中孔沸石新材料MCM－41──Ⅰ．合成、酸性及稳定性

中孔沸石新材料ＭＣＭ－４１──Ⅰ．合成、酸性及稳定性赵修松，王清遐，徐龙伢，谢紊娟（中国科学院大连化学物理研究所，大连１１６０２３）李新生（中国科学院大连化学物理研究所催化基础国家重点实验室，大连１１６０２３）关键词ＭＣＭ－４１沸石，合成，酸性，稳定...     

无溶剂高度分散Ni/MCM-41催化剂的制备及其萘加氢性能

分别用机械研磨无溶剂法、添加柠檬酸无溶剂法制备了Ni/MCM-41催化剂,对所制催化剂进行了分析表征,探究其萘加氢反应性能并与常规浸渍法进行了对比。与常规浸渍法相比,机械研磨无溶剂法所制催化剂的物理性质相近,金属镍分散度和萘加氢性能略有提高;添加柠檬酸无溶剂法则显著提升了催化剂的分散度和萘加氢性能,金属镍分散度由6.9%大幅提高至67.9%,萘加氢性能提高了近1倍。通过红外光谱、紫外光谱和热重分析,提出了添加柠檬酸对无溶剂法制备催化剂性能的促进作用机制。     

Fe/MCM-41 as a promising heterogeneous catalyst for ozonation of p-chlorobenzoic acid in aqueous solution

Mesoporous MCM-41 and Fe loaded MCM-41（Fe/MCM-41）,which were successfully prepared by a hydrothermal method and a dipping method respectively,were applied as heterogeneous catalysts for ozonation of p-chlorobenzoic acid（p-CBA） in aqueous solution.MCM-41 and Fe/MCM-41 were characterized by XRD,FT-IR and diffuse reflectance UV-vis（DR-UV-vis） techniques. The presence of either MCM-41 or Fe/MCM-41 improves p-CBA and total organic carbon（TOC） removal efficiency compared to ozonation alone.Under the experimental condition,TOC removal rate of Fe/MCM-41/O₃ process is over 63.5%at 60 min oxidation time,44.5%using MCM-41 as catalyst,only 37.7%with ozonation alone.The presence of tert-butanol（TBA） in the Fe/MCM-41/ O₃ process indicated that the oxidation mechanism of p-CBA occurs via OH in the liquid bulk.And Fe/MCM-41 is a promising catalyst.     

Incorporation of heteropoly acid,tungstophosphoric acid within MCM-41 via impregnation and direct synthesis methods for the fabrication of composite membrane of DMFC

A heteropoly acid, tungstophosphoric acid (here-in-after TPA) with super acid strength was successfully encaged by two different methods, impregnation and direct synthesis. XRD and FT-IR analyses indicate that significant amount of TPA encaged by impregnation method should have been washed out upon washing treatment for TPA-MCM-41 powder. Due to significant loss of TPA upon washing, TPA was directly synthesized within MCM-41 pore channels using sodium tungstate dehydrate, disodium hydrogenphosphate dodecahydrate and hydrochloric acid. Compared to impregnation method, TPA was more effectively encaged and XRD analyses clearly show that reasonable amount of TPA in TPA-MCM-41 remains even after washing. A uniform distribution of directly synthesized TPA within MCM-41 pore channel was also confirmed by TEM images. In second part of this study, various TPA-encaged MCM-41 powders were used to fabricate composite membranes. For comparison, composite membranes fabricated with calcined MCM-41 and raw TPA, Nafion^® 115 and casting Nafion^® membrane were also prepared.     

Preparation and Acid Catalytic Activity of TiO2 Grafted Silica MCM-41 with Sulfate Treatment

TiO2 grafted silica MCM-41 catalyst with and without sulfate treatment were prepared. The structural and acid properties of these materials were investigated by XRD, N2 adsorption-desorption, element analysis, thermal analysis, Raman and FTIR measurements. Their acid-catalytic activities were evaluated using the cyclization reaction of pseudoionone. It was found that the obtained materials possess well-ordered mesostructure, and the grafted TiO2 components were in highly dispersed amorphous form. T/MCM41 without sulfation contained only Lewis acid sites, while Br?nsted and Lewis acidities were remarkably improved for the sulfated materials ST/MCM41 and d-ST/MCM41. T/MCM-41 was not active for the cyclization reaction of pseudoionone, but ST/MCM-41 and d-ST/MCM-41 possessed favorable catalytic activities. The catalytic performance of ST/MCM-41 was comparable with that of the commercial solid acid catalyst of Amberlyst-15, and better than that of d-ST/MCM-41, although the latter underwent a second TiO2 grafting process and accordingly had higher Ti and S content. The specific surface structure of Si-O-Ti-O-S=O in ST/MCM-41 and the bilateral induction effect of Si and S=O on Si-O-Ti bonds were speculated to account for its higher acid catalytic activity.     

