REACTIONS OF A PHOSPHORANIMINE ANION WITH SOME ORGANIC ELECTROPHILES

Abstract

The reactions of a variety of electrophiles with the N-silyl-P-trifluoroethoxyphosphoranimine anion Me₃Sin°P(Me)(OCH₂CF₃)CH^? ₂ (1a), prepared by the deprotonation of the dimethyl precursor Me₃SiN[dbnd]P(OCH₂CF₃)Me₂ (1) with n-BuLi in Et₂O at-78°C, were studied. Thus, treatment of 1a with alkyl halides, ethyl chloroformate, or bromine afforded the new N-silylphosphoranimine derivatives Me₃SiN[dbnd]P(Me)(OCH₂CF₃)CH₂R [2: R = Me, 3: R = CH₂Ph, 4: R = CH[sbnd]CH₂, 5: R = C(O)OEt, and 6: R = Br]. In another series, when 1a was allowed to react with various carbonyl compounds, 1,2-addition of the anion to the carbonyl group was observed. Quenching with Me₃SiCl gave the O-silylated products Me₃SiN[dbnd]P(Me)(OCH₂CF₃)CH₂°C(OSiMe₃)R¹R² [7: R ¹ = R ² = Me; 8: R ¹ = Me, R ² = Ph; 9: R¹ = Me, R ² = CH[sbnd]CH₂; and 10: R ¹ = H, R ² = Ph]. Compounds 2–10 were obtained as distillable, thermally stable liquids and were characterized by NMR spectroscopy (¹H, ¹³C, and ³¹P) and elemental analysis.     

Sekundäre Hydroxyalkylphosphane: Synthese und Charakterisierung mono‐, bis‐ und trisalkoxyphosphan‐substituierter Zirconiumkomplexe und des heterobimetallischen Dreikernkomplexes [Cp2Zr{O(CH2)3PHMes(AuCl)}2]

Secondary Hydroxyalkylphosphanes: Synthesis and Characterization of Mono‐, Bis‐ and Trisalkoxyphosphane‐substituted Zirconium Complexes and the Heterobimetallic Trinuclear Complex [Cp₂Zr{O(CH₂)₃PHMes(AuCl)}₂] The secondary hydroxyalkylphosphanes RPHCH₂OH [R = 2,4,6‐Me₃C₆H₂ (Mes) ( 1 ), 2,4,6‐ⁱPr₃C₆H₂ (Tipp) ( 2 )], 1‐AdPH‐2‐OH‐cyclo‐C₆H₁₀ ( 3 ) and RPH(CH₂)₃OH [R = Ph ( 4 ), Mes ( 5 ), Tipp ( 6 ), Cy ( 7 ), ^tBu ( 8 )] were obtained from primary phosphanes RPH₂ and formaldehyde ( 1 , 2 ) or from LiPHR and cyclohexene oxide ( 3 ) or trimethylene oxide ( 4 ‐ 8 ). Starting from 5 or 7 and [Cp^R₂ZrMe₂] [Cp^R = C₅EtMe₄ (Cp°), C₅H₅ (Cp), C₅MeH₄ (Cp′)], the monoalkoxyphosphane‐substituted zirconocene complexes [Cp^R₂Zr(Me){O(CH₂)₃PHMes}] [Cp^R = Cp° ( 9 ), Cp ( 10 )] were prepared. With [Cp^R₂ZrCl₂], the bisalkoxyphosphane‐substituted complexes [Cp′₂Zr{O(CH₂)₃PHMes}₂] ( 11 ) and [Cp₂Zr{O(CH₂)₃PHCy}₂] ( 12 ) are obtained, and with [Tp^RZrCl₃], the trisalkoxyphosphane‐substituted zirconium complexes [Tp^RZr{O(CH₂)₃PHMes}₃] [Tp^R = trispyrazolylborato (Tp) ( 13 ), Tp^R = tris(3,5‐dimethyl)pyrazolylborato (Tp*) ( 14 )] are prepared. The reaction of 5 with [AuCl(tht)] (tht = tetrahydrothiophene) yielded the mononuclear complex [AuCl{PHMes(CH₂)₃OH}] ( 15 ). The trinuclear complex [Cp₂Zr{O(CH₂)₃PHMes(AuCl)}₂] ( 16 ) was obtained from [Cp₂ZrCl₂] and 15 . Compounds 1 ‐ 16 were characterized spectroscopically (¹H‐, ³¹P‐, ¹³C‐NMR; IR; MS) and compound 2 also by crystal structure determination. The bis‐ and trisalkoxyphosphane‐substituted complexes 11‐14 and 16 were obtained as mixtures of two diastereomers which could not be separated.     

