自辐射场下PuO分子光谱研究

在相对论有效原子实势近似下, 以Pu为SDD基组、O为6-311+G^*基组, 采用优选的密度泛函 B3LYP方法, 研究了用电场摸拟钚本身产生自辐射场(-0.005—0.005 a.u.) 作用下氧化钚(PuO)基态分子的最高占据轨道(HOMO)能级E_H、最低空轨道(LUMO)能级E_L、能隙E_g和费米能级E_F. 结果表明: 在所加的电场范围内, E_H随着电场的增加均逐渐减少, E_F随着电场的增加均逐渐增大, E_g始终处于增大的趋势, 费米能级E_F上升, 占据轨道的电子难以被激发至空轨道而形成激发态, PuO分子在自辐射场中更趋于稳定, 可以阻止O₂, H₂等扩散到表面内层而腐蚀钚表面, 有利于了钚在自辐射场中抗腐蚀.     

Al2O3Hx(x=1—3)分子团簇的结构与光谱研究

用密度泛函理论(DFT)的B3lyp方法在6-311++g(d,p)水平上对Al₂O₃H_x(x=1—3)分子的几何构型, 电子结构, 振动频率等性质进行了系统研究. 并给出了它们可能基态结构的总能量(E_T), 零点能(E_z), 摩尔热容(C_v), 标准熵(S), 原子化能(ΔE_m), 垂直电离能(IP)及垂直电子亲和能(E_A). Al₂O₃H和Al₂O₃H₂分子可能的基态的几何构型都为平面结构. Al₂O₃H₃的两个可能为基态的几何构型都是在立体Al₂O₃(D_3h)的几何结构基础上加三个氢原子构成. 这三个分子的能量最低结构为Al₂O₃H(²A′)C_s, Al₂O₃H₂(¹A′) C_s, Al₂O₃H₃ (²A) C₁.     

虚晶近似法研究AlN-Al2O3固溶体系的力学性能和电子结构

基于密度泛函理论的第一性原理平面波赝势方法, 运用虚晶近似方法计算了AlN-Al₂O₃固溶区内尖晶石相氮氧化铝(Al₂₄O₂₄N₈, Al₂₃O₂₇N₅和Al₂₂O₃₀N₂)和α-Al₂O₃, AlN的力学性能和电子结构. 结果证明虚晶近似法应用到氮氧化铝结构计算中是可行的. 力学常数计算结果和弹性模量B, 剪切模量G, 杨氏模量E反映的材料硬度变化趋势与实验基本一致;Al₂O₃-AlN固 溶区内五种结构均为脆性性质且Al₂₃O₂₇N₅脆性最低, 硬度高、脆性低的特性反映了Al₂₃O₂₇N₅优异的抗弯强度性能. 五种结构满足力学结构上的稳定性, 立方尖晶石相氮氧化铝表现为弹性各向异性. 能带和态密度的计算分析表明这五种结构均为直接宽带隙结构. 在费米能级附近, 氮氧化铝结构中阴离子的2p态和阳离子的3s, 3p态发生了轨道杂化. 理论结果与实验数据基本符合, 为进一步研究提供了一定的理论方法和依据.     

稀土元素掺杂对VH2解氢性能的影响

采用密度泛函理论(DFT)的第一性原理的平面波超软赝势方法,研究了La, Ce和Pr掺杂对VH₂的 电子结构和解氢性能的影响.计算结果显示La, Ce和Pr掺杂VH₂后晶体模型的费米能级E_f处 电子浓度N (E_f)的增加,表明体系结构稳定性减弱,解氢能力增强; 电子密度计算也显示V-H之间相互作用减弱,解氢能力增强;同时Mulliken布居数计算结果还显示掺杂以后 解氢能力增强与V-d轨道Mulliken布居数减少, V-s轨道Mulliken布居数增加有关.     

Extended triplet set C343 of DNA sequences and its application to the p53 gene

Recently, much research has indicated that more and more cancers pose a threat to human life. Cancers are caused by oncogenes. Many human oncogenes have been found and most of them are located on chromosomes. The discovery of the oncogene plays a significant role in the treatment of cancer. The p53 tumor suppressor gene has received much attention because it frequently mutates or deletes in tumor cells of most people. Thus, the study of oncogenes is significant. In order to establish the Galois field (GF(7)), the indefinite gene is introduced as D and oncogene is introduced as O, and P. Taking the polynomial coefficients a₀, a₁, a₂ ∈ GF(7) and the bijective function f:GF(7) → {D,A,C,O,G,T,P}, where f(0) = D, f(1) = A, f(2) = C, f(3) = O, f(4) = G, f(5) = T, and f(6) = P, the bijective φ may be written as φ(a₀ + a₁x + a₂x²). Based on the algebraic structure, we can not only analyse the DNA sequence of oncogenes, but also predict possible new cancers.     

