Studies on the fluorescence quenching of polysilane copolymers by chlorohydrocarbons

The room-temperature solution fluorescence quenching of polysilane copolymers by chlorohydrocarbons such as CCl₄, CHCl₃, C₂Cl₆, and Cl₂CHCHCl₂ was studied. The existence of dynamic quenching was preliminarily demonstrated by the experiment of fluorescence lifetime quenching. The fluorescence quenching data were in conformity with the equation: F₀/F = (1+K_SV[Q])exp(NV[Q]), where F and F₀ are the fluorescence intensity with and without the addition of quencher, K_SV is the Stern-Volmer constant, [Q] is the quencher concentration, N is the Avogadro constant, and V is the volume of the active sphere. The fluorescence quenching by the first three chlorohydrocarbons was attributed to the contemporaneous effect of dynamic quenching and static quenching. There exists, at least mathematically, a critical quencher concentration [Q]_C. When the quencher concentration [Q] < [Q]_C, the fluorescence quenching is dominated by the dynamic quenching part; when [Q] > [Q]_C, it is dominated by the static quenching part. However, the fluorescence quenching by Cl₂CHCHCl₂ was attributed to only static quenching. Furthermore, it was proposed that the dynamic quenching may be related with the electrical positivity of the central carbon nucleus of the quenching molecules while the static quenching may be caused by the “outside heavy atom effect” of the Cl element. © 1996 John Wiley & Sons, Inc.     

Partitioning of unsaturated hydrophilic monomer in microemulsion media monitored by pyrene fluorescence method

The extent of intra‐ and interchain associations of (un)charged water‐soluble monomers in the homogeneous and micellar solutions was studied with steady‐state fluorescence spectroscopy. Fluorescence spectroscopic experiments were performed on uncharged (acryl amide) and charged hydrophilic monomers [zwitterionic 3‐dimethyl(methacryloyloxyethyl)ammonium propane sulfonate (DMAPS), etc.] with pyrene as a probe. In both the homogeneous and micellar solutions, linear Stern–Volmer plots were obtained that implied that the quenching process can be considered as totally dynamic. The Stern–Volmer constant (K_SV) for DMAPS decreased with an increasing dielectric constant of solvent and the concentration of simple electrolyte. An abrupt decrease in K_SV was observed in the presence of a small amount of anionic emulsifier [below the critical micelle concentration (cmc)]. The dependence of K_SV on pH for DMAPS was described by a curve with a maximum at about pH = 7. This was interpreted in terms of segregation of DMAPS and the variation of a optimal microenvironment for the probe and quencher with pH. The quenching rate in the micellar solutions strongly increased above the cmc but was lower than that in the homogeneous solutions. In the micellar solutions (above the cmc), the microenvironment for an interaction between the probe and quencher was suggested to be the whole microdroplet. The dependence of K_SV on pH for DMAPS is described by a curve with a maximum at about pH = 9.3. The synergistic effect arises from the segregation of charged quencher molecules within the microdroplets. The complex (or strong interaction) between quencher and additive(s) is supposed to increase the dynamic nature of microdroplets that provides an optimal microenvironment for probe and quencher. A good coemulsifier, however, removes quencher from the interface and creates a barrier for entering monomer (quencher) into the core of micelles; therefore, quenching is depressed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 571–581, 2003     

Amphiphilic block copolymer of 9-vinylphenanthrene and methacrylic acid: Fluorescence quenching of phenanthrene residue in aqueous medium

