Crystal structure of the alcoholates and the ansolvate of PNU-97018, an angiotensin II receptor antagonist

The title compound, PNU-97018 [systemic name: 2-butyl-3,6,7,8,9,11-hexahydro-6,9-dimethyl-3-([2'-(2H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl)-6,9-ethano-4H-imidazo[4,5-d]-pyridazino[1,2-a]pyridazin-4-one] is a newly developed angiotensin II receptor antagonist. The compound and its methanolate and ethanolate were characterized by X-ray crystallography and thermal analysis. The methanolate and ethanolate crystals have an almost identical molecular conformation and crystal packing. In both alcoholates, each alcohol molecule is fixed to the compound with a molar ratio of 1 : 1 by a hydrogen bond between the hydroxyl group of the alcohol molecule and the tetrazole group of the compound. The hydroxyl group of each alcohol molecule further links with the imidazole ring of the neighboring compound by hydrogen bond to form a hydrogen-bond network in both alcoholates. A tunnel-like structure that includes alcohol molecules is formed in each alcoholate. The ansolvate crystal showed completely different thermal and X-ray crystallographic characteristics from the alcoholates, where the compound molecules were directly linked by hydrogen bonds between the tetrazole group of a molecule and the imidazole ring of the neighboring molecule. The position of the hydrogen atom in the tetrazole ring was different between the ansolvate and alcoholates. Unlike alcoholates, a layer structure stacked on the b-c plane was observed in the ansolvate crystal. It was concluded that the molecular conformation and the arrangement of the compound molecules were largely different between ansolvate and alcoholate crystals.     

Physico-chemical characterization of an active pharmaceutical ingredient

The physico-chemical properties and polymorphism of a new active pharmaceutical ingredient entity has been analyzed and the gain of knowledge during the chemical development of the substance is described. Initial crystallization revealed an anhydrous crystal form with good crystallinity and a single, sharp DSC melting peak at 171°C and a straightforward development of this crystal form seemed possible. However, during polymorphism screening, new crystalline forms were detected that were often analyzed as mixtures of crystal forms. The process of characterization and identification of the different crystalline forms and its thermodynamical relationship has been supported by a combination of experimental and computational work including determination of the three-dimensional structures of the crystal forms. The crystal structure of one polymorphic form was solved by single crystal X-ray structure analysis. Unfortunately, Mod B resisted in formation of suitable single crystals, but its structure could be solved by high resolution powder diffraction data analysis using synchrotron radiation. Calculation of the theoretical X-ray powder diffraction pattern from three dimensional crystal coordinates allowed an unambiguous identification of the different crystalline forms. Two polymorphic crystal forms of the API-CG3, named Mod A and Mod B, are enantiotropic whereas Mod B is the most stable polymorph at room temperature up to about 50°C and Mod A at temperatures above 50°C. The mechanism of the solid-solid transition can be explained by analyzing the molecular packing information gained from the single crystal structures. A third crystalline form with the highest melting peak turned out to be not a polymorphic or pseudopolymorphic crystal modification of our API-CG3 but a chemically different substance. This revised version was published online in July 2006 with corrections to the Cover Date.     

5-{[(4′-正戊基氧-4-联苯基基)羰基]氧}-1-戊炔的相转变与相结构

采用差示扫描量热(DSC)、一维(1D)广角X射线衍射(WAXD)、热台偏光显微镜(PLM-hotstage)等研究手段对含联苯液晶基元的侧链液晶聚炔单体5-{[(4′-正戊基氧-4-联苯基基)羰基]氧}-1-戊炔(A3EO5)的本体相转变和相结构进行了研究.DSC和1D-WAXD实验结果表明,A3EO5在升温和降温过程中均呈现四个相转变过程,形成双向性液晶.样品从各向同性态降温至室温过程中,首先形成近晶A相,随后进入层内排列具有准长程有序的近晶B相,继续降温将形成层内为正交排列的近晶E相,在此之后样品进入晶相.PLM结果指出样品在各向同性态降温过程中分别形成球状织构、角锥织构和同心圆弧织构.     

