II) complexes with some alkyl derivates of thiosalicylic acids: Crystal structure of the bis(S-benzyl-thiosalicylate)-palladium(II) complex, [Pd(S-bz-thiosal)2]

S-Alkyl (R = benzyl, methyl, ethyl, propyl and butyl) derivatives of thiosalicylic acid and the corresponding palladium(II) complexes were prepared and their structures were proposed on the basis of infrared, ¹H and ¹³C NMR spectroscopy. The cis geometrical configurations of the isolated complexes were proposed on the basis of an X-ray structural study of the bis(S-benzyl-thiosalicylate)-palladium(II), [Pd(S-bz-thiosal)₂] complex.Antimicrobial activity of the tested compounds was evaluated by determining the minimum inhibitory concentration (MIC) and minimum microbicidal concentration (MMC) in relation to 26 species of microorganisms. The tested ligands, with a few exceptions, show low antimicrobial activity. The palladium(II) complexes, [Pd(S-R-thiosal)₂], have statistically significant higher activity than the corresponding ligands. The complexes [Pd(S-et-thiosal)₂] and [Pd(S-pro-thiosal)₂] displayed the strongest activity amongst the all tested compounds. The palladium(II) complexes show selective and moderate antibacterial activity and significant antifungal activity. The most sensitive were Aspergillus fumigatus and Aspergillus flavus.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA

Silica-PMMA nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1-5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of transmission electron microscopy (TEM), X-ray diffractometry (XRD), dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), Fourier-transform infrared spectroscopy (FTIR), ¹³C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy (¹³C{¹H} CP-MAS NMR) and measures of proton spin-lattice relaxation time in the rotating frame (T_1ρ(H)), in the laboratory frame (T₁(H)) and cross-polarization times (T_CH). Results showed that silica nanoparticles are well dispersed in the polymeric matrix whose structure remains amorphous. The degradation of the polymer occurs at higher temperature in the presence of silica because of the interaction between the two components.     

Synthesis of [F]xenon difluoride as a radiolabeling reagent from [F]fluoride ion in a micro-reactor and at production scale

[¹⁸F]Xenon difluoride ([¹⁸F]XeF₂), was produced by treating xenon difluoride with cyclotron-produced [¹⁸F]fluoride ion to provide a potentially useful agent for labeling novel radiotracers with fluorine-18 (t_1/2 = 109.7 min) for imaging applications with positron emission tomography. Firstly, the effects of various reaction parameters, for example, vessel material, solvent, cation and base on this process were studied at room temperature. Glass vials facilitated the reaction more readily than polypropylene vials. The reaction was less efficient in acetonitrile than in dichloromethane. Cs⁺ or K⁺ with or without the cryptand, K 2.2.2, was acceptable as counter cation. The production of [¹⁸F]XeF₂ was retarded by K₂CO₃, suggesting that generation of hydrogen fluoride in the reaction milieu promoted the incorporation of fluorine-18 into xenon difluoride. Secondly, the effect of temperature was studied using a microfluidic platform in which [¹⁸F]XeF₂ was produced in acetonitrile at elevated temperature (≥85 °C) over 94 s. These results enabled us to develop a method for obtaining [¹⁸F]XeF₂ on a production scale (up to 25 mCi) through reaction of [¹⁸F]fluoride ion with xenon difluoride in acetonitrile at 90 °C for 10 min. [¹⁸F]XeF₂ was separated from the reaction mixture by distillation at 110 °C. Furthermore, [¹⁸F]XeF₂ was shown to be reactive towards substrates, such as 1-((trimethylsilyl)oxy)cyclohexene and fluorene.