Amphiphilic block copolymers of 9-vinylphenanthrene (VPh) and methacrylic acid (MA) were prepared by a two-step living anionic polymerization of VPh and trimethylsilyl methacrylate followed by hydrolysis of the trimethylsilyl ester groups. Bis(2-hydroxyethyl) terephthalate, an oxidative quenching agent with amphiphilic nature, strongly quenched the fluorescence of phenanthrene groups in the block copolymer in aquecus solution. Apparent second-order rate constants k_q for the quenching ranged in the magnitude of 10¹¹?10¹²M^?1 s^?1 in the borate (pH 9) and phosphate (pH 7) buffers, whereas those in DMF solution were found to be ～10⁹M^?1 s^?1. No such difference in k_q for the aqueous and DMF solutions was observed with the related random copolymer. The results suggest that a considerable increase in the effective concentration of the quencher around the VPh sequences in the block copolymer resulted from hydrophobic association. Fumaric acid (FA), an anionic quencher, did not quench the fluorescence of the copolymer at pH 9 and 7, presumably because of the lack of accessibility of the quencher to the copolymer due to electrostatic repulsion. However, in neat water in which only a part of the carboxyl groups of MA sequences are dissociated and therefore the charge effect is minimized, FA quenched the fluorescence, with the k_q value approximating the diffusion control limit.     

Fluorescence quenching of para-substitutedstyrenes by tetramethylethylene. Correlationanalysis of the quenching coefficient KSV and thequenching rate constant k_q by the dual-parameter equation with polar and spin-delocalization substituent constants

The fluorescence quenching coefficient (Ksv) and the quenching rate constant kq of ten para-substituted styrenes (1-Ys) have been measured and correlation-analyzed by both the dual-parameter equation (Eq. 1) with (ρxσx+ρ'σ') and the single-parameter equation (Eq. 2) with ρxσx. Ex-cellent results have been obtained for the correlation of KSV against (ρxσmb+ρ'σ'JJ) or (ρxσ+ +ρ'σ'JJ). Our results suggest that, possibly, there might be no need to use excited-state substituent constant for the fluorecence quenching process of excited states of styrenes.     

Modulation of intramolecular heterodimer-induced fluorescence quenching of tricarbocyanine dye for the development of fluorescent sensor

Various approaches have been used to modulate the fluorescence changes of sensors in the presence of target analytes, including intramolecular interaction between fluorophores or between fluorophore and other molecular species, like resonance energy transfer (RET). Here, we focus on fluorescence quenching by intramolecular heterodimer complex formation, which can be modulated over a shorter distance range than RET. We synthesized several conjugates of tricarbocyanine, which is a near-infrared fluorophore, with several quencher candidates via flexible short linker structure, and examined their fluorescence properties. Of our synthesized compounds, the dabcyl group proved to be the best quencher via heterodimer complex formation. The fluorescence of tricarbocyanine-dabcyl conjugates in aqueous media was almost completely quenched, and there was a dramatic fluorescence enhancement when heterodimer formation was blocked. These results suggested a design approach to develop fluorescence sensors for probing proximity relationships and structural transitions.     

Novel isoindigo‐based conjugated polyelectrolytes: Synthesis and fluorescence quenching behavior with water‐soluble poly(p‐phenylenevinylene)s

Two novel ID‐based water‐soluble conjugated polymers (+)‐PIDPV and (?)‐PIDPV were synthesized by Heck coupling reaction. These two polyelectrolytes are both consisted of isoindigo units and phenylenevinylene units. In the UV–vis absorption spectra, both (+)‐PIDPV and (?)‐PIDPV exhibit broad absorption bands that almost cover the whole visible region. Photophysical investigations reveal that the fluorescence of water‐soluble PPV can be efficiently quenched by oppositely charged PIDPV at a very low concentration. Cationic PPV shows an efficient quenching effect with Κ_SV = 1.01 × 10⁶ M^?1 in the presence of (?)‐PIDPV while the anionic PPV gives a lager quenching constant with Κ_SV = 1.71 × 10⁶ M^?1 in the presence of (+)‐PIDPV. Furthermore, the blend films of water‐soluble PPVs and oppositely charged PIDPV also exhibit excellent quenching effect. These properties suggest that (+)‐PIDPV and (?)‐PIDPV are promising materials in the application of ionic photoactive layer in the organic solar cells. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2223–2237     

