Simultaneous Spectrophotometric Determination of Zinc and Nickel in Water Samples by Mean Centering of Ratio Kinetic Profiles

The mean centering of ratio kinetic profiles method was used for the simultaneous determination of binary mixtures of Ni(II) and Zn(II) in water samples, without prior separation steps. The method is based on the difference in the rate of the reaction of Ni(II) and Zn(II) with xylenol orange at pH 5.3. The method allows rapid and accurate determination of Ni(II) and Zn(II). The analytical characteristics of the methods for the simultaneous determination of binary mixtures of Ni(II) and Zn(II) were calculated. The linear range was 0.025‐2.400 μg mL^?1 and 0.025‐2.20 μg mL^?1 for Zn(II) and Ni(II), respectively. Interference effects of common anions and cations were studied, and the method was successfully applied to the simultaneous determination of Zn(II) and Ni(II) in water samples.     

Determination of trace amounts of nickel, manganese, cobalt, and zinc in environmental samples after separation and preconcentration by use of polyacrylic acid/alumina sorbent

Manganese, nickel, cobalt, and zinc are elements that appear together in many real samples. In this work, a simple, rapid, and sensitive method has been used for the simultaneous separation and preconcentration of trace amounts of these elements using water-soluble polyacrylic acid on alumina as a sorbent in a glass column system. A solution containing Mn, Ni, Co, and Zn was passed through the column at pH 7, and desorption was carried with 5.0 mL of 0.03 M nitric acid. Linearity was maintained between 0.25-5.0 x 10(3), 0.04-6.0 x 10(3), 0.10-8.0 x 10(3), and 0.028-1.0 x 10(3) ng/mL for Ni, Mn, Co, and Zn, respectively, in the original solution. Eight replicate determinations of a mixture containing 1.0 microg/mL of each of the elements in the final solution gave relative standard deviations of 1.4, 1.5, 2.4, and 1.2% for Ni, Mn, Co, and Zn, respectively. The sorption capacities for Mn (mg/g sorbent) obtained were 16.0 for Mn, 9.0 for Ni, 12.0 for Co, and 10.0 for Zn. By using 5.0 mL elution solution, preconcentration factors of 400, 500, 700, and 460 could be obtained for Ni, Mn, Zn, and Co, respectively.     

Determination of Cd, Co, Cu, Mn, Ni, Pb, and Zn by Inductively Coupled Plasma Mass Spectroscopy or Flame Atomic Absorption Spectrometry after On-line Preconcentration and Solvent Extraction by Flow Injection System

The concentrations of Cd, Co, Cu, Mn, Ni, Pb, and Zn in natural and sea waters are too low to be directly determined with by flame atomic absorption spectrometry (FAAS) or graphite furnace atomic absorption spectrometry (GFAAS). Specific sample preparations are requested that make possible the determination of these analytes by preconcentration or extraction. These techniques are affected by severe problems of sample contamination. In this work Cd, Co, Cu, Mn, Ni, Pb, and Zn were determined by inductively coupled plasma mass spectroscopy (ICP-MS) or by atomic absorption spectrometry, in fresh and seawater samples, after on-line preconcentration and following solvent elution with a flow injection system. Bonded silica with octadecyl functional group C₁₈, packed in a microcolumn of 100-μl capacity, was used to collect diethyldithiocarbamate complexes of the heavy metals in aqueous solutions. The metals are complexed with a chelating agent, adsorbed on the C₁₈column, and eluted with methanol directly in the flow injection system. The methanolic stream can be addressed to FAAS for direct determination of Cu, Ni, and Zn, or collected in a vial for successive analysis by GFAAS. The eluted samples can be also dried in a vacuum container and restored to a little volume with concentrated HNO₃and Milli-Q water for analysis by ICP-MS or GFAAS.     