Synthesis and structures of new 1,3,6,2-dioxazaborocanes containing substituents in the ocane fragment

New 1,3,6,2-dioxazaborocanes R¹N(CHR³CR⁴R²O)(CHR⁶CHR⁵O)BX (1–11, X = Ph, 4-MeC₆H₄, Me; R¹ = Me, PhCH₂; R², R³, R⁴, R⁵, R⁶ = H, Ph) were synthesized by the reactions of aryl- or methylboronic acids with dialkanolamines. The treatment of (Me₂NCH₂CH₂O)₃B (15) with MeN(CH₂CH₂OH)(CH₂CPh₂OH) afforded 2-[2-(dime-thylamino)ethoxy]-1,3,6,2-dioxazaborocane (12). 2-Fluoro-1,3,6,2-dioxazaborocanes R¹N(CHR³CHR²O)(CH₂CH₂O)BF (13: R¹ = PhCH₂, R² = R³ = H; 14: R¹ = Me, R² = R³ = Ph, threo) were synthesized by the reaction of bis(trimethylsilyl) ethers of the corresponding dialkanolamines with BF₃·Et₂O. The new borocanes can be used for the synthesis of the corre-sponding germanium derivatives PhCH₂N(CH₂CH₂O)₂GeX₂ (16, X = OEt; 17, X = Cl), as exemplified by the reaction of compound 6. The structures of erythro-MeN(CH₂CH₂O)(CHPhCHPhO)BPh (3), threo-MeN(CH₂CH₂O)(CHPhCHPhO)BPh (4), erythro-MeN(CH₂CH₂O)(CHPhCHPhO)B(4-MeC₆H₄) (8), and PhCH₂N(CH₂CH₂O)₂BF (13) were established by X-ray diffraction. The coordination polyhedra of the boron atoms in these complexes can be described as distorted tetrahedra. The boron-nitrogen distances (1.705(7)–1.723(3) Å) provide unambiguous evidence for the presence of the B←N transannular interaction in these compounds. The structures of the resulting borocanes containing phenyl substituents at the carbon atoms of the ocane skeleton were studied by NMR spectroscopy and quantum chemical density functional theory calculations.     

Richtlinien und Bemerkungen der Redaktion und des Verlages für Abfassung von Manuskripten für die Zeitschrift für anorganische und allgemeine Chemie

Reaction of Trimethylsilylethers of Unsaturated Alcohols with Schwartz Reagent – Stabilisation of Cyclic Zirconiumorganic Compounds by the Moiety Cp₂ZrH₂ Besides the normal product of hydrozirconation the reaction of allyltrimethylsilylethers CH₂? CHC(R¹R²)OSi(CH₃)₃ ( I : R¹ = R² = H, VIII : R¹ = R² = CH₃, X : R¹ = H, R² = CH₃) with Cp₂Zr(H)Cl yields, as a result of a hydrogenation of the Si? O bond, trimethylsilane and a series of compounds with a Zr? O bond. Depending on the substitution of the α-C atom either dimeric chelates ( III ) or binuclear complexes of the type Cp₂Zr(Cl)CH₂CH₂C(R¹R²)OZr(Cl)Cp₂ ( IX : R¹ = R² = CH₃; XII : R¹ = H, R² = CH₃) are formed. Starting with X and excess Cp₂Zr(H)Cl the binuclear compound XIII is obtained which may be considered as an adduct of Cp₂ZrH₂ to the unsaturated chelate Compound XVII with a structure analogous to XIII is synthesized by the reaction of IX with Cp₂ZrH₂. The ¹H-NMR spectrum is in accordance with the existence of cis-trans-isomers of this complex.     