Study of non-covalent interactions of luotonin A derivatives and the DNA minor groove as a first step in the study of their analytical potential as DNA probes

The interaction between DNA and several newly synthesized derivatives of the natural anticancer compound luotonin A has been studied. The results from our work reveal an effective and selective alkaloid/double-stranded DNA (ds-DNA) interaction. In the presence of increasing amounts of ds-DNA, a noticeable fluorescence quenching of the luotonin A derivatives under study was observed. However, this effect did not take place when single-stranded DNA (ss-DNA) was employed. The association constant alkaloids/ds-DNA was calculated by quantitation of such a quenching effect. The influence of other quenchers, namely Co²⁺ and Br⁻ on the native fluorescence of luotonin A and derivatives was also studied, and a remarkable quenching effect was observed for both ions. We have also investigated how by binding DNA the alkaloids could get protected from the external Co²⁺ and Br⁻ quenchers. The Stern–Volmer constants (K _SV) for Co²⁺ and Br⁻ quenching effect on the studied alkaloids were considerably reduced (10–50%) after incubation of the compounds in the presence of DNA with regard to the K _SV values in absence of DNA. An increase in the fluorescence anisotropy values of luotonins was also produced only in the presence of ds-DNA but not in the case of ss-DNA. To better characterize the nature of that interaction, viscosimetry assays and ethidium bromide displacement studies were conducted. With regard to DNA reference solutions, the viscosity of solutions containing DNA and luotonin A derivatives was reduced or not significantly increased. It was also observed that the studied compounds were unable to displace the intercalating agent ethidium bromide. All of these results, together with the obtained association constants values (K _ass = 2.2 × 10² – 1.3 × 10³), support that neither covalent nor intercalating interactions luotonin A derivatives/ds-DNA are produced, leading to the conclusion that these alkaloids bind ds-DNA through the minor groove. The specific changes in the fluorescence behavior of luotonin A and derivatives distinguishing between ss-DNA and ds-DNA binding, lead us to propose these compounds as attractive turn-off probes to detect DNA hybridization.     

The effects of formins on the conformation of subdomain 1 in actin filaments

In this study we investigated the effects of formins on the conformation of actin filaments by using the method of fluorescence quenching. Actin was labelled with IAEDANS at Cys³⁷⁴ and the quencher was acrylamide. The results showed that formin binding induced structural changes in the subdomain 1 of actin protomers which were reflected by greater quenching constants (K_SV). Simultaneously the fraction of the fluorophore population accessible for the quencher (α) decreased. These observations suggest that the conformational distribution characteristic for the actin protomers became broader after the binding of formins, for which the structural framework was provided by a more flexible protein matrix in the microenvironment of the label. The effects of formins depended on the formin:actin molar ratio, and also on the ionic strength of the medium. These observations are in agreement with previous results and underline the importance of the intramolecular conformational changes induced by formins in the structure of actin filaments.     