一种高选择性固相萃取剂的合成及对汞(Ⅱ)的分离富集特性

制备了二甲酚橙键合硅胶(SGMXO)固相萃取剂,研究了它对常见重金属离子的分离富集行为,发现对水中痕量Hg2 有较好的选择性分离富集效果。系统考察了溶液的pH、过柱流速、洗脱液浓度及流速、柱始漏量及不同金属离子对Hg2 的定量回收的影响。在pH=1.0条件下,可在Cd2 、Pb2 、Cu2 、Mn2 等多种性质相近的金属离子存在时,对Hg2 进行选择性分离富集。所合成的固相萃取剂在使用50次后仍能重复出实验现象。该法用于对实际样品中Hg2 的分离富集,回收率在99%以上。     

The Use of Zirconyl Xylenol Orange for the Post-Column Spectroscopic Detection of Fluoride in Ion Chromatrography

Abstract

A simple post column reaction detection system for fluoride is presented using the decolorization of the zirconyl xylenol orange complex. A 3[sgrave] detection limit of 0.05 μg F^? mL^?1 was achieved with a linear calibration function up to 10 μg F^? mL^?1. The methodology is suitable for the determination of F^? in potable water and some interferences studies were conducted with common cations namely Ca, Mg, Al and Fe(III).     

Distribution of Minor and Trace Metals in Carezza Lake (ANTARCTICA) Ecosystem

Abstract

This paper reports the distribution of a series of metals in natural samples collected at Carezza Lake in Antarctica, during the Italian Expedition in the austral summer 1989/90. The considered elements are: water, sediments and soil sampled from the surroundings of the lake and algae. The determination of the total concentration of the following metals was performed: Al, As, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Na, Ni, Pb, Zn. In addition, for sediment and soil samples, a speciation study was performed for some metals, namely Cd, Co, Cr, Cu, Fe, Mn, Ni, Zn, using the Tessier procedure.     

Extraction-flame atomic absorption determination of microtraces of copper, zinc, nickel, cobalt, manganese and iron in some alkali salts

Summary The microtrace content of Cu, Zn, Ni, Co, Mn and Fe in NaClO₄, KCl, KOH and KAl(SO₄)₂ · 12 H₂O is determined by flame atomic absorption spectrometry after preceding preconcentration of the traces using the extraction system PMBP/MIBK. It is proved that the salt matrix does not affect the quantitative extraction of the traces. The method permits the determination of the traces in the concentration range of 10^–3–10^–6% with good precision (variation coefficient 2–8%) and accuracy.

---

Extraktions-Flammenatomabsorptions-Bestimmung von Mikrospuren von Cu, Zn, Ni, Co, Mn und Fe in Alkali-Salzen

Zusammenfassung Der Mikrospurengehalt von Cu, Zn, Ni, Co, Mn und Fe in NaClO₄, KCl, KOH, und KAl(SO₄)₂ · 12H₂O wurde durch Flammenatomabsorption nach Extraktionsanreicherung mit einer 1-Phenyl-3-methyl-4-benzoylpyrazolon-5 (PMBP)-Lösung in MIBK bestimmt. Die Salz-Matrix weist keinen störenden Einflu\ auf die quantitative Extraktion der Elementspuren auf. Die Bestimmung der Spuren im Konzentrationsgebiet von 10^–3–10^–6% erfolgt mit guter PrÄzision (Variationskoeffizient 2–8%) und Richtigkeit.

     

Certification of the contents of some heavy metals (Cd, Co, Cu, Mn, Hg, Ni, Pb and Zn) in three types of sewage sludge

Summary The element contents of Cd, Co, Cu, Mn, Hg, Ni, Pb and Zn of three different types of sewage sludge were certified. The preparation, the homogeneity and the stability are reported. The certified contents as well as values for Cr and Se and for the aqua regia soluble contents of Cd, Cr, Co, Cu, Mn, Ni, Pb and Zn are given.

---

Zertifizierung von Schwermetallspuren (Cd, Co, Cu, Mn, Hg, Ni, Pb und Zn) in drei Klärschlammproben

Zusammenfassung In drei verschiedenen Klärschlammproben wurden die Elementgehalte an Cd, Co, Cu, Mn, Hg, Ni, Pb und Zn zertifiziert. Es wird berichtet über die Herstellung, Homogenität und Stabilität. Die zertifizierten Gehalte sowie der Gehalt von Cr, Se und der Gehalt an königswasserlöslichem Cd, Cr, Co, Cu, Mn, Ni, Pb und Zn werden angegeben.