Synthesis and characterization of some bis(cyclopentadienyl)titanium(IV) complexes with internally functionalized oximes(LH): sol–gel transformations of Cp2TiCl2, Cp2TiClL and Cp2TiL2 to nano‐sized anatase titania

Some bis(cyclopentadienyl)titanium(IV) complexes of the type [Cp₂TiCl_2?n{L}_n] {where, n = 1 or 2; L = ONC(R)Ar; R = H or CH₃ and Ar = C₅H₄N‐2, C₄H₃O‐2 or C₄H₃S‐2} have been synthesized by the metathetical reactions of Cp₂TiCl₂ with the sodium salt of internally functionalized oximes in 1:1 and 1:2 stoichiometry in anhydrous THF. All these red to brown colored solid derivatives have been characterized by elemental analyses, FT‐IR and NMR (¹H and ¹³C{¹H}) spectral studies. The FAB mass spectra of some representative derivatives indicate their monomeric nature. Oximato ligands in all the complexes appear to bind the titanium via N and O in a dihapto ( ‐N, O) manner in the solid state. Thermogravimetric curves of [Cp₂TiCl{ONC(CH₃)C₅H₄N‐2}] and [Cp₂Ti{ONC(CH₃)C₅H₄N‐2}₂] suggest the formation of hybrid materials CpTiO(Cl) and Cp₂TiO, respectively, as the final products at 900 °C under nitrogen atmosphere. Sol–gel transformations of Cp₂TiCl₂, [Cp₂TiCl{ONC(CH₃)C₅H₄N‐2}] and [Cp₂Ti{ONC(CH₃)C₅H₄N‐2}₂] yielded titania a–c, respectively, at low sintering temperature (600 °C). The powder XRD patterns, IR as well as Raman spectra of all these oxides indicate the formation of nano‐sized anatase phase. The SEM images of titania a–c indicate agglomers like surface morphologies. The absorption spectra of a–c exhibit an energy band gap in the range of 3.47–3.71 eV. Copyright © 2011 John Wiley & Sons, Ltd.     

Diacetonalkohol als Komplexligand. Die Kristallstrukturen von [MnBr2{O=C(Me)CH2–C(Me)2OH}2] und [M{O=C(Me)CH2–C(Me)2OH}2][MCl4] mit M = Fe,Co und Zn

Diacetone Alcohol as Complex Ligand. Crystal Structures of [MnBr₂{O=C(Me)CH₂–C(Me)₂OH}₂] and [M{O=C(Me)CH₂–C(Me)₂OH}₂][MCl₄] with M = Fe, Co, and Zn The metal halides MnBr₂ and MCl₂ (M = Fe, Co, Zn) react with diacetone alcohol (4-hydroxy-4-methyl-2-pentanon) forming the title compounds, which are characterized by IR spectroscopy and crystal structure analyses. [MnBr₂{O=C(Me)CH₂–C(Me₂)OH}₂] ( 1 ): Space group C2/c, Z = 4, lattice dimensions at 293 K: a = 1189.2(4), b = 1317.2(3), c = 1200.0(3) pm, β = 102.25(3)°, R₁ = 0.0256. In 1 the manganese atom is coordinated in a distorted octahedral fashion by the two cis bromine atoms and by the four oxygen atoms of the two diacetone alcohol chelating molecules. The distances Mn–[OH] (223.8 pm) and Mn–[O=C] (222.1 pm) are only slightly different. [M{O=C(Me)CH₂–C(Me)₂OH}₂][MCl₄] [M = Fe ( 2 ), Co ( 3 ), Zn ( 4 )]: 2 and 3 crystallize isotypically with each other in the space group Pc, Z = 4. Lattice dimensions for 2 at 293 K: a = 865.8(3), b = 926.3(2), c = 1401.5(1) pm, β = 104.19(2)°, R₁ = 0.0421. Lattice dimensions for 3 at 293 K: a = 872.3(1), b = 925.7(1), c = 1394.2(3) pm, β = 104.79(2)°, R₁ = 0.0481. As in 1 , the metal atoms of the [M{O=C(Me)CH₂–C(Me)₂OH}₂]²⁺ ions in 2 and 3 are chelated in a distorted octahedral fashion by two diacetone alcohol molecules and associated cis via two μ-Cl atoms of the [MCl₄]^2– anions to form strands. [Zn{O=C(Me)CH₂–C(Me)₂OH}₂][ZnCl₄] ( 4 ): Space group C2/c, Z = 4. Lattice dimensions at 213 K: a = 1582.27(13), b = 1356.15(13), c = 941.93(7) pm, β = 107.283(10)°, R₁ = 0.0328. The zinc atom of the dication in 4 is associated in a distorted octahedral fashion by the two diacetone alcohol chelating molecules in the equatorial positions and trans by two μ-Cl atoms of the [ZnCl₄]^2– ions to form strands.     