K-matrix analysis of the (IJ<Superscript>PC</Superscript> = 00<Superscript>+ +</Superscript>)-wave in the mass region below 1900 MeV

We present the results of the current analysis of the partial wave IJ ^PC = 00^{+ +} based on the available data for meson spectra ( ππ, KˉK,ηη,η,ππππ). In the framework of the K-matrix approach, the analytical amplitude has been reconstructed in the mass region 280 MeV < < 1900 MeV. The following scalar-isoscalar states are seen: comparatively narrow resonances f ₀(980), f ₀(1300), f ₀(1500), f ₀(1750) and the broad state f₀(1200-1600). The positions of the amplitude poles (masses and total widths of the resonances) are determined as well as pole residues (partial widths to meson channels ππ, KˉK,ηη,η,ππππ). The fitted amplitude gives us the positions of the K-matrix poles (bare states) and the values of bare-state couplings to meson channels thus allowing the quark-antiquark nonet classification of bare states. On the basis of the obtained partial widths to the channels ππ, KˉK,ηη,η, we estimate the quark/gluonium content of f ₀(980), f ₀(1300), f ₀(1500), f ₀(1750), f₀(1200-1600). For f ₀(980), f ₀(1300), f ₀(1500) and f ₀(1750), their partial widths testify the qˉq origin of these mesons though being unable to provide precise evaluation of the possible admixture of the gluonium component in these resonances. The ratios of the decay coupling constants for the f₀(1200-1600) support the idea about the gluonium nature of this broad state. Received: 14 May 2002 / Accepted: 20 August 2002 / Published online: 11 February 2003 RID="a" ID="a"e-mail: anisovic@thd.pnpi.spb.ru Communicated by A. Sch?fer     

纤锌矿结构Zn1-xMgxO电子结构及吸收光谱的第一性原理研究

采用第一性原理计算方法，计算了纤锌矿结构Zn_1-xMg_xO(x=0，00625，0125，025)的电子结构及吸收光谱. 计算结果表明，Mg的掺入使ZnO的电子结构发生了较大的改变，与Mg邻近的O原子得到电子的数目明显增大，进而O原子返回部分电子给邻近Zn原子. Zn-O间相互作用减弱，禁带宽度变大，这也从同一合金中Zn4s上移的程度得到证实. 其吸收光谱也随着Mg的掺入出现蓝移现象，其吸收边对应波长分别为379，     

类氖等电子系列离子基态的双电子复合速率系数研究

使用全相对论组态相互作用方法, 能级-能级细致计算了0.1 E_I ≤ kT_e≤ 10 E_I (E_I是类钠离子基态的第一电离能) 温度范围内类氖离子基态双电子复合(DR)速率系数, 双激发自电离能级考虑了(2s2p)⁷3ln'l', (2s2p)⁷4l4l' 以及(2s2p)⁷4l5l'组态. 对于(2s2p)⁷3ln'l'双激发自电离组态, 轨道角量子数l' >8 的(2s2p)⁷3ln'l'双激发自电离态对双电子复合速率系数的贡献可以忽略不计; (2s2p)⁷3ln'l'双激发自电离组态的高里德堡态对双电子复合速率系数的贡献满足 n'^-3组态-组态外推法, 并且核电荷数越大, 趋于n'^-3标度的n'值越小; 对细致能级计算得到的类氖离子基态的总DR速率系数进行了拟合, 得到类氖离子基态的总DR速率系数随核电荷数 Z和电子温度变化的经验公式, 该拟合公式与细致计算结果的偏差在2%以内, 能较准确的计算任意核电荷数Z的类氖离子在0.1E_I ≤ kT_e ≤ 10E_I电子温度范围的DR速率系数. Burgess-Merts(BM)近似公式不适用于估算低温(kT_e<0.3 E_I)类氖离子的DR速率系数, 在高温(kT_e>2E_I)时, 类氖离子的DR速率系数可以用BM近似公式表示.     

