Reversible controlled assembly of thermosensitive polymer-coated gold nanoparticles

Aggregation of thermosensitive polymer-coated gold nanoparticles was performed in aqueous solution in the presence of a triblock copolymer poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (Pluronic P123, PEO(20)-PPO(68)-PEO(20)). The gold nanoparticles, AuNPs, which are covered by thermosensitive statistical copolymers poly(EO(x)-st-PO(y)), aggregate when the temperature is higher than the phase transition temperature of the polymer, leading to a macroscopic precipitation. The presence of Pluronic chains in solution prevents the uncontrolled aggregation of the AuNPs at higher temperature than both the aggregation temperature of the AuNPs (T(agg)) and the critical micellization temperature (cmt) of the Pluronic. The size, the colloidal stability, and the optical properties of the AuNPs aggregates are modulated as a function of the P123-to-AuNP ratio, which constitutes the critical parameter of the system. Moreover, the AuNP aggregation is totally reversible upon decreasing the temperature below T(agg). Our approach constitutes an easy way to the formation of well-controlled nanoparticle aggregates with well-defined sizes. The resulting aggregates have been characterized by UV-vis spectroscopy, dynamic light scattering, and electron microscopy.     

Efficient synthesis of single gold nanoparticle hybrid amphiphilic triblock copolymers and their controlled self-assembly

We report on a robust approach to the size-selective and template-free synthesis of asymmetrically functionalized ultrasmall (<4 nm) gold nanoparticles (AuNPs) stably anchored with a single amphiphilic triblock copolymer chain per NP. Directed NP self-assembly in aqueous solution can be facilely accomplished to afford organic/inorganic hybrid micelles, vesicles, rods, and large compound micelles by taking advantage of the rich microphase separation behavior of the as-synthesized AuNP hybrid amphiphilic triblock copolymers, PEO-AuNP-PS, which act as the polymer-metal-polymer analogue of conventional amphiphilic triblock copolymers. Factors affecting the size-selective fabrication and self-assembly characteristics and the time-dependent morphological evolution of NP assemblies were thoroughly explored.     

Preparation of Cross‐Linked Micelles from Glycidyl Methacrylate Based Block Copolymers and Their Usages as Nanoreactors in the Preparation of Gold Nanoparticles

This study reports the synthesis of poly(ethylene glycol)methyl ether‐block‐poly(glycidyl methacrylate) (MPEG‐b‐PGMA) diblock, and poly(ethylene glycol)methyl ether‐block‐poly(glycidyl methacrylate)‐block‐poly(methyl methacrylate) (MPEG‐b‐PGMA‐b‐PMMA) triblock copolymers via atom transfer radical polymerization and their self‐assembly behaviors in aqueous media by using acetone as cosolvent. These block copolymers formed near monodisperse core–shell micelles having cross‐linkable cores. Two types of cross‐linked micelles, namely spherical MPEG‐b‐PGMA core cross‐linked (CCL) micelles and MPEG‐b‐PGMA‐b‐PMMA interlayer cross‐linked (ILCL) micelles, were also successfully prepared from these block copolymers by using various bifunctional cross‐linkers such as hexamethylenediamine (HMDA), ethylenediamine (EDA), and 2‐aminoethanethiol (AET). Cross‐linking was successfully carried out via ring‐opening reactions of epoxy residues of hydrophobic‐cores with primary amine or thiol groups of bifunctional cross‐linkers. Finally, these cross‐linked micelles were successfully used as nanoreactors in the synthesis of gold nanoparticles (AuNPs) in aqueous media. Both CCL and ILCL micelles were found to be good stabilizers for AuNPs in aqueous media. Both CCL‐ and ILCL‐stabilized AuNP dispersions were stable for a long time without any size changes and flocculation at room temperature. These cross‐linked stabilized AuNPs exhibited good catalytic activities in the reduction of p‐nitrophenol. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 514–526.     

Precisely installing gold nanoparticles at the core/shell interface of micellar assemblies of triblock copolymers

Two reduction-cleavable ABA triblock copolymers possessing two disulfide linkages, PMMA-ss-PMEO₃MA-ss-PMMA and PDEA-ss-PEO-ss-PDEA were synthesized via facile substitution reactions from homopolymer precursors, where PMMA, PMEO₃MA, PDEA, and PEO represent poly(methyl methacrylate), poly(tri(ethylene glycol) monomethyl ether methacrylate, poly(2-(diethylamino)ethyl methacrylate), and poly(ethylene oxide), respectively. Spherical micelles were obtained through supramolecular self-assembly of these two triblock copolymers in aqueous solutions. The resultant micelles with abundant disulfide bonds could serve as soft templates and precisely accommodate gold nanoparticles in the core/shell interface as a result of the formation of Au-S bonds.     

