Determination of Lead and Nickel in Saudi Arabian Crude Oils by ICP/MS Using MIBK for Sample Pretreatment

Abstract

Inductively coupled plasma/mass spectrometer (ICP/MS) has been used for the determination of lead and nickel in different Saudi Arabian crude oils. MIBK-nitric acid extraction system is used for sample pretreatment and compared to previously investigated sampling techniques.     

Speciation of Arsenic Compounds in the Urine of Rats Orally Exposed to Dimethylarsinic Acid Ion Chromatography with ICP–MS as an Element-Selective Detector

A combined ion chromatography (IC) with inductively coupled plasma mass spectrometry (ICP—MS) system as an element-selective detector has been used for the determination of arsenic compounds. Seven arsenic compounds were separated by cation-exchange chromatography. Subsequently, the separated arsenic compounds were directly introduced into the ICP—MS and were detected at m/z =75. Detection limits for the seven arsenic compounds ranged from 0.8 to 3.8 μg As/l. The IC–ICP–MS system was applied to the determination of arsenic compounds in the urine of dimethylarsinic acid (DMAA)-exposed rats. DMAA was the most abundant arsenic compound detected. Arsenous acid, monomethylarsonic acid and trimethylarsine oxide were also detected.     

Determination of admixtures of high-melting metals in rare-earth metals and their compounds

The study considers the possibility of using inductively coupled plasma mass spectrometry (ICP MS) for the determination of admixtures of Zr, Nb, Mo, Hf, Ta, W, and Te in rare-earth metals and their compounds using preliminary extraction or extraction-chromatographic preconcentration. The admixture elements have been separated by extraction with trioctylphosphine oxide in dichloroethane from hydrochloric acid media and back extraction with oxalic acid. Chemical separation provided a 1–4-order reduction of the lower quantification limit for these elements using ICP MS.     

Characterization and screening of metals,metalloids and biomarkers in crude oil by ICP–MS/OES,and GC–MS techniques after digestion by microwave‐induced combustion

A method for digestion of light and medium Iraqi crude oils (Basrah and Khanaken oils) using microwave‐induced combustion (MIC) in closed vessels is described for the determination of Hg, Au, Cu, Al, Ca, Co, K, Mg, Si and Sr by inductively coupled plasma optical emission spectrometry (ICP–OES) and Mo, Ti, Mn, Li, Se^?1, Rb, Ag, Ba, Pb, As, Cd, Cr, Fe, Ni, V and Zn by inductively coupled plasma mass spectrometry (ICP–MS). Upon using MIC it was possible to obtain lower limits of detection by ICP–MS and also by ICP–OES compared with those obtained by microwave‐assisted digestion. The MIC was the best choice with regard to the possibility of using dilute nitric acid as an absorbing solution, which is important to minimize the interference encountered by ICP–MS and ICP–OES.The physicochemical parameters and some contaminants of crude oil samples were analyzed to classify and assess the quality of the crude oils. This study determines the viability of the use of Fourier transform infrared spectroscopy as an alternativee to traditional petroleum geochemical methods for crude oil characterization. The infrared fingerprints agree with the results obtained from GC–MS analysis.     

Simultaneous Determination of Trace Metals in Saudi Arabian Crude Oil Products by Inductively Coupled Plasma Mass Spectrometry (Icp/Ms)

Abstract

The inductively coupled plasma in combination with a mass spectrometer (ICP/MS) has been used for the determination of metals in different Saudi Arabian crude oils (Arab Berri, Arab heavy, Arab medium and Arab light). A previously investigated extraction method has been applied in the determination of metals in oil to the sub ppm level.     

An evaluation of analytical techniques for determination of lead, cadmium, chromium, and mercury in food-packaging materials

Closed microwave digestion and a high-pressure asher have been evaluated for wet-oxidation and extraction of lead, cadmium, chromium, and mercury from a range of typical packaging materials used for food products. For the high-pressure asher a combination of nitric and sulfuric acids was efficient for destruction of a range of packaging materials; for polystyrene, however, nitric acid alone was more efficient. For microwave digestion, a reagent containing nitric acid, sulfuric acid, and hydrogen peroxide was used for all materials except polystyrene. Use of the high-pressure asher resulted in the highest recoveries of spiked lead (median 92%), cadmium (median 92%), chromium (median 97%), and mercury (median 83%). All samples were spiked before digestion with 40 μg L^–1 Cd, Cr, and Pb and 8 μg L^–1 Hg in solution. The use of indium as internal standard improved the accuracy of results from both ICP–MS and ICP–AES. Average recovery of the four elements from spiked packaging materials was 92 ± 14% by ICP–MS and 87 ± 15% (except for mercury) by ICP– AES. For mercury analysis by CVAAS, use of tin(II) chloride as reducing agent resulted in considerably better accuracy than use of sodium borohydride reagent.     