Bis(N‐acetyltriethylphosphaniminium)‐tetraacetato‐dichloro‐dicuprat(II), [MeC(O)N(H)PEt3]2[Cu2(O2C–Me)4Cl2]

Bis(N‐acetyltriethylphosphaneiminium)‐tetraacetato‐dichloro‐dicuprate(II), [MeC(O)N(H)PEt₃]₂[Cu₂(O₂C–Me)₄Cl₂] The title compound has been prepared by the reaction of Me₃SiNPEt₃ with [Cu₂(O₂C–Me)₄] and MeC(O)Cl in dichloromethane solution to give colourless crystals which include four molecules CH₂Cl₂ per formula unit. The complex is characterized by IR spectroscopy and by a crystal structure determination. [MeC(O)N(H)PEt₃]₂[Cu₂(O₂C–Me)₄Cl₂] · 4 CH₂Cl₂: Space group P2₁/n, Z = 2, lattice dimensions at –70 °C: a = 794.1(1), b = 2356.9(6), c = 1327.3(2) pm; β = 91.00(1)°; R₁ = 0.0597. The structure consists of N‐acetyltriethylphosphaneiminium cations and dianions [Cu₂(O₂C–Me)₄Cl₂]^2– which form an iontriple with N–H…Cl hydrogen bridges.     

A DFT Quantum‐Chemical Study of Ion‐Pair Formation for the Catalyst Cp2ZrMe2 /MAO

A process of ion‐pair formation in the system Cp₂ZrMe₂/methylaluminoxane (MAO) has been studied by means of density functional theory quantum‐chemical calculations for MAOs with different structures and reactive sites. An interaction of Cp₂ZrMe₂ with a MAO of the composition (AlMeO)₆ results in the formation of a stable molecular complex of the type Al₅Me₆O₅Al(Me)O–Zr(Me)Cp₂ with an equilibrium distance r(Zr–O) of 2.15 Å. The interaction of Cp₂ZrMe₂ with “true” MAO of the composition (Al₈Me₁₂O₆) proceeds with a tri‐coordinated aluminum atom in the active site (OAlMe₂) and yields the strongly polarized molecular complex or the μ‐Me‐bridged contact ion pair ( d ) [Cp₂(Me)Zr(μMe)Al≡MAO] with the distances r(Zr–μMe) = 2.38 Å and r(Al–μMe) = 2.28 Å. The following interaction of the μ‐Me contact ion pair ( d ) with AlMe₃ results in a formation of the trimethylaluminum (TMA)‐separated ion pair ( e ) [Cp₂Zr(μMe)₂AlMe₂]⁺–[MeMAO]^– with r[Zr–(MeMAO)] equal to 4.58 Å. The calculated composition and structure of ion pairs ( d ) and ( e ) are consistent with the ¹³C NMR data for the species detected in the Cp₂ZrMe₂/MAO system. An interaction of the TMA‐separated ion pair ( e ) with ethylene results in the substitution of AlMe₃ by C₂H₄ in a cationic part of the ion pair ( e ), and the following ethylene insertion into the Zr–Me bond. This reaction leads to formation of ion pair ( f ) of the composition [Cp₂ZrCH₂CH₂CH₃]⁺–[Me‐MAO]^– named as the propyl‐separated ion pair. Ion pair ( f ) exhibits distance r[Zr–(MeMAO)] = 3.88 Å and strong C_γ‐agostic interaction of the propyl group with the Zr atom. We suppose this propyl‐separated ion pair ( f ) to be an active center for olefin polymerization.     