Preparation and characterization of side-chain liquid crystalline polymers containing chenodeoxycholic acid residue

A series of new side-chain liquid crystalline polymers containing chenodiol residue derived from 24-[4′-hydroxybiphenyl-4-yl-4-(allyloxy)benzoyloxy]-3α,7α-di{n-[4′-(4-ethoxybenzoyloxy)biphenyl-4-yloxy]-n-oxoalkanoyloxy}-5β-cholane was designed and prepared. The chemical structures of the monomer and polymer were confirmed by Fourier transform infrared and ¹H NMR spectra. The mesomorphic properties of monomer and polymer were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction. The side-chain liquid crystalline polymers revealed wide mesophase temperature range and high thermal stability, and they showed nematic liquid crystalline phase. The influence of flexible space group length on thermal properties and specific rotation was examined.     

长侧基甲壳型液晶高分子的合成及性质研究

设计并合成了一系列尾链为不同长度烷氧基的长侧基甲壳型液晶高分子聚[2,5-二(4 ′-烷氧基联苯氧羰基)苯乙烯]( PnCbiPCS,n=4,6,8,10,14).这些聚合物都具有良好的热稳定性.偏光显微镜及一维和二维广角X射线衍射等研究结果表明PnCbiPCS这一系列聚合物均能形成稳定的近晶A相结构,所对应的层间距随...     

Dehydro[12]- and -[18]annulenes fused with tetrafluorobenzene: synthesis,electronic properties,packing structures,and reactivity in the solid state

Dehydro[12]- and -[18]annulenes 3 and 4 fused with tetrafluorobenzene were newly synthesized by the copper-mediated oxidative coupling of 1,2-diethynyltetrafluorobenzene. The UV-vis spectra of 3 and 4 showed the maximum absorption to be almost identical to that of the corresponding unsubstituted benzodehydro[12]- and -[18]annulenes 1 and 2, respectively, while the reduction waves in cyclic voltammetry observed at potentials of -1.48 and -1.56 V vs Fc/Fc(+) for 3 and 4 were less negative than those for 1 and 2. In agreement with these results, theoretical calculations (B3LYP/6-31G(d)) indicated that the HOMO-LUMO gap is similar for 1 and 3 and for 2 and 4 but that the LUMO levels of 3 and 4 are apparently lowered by the electronegative fluorine substituents. The X-ray crystallography of single crystals grown from 3 (crystal A), 3.C(6)H(6) (crystal B), and a mixture of 1 and 3 (crystal C) demonstrated that the molecules of 3 are stacked in a slanted manner in crystals A and B, while those of 1 and 3 form sandwichlike 1:2 complexes (3.1.3) that are stacked in a columnar arrangement in crystal C. Despite the suitable packing for topochemical polymerization, crystals A-C were quite stable against photochemical reaction. In contrast, differential scanning calorimetry showed that the thermal polymerization occurred explosively at 120-135 degrees C.     

Preparation and property screening of the solid inclusion complex of norfloxacin with p-sulfonated calix[4]arene

The complexation of norfloxacin (NFLX) by p-sulfonated calix[4]arene (SC4A) in aqueous solution has been studied by fluorescence spectroscopy and 1H NMR spectroscopy. A 1:1 stoichiometry and a 8086 L mol(-1) stability constant of the NFLX-SC4A complex was obtained by spectrofluorometric titrations. The equimolar solid state inclusion complex of NFLX-SC4A was prepared by the co-precipitation method and then characterized by various techniques, including differential scanning calorimetry (DSC), X-ray powder diffractometry (XRD), Fourier-transform infrared analysis (FT-IR) and scanning electron microscopy (SEM). The experimental results of these chemical property screenings confirmed that NFLX and SC4A can form a stable host-guest complex in the solid state, and SC4A appears to function as a complexing and solubilizing agent for NFLX.     

