Coexistence of wave propagation and oscillation in the photosensitive Belousov-Zhabotinsky reaction on a circular route

The photosensitive Belousov-Zhabotinsky (BZ) reaction was investigated on a circular ring, which was drawn using computer software and then projected on a film soaked with BZ solution using a liquid-crystal projector. Under the initial conditions, a chemical wave propagated with a constant velocity on the black ring under a bright background. When the background was rapidly changed to dark, coexistence of the oscillation on part of the ring and propagation of the chemical wave on the other part was observed. These experimental results are discussed in relation to the nature of the photosensitive BZ reaction and theoretically reproduced based on a reaction-diffusion system using the modified Oregonator model.     

Membrane protein selectively oriented on solid support and reconstituted into a lipid membrane

Mimetic functional membranes on solid support are now emerging for the development of membrane biosensor or for the study of membrane-mediated processes and should have an important impact on biodiagnostics. We established a method to reconstitute a membrane protein into a lipid membrane in a selective orientation on a solid support. Membrane protein OprM, a component of OprM-MexA-MexB multidrug efflux pump, solubilized in detergent was immobilized via its extracellular domain on aminosilane-modified silica surface. The oriented protein was reconstituted into a lipid membrane by detergent removal. The membrane protein reconstitution process carried out on silica nanoparticles and on planar silica surfaces was followed by cryo-electron microscopy (cryo-EM) and quartz crystal microbalance with dissipation monitoring (QCM-D) respectively. The selective protein orientation on aminosilane-modified silica surface was assessed by cryo-EM and was compared to the nonspecific protein deposition on silica surface. Finally, the binding of MexA, a periplasmic component of the tripartite efflux complex, was monitored with QCM-D on the oriented OprM protein monolayer. The large adsorbed mass gave a direct evidence of the high affinity of MexA with the periplasmic helical part of OprM.     

Electrooxidation of methanol on upd-Ru and upd-Sn modified Pt electrodes

The electrochemical oxidation of methanol has been investigated on underpotentially deposited-ruthenium-modified platinum electrode (upd-Ru/Pt) and on underpotentially deposited-tin-modified platinum electrode (upd-Sn/Pt). The submonolayers of upd-Ru and upd-Sn on a Pt electrode increased the rate of methanol electrooxidation several times as large as that on a pure Pt electrode. The best performance for methanol electrooxidation was obtained on a ternary platinum based catalyst modified by upd-Ru and upd-Sn simultaneously. The influence of the submonolayers of upd-Ru adatoms and upd-Sn adatoms on the oxidation of methanol in acid has been investigated. The effect of Ru on methanol electrooxidation lies on the distribution of Ru adatoms on a Pt surface. It has been shown that as long as the amount of upd-Ru deposits were controlled in a proper range, upd-Ru deposits would enhance the methanol oxidation obtained on a Pt electrode at whichever deposition potential the upd-Ru deposits were obtained. The effects of tin are sensible to the potential range. The enhancement effect of upd-Sn adatoms for the oxidation of methanol will disappear as the electrode potential is beyond a certain value. It is speculated that there exists a synergetic effect on the Pt electrode as adatoms Ru and Sn participate simultaneously in the methanol oxidation.     

Wicking and spreading of water droplets on nanotubes

Recently, there has been intensive research on the use of nanotechnology to improve the wettability of solid surfaces. It is well-known that nanostructures can improve the wettability of a surface, and this is a very important safety consideration in regard to the occurrence of boiling crises during two-phase heat transfer, especially in the operation of nuclear power plant systems. Accordingly, there is considerable interest in wetting phenomena on nanostructures in the field of nuclear heat transfer. Much of the latest research on liquid absorption on a surface with nanostructures indicates that liquid spreading is generated by capillary wicking. However, there has been comparatively little research on how capillary forces affect liquid spreading on a surface with nanotubes. In this paper, we present a visualization of liquid spreading on a zircaloy surface with nanotubes, and establish a simple quantitative method for measuring the amount of water absorbed by the nanotubes. We successfully describe liquid spreading on a two-dimensional surface via one-dimensional analysis. As a result, we are able to postulate a relationship between liquid spreading and capillary wicking in the nanotubes.     