杂质对镁合金耐蚀性影响的电子理论研究

利用大角重位点阵模型建立了Mg合金［0001］对称倾斜晶界模型，应用实空间的连分数方法计算了杂质在晶界的偏聚能，杂质原子间相互作用能和不同体系的费米能级，讨论了杂质在晶界的偏聚行为，杂质间的相互作用与有序化的关系及杂质对镁合金腐蚀性能影响的物理本质. 计算结果表明，杂质原子偏聚于晶界，且主要偏聚于晶界的压缩区；杂质原子间相互排斥，因此在晶界区形成有序相；费米能级与材料的腐蚀电位存在这样的关系：材料的费米能级越高，其腐蚀电位就越低，容易被腐蚀，相反费米能级低，其腐蚀电位就高，不容易腐蚀. 体系中成分不同区域的费米能级差导致电子从费米能级高的区域流向费米能级低的区域，正是费米能级差构成了镁合金电化学腐蚀的电动势. 关键词： 电子理论 晶界偏聚 镁合金 腐蚀机理     

混沌半导体激光器的弛豫振荡频率对随机序列速率的影响

利用光反馈半导体激光器产生的混沌激光作为随机数发生器的物理熵源, 分析了混沌信号自相关系数与随机序列游程数之间的联系, 在此基础上研究了激光器的弛豫振荡频率f_r与随机序列速率f_n在不同比值时, 序列游程数的变化情况. 研究发现, 当f_r/f_n=(2k+1)/4时, 随机序列的游程数容易满足NIST SP800-22随机数测试标准的要求. 当k=1时, 得到随机序列最大速率为f_n=4f_r/3.     

稀土对镁合金应力腐蚀影响电子理论研究

建立了镁合金纯净晶界及其析出Mg₁₇Al₁₂相的晶界原子集团，应用实空间的递归方法计算了铝、稀土元素在晶界的偏聚能，晶界处铝、稀土原子间相互作用能和不同体系的费米能级.讨论了铝、稀土在晶界的偏聚行为，铝、稀土原子间的相互作用与有序化的关系及稀土对镁合金晶间应力腐蚀影响的物理本质.研究发现：铝、稀土原子偏聚于晶界；铝原子间相互排斥，在晶界区形成有序相Mg₁₇Al₁₂，稀土原子间互相吸引，形成原子团簇；稀土原子团吸引铝原子，使铝原子渗入稀土团簇中，形成稀土化合物.因此，稀土具有抑制铝在晶界形成导致应力腐蚀的阴极相Mg₁₇Al₁₂的作用，提高镁合金的晶间应力腐蚀抗力. 关键词： 电子理论 镁合金 应力腐蚀 稀土     

Broad-beam laser cladding of Al-Cu alloy coating on AZ91HP magnesium alloy

The resistance to wear and corrosion of AZ91HP Mg alloy was improved by laser cladding Al-Cu alloy. It was found that the clad layer was characterized by AlCu₄ and Mg₁₇Al₁₂ grains embedded in a AlMg matrix. The bonding zone exhibited a white-light planar crystal band with thickness of 10-13 μm. The heat-affected zone formed a eutectic structure due to the Mg diffusion. The microhardness and wear resistance of the coating were improved due to the formation of the hard phases AlCu₄ and Mg₁₇Al₁₂. Owing to the formation of dense Al₂O₃ oxide film, the coating exhibited better corrosion resistance in 3.5 wt.% NaCl solution.     

Effects of Ca/Al ratio and extrusion process on Mg–Al–Ca alloys to produce a high toughness in-situ composite

The microstructures and tensile properties of Mg–Al₂Ca–Mg₂Ca in situ composites (Mg–17Al–8Ca, Mg–14Al–11Ca and Mg–12.5Al–12.5Ca) with different Ca/Al ratios have been studied in both as-cast and extruded conditions. The results indicated that by increasing Ca/Al ratio, new Mg₂Ca intermetallic introduces to the Al₂Ca phase in eutectic structure. Computer-aided cooling curve analysis confirmed the formation of these phases during solidification. Extrusion process not only altered the size of large bulk Al₂Ca intermetallic, but also changed the size and morphology of intermetallics in eutectic structure considerably. The results showed that with increasing Ca/Al ratio, tensile properties of cast composites changes slightly, but significant enhancement is observed after extrusion process. The strength and elongation values of Mg–12.5Al–12.5Ca (Ca/Al = 1) alloy improved from 166 MPa and 2% in as-cast condition to 465 MPa and 12% in hot-extruded condition. The reason for the improved toughness may be attributed to the formation of finer and well-dispersed distribution of hard (Al₂Ca) and ductile (Mg₂Ca) phases. It was found that hot extrusion easily deforms ductile Mg₂Ca phase in comparison with Al₂Ca phase. In as-extruded condition, there are more very fine dimples than as-casted condition because extrusion process leads to formation of fragmented tiny particles and more uniformity distribution of Al₂Ca particles.     