Polymorphs and Polymorphic Cocrystals of Temozolomide

Crystal polymorphism in the antitumor drug temozolomide (TMZ), cocrystals of TMZ with 4,4′‐bipyridine‐N,N′‐dioxide (BPNO), and solid‐state stability were studied. Apart from a known X‐ray crystal structure of TMZ (form 1), two new crystalline modifications, forms 2 and 3, were obtained during attempted cocrystallization with carbamazepine and 3‐hydroxypyridine‐N‐oxide. Conformers A and B of the drug molecule are stabilized by intramolecular amide N? H???N_imidazole and N? H???N_tetrazine interactions. The stable conformer A is present in forms 1 and 2, whereas both conformers crystallized in form 3. Preparation of polymorphic cocrystals I and II (TMZ?BPNO 1:0.5 and 2:1) were optimized by using solution crystallization and grinding methods. The metastable nature of polymorph 2 and cocrystal II is ascribed to unused hydrogen‐bond donors/acceptors in the crystal structure. The intramolecularly bonded amide N–H donor in the less stable structure makes additional intermolecular bonds with the tetrazine C?O group and the imidazole N atom in stable polymorph 1 and cocrystal I, respectively. All available hydrogen‐bond donors and acceptors are used to make intermolecular hydrogen bonds in the stable crystalline form. Synthon polymorphism and crystal stability are discussed in terms of hydrogen‐bond reorganization.     

含吡咯三齿席夫碱配体的单核铜(Ⅱ)配合物的合成、晶体结构和性质

合成和表征了两个类似的三齿席夫碱配体(L1)-和(L2)-的铜[Ⅱ]配合物[CuL1I](1)和[CuL2I](2)(HL1为2-(2-pyridyl)-N-[1-(1H-pyrrol-2-yl)ethylidene]ethanamine;HL2为N-[1-(1H-pyrrol-2-yl)ethylidene](2-pyridyl)methanamine),并用红外光谱、电喷雾质谱、紫外-可见光谱、单晶X-射线衍射和热重分析等手段对配合物进行了表征。对配合物1的X-射线晶体结构测定表明它是一个畸变的平面正方形单核铜[Ⅱ]配合物。晶体结构还表明,除了配体的柔性和空间限制外,分子间的相互作用也是影响铜[Ⅱ]配合物结构的因素。     

[HN(C2H5)3][B5O6(OH)4]的合成、结构和热稳定性

利用水热法合成了五硼酸三乙胺[HN(C2H5)3][B5O6(OH)4], 并利用单晶X射线衍射技术解析了其结构, 同时利用傅立叶红外分析、元素分析及热分析技术加以佐证. 该化合物属于单斜晶系, 其空间群为P21/c, 相应的晶胞参数为a=1.0036(2) nm, b=1.1353(2) nm, c=1.4843(3) nm和β=106.54(3)°. 它由孤立的五硼酸阴离子[B5O6(OH)4]-和三乙胺阳离子[HN(C2H5)3]+构成. 五硼酸阴离子[B5O6(OH)4]-通过氢键构成三维网状结构, [HN(C2H5)3]+位于其中的孔道中.     

Synthesis and characterisation of star-shaped liquid crystalline polymer with a POSS core

The star-shaped POSS-graft-LCP with POSS as the core and liquid crystal polymer, poly{6-(4?-octyloxyphenyl-4″-benzoyl)hexyl acrylate}, as arms was prepared by atom transfer radical polymerisation technique using octa(3-chloropropyl) polyhedral oligomeric silsesquioxane [POSS-(CH₂CH₂CH₂Cl)₈] as initiator. For comparison, the linear liquid crystal polymer, poly{6-(4?-octyloxyphenyl-4″-benzoyl)hexyl acrylate} (LLCP), was obtained by conventional radical polymerisation. Both liquid crystal polymers were characterised by FT-IR, ¹H NMR, ¹³C NMR, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, polarised optical microscopy and X-ray diffraction analysis. The liquid crystal phase behaviour research demonstrated that both liquid crystal polymers were reversible thermotropic nematic liquid crystal materials. The number of polymerisation degree of every arm attached on POSS in POSS-graft-LCP impacted greatly on the liquid crystal properties and only a small one was necessary for it to exhibit a broad liquid crystal range. Results further demonstrated that the special star-shaped topology of POSS and the eight arms attached helped POSS-graft-LCP form and stabilise liquid crystal phase easily. This research may further expand the way to star-shaped LCPs by employing a variety of (meth)acrylate and other vinyl liquid crystalline monomers.     