Conformity assessment and metrology: update on the state of affairs

A couple of years ago, ISO CASCO launched a major project of transforming all the existing ISO Guides on conformity assessment to a comprehensive series of ISO standards 17000 being now in various stages of development. As the concept of traceability underpinning all measurements has been a basic mission of metrology, a number of these standards have a direct bearing on metrology. The series is logically based on a definition standard, ISO 17000, giving, among others, a guidance which activities fall under conformity assessment. The fact that calibration does not, might have important consequences which must yet be assessed. A controversial discussion on some issues has been in progress concerning ISO 17011 on accreditation bodies which touches both on national metrology institutes (NMIs) with an accreditation function and on calibration labs at large. ISO 17040 on peer review could be used with an advantage to support mutual recognition arrangements among a limited number of bodies of a specialized expertise (e.g., CIPM MRA among NMIs under the Metre Convention). ISO 17025 has been the most important standard for the metrology community and has undergone a major overhaul taking on board the uncovered requirements from ISO 9001:2000. In general, the paper will give an update on the developments outlined above and discuss the consequences and further steps from the viewpoint of metrology.     

Dielectrophoretic manipulation of a single chlorella cell with dual-microdisk electrode

Dielectrophoretic manipulation of a single chlorella cell was performed using a dual-microdisk electrode, which consists of two Pt-Rh ultrafine wires (ca. 1-microm radius) sealed in a glass capillary. An attractive or repulsive force was induced on the chlorella depending on the frequency of the ac voltage applied between the two disk electrodes. To avoid the direct contact of a chlorella with the metal, a dual electrode with retracted disks was fabricated and used for forming a micropattern of chlorellas at a solid substrate. The effect of both the frequency and ion concentration of the solutions on the dielectrophoretic force exerted on a chlorella cell was investigated in detail based on the theories of dielectrophoresis.     

Lipid bilayer membrane with atomic step structure: supported bilayer on a step-and-terrace TiO2(100) surface

The formation of a supported planar lipid bilayer (SPLB) and its morphology on step-and-terrace rutile TiO 2(100) surfaces were investigated by fluorescence microscopy and atomic force microscopy. The TiO 2(100) surfaces consisting of atomic steps and flat terraces were formed on a rutile TiO 2 single-crystal wafer by a wet treatment and annealing under a flow of oxygen. An intact vesicular layer formed on the TiO 2(100) surface when the surface was incubated in a sonicated vesicle suspension under the condition that a full-coverage SPLB forms on SiO 2, as reported in previous studies. However, a full-coverage, continuous, fluid SPLB was obtained on the step-and-terrace TiO 2(100) depending on the lipid concentration, incubation time, and vesicle size. The SPLB on the TiO 2(100) also has step-and-terrace morphology following the substrate structure precisely even though the SPLB is in the fluid phase and an approximately 1-nm-thick water layer exists between the SPLB and the substrate. This membrane distortion on the atomic scale affects the phase-separation structure of a binary bilayer of micrometer order. The interaction energy calculated including DLVO and non-DLVO factors shows that a lipid membrane on the TiO 2(100) gains 20 times more energy than on SiO 2. This specifically strong attraction on TiO 2 makes the fluid SPLB precisely follow the substrate structure of angstrom order.     

DC photoelectric signals from bacteriorhodopsin adsorbed on lipid monolayers and thiol/lipid bilayers supported by mercury

Purple membrane (PM) fragments were adsorbed on a dioleoylphosphatidylcholine (DOPC) monolayer and on a mixed alkanethiol/DOPC bilayer supported by mercury to investigate the kinetics of light-driven proton transport by bacteriorhodopsin (bR). The light-on and light-off capacitive currents on an alkanethiol/DOPC bilayer at pH 6.4 were interpreted on the basis of a simple equivalent circuit. The pH dependence of the biphasic decay kinetics of the light-on currents was analyzed to estimate the pK(a) values for the transitions releasing protons to, and taking up protons from, the solution. The linear dependence of the stationary light-on current of bR on a DOPC monolayer self-assembled on mercury upon the applied potential was interpreted on the basis of an equivalent circuit.     