Mg NMR site analysis in metals and intermetallics

Nuclear magnetic resonance (NMR) of the low abundance and low gyromagnetic ratio isotope ²⁵Mg, I=5/2, 2.606 MHz/T, 10% abundant, is shown here to provide an informative probe for phase identification, site symmetry and site multiplicity of the intermetallic compounds which occur as strengthening precipitate phases in lightweight alloys. The intermetallics discussed here, Mg₁₇Al₁₂, MgZn₂, Mg₂Al₃ and Al₂CuMg, are the final equilibrium precipitate phases in a number of Mg- and Al-based heat-treatable alloys. The ²⁵Mg spectra of Mg in Al–10 at%Mg alloy show the progressive precipitation of Mg₂Al₃ from Mg in solid solution as a function of annealing time at 150 °C. Also reported are ²⁵Mg spectra for CuMg₂, Mg₄₄Al₁₅Zn₄₁ and Mg₂Sn, along with the counter atom ⁶⁷Zn and ⁶³Cu NMR spectra for MgZn₂ and CuMg₂. All spectra are simulated to determine nuclear interaction parameters and confirm site occupancy.     

Predictions of mechanical and thermodynamic properties of Mg17Al12 and Mg2Sn from first-principles calculations

Using first-principles calculations, we predict mechanical and thermodynamic properties of both Mg₁₇Al₁₂ and Mg₂Sn precipitates in Mg–Al–Sn alloys. The elastic properties including the polycrystalline bulk modulus, shear modulus, Young’s modulus, Lame’s coefficients and Poisson’s ratio of both Mg₁₇Al₁₂ and Mg₂Sn phases are determined with the Voigt–Reuss–Hill approximation. Our results of equilibrium lattice constants agree closely with previous experimental and other theoretical results. The ductility and brittleness of the two phases are characterized with the estimation from Cauchy pressure and the value of B/G. Mechanical anisotropy is characterized by the anisotropic factors and direction-dependent Young’s modulus. The higher Debye temperature of Mg₁₇Al₁₂ phase means that it has a higher thermal conductivity and strength of chemical bonding relative to Mg₂Sn. The anisotropic sound velocities also indicate the elastic anisotropies of both phase structures. Additionally, density of states and Mulliken population analysis are performed to reveal the bonding nature of both phases. The calculations associated with phonon properties indicate the dynamical stability of both phase structures. The temperature dependences of thermodynamic properties of the two phases are predicted via the quasi-harmonic approximation.     

Bi，Sb及稀土元素对AZ91镁合金高温性能影响机理研究

利用大角重位点阵概念建立了AZ91镁合金基体(α相)和镁［0001］对称倾斜晶界原子结构模型,应用实空间的连分数方法计算了体系的结构能,环境敏感镶嵌能以及相互作用能.结果发现,在镁合金基体中,Al和稀土形成团簇时比较稳定,Al,Bi或Sb与稀土形成团簇时不稳定.Bi或Sb和稀土元素同时存在于AZ91镁合金中时,一方面Bi或Sb将可与RE结合形成RE₂Bi(RE₂Sb)或RE-Bi(RE-Sb)化合物弥散分布于晶界,另一方面镁合金基体中会形成Al_{11关键词： 电子理论 晶界偏聚 合金元素 高温性能}     