MCM-41 anchored sulfonic acid (MCM-41-R-SO3H): A mild, reusable and highly efficient heterogeneous catalyst for the Biginelli reaction

An efficient three-component synthesis of 3A-dihydropyrimidinones using MCM-41 anchored sulfonic acid (MCM-41-R-SO3H) as a mild, heterogeneous catalyst for Biginelli reaction in CH3CN under reflux condition is described.     

MCM-41-anchored sulfonic acid (MCM-41-SO3H): An efficient heterogeneous catalyst for green organic synthesis

MCM-41-anchored sulfonic acid (MCM-41-SO₃H) used as a solid acid catalyst has been reported in recent years for various synthetic protocols. The superior advantage of MCM-41-SO₃H is that it can be recovered and reused several times without loss of its efficiency. In this tutorial review, we attempt to give an overview of the use of MCM-41-SO₃H as a solid and heterogeneous catalyst in the synthesis of various organic compounds that have industrial and pharmaceutical applications.     

MCM-41 anchored sulfonic acid （MCM-41-R-SO3H）： A mild,reusable and highly efficient heterogeneous catalyst for the Biginelli reaction

An efficient three-component synthesis of 3,4-dihydropyrimidinones using MCM-41 anchored sulfonic acid （MCM-41-R-SO3H） as a mild, heterogeneous catalyst for Biginelli reaction in CH3CN under reflux condition is described.     

Gas adsorption in mesoporous micelle-templated silicas: MCM-41, MCM-48, and SBA-15

This paper reports a molecular simulation and experimental study on the adsorption and condensation of simple fluids in mesoporous micelle-templated silicas MCM-41, MCM-48, and SBA-15. MCM-41 is described as a regular cylindrical silica nanopore, while SBA-15 is assumed to be made up of cylindrical nanopores that are connected through lateral channels. The 3D-connected topology of MCM-48 is described using a gyroid periodic minimal surface. Argon adsorption at 77 K is calculated for the three materials using Grand Canonical Monte Carlo simulations. Qualitative comparison with experiments for nitrogen adsorption in mesoporous micelle-templated silicas is made. The adsorption isotherm for SBA-15 resembles that for MCM-41. In particular, capillary condensation and evaporation are not affected by the presence of the connecting lateral channels. In contrast, the argon adsorption isotherm for MCM-48 departs from that for MCM-41 having the same pore size. While condensation in MCM-41 is a one-step process, filling of MCM-48 involves two successive jumps in the adsorbed amounts which correspond to condensation in different domains of the porosity. The condensation pressure for MCM-48 is larger than that for MCM-41. We attribute this result to the morphology of the MCM-48 surface (made up of both concave and convex regions) that differs from that for MCM-41 (concave only). Our results suggest that the pore connectivity affects pore filling when the size of the connections is comparable to that of the nanopores.     

Synthesis and catalytic performance of ZSM-5/MCM-41 composite molecular sieve from palygorskite

ZSM-5/MCM-41 composite molecular sieve has been hydrothermally synthesized through a two-step crystallization process using palygorskite (PAL) as silicon and aluminum source. The products were characterized by various means and their catalytic properties for acetalization of cyclohexanone and esterification of acetic acid and n-butanol were also investigated. In the first step ZSM-5 zeolite could be formed from the acid-treated PAL after hydrothermal treatment using tetrapropylammonium bromide as template. XRD patterns, N₂ adsorption and desorption data, and TEM images show that the composite obtained in the secondary step had a well-ordered mesoporous MCM-41 phase and a microporous ZSM-5 zeolite phase. Compared with ZSM-5, ZSM-5/MCM-41 composite possessed more total acid amount, weak acid sites and large pore structure due to the formation of MCM-41 and exhibited higher catalytic activity for the acetalization and esterification reaction.     

An efficient green catalyst comprising 12-tungstophosphoric acid and MCM-41: synthesis characterization and diesterification of succinic acid,a potential bio-platform molecule

An efficient green catalyst comprising 12-tungstophosphoric acid (TPA) and MCM-41 was synthesized. The catalytic activity was evaluated for liquid phase solvent free diesterification of succinic acid. The support and the synthesized catalyst were characterized by various physico-chemical techniques. Fourier transform infrared, diffuse reflectance spectroscopy, and ³¹P NMR spectra indicate that the Keggin structure of TPA was not destroyed after anchoring to MCM-41. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy show that TPA is uniformly dispersed inside the channels without disturbing the hexagonal array of MCM-41. The present contribution reports solvent free diesterification of succinic acid with alcohols under mild reaction conditions. The catalyst shows higher activity toward diester, especially for dioctyl succinate 99% yield was obtained with very high turnover number, 12.43×10⁴. Also the catalyst shows potential of being used as recyclable catalytic material after simple regeneration without loss of any catalytic activity.     