Separation and detection of the isomeric equine conjugated estrogens, equilin sulfate and delta8,9-dehydroestrone sulfate, by liquid chromatography--electrospray-mass spectrometry using carbon-coated zirconia and porous graphitic carbon stationary phases

Equilin-3-sulfate and delta8,9-dehydroestrone-3-sulfate are two isomers found in equine conjugated estrogens that differ in structure only by the position of a double bond in the steroid B-ring. These geometric isomers were not resolved on a C18 column during the analysis of conjugated estrogen drug products by LC-MS using acetonitrile-ammonium acetate buffer as the mobile phase. While no separations of these two isomers were observed on C18 or other alkyl-bonded silica based phases using a variety of mobile phase conditions, partial separations were achieved on phenyl bonded silica phases with a resolution of 1.5 on a diphenyl phase, and baseline separations were readily achieved on two carbonaceous phases with resolutions routinely exceeding three on graphitic carbon-coated zirconia (Zr-CARB) and resolutions as high as 19 on porous graphitic carbon (Hypercarb). An examination of a selected few conjugated estrogens in the complex drug substance by LC-MS on Hypercarb is presented.     

Phase transitions of a polymer threading a membrane coupled to coil-globule transitions

We theoretically study phase transitions of a polymer threading through a pore imbedded in a membrane. We focus on the coupling between a partition of the polymer segments through the membrane and a coil-globule transition of the single polymer chain. Based on the Flory model for collapse transitions of a polymer chain, we calculate the fraction of polymer segments and the expansion factor of a polymer coil on each side of the membrane. We predict a first-order phase transition of a polymer threading a membrane; polymer segments in one side are discontinuously translocated into the other side, depending on solvent conditions and molecular weight of the polymer. We also discuss the equilibrium conformation of the polymer chain on each side of the membrane.     

Propagation of photosensitive chemical waves on the circular routes

The propagation of chemical waves in the photosensitive Belousov-Zhabotinsky (BZ) reaction was investigated using an excitable field in the shape of a circular ring or figure "8" that was drawn by computer software and then projected on a film soaked with BZ solution using a liquid-crystal projector. For a chemical wave in a circular reaction field, the shape of the chemical wave was investigated depending on the ratio of the inner and outer radii. When two chemical waves were generated on a field shaped like a figure "8" (one chemical wave in each circle) as the initial condition, the location of the collision of the waves either was constant or alternated depending on the degree of overlap of the two circular rings. These experimental results were analyzed on the basis of a geometrical discussion and theoretically reproduced on the basis of a reaction-diffusion system using a modified Oregonator model. These results suggest that the photosensitive BZ reaction may be useful for creating spatio-temporal patterns depending on the geometric arrangement of excitable fields.     

The surface enhanced Raman spectrum of 2,6-lutidine

The surface enhanced Raman spectrum of 2,6-lutidine adsorbed on a polycrystalline Ag surface is reported along with a discussion of the effect on the methyl vibrations of adsorption on the electrode. The observation of an AgN stretch and small shifts of the methyl vibrations on the surface lead to a model of the molecule-surface interaction. If the molecule is adsorbed on a (100) or (110) face, surface roughness on an atomic scale is required to explain the observations. If the molecule is adsorbed on a (111) face, no surface roughness need be invoked. In either case a metalnitrogen bond somewhere between the van der Waals (physisorbed) and covalent (chemisorbed) limits is indicated.     

DNA microarray synthesis by using PDMS molecular stamp (Ⅱ)——Oligonucleotide on-chip synthesis using PDMS stamp

Based on the standard phosphoramidites chemistry protocol, two oligonucleotides synthetic routes were studied by contact stamping reactants to a modified glass slide. Route A was a contact coupling reaction, in which a nucleoside monomer was transferred and coupled to reactive groups (OH) on a substrate by spreading the nucleoside activated with tetrazole on a polydimethylsiloxane (PDMS) stamp. Route B was a contact detritylation, in which one nucleoside was fixed on the desired synthesis regions where dimethoxytrityl (DMT) protecting groups on the 5'-hydroxyl of the support-bound nucleoside were removed by stamping trichloroacetic acid (TCA) distributed on features on a PDMS stamp. Experiments showed that the synthetic yield and the reaction speed of route A were higher than those of route B. It was shown that 20 mer oligonucleo-tide arrays immobilized on the glass slide were successfully synthesized using the PDMS stamps, and the coupling efficiency showed no difference between the PDMS stamping and the co     

Sodium chloride interaction with solvated and crystalline cellulose: sodium ion affects the cellotetraose molecule and the cellulose fibril in aqueous solution

Inorganic salts are a natural component of biomass which have a significant effect on the product yields from a variety of biomass conversion processes. Understanding their effect on biomass at the microscopic level can help discover their mechanistic role. We present a study of the effect of aqueous sodium chloride on the largest component of biomass, cellulose, focused on the thermodynamic and structural effect of a sodium ion on the cellotetraose molecule and the cellulose fibril. Replica exchange molecular dynamics simulations of a cellotetraose molecule reveal a number of preferred cellulose-Na contacts and bridging positions. Large scale MD simulations on a model cellulose fibril find that Na⁺ perturbs the hydroxymethyl rotational state population and consequently disrupts the ‘native’ hydrogen bonding network.     