MECHANISMS OF QUENCHING OF THE FLUORESCENCE OF A BENZO[a]PYRENE TETRAOL METABOLITE MODEL COMPOUND BY 2'-DEOXYNUCLEOSIDES

Abstract— The hydrophobic interactions of bulky polycyclic aromatic hydrocarbons with nucleic acid bases and the formation of noncovalent complexes with DNA are important in the expressions of the mutagenic and carcinogenic potentials of this class of compounds. The fluorescence of the polycyclic aromatic residues can be employed as a probe of these interactions. In this work, the interactions of the (+)-trans stereoisomer of the tetraol 7,8,9,10-tetrahydroxytetrahydrobenzo[a]pyrene (BPT), a hydrolysis product of a highly mutagenic and carcinogenic diol epoxide derivative of benzo[a]pyrene, were studied with 2′-deoxynucleosides in aqueous solution by fluorescence and UV spectroscopic techniques. Ground-state complexes between BPT and the purine derivatives 2′-deoxyguanosine (dG), 2′-deoxyadenosine (dA), and 2′-deoxyinosine (dI) are formed with association constants in the range of ～40–130 M^?1 Complex formation with the pyrimidine derivatives 2′-deoxythymidine (dT), 2′-deoxycytidine (dC), and 2′-deoxyuridine (dU) is significantly weaker. Whereas dG is a strong quencher of the fluorescence of BPT by both static and dynamic mechanisms (dynamic quenching rate constant k_dyn= [2.5 ± 0.41 × 10⁹M¹ s ¹, which is close to the estimated diffusion-controlled value of ～ 5 × 10⁹M^{? 1} s^?1), both dA and dI are weak quenchers and form fluorescenceemitting complexes with BPT. The pyrimidine derivatives dC, dU, and dT are efficient dynamic fluorescence quenchers (K_dyn～ [1.5–3.0] × 10⁹M^?1 s^?1), with a small static quenching component due to complex formation evident only in the case of dT. None of the four nucleosidcs dG, dA, dC and dT are dynamic quenchers of BPT in the triplet excited state; the observed lower yields of triplets are attributed to the quenching of single excited states of BPT by 2′-deoxynucleosides without passing through the triplet manifold of BPT. Possible fluorescence quenching mechanisms involving photoinduced electron transfer are discussed. The strong quenching of the fluorescence of BPT by dG, dC and dT accounts for the low fluorescence yields of BPT-native DNA and of pyrene-DNA complexes.     

Amphiphilic copolymers of some aromatic vinyl compounds and an electrolytic monomer as potential media for photosensitized electron transfer: Fluorescence quenching by an amphiphilic electron acceptor in aqueous media

Amphiphilic polymers were prepared by the copolymerization of 2-acrylamido-2-methylpropanesulfonic acid (AMPS) and aromatic vinyl compounds such as 9-vinylphenanthrene (VPh) and 1-vinylpyrene (VPy) with the expectation that they would serve as potential media for photosensitized electron transfer reactions. AMPS strongly solubilizes the hydrophobic segments into water; i.e., poly(AMPS-co-VPh) with VPh mole fraction (f_Ph) up to about 0.60 and poly(AMPS-co-VPy) with VPy mole fraction (f_Py) up to about 0.35 were found to be soluble in water. Poly(AMPS-co-VPh) in aqueous solution, as compared with that in DMF solution, showed a broad fluorescence spectrum with significant tailing in the longer-wavelength region along with a decrease in the intensity of the structured, monomer fluorescence band. These phenomena seem to imply the presence of an excimerlike interaction of phenanthryl groups in an aqueous solution through which the fluorescence from excited VPh units may be partly self-quenched. A considerable enhancement of the fluorescence from sodium 8-anilino-1-naphthalenesulfonate (ANS) caused by hydrophobic interaction of the probe with poly(AMPS-co-VPh) in aqueous solution indicated that these copolymers assume micellar structures. The fluorescence of these copolymers in aqueous solutions was quenched by bis(2-hydroxyethyl)terephthalate (BHET), an amphiphilic quencher, far more effectively than by fumaric acid, a hydrophilic quencher. This tendency is particularly strong for the copolymers with higher content of hydrophobic units. The second-order rate constants for the quenching of poly(AMPS-co-VPh) (f_Ph = 0.58) by BHET were found to be ca. 3 × 10¹⁰ and 1.5 × 10⁹ M^?1 s^?1 in aqueous and in DMF solution, respectively. The larger value in an aqueous solution is presumably due to an increase of the effective concentration of the amphiphilic quencher around the VPh sequences of the copolymer resulting from hydrophobic interaction.     