Adsorption of 2-methylbenzoic acid onto MCM-41 mesoporous material: kinetics and equilibrium studies

Ordered mesoporous molecular sieves are widely studied as alternative materials in areas where sorptive and catalytic applications are required. MCM-41 type mesoporous material was tested as sorbent of 2-methylbenzoic acid (MBA), an aromatic carboxylic acid selected as model molecule for adsorption studies on mesoporous silicas. Adsorption kinetic studies of MBA on MCM-41 type materials were carried out using ethanol solutions at different MBA concentrations. Experimental results followed Langmuir isotherm model showing large adsorption capacity (3.5?g/g). Two kinetic models, the pseudo first- and second-order, were selected to describe the adsorption process and to determine the best model fitting with the experimental data. Kinetic parameters for each kinetic equation were calculated and discussed. It was shown that the MBA adsorption process onto MCM-41 material could be described by the pseudo-second-order equation and that the MCM-41 performs as a suitable adsorbent material.     

过渡金属改性MCM-41的结构及对苯催化氧化的研究

制备了Ti,Fe,Cr,Ni改性的MCM-41,采用XRD、低温N₂吸附及TPD手段研究了改性MCM-41的结构特征和表面性质.过渡金属可同品取代骨架Si,同品取代的能力与过渡金属离子半径有关.过渡金属改性MCM-41均具有较好的长程有序结构、均一的孔径分布和较高的比表面积.引入不同的过渡金属可以改变MCM-41表面酸性和亲水/憎水性.考察了改性MCM-41对苯氧化的催化性能.     

Preparation, characterization and optical properties of lanthanum-(nanometer MCM-41) composite material

Nanometer MCM-41 molecular sieve was prepared under a base condition by using cetyltrimethylammonium bromide as template and tetraethyl orthosilicate as silica source by means of hydrothermal method. Lanthanum(III) was incorporated into the nanometer MCM-41 by a liquid phase grafting method. The prepared nanocomposite materials were characterized by means of powder X-ray diffraction, spectrophotometric anaylsis, Fourier transform infrared spectroscopy, low temperature nitrogen adsorption-desorption technique, solid diffuse reflectance absorption spectra and luminescence. The powder X-ray diffraction studies show that the nanometer MCM-41 molecular sieve is successfully prepared. The highly ordered mesoporous two-dimensional hexagonal channel structure and framework of the support MCM-41 is retained intact in the prepared composite material La-(nanometer MCM-41). The spectrophotometric anaylsis indicates that lanthanum exists in the prepared nanocomposite materials. The Fourier transform infrared spectra indicate that the framework of the MCM-41 molecular sieve still remains in the prepared nanocomposite materials and some framework vibration peaks show blue shifts relative to those of the MCM-41 molecular sieve. The low temperature nitrogen adsorption-desorption indicates that the guest locates in the channel of the molecular sieve. Compared with bulk lanthanum oxide, the guest in the channel of the molecular sieve has smaller particle size and shows a significant blue shift of optical absorption band in solid diffuse reflectance absorption spectra. The observed blue shift in the solid state diffuse reflectance absorption spectra of the lanthanum-(nanometer MCM-41) sample show the obvious stereoscopic confinement effect of the channel of the host on the guest, which further indicates the successful encapsulation of the guest in the host. The La-(nanometer MCM-41) sample shows luminescence.     

ZSM-5/MCM-41复合分子筛的合成与表征

以碱处理的ZSM-5浆液为硅铝源,通过水热自组装过程合成了介孔-微孔复合孔道结构的分子筛,并采用XRD、BET、HRTEM、Py-IR和水热处理等手段对合成分子筛进行了表征。结果表明,碱处理ZSM-5时的苛刻程度是影响复合分子筛合成的重要因素,适宜的碱处理条件为NaOH浓度1 mol/L、80℃时处理1 h。表征结果表明,复合分子筛具有规整互通的微孔-介孔梯级复合孔道结构,孔容、比表面积和平均孔径分别为0.63 mL/g,684 m²/g和3.76 nm,属典型的MCM-41结构;与MCM-41相比,复合分子筛的B酸(尤其是强B酸)酸量明显增强,水热稳定性显著提高。     