Ion chromatography–inductively coupled plasma mass spectrometry determination of arsenic species in marine samples

Arsenic speciation analysis in marine samples was performed using ion chromatography (IC) with inductively coupled plasma mass spectrometry (ICP‐MS) detection. The separation of eight arsenic species, viz. arsenite, monomethyl arsonic acid, dimethylarsinic acid, arsenate, arsenobetaine, tetramethylarsine oxide, arsenocholine and tetramethylarsonium ion was achieved on a Dionex AS4A (weaker anion exchange column) by using a nitric acid pH gradient eluent (pH 3.3 to 1.3). The entire separation was accomplished in 12 min. The detection limits for the eight arsenic species by IC–ICP‐MS were in the range 0.03–1.6 µ g l^?1, based on 3σ of the blank response (n = 6). The repeatability and day‐to‐day reproducibility were calculated to be less than 10% (residual standard deviation) for all eight species. The method was validated by analyzing a certified reference material (DORM‐2, dogfish muscle) and then successfully applied to several marine samples, e.g. oyster, fish muscle, shrimp and marine algae. The low power microwave digestion was employed for the extraction of arsenic from seafood products. Copyright © 2004 John Wiley & Sons, Ltd.     

Analytical atomic spectroscopy using ion trap devices

Investigations using ion trap devices for analytical atomic spectroscopy purposes have focused on the use of an inductively coupled plasma (ICP) ion source with ion trap mass spectrometric (ITMS) detection. Initial studies were conducted with an instrument assembled by simply appending an ion trap as the detector to a fairly conventional ICP/MS instrument, i.e. leaving an intermediate linear quadrupole between the plasma source and the ion trap. The principal advantages found with this system include the destruction of nearly all problematic and typical ICP/MS polyatomic ions (e.g., ArH⁺, ArO⁺, ArCl⁺, Ar₂⁺, etc) and a dramatic reduction of the primary plasma source ion, Ar⁺. These results prompted the development of a second-generation plasma source ion trap instrument in which direct coupling of the ICP and ion trap has been effected (i.e. no intermediate linear quadrupole); the same performance benefits have been largely preserved. Initial operation of this instrument is described, characterized, and compared to the originally described ICP/ITMS and conventional ICP/MS systems. In addition, experiments aimed at improving ICP/ITMS sensitivity and selectivity using broadband resonance excitation techniques are described. Finally, the potential for laser optical detection of trapped ions for analytical purposes is speculated upon.     

Programmed Temperature Vaporization Injection (PTV) in the Analysis by Gas Chromatography-Mass Spectrometry (GC-MS) of the Constituents of Landfill Gas

Abstract

Trace volatile compounds emitted from both domestic and industrial landfills have been identified by programmed temperature vaporization injection (PTV) coupled to gas chromatography with detection by ion-trap mass spectrometry (GC-ITD/MS). The PTV injection system has been developed using a combination of two six-port valves to achieve problems of interference in GC-MS while loading sample. A large volume of landfill gas was re-concentrated onto a sorbent trap, then rapidly liberated into the GC-ITD/MS system by programmed thermal desorption. Using this method, trace volatile compounds in gases from both domestic and industrial landfills such as aromatic hydrocarbons, terpenes, chlorinated hydrocarbons, and sulfur compounds can be identified and quantified.     

电感耦合等离子体质谱法测定水中铀钍元素的含量

建立了电感耦合等离子体质谱测定水中铀钍元素含量的方法。水样以硝酸酸化处理后直接用电感耦合等离子体质谱法测定,为了消除铀记忆效应对测定结果的干扰,测试溶液的质量浓度以不超过10μg/L为宜,样品测定间隙设置清洗时间为2 min。铀钍元素标准曲线线性相关系数分别为0.999 4,0.999 5;铀、钍的检出限分别为0.000 9,0.002 1μg/L;加标回收率分别为95.70%~112.33%,96.94%~109.98%;测定结果的相对标准偏差分别为0.61%~5.33%,1.16%~1.33%。     

Inter-Element Interference Studies in the Determination of Trace Amounts of Plutonium by Inductively Coupled Plasma - Atomic Emission Spectrometry

Abstract

Trace amounts of plutonium in aqueous solutions have been determined by an inductively coupled argon plasma-atomic emission spectrometric (ICP-AES) technique. Extensive studies have been carried out on interelement interference effects for two plutonium lines, viz., 300.06 nm and 453.6 nm, due to the presence of uranium, thorium, lanthanides and other metallic elements in the sample solutions. The analytical range obtained in the present case is 0.1–100 μg/ml with a precision of better than 1% R.S.D. The method ie checked for accuracy by analyzing two wellcharacterizd reference rtandards.     