     

AAS determination of Co, Ni, Mn and Cr in ores, concentrates and dusts from copper metallurgy after matrix elements separation by extraction

Summary A method has been developed for the AAS determination of Co, Ni, Mn and Cr in ores, concentrates and dusts of copper metallurgy at the 10^–3–10^–1% level. The matrix elements (Cu, Pb, Zn, Fe) were separated in a two-stage extraction: with MIBK from 6 M HCl solution and with 0.1 M tetrahexylammonium iodide (THAI) in MIBK from 3 M HCl, in form of ion-pairs, without Co, Ni, Mn and Cr losses. Values of r.s.d. were 2.0–6.0%.

---

AAS-Bestimmung von Co, Ni, Mn und Cr in Erzen, Konzentraten und Stäuben aus dem Bereich der Kupfermetallurgie nach Abtrennung der Matrixelemente durch Extraction

Zusammenfassung Das beschriebene Verfahren eignet sich für den Bereich von 10^–3 bis 10^–1%. Die Matrixelemente (Cu, Pb, Zn, Fe) wurden als Ionenpaare ohne Verluste an Co, Ni, Mn und Cr mit Hilfe einer zweistufigen Extraktion abgetrennt: mit MIBK aus 6 M HCl-Lösung und mit 0,1 M Tetrahexylammoniumiodid (THAI) in MIBK aus 3 M HCl-Lösung. Die relativen Stadardabweichungen lagen im Bereich von 2,0 bis 6,0%.

     

Several modified piezoelectric quartz crystals for determination of omethoate

A chromatographic method for the determination of transition metals in human hair samples is described. The method involves the separation of Cu, Pb, Zn, Ni, Co, Cd and Mn in a C18 column coated with sodium hexadecane-sulfonate (SHS) and spectrophotometric detection (520 nm) after post-column reaction of the eluted metals with 4-(2-pyridylazo)-resorcinol (PAR). The eluent was a 100 mM tartrate solution adjusted to pH 3.1 with a 2 M sodium hydroxide solution (flow-rate=1.0 ml min(-1)). A good separation of the eluted metals (specially for Cu/Pb and Zn/Ni) has been achieved. The detection limits, expressed as mug l(-1), were 2.2 (Cu), 8.0 (Pb), 2.8 (Zn), 1.5 (Ni), 1.5 (Co), 12.0 (Cd), and 1.4 (Mn). A microwave-assisted closed vessel acid digestion procedure with HNO(3)+HClO(4) (4+1 ml) was used for the hair samples solubilisation. Nineteen hair samples were analysed with the proposed method. The results were in good agreement with those obtained by atomic absorption spectrometry (AAS).     

Application of High Performance Liquid Chromatography to the Analysis of Nuclear Materials

Abstract

A small-particle (13 μm) styrene-divinylbenzene cation-exchange resin has been used for the separation and determination of trace metals in nuclear materials such as steels, Ni-Cr-Fe alloys, zirconium, and uranium. The eluted metal ions, which included Mn, Fe, Co, Ni, Cu, Zn and Pb, were monitored with a variable wavelength detector after a post-column reaction with 4-(2-pyridylazo)-resorcinol. The metal ions were determined at 10^?4 to 1% (w/w) levels by direct injection of solutions of the materials. Interference from uranium, due to the reaction between uranium and the reagent used for detection, was removed either with a masking agent or by a coupled-column technique.     