Characterization of hydrates of norfloxacin

Norfloxacin, a nalidixic acid analog with antimicrobial properties, exists in different hydrated forms. Three of these crystal forms were reproducibly prepared and characterized by analytical techniques that included infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, differential scanning calorimetry, solution microcalorimetry and pulsed nuclear-magnetic resonance spectroscopy.These studies showed that the dihydrate is the thermodynamically stable entity at ambient temperatures and humidities.     

Self-assembled thermoreversible gels of nonpolar liquids by racemic propargylic alcohols with fluorinated and nonfluorinated aromatic rings

The synthesis and colloidal study of a new class of low molecular weight organogelators is reported. Racemic propargylic alcohols with perfluoroaryl and nonfluorinated aryl rings are capable of forming gels in alkane liquids and/or silicone oil. A full colloidal characterization of alkane gels prepared from (R/S)-1-pentafluorophenyl-3-phenylprop-2-yn-1-ol [(R/S)- 1] was conducted, including both structural [optical microscopy, scanning electron microscopy (SEM), powder X-ray diffraction (XRD), attenuated total reflectance infrared spectroscopy (ATR-IR)] and thermal stability [differential scanning calorimetry (DSC)] studies. A model of the organization of gelator molecules within gel fibers has been proposed primarily based on the correlation of diffraction data for the powder XRD pattern of a gel and a simulated powder pattern from a sublimed crystal of the gelator. Furthermore, structural requirements for propargylic alcohol gelators were investigated by subjecting derivatives with modified structures to gelation tests. An enantiomerically enriched sample [(R)- 1, 83% ee] fails to entrap the solvent under conditions where the racemate successfully forms a gel. The remaining racemic derivatives (with p-alkoxy or p-alkyl substituents on the nonfluorinated arene) form gels or partial gels in silicone oil and in some alkane preparations.     

Characterization of physical state of mannitol after freeze-drying: effect of acetylsalicylic acid as a second crystalline cosolute

Freeze-drying of mixed solutes is a preparative technique widely used in the pharmaceutical industry. The presence of an amorphous form or changes in the crystalline form can affect solid state stability. In this work, acetylsalicylic acid (AAS) was chosen as a model drug, and was mixed with mannitol, a commonly used bulking agent in formulation of tablets. Variations in the final freeze-dried crystalline forms were found after changing the ratios of the two co-solutes. Samples were analysed by powder X-ray diffractometry and differential scanning calorimetry. A major amorphous form and a minor crystalline delta-mannitol form were produced during the mannitol freeze-drying process. The crystal form of mannitol in the two-component system depended on the AAS:mannitol ratio. The AAS was mostly crystalline, regardless of the amount of mannitol present. A major delta-mannitol and a minor amorphous form were obtained when AAS was present in a high percentage (75% w/w). When AAS percentages of 50 and 25% (w/w) were present during the drying process, the mannitol was found in a highly crystalline form.     

Synthesis of the Complex Fluoride LiBaF_3 through a Solvothermal Process

The complex fluoride LiBaF3 is solvothermally synthesized at 180℃ and characterized by means of X-ray powder diffraction, scanning electron microscopy, thermogravimetric analysis and infrared spectroscopy. In the solvothermal process, the solvents, mole ratios of initial mixtures and reaction temperature play important roles in the growth of the single crystal.     