Universal quenching of common fluorescent probes by water and alcohols

Although biological imaging is mostly performed in aqueous media, it is hardly ever considered that water acts as a classic fluorescence quencher for organic fluorophores. By investigating the fluorescence properties of 42 common organic fluorophores recommended for biological labelling, we demonstrate that H₂O reduces their fluorescence quantum yield and lifetime by up to threefold and uncover the underlying fluorescence quenching mechanism. We show that the quenching efficiency is significantly larger for red-emitting probes and follows an energy gap law. The fluorescence quenching finds its origin in high-energy vibrations of the solvent (OH groups), as methanol and other linear alcohols are also found to quench the emission, whereas it is restored in deuterated solvents. Our observations are consistent with a mechanism by which the electronic excitation of the fluorophore is resonantly transferred to overtones and combination transitions of high-frequency vibrational stretching modes of the solvent through space and not through hydrogen bonds. Insight into this solvent-assisted quenching mechanism opens the door to the rational design of brighter fluorescent probes by offering a justification for protecting organic fluorophores from the solvent via encapsulation.

Overtones and combinations of O–H vibrations in the solvent efficiently quench red-emitting fluorophores by resonant energy transfer.     

Investigation of the spectral properties of a squarylium near-infrared dye and its complexation with Fe(III) and Co(II) ions

The spectral features of the squarylium near-infrared (NIR) dye NN525 in different solutions and its complexation with several metal ions were investigated. The absorbance maximum of the dye is λ=663 nm in methanol. This value matches the output of a commercially available laser diode (650 nm), thus making use of such a source practical for excitation. The emission wavelength of the dye in methanol is λ_em=670 nm. The addition of either Fe(III) ion or Co(II) ion resulted in fluorescence quenching of the dye. The Stern–Volmer quenching constant, K_SV, was calculated from the Stern–Volmer plot to be K_SV=2.70×10⁷ M⁻¹ for Co(II) ion. The K_SV value for Fe(III) ion could not be established due to the non-linearity of the Stern–Volmer plot and the modified Stern–Volmer plot for this ion. The detection limit is 6.24×10⁻⁸ M for Fe(III) ion and 1.55×10⁻⁵ M for Co(III) ion. The molar ratio of the metal to the dye was established to be 1:1 for both metal ions. The stability constant, K_S, of the metal–dye complex was calculated to be 3.14×10⁶ M⁻¹ for the Fe–dye complex and 2.64×10⁵ M⁻¹ for the Co–dye complex.     

Superquenching of SYBRGreen dye fluorescence in complex with DNA by gold nanoparticles

The influence of gold nanoparticles (diameter of about 2.5 nm) on the complex between the SYBRGreen dye and double-stranded DNA in solutions has been investigated by fluorescence spectroscopy. Strong quenching of dye fluorescence by nanosized gold particles (??superquenching??), characterized by a high Stern-Volmer constant of K _SV ?? 3.3 × 10⁷ L/mol, has been found. The superquenching effect in the test system is explained in terms of contribution of several processes: electron transfer, formation of aggregates of gold nanoparticles involving dye dications, and enhancement of intersystem crossing by a heavy atom (gold atoms of nanoparticles).     

Fluorescence resonance energy transfer from tryptophan in human serum albumin to a bioactive indoloquinolizine system

The interaction between a bioactive molecule, 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine (AODIQ), with human serum albumin (HSA) has been studied using steady-state absorption and fluorescence techniques. A 1:1 complex formation has been established and the binding constant (K) and free energy change for the process have been reported. The AODIQ-HSA complex results in fluorescence resonance energy transfer (FRET) from the tryptophan moiety of HSA to the probe. The critical energy-transfer distance (R ₀) for FRET and the Stern-Volmer constant (K _sv) for the fluorescence quenching of the donor in the presence of the acceptor have been determined. Importantly, K _SV has been shown to be equal to the binding constant itself, implying that the fluorescence quenching arises only from the FRET process. The study suggests that the donor and the acceptor are bound to the same protein at different locations but within the quenching distance.     