Syntheses,spectroscopic, and magnetic properties of polystyrene-anchored coordination compounds of tridentate ONO donor Schiff base

The crosslinked chloromethylated polystyrene (PSCH₂–Cl) reacts with the Schiff base, derived from condensation of PSCH₂–Cl with 3-formylsalicylic acid and salicylhydrazide to form a polystyrene-anchored Schiff base, PSCH₂–LH₃ (1). Compound 1 reacts with a number of metal ions to form polystyrene-anchored coordination compounds, PSCH₂–LHM?·?DMF (where M?=?Cu, Zn, Cd, UO₂, and MoO₂), PSCH₂–LHM′?·?3DMF (where M′?=?Mn, Co, and Ni), PSCH₂–LHFeCl?·?2DMF, and PSCH₂–LHZr(OH)₂?·?2DMF. The polystyrene-anchored coordination compounds have been characterized by elemental analyses, spectra (infrared, reflectance, and electron spin resonance) and magnetic susceptibility measurements. The polystyrene-anchored compounds are magnetically dilute. Shifts in band positions of the groups involved in coordination have been utilized to find tridentate ONO donor behavior of 1. The polystyrene-anchored Zn(II), Cd(II), Zr(IV), MoO₂(VI), and UO₂(VI) compounds are diamagnetic, while Mn(II), Co(II), Ni(II), Cu(II), and Fe(III) compounds are paramagnetic. The polystyrene-anchored Cu(II) compound is square planar; Zn(II) and Cd(II) compounds are tetrahedral; Co(II), Ni(II), Mn(II), Fe(III), MoO₂(VI), and UO₂(VI) compounds are octahedral; and Zr(IV) compound is pentagonal bipyramidal.     

Study of Matrix Effects on Determination of Trace Elements in Aluminum,Using Inductively Coupled Plasma Atomic Emission Spectrometry, 1) Selection of Spectral Lines.

Abstract

The effect of an aluminum matrix on the determination of B, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Si and Zn was studied. These elements are expected to be present in high purity Al base materials. 45 spectral lines of these elements were scanned in a spectral window of 60 pm. Background equivalent concentrations were calculated and compared with existing data. Interference free spectral lines, one for each element, have been recommended to be used for analysis. Depression effects due to the Al matrix were calculated at the selected lines.     

Certification of the contents of some heavy metals (Cd, Cu, Hg, Ni, Pb and Zn) in three types of soils

Summary The element contents of Cd, Cu, Hg, Ni, Pb and Zn of three types of soil were certified. The preparation, homogeneity and stability are reported. The certified contents as well as values for Co, Cr, Mn and Se and for the aqua regia soluble contents Cd, Cr, Cu, Mn, Ni, Pb and Zn are given.

---

Zertifizierung von Schwermetallspuren (Cd, Cu, Hg, Ni, Pb und Zn) in drei Bodenproben

Zusammenfassung In drei verschiedenen Bodenproben wurden die Elementgehalte an Cd, Cu, Hg, Ni, Pb und Zn zertifiziert. Es wird berichtet über die Bereitung, Homogenität und Stabilität. Die zertifizierten Gehalte sowie der Gehalt an Cr, Co, Mn und Se und der Gehalt an königswasserlöslichem Cd, Cr, Cu, Mn, Ni, Pb und Zn werden angegeben.

     

New complexes of some d-electron elements with 3-methyladipic acid

Conditions for the preparation of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) 3-methyladipates were investigated and their qualitative composition and magnetic moments were determined. The IR spectra and powder diffraction patterns of the complexes prepared of the general formula M(C₇H₁₀O₄)·nH₂O (n=0-11) were recorded and their thermal decomposition in air were studied. During heating the hydrated complexes are dehydrated in one (Co, Ni) or two steps (Mn, Zn) losing all crystallization water molecules (Co, Ni) or some water molecules (Mn, Zn) and then anhydrous (Co, Ni, Cu) or hydrated complexes (Mn, Zn) decompose directly to oxides (Mn, Co, Zn) or with intermediate formation the mixture of M+MO (Ni, Cu). The carboxylate groups are bidentate (Mn, Co, Ni, Cu) or monodentate (Zn). The complexes exist as polymers. The magnetic moments for the paramagnetic complexes of Mn(II), Co(II), Ni(II) and Cu(II) attain values 5.48, 4.49, 2.84 and 1.45 B.M., respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of microtraces of Bi, Co, Cu, Fe, Mn, In, Ni, Pb, Sb and Zn in phosphoric acid and ammonium phosphate

Summary Methods for the determination of Bi, Co, Cu, Fe, Mn, In, Ni, Pb, Sb and Zn in phosphoric acid by ETA-AAS using the platform technique were developed. The detection limits are in the range of 1 to 30 ppb for conc. H₃PO₄. Relative standard deviations of 5–10% at 10 times the detection limits were achieved. The results obtained by five different atomic spectroscopic methods are in good agreement (direct Zeeman-ETA-AAS, D₂-ETA-AAS and FAAS; OES and FAAS after trace extraction).     