Bi，Sb合金化对AZ91镁合金组织、性能影响机理研究

利用大角重位点阵模型建立了AZ91镁合金α相［0001］对称倾斜晶界原子结构模型，应用实空间的连分数方法计算了Mg合金的总结构能，合金元素引起的环境敏感镶嵌能及原子间相互作用能，讨论了主要合金元素Al及Bi，Sb在AZ91中的合金化行为.计算结果表明，Al，Bi，Sb固溶于α相内或晶界区使总结构能都降低，起到固溶强化作用；合金元素在AZ91α相内趋于均匀分布，在晶界区易占位于三角椎上部.AZ91镁合金中加入Bi或Sb时，Bi或Sb比Al容易偏聚于晶界，从而抑制了Al在晶界的偏聚，促进基体中连续的Mg₁₇Al₁₂相的析出，提高AZ91合金室温性能； AZ91合金中(α相内和晶界区)主要合金元素Al和微加元素Bi，Sb都能够形成有序相Mg₁₇Al₁₂，Mg₃Bi₂或Mg₃Sb₂，且在晶界区形成的量大.Bi，Sb加入AZ91合金中，由于Bi，Sb抑制Al在晶界的偏聚，晶界区主要析出相为Mg₃Bi₂或Mg₃Sb₂，提高镁合金高温性能. 关键词： 电子理论 合金化 晶界偏聚 镁合组织与性能     

Electronic structural, elastic properties and thermodynamics of Mg17Al12, Mg2Si and Al2Y phases from first-principles calculations

Electronic structures, elastic properties and thermal stabilities of Mg₁₇Al₁₂, Mg₂Si and Al₂Y have been determined from first-principle calculations. The calculated heats of formation and cohesive energies show that Al₂Y has the strongest alloying ability and structural stability. The brittle behavior and structural stability mechanism is also explained through the electronic structures of these intermetallic compounds. The elastic constants are calculated, the bulk moduli, shear moduli, Young's moduli and Poisson ratio value are derived, the brittleness and plasticity of these phases are discussed. Gibbs free energy, Debye temperature and heat capacity are calculated and discussed.     

Evolution of the electronic properties of transition metal nanoclusters on graphite surface

The electronic properties of nanoclusters of transition (Ni, Co, Cr) and noble (Au, Cu) metals deposited on the surface of highly oriented pyrolytic graphite (HOPG) are studied using the method of X-ray photoelectron spectroscopy. The laws of variation of a change ΔE _b in the binding energies of core-level electrons in the initial (ΔE _i) and final (ΔE _f) states of atoms in nanoclusters, the intrinsic widths γ of photoelectron lines, and their singularity indices α as functions of the metal cluster size d are determined. A qualitative difference in behavior of the ΔE _i(d) and α(d) values in metals of the two groups (Ni, Cr versus Co, Cu) is found. The values of the final-state energy (ΔE _f < 0) and the line width (Δγ > 0) in the clusters of all metals studied vary in a similar manner. It is shown that a significant contribution to E _i is due to a transfer of the valence-shell electrons at the cluster-substrate interface, which is caused by the contact potential difference. The value of an uncompensated charge per nanocluster is determined as a function of the cluster size and the number of atoms in the cluster. The behavior of ΔE _f(d) is controlled by the Coulomb energy of a charged cluster and by a decrease in the efficiency of electron screening, which is different in the metals studied. The broadening of photoelectron lines is determined by a spread of the cluster sizes and by lower electron screening in the final Fermi system. An asymmetry of the core-level electron spectra of nanoclusters can be explained using notions about the electron-hole pair excitation near the Fermi level. The effect of the structure of the density of electron states in the d band of transition metals on the asymmetry of photoelectron lines is considered and it is concluded that this structure near the Fermi level qualitatively changes with a decrease in the nanocluster size. The obtained results indicate that the behavior of the electron subsystem of clusters of the d-metals in a size range of 2–10 nm under consideration is close to the behavior of a normal Fermi system.     

“Forbidden” reflections in resonant diffraction of synchrotron radiation in yttrium aluminum garnet Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>

The purely resonant Bragg reflections (13, 13, 0) and (14, 0, 0) in yttrium aluminum garnet Y₃Al₅O₁₂ at energies near the K absorption edge of yttrium have been studied experimentally and theoretically. The anisotropic tensor atomic factor of yttrium corresponding to dipole-dipole resonance transitions depends on three independent parameters changing with energy. The intensities of the reflections (14, 0, 0) and (13, 13, 0) are shown to depend on the parameter difference f ₁(E) − f ₂(E) and the parameter f ₃(E), respectively, which are attributable to distortions of the wave functions of the excited atoms and change greatly with photon energy E. Studying various reflections has allowed one to determine the various components of the tensor atomic factor and to compare them with the results of numerical calculations.