Facile One‐Pot Synthesis of Functional Gold Nanoparticle–Polymer Hybrids Using Ionic Block Copolymers as a Nanoreactor

A highly versatile approach to fabricate functional gold nanoparticle (AuNP)‐polymer hybrids is demonstrated by employing sulfonated block copolymers. The 3–5 nm sized ionic domain of the sulfonated poly(styrene‐block‐methylbutylene) (S_nMB_m) copolymers can be utilized as a nanoreactor where the Au ions can be selectively sequestered and reduced to AuNPs using a simple photochemical method. The size of the AuNPs can be adjusted in fine‐steps from 2.0 ± 0.3 to 3.9 ± 0.5 nm by changing the sulfonation levels of the S_nMB_m copolymers. Remarkably, significantly improved methanol oxidation properties are achieved with the hybrid materials owing to the ion conducting–SO₃H groups and the interconnected network of AuNPs confined within the self‐assembled microstructures, which provides electronic conductivity.     

Formation of gold@polymer core-shell particles and gold particle clusters on a template of thermoresponsive and pH-responsive coordination triblock copolymer

Template synthesis of various morphological gold colloidal nanoparticles using a thermoresponsive and pH-responsive coordination triblock copolymer of poly(ethylene glycol)-b-poly(4-vinylpyridine)-b-poly(N-isopropylacrylamide) is studied. The template morphology of the thermoresponsive and pH-responsive coordination triblock copolymer, which can be tuned by simply changing the pH or temperature of the triblock copolymer aqueous solution, ranges from single chains to core-corona micelles and further to micellar clusters. Various morphological gold colloidal nanoparticles such as discrete gold nanoparticles, gold@polymer core-shell nanoparticles, and gold nanoparticle clusters are synthesized on the corresponding template of the triblock copolymer by first coordination with gold ions and then reduction by NaBH4. All three resultant gold colloidal nanoparticles are stable in aqueous solution, and their sizes are 2, 10, and 7 nm, respectively. The gold@polymer core-shell nanoparticles are thermoresponsive. The gold nanoparticle cluster has a novel structure, and each one holds about 40 single gold nanoparticles.     

Precisely Assembled Cyclic Gold Nanoparticle Frames by 2D Polymer Single‐Crystal Templating

In recent decades, extensive studies have been devoted to assembling nanoparticles (NPs) into various ordered structures to achieve novel optical properties. However, it still remains a challenging task to assemble NPs into cyclic one‐dimensional (1D) shapes, such as rings and frames. Herein, we report a directed assembly method to precisely assemble NPs into well‐defined, free‐standing frames using polymer single crystals (PSCs) as the template. Preformed poly(ethylene oxide) (PEO) single crystals were used as the template to direct the crystallization of block copolymer (BCP) poly(ethylene oxide)‐b‐poly(4‐vinylpyridine) (PEO‐b‐P4VP), which directs the gold NPs (AuNPs) to form AuNP frames. By controlling the PSC growth, we were able to, for the first time, precisely tune both the size and width of the AuNP frame. These novel AuNP frames topologically resemble NP nanorings and cyclic polymer chains, and show unique surface plasmon resonance (SPR) behaviors.     

DNA aptamer folding on gold nanoparticles: from colloid chemistry to biosensors

We have investigated the effect of the folding of DNA aptamers on the colloidal stability of gold nanoparticles (AuNPs) to which an aptamer is tethered. On the basis of the studies of two different aptamers (adenosine aptamer and K+ aptamer), we discovered a unique colloidal stabilization effect associated with aptamer folding: AuNPs to which folded aptamer structures are attached are more stable toward salt-induced aggregation than those tethered to unfolded aptamers. This colloidal stabilization effect is more significant when a DNA spacer was incorporated between AuNP and the aptamer or when lower aptamer surface graft densities were used. The conformation that aptamers adopt on the surface appears to be a key factor that determines the relative stability of different AuNPs. Dynamic light scattering experiments revealed that the sizes of AuNPs modified with folded aptamers were larger than those of AuNPs modified with unfolded (but largely collapsed) aptamers in salt solution. From both the electrostatic and steric stabilization points of view, the folded aptamers that are more extended from the surface have a higher stabilization effect on AuNP than the unfolded aptamers. On the basis of this unique phenomenon, colorimetric biosensors have been developed for the detection of adenosine, K+, adenosine deaminase, and its inhibitors. Moreover, distinct AuNP aggregation and redispersion stages can be readily operated by controlling aptamer folding and unfolding states with the addition of adenosine and adenosine deaminase.     

