Preconcentration of microamounts of elements in natural waters with 8-mercaptoquinoline and bis(8-quinolyl) disulphide for their atomic-absorption determination

A method has been developed for the group concentration of microamounts of metals (Fe, Co, Ni, Mn, Cu, Zn, Cd, Hg, Pb, Bi, Sb, Mo, W, V, Cr, Ga, In, Sn, Ag, Au, Pd, Pt) in the form of their 8-mercaptoquinolinates co-precipitated on bis(8-quinolyl) disulphide as collector, the latter being an oxidation product of 8-mercaptoquinoline. The collector is formed during the co-precipitation process, which is the reason for its high co-precipitating power. The elements thus concentrated are determined by atomic-absorption spectrometry after dissolution of the precipitate in dilute nitric acid.     

Beiträge zur Ringofenmethodik. XV

Microchimica Acta - Ein Trennungsschema für Cs(I), Ag(I), Ba(II), Zn(II), Cd (II), Mn(II), Pb(II), Cu(II), Ni(II), Co(II), Bi(III), Al(III) und Fe(III) unter Verwendung von Dithiooxamid als...     

Adsorption of metal ions on activated carbon from aqueous solutions at pH 1-13

Adsorption of microgram amounts of 20 metal species on activated carbon powder from aqueous solutions of pH 1-13 was investigated. The species examined were Cs(I), Y(III), Ce(III), Ti(IV), Zr(IV), Cr(III), Cr(VI), Mn(II), Fe(III), Co(II), Ni(II), Ru(III), Cu(II), Ag(I), Zn(II), Cd(II), Al(III), Pb(II), Sb(III) and Bi(III).     

Use of dichloromethane with dithizone as an alternative solvent to carbon tetrachloride restricted by Montreal protocol

The spectral characteristics of dithizone and its metal complexes were measured in dichloromethane as an alternative solvent to carbon tetrachloride which will be illegal to manufacture by the year 2000, according to the revised Montreal Protocol. The extraction equilibria of its metal complexes were also reported and discussed. Dichloromethane was found to enhance the sensitivity of dithizone towards Co(II), Cu(II), Hg(II), Pb(II), Zn(II), Bi(III), Ag(I), In(III) and Tl(I). It was also found to be a better solvent than carbon tetrachloride for the separation of Cd(II) from Zn(II) and for the separation of Co(II) from Ni(II).     

以硫醚为主链的螯合树脂研究——Ⅲ.含硫氰酸根树脂的合成及吸附性能

环硫氯丙烷的均聚物或环硫氯丙烷与环氧氯丙烷的共聚物,在少量二乙烯三胺存在下制得预交联聚合物,将后者与硫氰化钾反应,制得两种侧链带有硫氰酸根的新型螯合树脂。它们对贵金属具有优良的吸附性能和高的吸附选择性。通过X射线光电予能谱初步探讨了树脂对金属离子的螯合作用     

Quantitative separation of lanthanides and scandium from barium,strontium and other elements by cation-exchange chromatography in nitric acid

The lanthanides plus yttrium and scandium are separated from Ba, Sr, Ca, Mg, Pb(II), Bi(III), Zn, Mn(II) and U(VI) by eluting these elements with 2.0 M nitric acid from a column of AG50W-X8 cation exchange resin (200-400 mesh). The lanthanides are retained and can then be eluted with 4 M nitric or hydrochloric acid. Separations are quantitative and applicable to microgram and millimolar amounts of the lanthanides and the other elements. Elements such as Cu(II), Co(II), Ni(II), Cd. Hg(II), T1(I). Ag, Be, Ti(IV) and the alkali metals should accompany barium quantitatively according to their known distribution coefficients. Relevant elution curves and results of analysis of synthetic mixtures are presented.     

Gravimetric determination of copper(II) with p-aminobenzoic acid

A method has been developed for the gravimetric determination of 20-100 mg of copper(II) with p-aminobenzoic acid. Ag, Hg(II), Pb, Al, Fe(II), Bi, Sb(III) and Sn(II) interfere, but Zn, Co(II), Ni and Cd do not. The precipitate can be weighed after drying at 80-100 degrees , or can be ignited to copper(II) oxide at temperatures above 400 degrees , and weighed in this form.     