Polypropylene and poly(ethylene‐co‐1‐octene) effective synthesis with diamine‐bis(phenolate) complexes: Effect of complex structure on catalyst activity and product microstructure

A series of group 4 metal complexes bearing amine‐bis(phenolate) ligands with the amino side‐arm donor: (μ‐O)[Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)₂ZrCl]₂ ( 1a ), R₂N(CH₂)₂N(CH₂‐2‐O‐3‐R¹‐5‐R²‐C₆H₂)₂TiCl₂ (R = Me, R¹, R² = tBu ( 2a ), R = iPr, R¹, R² = tBu ( 2b ), R = iPr, R¹ = tBu, R² = OMe ( 2c )), and Me₂N(CH₂)₂N(CH₂‐2‐O‐3,5‐tBu₂‐C₆H₂)(CH₂‐2‐O‐C₆H₄)TiCl₂ ( 2d ) are used in ethylene and propylene homopolymerization, and ethylene/1‐octene copolymerization. All complexes, upon their activation with Al(iBu)₃/Ph₃CB(C₆F₅)₄, exhibit reasonable catalytic activity for ethylene homo‐ and copolymerization giving linear polyethylene with high to ultra‐high molecular weight (600·× 10³–3600·× 10³ g/mol). The activity of 1a /Al(iBu)₃/Ph₃CB(C₆F₅)₄ shows a positive comonomer effect, leading to over 400% increase of the polymer yield, while the addition of 1‐octene causes a slight reduction of the activity of the complexes 2a‐2d . The complexes with the NMe₂ donor group ( 2a , 2d , 1a ) display a high ability to incorporate a comonomer (up to 9–22 mol%), and the use of a bulkier donor group, N(iPr)₂ ( 2b , 2c ), results in a lower 1‐octene incorporation. All the produced copolymers reveal a broad chemical composition distribution. In addition, the investigated complexes polymerized propylene with the moderate ( 1a , 2a ) to low ( 2b‐2d ) activity, giving polymers with different microstructures, from purely atactic to isotactically enriched (mmmm = 28%). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2467–2476     

Chiral Salan Aluminium Ethyl Complexes and Their Application in Lactide Polymerization

Synthetic routes to aluminium ethyl complexes supported by chiral tetradentate phenoxyamine (salan‐type) ligands [Al(OC₆H₂(R‐6‐R‐4)CH₂)₂{CH₃N(C₆H₁₀)NCH₃}‐C₂H₅] ( 4 , 7 : R=H; 5 , 8 : R=Cl; 6 , 9 : R=CH₃) are reported. Enantiomerically pure salan ligands 1–3 with (R,R) configurations at their cyclohexane rings afforded the complexes 4 , 5 , and 6 as mixtures of two diastereoisomers ( a and b ). Each diastereoisomer a was, as determined by X‐ray analysis, monomeric with a five‐coordinated aluminium central core in the solid state, adopting a cis‐(O,O) and cis‐(Me,Me) ligand geometry. From the results of variable‐temperature (VT) ¹H NMR in the temperature range of 220–335 K, ¹H–¹H NOESY at 220 K, and diffusion‐ordered spectroscopy (DOSY), it is concluded that each diastereoisomer b is also monomeric with a five‐coordinated aluminium central core. The geometry is intermediate between square pyramidal with a cis‐(O,O), trans‐(Me,Me) ligand disposition and trigonal bipyramidal with a trans‐(O,O) and trans‐(Me,Me) disposition. A slow exchange between these two geometries at 220 K was indicated by ¹H–¹H NOESY NMR. In the presence of propan‐2‐ol as an initiator, enantiomerically pure (R,R) complexes 4 – 6 and their racemic mixtures 7 – 9 were efficient catalysts in the ring‐opening polymerization of lactide (LA). Polylactide materials ranging from isotactically biased (P_m up to 0.66) to medium heterotactic (P_r up to 0.73) were obtained from rac‐lactide, and syndiotactically biased polylactide (P_r up to 0.70) from meso‐lactide. Kinetic studies revealed that the polymerization of (S,S)‐LA in the presence of 4 /propan‐2‐ol had a much higher polymerization rate than (R,R)‐LA polymerization (k_SS/k_RR=10.1).     