Colloidal stability evolution and completely reversible aggregation of gold nanoparticles functionalized with rationally designed free radical initiators

A series of molecular adsorbates having various chain lengths of terminal poly(ethylene glycol methyl ether) (PEG) moieties, thiol head groups, and intervening free radical initiator moieties was used to functionalize the surface of gold nanoparticles (AuNPs). The bulky PEG groups stabilized the functionalized AuNPs by providing steric hindrance against AuNP aggregation, such aggregation being a major problem in the modification and manipulation of metal nanoparticles. UV–vis spectroscopy was used to evaluate the stability of the adsorbate-functionalized AuNPs as a function of AuNP size (～15, 40, and 90 nm in diameter) and PEG chain length (Mn 350, 750, and 2,000). The longer PEG chains (Mn 750 and 2,000) afforded stability to AuNPs with smaller gold cores (～15 and 40 nm in diameter) for up to several days without any marked aggregation. In contrast, the adsorbate-functionalized AuNPs with the largest gold cores (～90 nm) were noticeably less stable than those with the smaller gold cores. Importantly, the adsorbate-functionalized AuNPs could be isolated in solvent-free “dried” form and readily dispersed in aqueous buffer solution (both acidic and basic) and various organic solvents (protic and aprotic). This isolation–redispersion (i.e., aggregation/deaggregation) process was completely reversible. The chemisorption of the PEG-terminated initiator on the surface of the AuNPs was verified by Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS). As a whole, the strategy reported here affords colloidally stable, free radical initiator-functionalized AuNPs and offers a promising general method for encapsulating metal nanoparticles within polymer shells.

Thermoresponsive assembly of charged gold nanoparticles and their reversible tuning of plasmon coupling

Charged colloidal gold nanoparticles (AuNPs) can be assembled and disassembled in an aqueous solution in response to temperature change and display reversible thermoresponsive tuning of plasmon coupling. The reversible tuning was made possible by manipulating the electrostatic interaction through the temperature-dependent zeta potential of the charged AuNPs (see the extinction spectra of a typical AuNP dispersion).     

Dissipative particle dynamics simulation of gold nanoparticles stabilization by PEO–PPO–PEO block copolymer micelles

Dissipative particle dynamics (DPD) was used to simulate the formation and stabilization of gold nanoparticles in poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PEO) block copolymer micelles. Primary gold clusters that were experimentally observed in the early stage of gold nanoparticle formation were modeled as gold bead in DPD simulation. It showed that gold beads were wrapped by the block copolymer and aggregated into spherical particles inside the micelles and forming stable Pluronic–gold colloids with two-layer structures. Increasing Pluronic concentration, molecular weight, and PPO block length led to the formation of more uniform and more stable gold nanoparticles. Density profiles of water beads suggested that the micelles, especially the hydrophobicity of the micellar cores, played an important role in stabilizing gold nanoparticles. Dynamic process indicated that the formation of gold nanoparticles was controlled by the competition between aggregation of primary gold clusters and the stabilization by micelles of block copolymers.. The DPD simulation results of gold–copolymer–water system agree well with previous experiments, while more structure information on microscopic level could be provided.     

Metalated diblock and triblock poly(ethylene oxide)-block-poly(4-vinylpyridine) copolymers: understanding of micelle and bulk structure