高酸度和高水热稳定性MCM-41的合成及萘加氢催化性能

以十六烷基三甲基溴化铵为模板剂,以具有Y沸石次级结构单元的水凝胶为前驱体,在pH=10左右的条件下合成了与MCM-41相类似的介孔分子筛。同时利用各种表征手段对合成的样品进行了一系列的表征。结果表明，所合成的样品具有六方规整结构和较厚的孔壁，并具有较强酸强度和水热稳定性。同时，考察了其负载Pd-Pt活性组分后的萘加氢反应活性和抗硫性,并与常规法合成的具有相同硅铝比的MCM-41载体进行了比较。     

Synthesis,characterization of Nafion-functionalized MCM-41 and its catalytic application in preparation of CL-20 via HNO3 electrolyte involved nitration of TAIW

Hybrid organic–inorganic MCM-41 (Mobil Composition of Matter No. 41) silicas functionalized with Nafion (perfluoroalkylsulfonic acid analogous) were prepared and characterized by Fourier Transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and N₂ adsorption analysis. The Brønsted acidity was determined by UV spectrophotometer. The prepared catalyst (SA/MCM-41) exhibited high catalytic activity in the nitration of TAIW (tetraacetylhexaazaisowurtzitan) aiming at synthesizing CL-20 (hexanitrohexaazaisowurtzitane), with the yield up to 93%. The leaching problem was not observed after several runs, demonstrating that the catalyst could be recycled and reused without losing activity.     

微波固相法制备ZnCl2/MCM-41催化剂及其催化性能

采用微波固相法、普通加热法和溶剂分散法等不同方法制备了ZnCl2/MCM-41催化剂,以XRD、FT-IR和TG-DSC等表征手段,比较了不同方法制备的催化剂中ZnCl2在分子筛表面的存在状态.XRD测定结果表明,微波固相法和溶剂分散法制备的样品可使ZnCl2完全分散于MCM-41分子筛表面,而加热法制备的样品中仍存在ZnCl2的晶相衍射峰.FT-IR、DSC和原子吸收光谱的测定结果表明,微波辐射可使ZnCl2与分子筛表面羟基发生固态相互作用形成O－Zn－Cl活性位,具有更加温和的Lewis酸性.考察了不同方法制备和不同ZnCl2负载量的催化剂在月桂烯与丙烯醛Diels-Alder反应中的催化性能,与普通加热法制备的催化剂相比,微波固相法与溶剂分散法制备的催化剂具有更好的催化活性和选择性,但微波固相法制备催化剂更为简单.     

新型MCM-41固载化铌酸催化氧化环戊烯制备戊二醛

通过可溶的草酸配合物将铌酸固载到中孔分子筛MCM-41上,得到含催化氧化活性中心的Nb₂O₅/MCM-41负载型催化剂,并用XBD,BET,N₂吸附等手段进行了表征.该催化剂在环戊烯催化氧化制备戊二醛的反应中表现出优良的催化性能,环戊烯的转化率高达100%,戊二醛收率达到50%,展现了良好的应用前景.     

Spontaneous vesicles, disks, threadlike and spherical micelles found in the solubilization of DMPC liposomes by the detergent DTAC

Iron oxide/MCM-41 nanocomposites, Fe(2)O(3)/MCM-41, containing 5%, 10%, and 20% (w/w) iron oxide, were prepared via a direct nonhydrothermal method at room temperature. The preparations were preformed by using iron(III) nitrate, tetra-ethoxysilane (TEOS), and cetyltrimethylammonium bromide (CTAB) mixed or unmixed with dodecyltrimethylammonium bromide (DTAB). The produced materials were dried and calcined at 550 °C for 3 h. Test materials were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), N(2) gas adsorption/desorption isotherms, small angle and wide angle X-ray diffraction (XRD). Results indicate that mixing of CTAB with DTAB does not harm the formation of blank MCM-41 structure. For the composite Fe(2)O(3)/MCM-41 materials, results showed formation of more stable MCM-41 structure with higher surface area and improved porosity in the presence of mixed (CTAB+DTAB) than in the presence of single (CTAB) surfactants for up to 10% Fe(2)O(3)/MCM-41 (w/w). This was explained in terms of the effect DTAB on contraction of the template micellar size to compensate for the expected size expansion upon the addition of ionic iron(III) nitrate precursor. Highly dispersed Fe(2)O(3) nanoparticles were formed in all cases even with the highest iron oxide percentage. Formation of the nanocomposites was postulated to be determined by fast nucleation and slow growth of iron oxide species, which facilitated formation of well dispersed iron oxide nanoparticles inside and on the wall of the MCM-41 material.