Nanometer-sized zirconium dioxide microcolumn separation/preconcentration of trace metals and their determination by ICP-OES in environmental and biological samples

A new method is proposed using a microcolumn (20 mm × 2.0 mm) packed with nanometer-sized zirconia as solid-phase extractor for the separation/preconcentration of Mn, Cu, Cr, Zn, Ni and Co prior to their determination by inductively coupled plasma optical emission spectrometer (ICP-OES) in environmental samples. The factors affecting the separation and preconcentration of analytes such as pH, sample flow rate and volume, eluent concentration and volume were determined, interfering ions were studied, and the optimal experimental conditions were established. The adsorption capacity of nanometer-sized ZrO₂ for Mn, Cu, Cr, Zn, Ni and Co was found to be 1.3, 1.3, 1.7, 2.0, 3.9 and 1.5 mg g⁻¹, respectively. The detection limits of the method were 12, 58, 24, 2, 7 and 36 ng L⁻¹, respectively, with a preconcentration factor of 25. The precision of this method was 1.7% (Mn), 2.9% (Cu), 5.9% (Mn), 3.8% (Mn), 6.2% (Mn) and 4.3% (Mn) with 9 determinations of 10 ng mL⁻¹ of target analytes, respectively. The method was successfully applied to the determination of trace metals in lake water, dried fish samples, certified reference materials of human hair and milk, and provided satisfactory results.     

一种具有二甲酚橙基团的新螯合形成树脂及其应用

本文介绍了一种用二甲酚橙(XO)溶液与强碱性阴离子树脂以简便的搅拌方式,制得具有XO基团的新螯合形成树脂的方法。研究了XO树脂的一些性能以及对重全属离子的吸着和洗脱,并用原子吸收测定天然水中Cu、Zn、Cd、Fe元素。同时试验了干扰影响。     

Spectral,thermal and magnetic investigations of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) 4-methylphthalates

Conditions for the preparation of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) 4-methylphthalates were investigated and their composition, solubility in water at 295 K and magnetic moments were determined. IR spectra and powder diffraction patterns of the complexes prepared with molar ratio of metal to organic ligand of 1.0:1.0 and general formula: M [ CH₃C₆H₃(CO₂)₂]·nH₂o (n=1-3) were recorded and their decomposition in air were studied. During heating the hydrated complexes are dehydrated in one (Mn, Co, Ni, Zn, Cd) or two steps (Cu) and next the anhydrous complexes decompose to oxides directly (Cu, Zn), with intermediate formation of carbonates (Mn, Cd), oxocarbonates (Ni) or carbonate and free metal (Co). The carboxylate groups in the complexes studied are mono- and bidentate (Co, Ni), bidentate chelating and bridging (Zn) or bidentate chelating (Mn, Cu, Cd). The magnetic moments for paramagnetic complexes of Mn(II), Co(II), Ni(II) and Cu(II) attain values 5.92, 5.05, 3.36 and 1.96 M.B., respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and complexation of 1,4,7-oxadithiononane-5,6-dionedioxime

A new vic-dioxime 1,4,7-oxadithiononane-5,6-dionedioxime (H₂L) was prepared from reaction of 2,2-oxydiethanthiol with dichloroglyoxime. Mononuclear complexes of H₂L with Ni(II), Co(II), Cu(II), Zn(II), and Cd(II) were also prepared and their structures were determined by means of ¹H?NMR, ¹³C?NMR, IR, and mass spectroscopy. Ni(II), Co(II), and Cu(II) form square planar complexes of 1?:?2 molar ratio of metal to ligand through N,N-chelation, while Zn(II) and Cd(II) form 1?:?1 tetrahedral complexes with a N,O-chelation.