The paper provides new insights into the structure of Pt-containing diblock and triblock copolymers based on poly(ethylene oxide) (PEO) and poly(4-vinylpyridine) (P4VP), using a combination of atomic force microscopy (AFM), X-ray diffraction (XRD), transmission electron microscopy (TEM), and anomalous small-angle X-ray scattering (ASAXS). Parallel studies using methods contributing supplemental structural information allowed us to comprehensively characterize sophisticated polymer systems during metalation and to exclude possible ambiguity of the data interpretation of each of the methods. AFM and TEM make available the determination of sizes of the micelles and of the Pt-containing micelle cores, respectively, while a combination of XRD, TEM, and ASAXS reveals Pt-nanoparticle size distributions and locations along with the structural information about the polymer matrix. In addition, for the first time, ASAXS revealed the organization of Pt-nanoparticle-filled diblock and triblock copolymers in the bulk. The nanoparticle characteristics are mainly determined by the type of block copolymer system in which they are found: larger particles (2.0-3.0 nm) are formed in triblock copolymer micelles, while smaller ones (1.5-2.5 nm) are found in diblock copolymer micelles. This can be explained by facilitated intermicellar exchange in triblock copolymer systems. For both systems, Pt nanoparticles have narrow particle size distributions as a result of a strong interaction between the nanoparticle surface and the P4VP units inside the micelle cores. The pH of the medium mainly influences the particle location rather than the particle size. A structural model of Pt-nanoparticle clustering in the diblock PEO-b-P4VP and triblock P4VP-b-PEO-b-P4VP copolymers in the bulk was constructed ab initio from the ASAXS data. This model reveals that nearly spherical micellar cores of about 10 nm in diameter (filled with Pt nanoparticles) aggregate forming slightly oblate hollow bodies with an outer diameter of about 40 nm.     

Polymer Cages as Universal Tools for the Precise Bottom‐Up Synthesis of Metal Nanoparticles

A template synthesis allows the preparation of monodisperse nanoparticles with high reproducibility and independent from self‐assembly requirements. Tailor‐made polymer cages were used for the preparation of nanoparticles, which were made of cross‐linked macromolecules with pendant thiol groups. Gold nanoparticles (AuNPs) were prepared in the polymer cages in situ, by using different amounts of cages versus gold. The polymer cages exhibited a certain capacity, below which the AuNPs could be grown with excellent control over the size and shape. Control experiments with a linear diblock copolymer showed a continuous increase in the AuNP size as the gold feed increased. This completely different behavior regarding the AuNP size evolution was attributed to the flexibility of the polymer chain depending on cross‐linking. Moreover, the polymer cages were suitable for the encapsulation of AgNPs, PdNPs, and PtNPs by the in situ method.     

Breakdown kinetics of aggregates from poly(ethylene glycol‐bl‐propylene sulfide) di‐ and triblock copolymers induced by a non‐ionic surfactant

We explored the effects of addition of the nonionic surfactant Triton X‐100 on the stability of aggregates of poly(ethylene glycol‐bl‐propylene sulfide) di‐ and triblock copolymers. Fluorescence spectra of pyrene, used as a probe molecule, elucidated the various stages of transformation from pure copolymeric micelles to surfactant‐rich micelles. Turbidity measurements yielded insight into the mechanism of the interaction, the hydrophobicity of the copolymer driving the process. Triton X‐100 tends to strongly interact with highly hydrophobic copolymers by inserting into the core of the micellar aggregates. On the other hand, Triton X‐100 tends to interact with the corona of micelles formed by less hydrophobic copolymers which, for this reason, are more stable upon addition of this destabilizing agent. Kinetic data give evidence that only monomers, not micelles of surfactant, interact with the copolymer micelles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2477–2487, 2008     

High-density assembly of gold nanoparticles with zwitterionic carbon nanotubes and their electrocatalytic activity in oxygen reduction reaction

Gold nanoparticles (AuNPs) were assembled with high density onto multi-walled carbon nanotubes, which were functionalized with zwitterionic poly(imidazoliumsulfonate). The AuNP/zwitterionic CNT hybrids exhibited decent electrocatalytic activity in oxygen reduction reaction as the AuNP-based catalysts.     

Fabrication and characterization of gold/acrylic polymer nanocomposites

We report the method of incorporation of preformed gold nanoparticles (AuNPs) into the acrylic polymer (AP) matrices and optical, TEM characterization of AuNP/AP bulk and film composite. It was shown that incorporation of dodecanethiol-covered AuNP can be enhanced in the presence of SiO₂ nanoparticles, enabling at the same time a wider range of tailoring of composite properties for optical processing.     

Light-activated covalent formation of gold nanoparticle-graphene and gold nanoparticle-glass composites

Monolayer protected gold nanoparticles (AuNPs) modified with a 3-aryl-3-(trifluoromethyl)diazirine functionality at its terminus (Diaz-AuNPs, 3.9 nm) were prepared and irradiated in the presence of two very different substrates, reduced graphene and glass. Upon irradiation, the terminal diazirine group loses nitrogen to generate a reactive carbene at the interface of the AuNPs that can then undergo addition or insertion reactions with functional groups on the graphene or glass surfaces, leading to the formation of graphene-AuNP and glass-AuNP hybrids, respectively. The AuNP hybrids were characterized using TEM, XRD, XPS, AFM, and UV-vis spectroscopy. Control experiments done in the absence of irradiation demonstrate that carbene activation is required for incorporation of significant AuNP onto the materials. The AuNP hybrids are robust and stable to excessive washing and centrifugation supporting the covalent nature of the interaction between the AuNP and the graphene or silicate glass substrates. Because the formation of the composite is light activated, it lends itself to photopatterning; this application is demonstrated for making the glass-AuNP composites.     