Synthesis,molecular structure and stereoisomerization of 2-phosphinyl and 2-phosphonylethyl diorganotin halides

Functionally substituted triorganotin halides V–IX of type R₂Sn(X)(CH₂)₂P(O)PhR′ (R = Me, t-Bu; Rt? = OEt, t-Bu; X = Cl, Br) have been synthesized by halogen cleavage of the corresponding tetraorganotin compounds R₂R²Sn(CH₂)₂P(O)PhR′ (R² = Me or Ph), I–IV. The solid state structure of Me₂Sn (Br) (CH₂)₂P(O)PhBu-t (IX), determined by X-ray diffraction, shows a distorted trigonal-bipyramidal structure at the tin atom, with intramolecular coordination of the PO group. Spectroscopic data are in agreement with such a structure in solution for compounds V–IX. Upon varying the temperature, concentration or solvent in solutions of compounds V–IX a stereoisomerization is observed. On the basis of NMR ¹H, ¹³C, ³¹P, ¹¹⁹Sn), IR and conductivity studies, it is suggested that this stereoisomerization involves a hexacoordinated transition state at the tin atom.     

Reactivity of TpMe2‐Supported Yttrium Alkyl Complexes toward Aromatic N‐Heterocycles: Ring‐Opening or CC Bond Formation Directed by CH Activation

Unusual chemical transformations such as three‐component combination and ring‐opening of N‐heterocycles or formation of a carbon–carbon double bond through multiple C–H activation were observed in the reactions of Tp^Me2‐supported yttrium alkyl complexes with aromatic N‐heterocycles. The scorpionate‐anchored yttrium dialkyl complex [Tp^Me2Y(CH₂Ph)₂(THF)] reacted with 1‐methylimidazole in 1:2 molar ratio to give a rare hexanuclear 24‐membered rare‐earth metallomacrocyclic compound [Tp^Me2Y(μ‐N,C‐Im)(η²‐N,C‐Im)]₆ ( 1 ; Im=1‐methylimidazolyl) through two kinds of C–H activations at the C2‐ and C5‐positions of the imidazole ring. However, [Tp^Me2Y(CH₂Ph)₂(THF)] reacted with two equivalents of 1‐methylbenzimidazole to afford a C–C coupling/ring‐opening/C–C coupling product [Tp^Me2Y{η³‐(N,N,N)‐N(CH₃)C₆H₄NHCH?C(Ph)CN(CH₃)C₆H₄NH}] ( 2 ). Further investigations indicated that [Tp^Me2Y(CH₂Ph)₂(THF)] reacted with benzothiazole in 1:1 or 1:2 molar ratio to produce a C–C coupling/ring‐opening product {(Tp^Me2)Y[μ‐η²:η¹‐SC₆H₄N(CH?CHPh)](THF)}₂ ( 3 ). Moreover, the mixed Tp^Me2/Cp yttrium monoalkyl complex [(Tp^Me2)CpYCH₂Ph(THF)] reacted with two equivalents of 1‐methylimidazole in THF at room temperature to afford a trinuclear yttrium complex [Tp^Me2CpY(μ‐N,C‐Im)]₃ ( 5 ), whereas when the above reaction was carried out at 55 °C for two days, two structurally characterized metal complexes [Tp^Me2Y(Im‐Tp^Me2)] ( 7 ; Im‐Tp^Me2=1‐methyl‐imidazolyl‐Tp^Me2) and [Cp₃Y(HIm)] ( 8 ; HIm=1‐methylimidazole) were obtained in 26 and 17 % isolated yields, respectively, accompanied by some unidentified materials. The formation of 7 reveals an uncommon example of construction of a C?C bond through multiple C–H activations.     

Synthesis,structure, and catalytic activity of new aluminum and titanium complexes based on aminobisphenolate ligands containing bulky substituents

A reaction of aminobisphenols EtN{CH₂[(4-Alk)(6-But)(2-HO)C₆H₂]}₂, Alk = Me (1); Bu^t (2) containing alkyl substituents in the phenol groups with trimethylaluminum and tetra(tert-butoxy)titanium gave two new aluminum derivatives with the Me–Al bond: EtN{CH₂[(2-Alk)-(4-Bu^t)C₆H₂(2-O–)]}2Al–Me, Alk = Me (3); Bu^t (4), and two new titanium derivatives with the Bu^tO–Ti bond: EtN{CH₂[(2-Alk)(4-Bu^t)C₆H₂(2-O–)]}2Ti(O–Bu^t)₂, Alk = Me (5); But (6). The structures of new compounds were confirmed by NMR spectroscopy and elemental analysis. The structures of complexes 3 and 6 were studied by X-ray crystallography. Complexes 3 and 6 are monomeric in the solid phase: a coordination number of Al atom is 4, that of Ti atom is 5, in addition to the M–O bonds the M←N interactions are also present. Complexes 3–6 were studied as initiators of the ring-opening polymerization of ε-caprolactone. The resulting polymers are characterized by relatively high values of number average molecular weight, with the polydispersity being relatively low.     