Liquid crystalline polymers XV. Synthesis,properties and cytotoxicity of photoresponsive thermotropic liquid crystalline copoly(arylidene-ether)s based on 4-tert-butylcyclohexanone and cyclohexanone moieties in the main chain

A new series of photoresponsive thermotropic liquid crystalline copoly(arylidene-ether)s based on both 4-tert-butylcyclohexanone and cyclohexanone moieties in the main chain were synthesised using solution polycondensation technique of both with different 4,4?-diformyl-α,ω-diphenoxyalkane derivatives. Two model compounds were synthesised from the reaction of each cycloalkanone monomer with benzaldehyde, and their structures were determined using single crystal X-ray diffraction. The structure of the monomers and copolymers was confirmed by elemental and spectral analyses. In addition, the thermal stabilities of these copolymers were evaluated by thermogravimetric analysis. We performed both differential scanning calorimertric and polarised optical microscopic measurements to investigate the thermotropic liquid crystalline properties of synthesised copolymers. The UV?Vis absorption spectroscopy of the liquid crystalline copoly(arylidene-ether) 6f revealed that the system undergoes Entgegen/Zusammen (E/Z) photoisomerisation using UV lamp (450 nm). Moreover, the various characteristics of the prepared copolymers including: solubility, X-ray diffraction analysis, gel permeation chromatography (GPC) and scanning electron microscopy were determined and discussed. The cytotoxicity of the model compounds and selected examples of these copolymers was tested against MCF-7 breast cancer cells. All tested samples showed considerable results, where 6c copolymer gave the best result; it showed cytotoxicity against MCF-7 cell line with IC₅₀ of 0.26 µM.     

Polymorphism in crystalline cinchomeronic acid

The structural relationship between the two crystal forms of cinchomeronic acid (CA 3,4-dicarboxypyridine) has been investigated by single crystal X-ray diffraction, IR and Raman spectroscopy and solid state NMR spectroscopy, showing that the two polymorphs form a monotropic system, with the orthorhombic form I being the thermodynamically stable form, while the monoclinic form II is unstable. In both forms CA crystallizes as a zwitterion and decomposes before melting. The crystal structure and spectroscopic analysis indicate that the difference in stability can be ascribed to the strength of the hydrogen-bonding patterns established by the protonated N-atom and the carboxylic/carboxylate O-atoms.     

In situ observation of the four-step dehydration process of the 1 beta-methylcarbapenem antibiotic CS-834 crystal by X-rays

The 1 beta-methylcarbapenem antibiotic CS-834 takes six crystalline forms depending on ambient conditions. The X-ray powder diffraction revealed that the dihydrate crystal (B2-form) was changed to the monohydrate (B1-form) through the intermediate form (B2'-form). The monohydrate form was then changed to the dehydrate (B0-form) through the intermediate B1'-form. The progress of the dehydration along the needle axis (c-axis) was observed under a microscope. When a single crystal of the B2-form was mounted on a diffractometer and the humidity was reduced, the crystal was gradually changed to the various dehydration forms with retention of the single crystal. The crystals of B2- to B0-forms form isostructures to each other except the solvent water molecules. In the crystal structure of the B1-form, the pivaloyloxymethyl moiety is disordered. One is nearly similar to that of the B2-form, while another is similar to that of the B0-form. Each crystal structure consists of a columnar arrangement of CS-834 along the c-axis, and the water molecules are located between the columns and form a characteristic hydrogen bond network. When the water molecules leave the crystal, the columns slide slightly following the slight conformational change in the pivaloyloxymethyl groups and are connected by another type of hydrogen bond network. Such a rearrangement of the hydrogen bond network should be a motive force of the phase change to the next step due to the dehydration. Since the hydrogen bond network extends along the c-axis, the dehydration proceeds along the c-axis as observed microscopically.     

Crystal forms of a capsaicin derivative analgesic DA-5018

DA-5018 is a new capsaicin derivative and has analgesic effect. The objective of this work was to investigate the existence of polymorphs and pseudopolymorphs of DA-5018 and the transformation of crystal forms. Eight crystal forms of DA-5018 have been isolated by recrystallization and characterized by powder X-ray diffractometry (PXRD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TG). The PXRD and DSC patterns of the eight crystal forms were different respectively. In the dissolution studies in simulated intestinal fluid at 37±0.5°C, the solubility of Form 2 was the highest. And the solubility in water decreased in rank order: Form 2>Form 3>Form 1>Form 5>Form 7>Form 4>Form 6>Form 8. Eight crystal forms were shown to have a good physical stability at room temperature for 60 days.