Fast recovery of Au (III) and Ag(I) via amine-modified zeolitic imidazolate framework-8

In this paper, zeolitic imidazolate framework-8 modified by the ethanediamine (NH₂-ZIF-8) was employed for adsorbing Au (III) and Ag(I) from aqueous solutions. The adsorption capacities of NH₂-ZIF-8 towards Au (III) and Ag(I) were found to be significantly affected by the pH values of the solution. The adsorption kinetics studies show that NH₂-ZIF-8 presents a fast adsorption property towards metals, attaining 93% of adsorption equilibrium uptake for Au (III) within the first 30 min. This phenomenon can be ascribed to the coordination interaction between the amino group and Au (III). The thermodynamic data suggest that the adsorption of NH₂-ZIF-8 towards Au (III) is endothermic process, while that for Ag(I) is exothermic. The maximum adsorption capacities of NH₂-ZIF-8 toward Au (III) and Ag(I) can be achieved to 357 mg·g⁻¹ and 222.25 mg·g⁻¹, respectively. The metal ions interference results show that Cu (II) and Ni (II) hardly have no interference on Au (III) adsorption in e-waste containing 1500 mg·l⁻¹ Cu (II),100 mg·l⁻¹ Ni (II) and 10 mg·l⁻¹ Au (III); while for Ag(I), Cd (II) and Zn (II) have little interference on Ag(I) adsorption in the hybrid solutions containing Ag(I), Ni (II), Cd (II) and Zn (II) with equal concentration (50 mg·l⁻¹), but Ni (II) interference most. The XPS study shows that partial Au (III) was reduced to Au(I), and that Ag(I) was completely reduced to Ag(0) during the adsorption process. The abundant of active sites of NH₂-ZIF-8 containing C=N, N-H, and Zn-OH groups play a key role in the adsorption of Au (III) and Ag(I). In addition, electrostatic interaction can be responsible for the adsorption of Au (III) by NH₂-ZIF-8. The regeneration experiments results show that the adsorption capacities of NH₂-ZIF-8 towards Au (III) and Ag(I) can maintain after three cycles. This work provides a reliable method to improve the adsorption kinetics for metal ions.     

Metal chelate exchange in the organic phase-II Extraction and exchange constants of dithizonates and diethyldithiocarbamates

Dithizonates and diethyldithiocarbamates of Ag, Tl(I), Cu(II), Zn, Cd, Hg(II), Pb, Fe(II), Co(II), Ni, Pd(II), In(III), As(III), Sb(III), Bi, Se(IV) and Te(IV) have been prepared and their reactions in carbon tetrachloride have been studied spectrophotometrically. From the exchange constants determined, the extraction constants of metal diethyldithiocarbamates have been calculated. Where formation of mixed chelates has been observed, corresponding exchange constants have been determined. Finally, the influence of organic solvents (CCl(4), CHCl(3), C(6)H(6) and C(6)H(5)Cl) on the exchange reaction of zinc diethyldithiocarbamate with dithizone has been investigated.     

Investigations on the usefulness of tiron in separation of metal ions on the macroporous anion-exchanger amberlyst A-26

The possibility of application of a sulpho-derivative of an aromatic organic complexing agent-tiron-for separation of cations on the macroporous anion-exchanger Amberlyst A-26 has been investigated. Comparative results obtained with Amberlite IRA 400 have proved the macroporous exchanger to be the more useful. The dependence of retention on pH obtained has been established by the batch method for: Ag, Ni, Co(II), Mn(II), Zn, Cd, Pb, Cr(III), Fe(III), Ga, Al, In, Bi, Ti(IV), V(V) By taking advantage of selectivity differences, the following mixtures have been separated: AlGa, AlTi(IV), Ti(IV)Ni, NiFe(III), NiFe(III)Ti(IV).     

A fast and precise heterometric determination of thallium(I) with sodium tetraphenylborate

The heterometric titration of thallium(I) with sodium tetraphenylborate, at various pH values and in the presence of salts and different complexing agents, was studied; 1.5–0.75 mg of thallium(I) could be determined within 3–4 min, and the error was negligible. Of the complexing agents studied, sodium pyro- and tripolyphosphate had a specific influence, raising the sensitivity about 4-fold, and no interference was caused by the presence of 30–130-fold molar excesses of the following metals: Ca, Mg, Zn, Mn, Co, Ni, Fe(III), Al, UO₂(II), Cd, Cu(II), Pb, Bi(III), Ag, V(V), Mo(VI) W(VI) and Th. Pd, Au(III) and Pt(IV) did not interfere.     