Formation of Binuclear Zigzag Hexapentaene Titanium Complexes via a Titanacumulene [Ti=C=C=CH2] Intermediate

The reaction of bis(η⁵:η¹‐pentafulvene)titanium complexes with an allylidenephosphorylide Ph₃P=C(H)‐ C(H)=CH₂ leads to binuclear zigzag hexapentaene titanium complexes ( Ti2a , Ti2b ). The formation of the central C₆H₄ unit can be described as a spontaneous double C−H bond activation process, leading to an R₃P=C=C=CH₂ intermediate, as a synthon for a titanabutatriene fragment [(Cp^R)₂Ti=C=C=CH₂] (R: 2‐adamantyl, CH(p‐tol)₂). In a subsequent dimerization Ti2a and Ti2b are formed, proofed by single‐crystal X‐ray diffraction and NMR measurements. The reaction sequence is confirmed by DFT calculations.     

Solution Mediated Synthesis and Structure of the First Anionic Bis‐( hexaborato)‐Zincate Prepared in the Presence of an Organic Amine

A room temperature reaction of zinc acetate, tributyl borate and N, N, N′N′‐tetramethylethylenediamine (tmen) in a mixture of water and 1‐butanol has given rise to a new bis‐(hexaborato)‐zincate, [(Me)₂NH(CH₂)₂NH(Me)₂][{Zn(B₆O₇(OH)₆}₂]·2H₂O ( I ). The structure, determined by single crystal X‐ray diffraction, (P1, a = 8.3014(2), b = 9.2489(2), c = 10.442(2)Å, α = 107.71(3), β = 94.22(3), γ = 100.02(3)°, V = 749.6(3)Å^{3 =} Z = 1, R₁ = 0.0387, wR₂ = 0.105), consists of anionic molecular Zn hexaborate units forming a herringbone arrangement, through strong hydrogen bond interactions, with the amine molecule situated between the chains. Compound I is the first bis‐(hexaborato)‐zincate, to our knowledge, that has been synthesized in the presence of an organic amine.     

Enol ethers and acetals: acylation with dichloroacetyl,acetyl and benzoyl chloride in ionic liquid medium

Synthesis of 4-alkoxy-1,1-dichloro-3-alken-2-ones [CHCl₂C(O)C(R²)C(R¹)-OR, where R, R¹, R² = Et, H, H; Me, Me, H; Et, H, Me; Me, –(CH₂)₂–; Me, –(CH₂)₃–; Et, Et, H; Et, Bu, H; Et, i-Pr, H; Et, i-Bu, H; Me, Ph, H; Me, thien-2-yl, H] from acylation of enol ethers and acetals with dichloroacetyl chloride, in ionic liquid ([BMIM][BF₄] or [BMIM][PF₆]) is reported. The synthesis of alkenones [R³–C(O)C(R²)C(R¹)-OR], where R/R¹/R²/R³ = Et/H/H/Ph, t-Bu/H/H/Ph, Me/-(CH₂)₄/Ph, Me/-(CH₂)₄/Me] from the reaction of enol ethers with benzoyl chloride or acetyl chloride, in ionic liquid [BMIM][BF₄], is also reported. Last products are described for the first time.     

Preparation,characterization and reactivity of Cp2M(PMe3)2 complexes (M = Ti,Zr): the molecular structure of Cp2Zr(PMe3)2

The reduction of Cp₂MCl₂ (M = Ti, Zr) with magnesium in THF in the presence of PMe₃ affords the complexes Cp₂M(PMe₃)₂ in high yields. These compounds lose one or both PMe₃ ligands under very mild conditions. Cp₂Ti(PMe₃)₂ reacts readily with CH₃I, CH₃C(O)Cl, PhSSPh, Me₂PCH₂CH₂PMe₂, CO, RCN (R = Me, t-Bu) or (RN)₂S (R = t-Bu, Me₃Si) to give the corresponding titanocene products. The structure of Cp₂Zr(PMe₃)₂ has been determined by X-ray diffraction; the structural parameters are similar to those of the titanium analog Cp₂Ti(PMe₃)₂ except that the Zr-P and Zr-C distances are longer.     