Cisplatin-tethered gold nanoparticles that exhibit enhanced reproducibility, drug loading, and stability: a step closer to pharmaceutical approval?

Gold nanoparticles (AuNPs) can be used as delivery vehicles for platinum anticancer drugs, improving their targeting and uptake into cells. Here, we examine the appropriateness of different-sized AuNPs as components of platinum-based drug-delivery systems, investigating their controlled synthesis, reproducibility, consistency of drug loading, and stability. The active component of cisplatin was tethered to 25, 55, and 90 nm AuNPs, with the nanoparticles being almost spherical in nature and demonstrating good batch-to-batch reproducibility (24.37 ± 0.62, 55.2 ± 1.75, and 89.1 ± 2.32 nm). The size distribution of 25 nm AuNPs has been significantly improved, compared with a previous method that produces polydispersed nanoparticles. Attachment of platinum to the AuNP surface through a poly(ethylene glycol) (PEG) linker exhibits an increase in the drug loading with increasing particle size: 25 nm (815 ± 106 drug molecules per AuNP), 55 nm (14216 ± 880), and 90 nm (54487 ± 15996). The stability of the naked, PEGylated, and platinum-conjugated nanoparticles has been examined over time under various conditions. When stored at 4 °C, there is minimal variation in the diameter for all three AuNP sizes; variation after 28 days for the 25 nm AuNPs was 2.4%; 55 nm, 3.3%; and 90 nm, 3.6%. The 25 nm AuNPs also demonstrate minimal changes in UV-visible absorbance over the same time period.     

Hierarchical mesostructures of biodegradable triblock copolymers via evaporation-induced self-assembly directed by alkali metal ions

Hierarchical mesostructures of poly(ε-caprolactone)-b-poly(ethylene oxide)-b-poly(ε-caprolactone) (PCL-PEO-PCL) triblock copolymers have been grown from evaporation-induced self-assembly directed by alkali metal ions. The self-assembly process began with a dilute homogeneous solution of the triblock copolymers in a mixture of tetrahydrofuran (THF) and water. THF preferentially evaporated under reduced pressure and induced the formation of amphiphilic polymer micelles. The spherical polymer micelles formed both in deionized water and NaOH aqueous solution. However, different mesostructures were discovered during the film depositing process for scanning electron microscopy observation. The polymer micelles were observed for the deposition sample in deionized water while sisal-like hierarchical mesostructures resulted from the film deposition of polymer micelles in NaOH aqueous solution. The sisal-like mesostructures and their formation process were observed through scanning electron microscopy, transmission electron microscopy, fluorescent microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. Detailed study revealed that during evaporation-induced self-assembly of PCL-PEO-PCL amphiphilic triblock copolymer directed by alkali metal ions, the sodium ions and polymer micelles increasingly concentrated in NaOH aqueous solution and the solvent quality for the diblock progressively decreased, which resulted in the stronger coordination between alkali metal ions and PEO ligands in the block copolymer and PEO segment crystallization.     

Thermoreversible gelation of poly(ethylene oxide) biodegradable polyester block copolymers

The gel to sol transition of aqueous solutions of di‐ and triblock copolymers consisting of poly(ethylene oxide) and biodegradable polyesters was studied as a function of temperature. The molecular weight and the chemical composition of the biodegradable blocks, (poly(l ‐lactic acid), poly(dl ‐lactic acid), poly(dl ‐lactic acid‐co‐caprolactone), and poly(dl ‐lactic acid‐co‐glycolic acid)) were varied to investigate the effects of chain packing and relative hydrophobicity on the gel to sol transition. The block copolymers studied formed micelles at lower concentrations in water, while the concentrated solutions experienced a gel to sol transition as the temperature increased. Further increase in temperature resulted in the precipitation of polymers. With increasing molecular weight and chain packing tendency of hydrophobic biodegradable block, the gel to sol transition occurred at lower concentrations and the transition temperature ranged from 0°C to over 90°C in a relatively narrow concentration range. The results obtained in this study confirm the relationship between gelation properties and polymer structure, as well as provide more information for these polymers in drug delivery applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 751–760, 1999