Parallel Fock matrix construction program for molecular orbital calculation--specific computer with a hierarchical network

A parallel Fock matrix construction program for a hierarchical network has been developed on the molecular orbital calculation-specific EHPC system. To obtain high parallelization efficiency on the hierarchical network system, a multilevel dynamic load-balancing scheme was adopted, which provides equal load balance and localization of communications on a tree-structured hierarchical network. The parallelized Fock matrix construction routine was implemented into a GAMESS program on the EHPC system, which has a tree-structured hierarchical network. Benchmark results on a 63-processor system showed high parallelization efficiency even on the tree-structured hierarchical network.     

Influence of Mg^2＋ on Initial Stages of CaCO3 Scale Formed on Metal Surface

Magnesium ions, which exist in formation water and injection water under downhole conditions in the oil and gas production industry, are a key determinant in the CaCO3 scale formation. Many studies have focused their attention on the effect of magnesium on the kinetics, the morphology and the content of Mg in the Ca-CO3 scale. Little attention has been paid to the effect of Mg^2 on the initial stages of CaCO3 formation on a metal surface. In this study, an electrochemical technique was used to study the influence of Mg^2 on the ini-tial stages of CaCO3 scale formed on a metal surface. With this electrochemical technique, the reduction of the dissolved oxygen in an analysis solution is considered on the surface of a rotating disk electrode (RDE) un-der potentiostatic control. The rate of oxygen reduction on the surface of the RDE enables the extent of sur-face coverage of scale to be assessed. With this electrochemical technique, a new insight into the effect of Mg^2 on CaCO3 scale formed on a metal surface is given.     

Elastic shear modulus of biphasic gels

The effect on rheological properties on mixing one gel-forming and one nongelling polymer is investigated. It is found that on addition of a nongelling polymer to a constant amount of gel-forming polymer, the shear modulus of the resulting gel can either decrease or increase depending on the polymers. The results are interpreted within a simple qualitative model based on polymer incompatibility in combination with percolation theory and a uniform stress approximation.     

DNA microarray synthesis by using PDMS molecular stamp (II)

Based on the standard phosphoramidites chemistry protocol, two oligonucleotides synthetic routes were studied by contact stamping reactants to a modified glass slide. Route A was a contact coupling reaction, in which a nucleoside monomer was transferred and coupled to reactive groups (OH) on a substrate by spreading the nucleoside activated with tetrazole on a polydimethylsiloxane (PDMS) stamp. Route B was a contact detritylation, in which one nucleoside was fixed on the desired synthesis regions where dimethoxytrityl (DMT) protecting groups on the 5’-hydroxyl of the support-bound nucleoside were removed by stamping trichloroacetic acid (TCA) distributed on features on a PDMS stamp. Experiments showed that the synthetic yield and the reaction speed of route A were higher than those of route B. It was shown that 20 mer oligonucleotide arrays immobilized on the glass slide were successfully synthesized using the PDMS stamps, and the coupling efficiency showed no difference between the PDMS stamping and the conventional synthesis methods.     

DNA microarray synthesis by using PDMS molecular stamp (II) Oligonucleotide on-chip synthesis using PDMS stamp

Based on the standard phosphoramidites chemistry protocol, two oligonucleotides synthetic routes were studied by contact stamping reactants to a modified glass slide. Route A was a contact coupling reaction, in which a nucleoside monomer was transferred and coupled to reactive groups (OH) on a substrate by spreading the nucleoside activated with tetrazole on a polydimethylsiloxane (PDMS) stamp. Route B was a contact detritylation, in which one nucleoside was fixed on the desired synthesis regions where dimethoxytrityl (DMT) protecting groups on the 5’-hydroxyl of the support-bound nucleoside were removed by stamping trichloroacetic acid (TCA) distributed on features on a PDMS stamp. Experiments showed that the synthetic yield and the reaction speed of route A were higher than those of route B. It was shown that 20 mer oligonucleotide arrays immobilized on the glass slide were successfully synthesized using the PDMS stamps, and the coupling efficiency showed no difference between the PDMS stamping and the conventional synthesis methods.