Molecular Thorium Trihydrido Clusters Stabilized by Cyclopentadienyl Ligands

Hydrogenolysis of alkyl‐substituted cyclopentadienyl (Cp^R) ligated thorium tribenzyl complexes [(Cp^R)Th(p‐CH₂‐C₆H₄‐Me)₃] ( 1 – 6 ) afforded the first examples of molecular thorium trihydrido complexes [(Cp^R)Th(μ‐H)₃]_n (Cp^R=C₅H₂(^tBu)₃ or C₅H₂(SiMe₃)₃, n=5; C₅Me₄SiMe₃, n=6; C₅Me₅, n=7; C₅Me₄H, n=8; 7 – 10 and 12 ) and [(Cp^#)₁₂Th₁₃H₄₀] (Cp^#=C₅H₄SiMe₃; 13 ). The nuclearity of the metal hydride clusters depends on the steric profile of the cyclopentadienyl ligands. The hydrogenolysis intermediate, tetra‐nuclear octahydrido thorium dibenzylidene complex [(Cp^ttt)Th(μ‐H)₂]₄(μ‐p‐CH‐C₆H₄‐Me)₂ (Cp^ttt=C₅H₂(^tBu)₃) ( 11 ) was also isolated. All of the complexes were characterized by NMR spectroscopy and single‐crystal X‐ray analysis. Hydride positions in [(Cp^Me4)Th(μ‐H)₃]₈ (Cp^Me4=C₅Me₄H) were further precisely confirmed by single‐crystal neutron diffraction. DFT calculations strengthen the experimental assignment of the hydride positions in the complexes 7 to 12 .     

Planarity of acetamides,thioacetamides, and selenoacetamides: Crystal structure of N,N‐dimethylselenoacetamide

The planarity of acetamides 1a–3a , thioacetamides 4a–6a , and selenoacetamides 7a–9a , R¹R²NC(=E)CH₃ where E = O, S, Se, and R¹, R² = H or CH₃, was investigated using theoretical calculations at the density functional theory (DFT) level. The calculations showed that the methyl substitution on nitrogen and the change from the amide moiety (NCO) to NCS or NCSe group increased the double bond character of the N C bond. In other words, the planarity of these compounds ( 1a–9a ) increases in the order NH₂ < NHCH₃ < N(CH₃)₂ and O < S < Se. The calculations of bending energy suggest that the planar geometry represents the lowest energy conformation for all compounds investigated in this work. N,N‐Dimethyl‐selenoacetamide ( 9a ), (CH₃)₂NC(Se) CH₃, has the largest bending energy of 10.37 kcal/mol, which suggests that it possesses the greatest planarity among the compounds 1a–9a . However, the solid phase molecular structure of 9a was found to be slightly nonplanar by X‐ray crystallography. The slight nonplanarity observed experimentally is very likely the consequence of intermolecular interactions arising within the crystal packing. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:380–386, 2002; Published online in Wiley Interscience (www.interscience.wiley.com). DOI 10.1002/hc.10056     

Synthese und Charakterisierung von Metallocen-Chelaten heterocyclischer 1,2-Diselenolate

Synthesis and Characterization of Metallocene Chelates of Heterocyclic 1,2-Diselenolates Synthesis and properties of metallocen diselenolates Cp₂^RML (Cp^R = η⁵-C₅H₄CH₃ (Cp′); η⁵-C₅(CH₃)₄ C₂H₅ (Cp^o)) of titanium(IV) and vanadium(IV) with L = dsit (1,3-dithiole-2-thione-4,5-diselenolate), dsise (1,3-dithiole-2-selone-4,5-diselenolate) dsitse (1,3-thiaselenole-2-selone-4,5-diselenolate) and dsis (1,3-diselenole-2-selone-4,5-diselenolate) are described. The structures of these compounds in solution are discussed using ¹H, ¹³C, ⁷⁷Se NMR and EPR data. Their voltammetric behaviour is investigated in dichloromethane. The activation parameters of the chelate ring inversion of the titanocene diselenolates (Cp₂^RTiL) and the x-ray structures of Cp₂′Ti(dsit), Cp₂^oTi(dsit); Cp₂^oTi(dsise) (2 modifications) and Cp₂^oTi(dsis) are reported.