Metal chelate exchange in the organic phase-III Extraction and exchange constants of dithizonates and oxinates

Reactions between dithizonates and oxinates of Ag, Tl(I), Cu(II), Zn, Cd, Hg(II), Pb, Co(II), Ni, Pd, In, Ga and Bi in chloroform have been studied spectrophotometrically. From the exchange constants determined, the extraction constants of metal dithizonates or metal oxinates have been calculated. By this method extraction constants of many metal chelates can be calculated which are difficult to determine by studies of distribution between aqueous and chloroform phases.     

Solid phase extractors derived by functionalising sub-micro silica gel with chelating agents and their pH-tunable adsorbing capability towards Pb(II) and Ag(I)

Three novel solid phase extraction agents were developed by functionalising sub-micron sized silica gel with organic functional moieties possessing {SN}-ligating atoms. The extractors were characterised by FTIR and TGA. Their capability of adsorbing the ions Fe(III), Cu(II), Zn(II), Cd(II), Cr(VI), Hg(II), Pb(II), Co(II), Ni(II), and Ag(I) is described. The extractors show pH-tunable selectivity for Ag(I) and/or Pb(II). By adjusting the pH to 5 or 6, high affinity is found for both Ag(I) and Pb(II), with little or no interference by the other metal ions. At pH values of <2, the extractors become highly selective for Ag(I), with an adsorption capacity of 35 mg g^?1. Little mechanical stirring is required due to the size of the particles. The recovery rates for both Ag(I) and Pb(II) were better 90% even after five repetitive adsorption-desorption cycles.     

Formation and composition of the precipitates of various metal 8-selenoquinoline complexes

The effect of acidity on the precipitation of various bivalent metal 8-selenoquinoline and 8-mercaptoquinoline complexes has been systematically studied and compared. The metal ions were Zn(2+), Cd(2+), Pb(2+), Mn2+, Ni(2+), Cu(2+) and Co(2+). Most of the metal ions, except copper(II) and cobalt(II), precipitate as a. 1:2 complex, metal :ligand. However, in hydrochloric acid solution cadmium precipitates as CdR(2).2HCl and lead as PbR(2).2HCl or PbR.Cl. Copper(II) is reduced to copper(I) and precipitates as CuR.RH at pH above 2.0 and as CuR in strongly acidic solution. Cobalt(II) does not give a precipitate of composition but appears to precipitate as a mixture of CoR(2).RH and fixed CoR(2) or as other complexes. The reasons for the formation of the various types of precipitate are considered.     

Thermogravimetric analysis of some metal thiocarbonates and sulphides obtained with potassium thiocarbonate (PTC) reagent

The thiocarbonates of K(I), Tl(I), Pb(II), Cd(II), Cu(II), Co(II), Ni(II), Zn(II), Fe(II) and the sulphides of Ag(I), Cu(II), Cd(II), Hg(II), Bi(III), Mo(VI), Pt(IV), Au(III), V(V), Se(IV), Te(IV), As(III, V), Sb(III) have been studied by thermogravimetric analysis. These studies not only confirm the purity of the precipitated products obtained with PTC but also determine correct temperature ranges for the precipitates to attain constant weight, thereby affording gravimetric evaluations of even mg quantities of the metal ions studied. Purity of precipitated products was made possible with the technique of precipitation from homogeneous solution based on the PTC reagent as precipitant.     

Studies on tetrachlorodithizone isomers and their applications to the extraction of metal ions

Six isomeric tetrachlorodithizones were synthesized and their electronic and i.r. spectra were measured. Their acid dissociation constants and partition coefficients between 0.5 M NaClO₄ solution and carbon tetrachloride are reported. Their extraction equilibria with Cd(II). Co(II), Cu(II), Hg(II), Ni(II), Pb(II), Tl(I), Zn(II) and Bi(III) and the spectrophotometric characteristics of the complexes formed are described. The 3,3',4,4'-tetrachloro isomer is spectrophotometrically more sensitive than dithizone for Zn, Pb, Hg(II) and Bi(III) whereas the 2,2',3,3'- and 2,2',5,5'-isomers are more sensitive for copper ions. For most of the metals tested, the tetrachlorodithizones allowed quantitative extraction at lower pH than is possible with dithizone.     