Enhancement in fluorescence response by a quencher for amiloride upon binding to thymine opposite an abasic site in a DNA duplex

By using iodide (I⁻) as a quencher, we successfully improve the fluorescence response of amiloride when binding to thymine opposite an AP site in a 21-meric DNA duplex. From fluorescence measurements, as compared to the NaCl solutions, the addition of NaI as a quencher as well as salt to adjust the ionic strength effectively suppresses the background fluorescence from unbound amiloride in a solution. The Stern-Volmer analysis shows that the bound amiloride to the nucleobase at the AP site is unexposed to NaI quencher. Therefore the high signal-to-background fluorescence response of amiloride is obtained. Such enhancement in fluorescence response of amiloride by using the quencher can provide the significant improvement of the detection limit for DNA duplexes carrying T target base. The method presented in this study is simple and effective. The present method could be applicable to other detection system where microenvironment of fluorophores changes at a recognition event.     

Iron(II) complexes containing the 2,6-bis-iminopyridyl moiety. Synthesis,characterization, reactivity,and DNA binding

Two iron(II) complexes, [Fe^II(py^tBuN₃)₂](FeCl₄) (1) and [Fe^II(py^tBuMe₂N₃)Cl₂] (2), with sterically constrained py^tBuN₃ and py^tBuMe₂N₃ chelate ligands (py^tBuN₃ = 2,6-bis-(aldiimino)pyridyl; py^tBuMe₂N₃ = 2,6-bis-(ketimino)pyridyl), have been synthesized and characterized by elemental analysis, IR, UV–vis spectra, and preliminary X-ray single-crystal diffraction. The latter revealed that Fe(II) in 1 is six-coordinate by six nitrogen donors from two bisiminopyridines in a distorted octahedron. Complex 2 reacts with thiourea with a second-order rate constant k₂ = (2.50 ± 0.05) × 10^?3 M^?1 s^?1 at 296 K, and the reaction seemed to be slow. In a similar way, the interaction of 2 and DNA was studied by fluorescence and absorption spectroscopy. The results revealed that 2 caused fluorescence quenching of DNA through a dynamic quenching procedure. The binding constants K_A, K_app, and K_SV as well as the number of binding sites between 2 and DNA were determined.     

Micellar liquid chromatography of polycyclic aromatic hydrocarbons: Alkylpyridinium chloride as mobile phase modifier and selective fluorescence quencher

The dual role of alkylpyridinium chlorides, cetylpyridinium chloride (CPC) and dodecylpyridinium chloride (DDPC), as micellar mobile phase modifiers and selective fluorescence quenching agents of polycyclic aromatic hydrocarbons (PAHs), in micellar liquid chromatographic separation of PAHs is reported. The replacement of 0.037 M cetyltrimethylammonium chloride in the aqueous mobile phase with CPC/DDPC quencher greatly simplifies the observed fluorescence‐detected chromatograms, facilitating PAH identification. The resulting chromatograms are similar to those obtained from the conventional approach – pyridinium chloride quencher in an acetonitrile mobile phase. To quantify the quenching, the (F₀ /F – 1) values from the Stern‐Volmer equation are calculated from the chromatograms and compared. The feasibility of using CPC or DDPC as a dual reagent under isocratic and gradient conditions is shown.     

Electron Transfer Fluorescence Quenching of Blepharisma japonicum Photoreceptor Pigments

Abstract— The hypericin analogs blepharismin (BP), oxyblepharismin (OxyBP) and stentorin (ST), the photosensing chromophores responsible for photomotile reactions in the ciliates Blepharisma japonicum (red and blue cells) and Stentor coeruleus, represent a new class of photoreceptor pigments whose chemical structures have recently been determined. In the case of ST it has been shown that the first excited singlet state can be deactivated by donation of an electron to an appropriate acceptor molecule (e.g. a quinone molecule). This charge transfer can be considered a possible mechanism for the primary photoprocess for the photomotile responses in S. coeruleus. To determine whether an electron transfer process also occurs in the deactivation of excited blepharismin, we studied the fluorescence quenching of OxyBP in dimethyl-sulfoxide (DMSO) and in ethanol using electron acceptors with different reduction potentials. Under our experimental conditions ground state and excited state complexes (like fluorescent exciplexes) are not formed between the fluorophore and the quenchers. In DMSO the bimolecular quenching constant values (k_q) calculated on the basis of the best fitting procedures clearly show that the quenching efficiency decreases with the quencher negative reduction potential, E⁰. The k_q (M^-1 s^-1) and E⁰ (V) values are, respectively, 7.8 times 10⁹ and -0.134 for 1,4-benzoquinone, 8.9 times 10⁹ and -0.309 for 1,4-naphthoquinone, 2.4 times 10⁹ and -0.8 for nitrobenzene, 0.009 times 10⁹ and -1.022 for azobenzene and 0 and -1.448 for benzophenone. These findings point to the conclusion that upon formation of the encounter complex between OxyBP and the quencher, an electron is released from excited OxyBP to the quencher, similar to what happens in ST. It is suggested that in the pigment granules such a light-induced charge transfer from excited blepharismin to a suitable electron acceptor triggers sensory transduction processes in B. japonicum.     

Synthesis and Characterization of Reversible Chemosensory Polymers: Modulation of Sensitivity through the Attachment of Novel Imidazole Pendants

Three novel electron donor–acceptor conjugated polymers ( P1 – P3 ) bearing various imidazole pendants have been synthesized. Their excellent photophysical and electrochemical properties make them suitable transduction materials for chemosensing applications. Indeed, polymers P1 – P3 have been found to show remarkable sensing capabilities towards H⁺ and Fe²⁺ in semi‐aqueous solutions. Upon titration with H⁺, polymers P1 and P2 showed hypsochromic shifts of their absorptions and photoluminescence (PL) maxima with enhanced fluorescence intensities. However, P3 showed diminished absorption and fluorescence intensities under similar conditions due to static quenching. The anomalous behavior of P3 compared with P1 and P2 has been clarified in terms of electronic distributions through computational analysis. Furthermore, P3 (K_SV=1.03×10⁷) showed a superior sensing ability towards Fe²⁺ compared with P1 (K_SV=2.01×10⁶) and P2 (K_SV=4.12×10⁶) due to its improved molecular wire effect. Correspondingly, the fluorescence lifetime of P3 was greatly decreased (almost 11‐fold) compared to those of polymers P1 (4.6‐fold) and P2 (6.2‐fold) in the presence of Fe²⁺. By means of a fluorescence on‐off‐on approach, chemosensing reversibilities in protonation–deprotonation and metallation–demetallation have been achieved by employing triethylamine (TEA) and the disodium salt of ethylenediaminetetraacetic acid (Na₂‐EDTA)/phenanthroline, respectively, as suitable counter ligands. ¹H NMR titrations have revealed the unique behavior of P3 compared with P1 and P2 . To the best of our knowledge, there have been no previous reports of Fe²⁺ sensors based on single imidazole receptors conjugated to a main‐chain polymer showing such a diverse sensitivity pattern depending on their attached substituents.     

A naked-eye,selective and sensitive chemosensor for fluoride ion

Effect of the addition of six different anions on the absorption and fluorescence spectra of acridine yellow G (AYG) was examined. Only the F⁻ anion could induce a visible color change observable with naked eye and a strong fluorescence quenching with K _SV of 8.3 × 10⁴ mol⁻¹ L in CH₃CN solutions. Calculated results of the interaction between the F⁻ anion and acridine yellow G using the B3LYP/6-31G(d) program showed that the intermolecular charge transfer through the formation of an H-bond between AYG and F⁻ is an essential sensor mechanism.