Rational ligand design for metal ion recognition. Synthesis of a N-benzylated N2S3-donor macrocycle for enhanced silver(I) discrimination

Four previously documented ligand design strategies for achieving Ag(I) discrimination have been applied to the design of a new N-benzylated N2S3-donor macrocycle; the latter shows high selectivity for Ag(I) over Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) in log K and bulk membrane transport studies.     

A highly selective and sensitive method for identification of gold

Summary A highly sensitive method for detection of gold, almost free from interferences, is described. The reaction is performed on a short column of anion-exchange resin Dowex 1 X8 (100–200 mesh) in iodide form. To the test solution containing 0.13g/ml of gold(III) is added Sb-solution (weight ratio Au: Sb=1 200) and the mixture is then passed through the resin, followed by 1N NaOH. A crimson colour appearing within 2–3 min indicate gold. Many metal ions, including Pt-metals, Tl(I), Tl(III), Ir(IV), In (III), Ga(III), Cu(II), Cd(II), Zn(II), Pb(II), Fe(III), Mn(II), Co(II), Ni(II), Hg(II), As(III) do not interfere. In the presence of 50-fold excess of Ag(I) or Bi(III) there is no colour because of the formation of a precipitate on the resin.

---

Zusammenfassung Ein hochempfindliches und selektives Verfahren zum qualitativen Gold-nachweis wurde vorgeschlagen. Die Reaktion wird in einer 10 mm hohen Anionenaustauschersäule Dowex 1 X8 in Jodidform durchgeführt. Zu der aufgetragenen Probelösung fügt man Sb(III) und (V) (im Verhältnis Au: Sb= 1 200) und versetzt nachher auf der Säule mit 1-n NaOH. Nach einigen Minuten entsteht um die Harzkörner eine himbeerrote Färbung. Pt-Metalle, Tl(I), Tl(III), Ir(IV), In(III), Ga(III), Cu(II), Cd(II), Zn(II), Pb(II), Fe(III), Mn(II), Co(II), Ni(II), Hg(II), As(III) stören nicht; Ag(I) und Bi(III) stören gleichfalls nicht, solange sie in nicht mehr als 50facher Menge neben Gold vorliegen. Bei höheren Konzentrationen setzen sie sich als unlösliche Jodide um die Harzkörner ab und stören. Die Nachweisgrenze der Reaktion liegt bei 0,13g/ml.

     

Flow Analysis of Transition Metals by Thermal Lensing

The conditions for the flow determination of Al(III), Bi(III), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Mn(II), Nd(III), Ni(II), Pb(II), Pr(III), and Zn(II) by reaction with Xylenol Orange in aqueous solutions at pH 4.5 and the determination of Cd(II), Co(II), Cu(II), Fe(II), Ni(II), Pb(II), and Zn(II) by reaction with 4-(2-thiazolylazo)resorcinol in water–ethanol mixtures (5 : 1) at pH 5.0 using an injected sample volume of 80 L were proposed. The limits of detection were n × 10^–8–n × 10^–7 mol/L; the linearity ranges in the calibration graphs were of about three orders of magnitude; the relative standard deviation was of 3–7%.     

Chloroform extraction of ethyl xanthate complexes from sulphuric acid media

The chloroform extraction of 30 elements (Fe, Co, Ni, Zn, Cd, Ge, Sn, V, As, Sb, Bi, Cu, Ag, Au, Mn, Re, Ga, In, Tl, Se, Te, Cr, Mo, U, Pt, Pd, Rh, Ir, Ru and Ce) from 0.1-8M sulphuric acid in the presence of potassium ethyl xanthate has been studied. Pd(II), Bi, As(III), Sb(III), Se(IV) and Te(IV) are completely extracted and Au(III) is largely extracted over the range of acid concentration investigated. Fe(II), Tl(I), Rh(III) and Cr(VI) are only slightly extracted and Se(VI), Te(VI), Ru(III), Cr(III), Mn(II), Zn, Ce(IV), Ir(IV) and Ge(IV) are not extracted at all. Depending on the acid concentration, the remaining elements are all partly extracted. Results are compared with those obtained in an earlier study of the extraction of xanthate complexes from hydrochloric acid media. The processes involved in the formation of some xanthate complexes and potential analytical separations are discussed.