Direct determination of mercury in cosmetic samples by isotope dilution inductively coupled plasma mass spectrometry after dissolution with formic acid

A new method was proposed for the accurate determination of mercury in cosmetic samples based on isotopic dilution (ID)-photochemical vapor generation (PVG)-inductively coupled plasma mass spectrometry (ICP MS) measurement. Cosmetic samples were directly dissolved in formic acid solution and subsequently subjected to PVG for the reduction of mercury into vapor species following by ICP MS detection. Therefore, the risks of analyte contamination and loss were avoided. Highly enriched ²⁰¹Hg isotopic spike is added to cosmetics and the isotope ratios of ²⁰¹Hg/²⁰²Hg were measured for the quantitation of mercury. With ID calibration, the influences originating from sample matrixes for the determination of mercury in cosmetic samples have been efficiently eliminated. The effects of several experimental parameters, such as the concentration of the formic acid, and the flow rates of carrier gas and sample were investigated. The method provided good reproducibility and the detection limits were found to be 0.6 pg mL⁻¹. Finally, the developed method was successfully applied for the determination of mercury in six cosmetic samples and a spike test was performed to verify the accuracy of the method.     

Determination of Rhenium in Seawater from the Jiulong River Estuary and Taiwan Strait,China by Automated Flow Injection Inductively Coupled Plasma–Mass Spectrometry

A novel and automated flow injection (FI) system using a commercially available anion-exchange resin was developed for the online determination of rhenium in seawater by inductively coupled plasma–mass spectrometry (ICP–MS). The flow rate, reagent concentration, and sample volume were optimized. The rhenium concentration was determined using the integrated peak area through interpolation of standard addition calibration curves. The relative standard deviation was less than 2.45% (n?=?5), the recoveries were from 94.59 to 104.11%, and the linear dynamic range of the method was up to 998?ng?kg^?1. There was a good agreement between the rhenium concentrations in a standard measured in this work with results from previous studies. The limit of detection was 0.11?ng?kg^?1 for a sample volume of 7.5?mL and one cycle required 8.33?min. The developed FI–ICP–MS method was used to determine rhenium in seawater from the Jiulong River Estuary and Taiwan Strait.     

ICP—MS法测定桐油中的重金属元素

目的建立桐油中重金属元素的电感耦合等离子体质谱（ICP—MS）检测方法。方法采用硝酸、双氧水、高氯酸消解法处理样品,用ICP—MS测定桐油中的12种重金属元素。结果12种重金属元素的检出限在0．0008—0．4746μg／L之间,样品回收率在88．9％-108．0％,方法精密度（RSD）为0．3％-7．8％。结论方法简便、快速、准确,可作为桐油中重金属元素含量检测方法。     

Application of laser ablation multicollector inductively coupled plasma mass spectrometry for the measurement of calcium and lead isotope ratios in packaging for discriminatory purposes

The potential of high‐precision calcium and lead isotope ratio measurements using laser ablation coupled to multicollector inductively coupled plasma mass spectrometry (LA‐MC‐ICP‐MS) to aid distinction between four genuine and five counterfeit pharmaceutical packaging samples and further classification of counterfeit packaging samples has been evaluated. We highlight the lack of reference materials for LA‐MC‐ICP‐MS isotope ratio measurements in solids. In this case the problem is minimised by using National Institute of Standards and Technology Standard Reference Material (NIST SRM) 915a calcium carbonate (as solid pellets) and NIST SRM610 glass disc for sample bracketing external standardisation. In addition, a new reference material, NIST SRM915b calcium carbonate, has been characterised in‐house for Ca isotope ratios and is used as a reference sample. Significant differences have been found between genuine and counterfeit samples; the method allows detection of counterfeits and aids further classification of packaging samples. Typical expanded uncertainties for measured‐corrected Ca isotope ratio values (⁴³Ca/⁴⁴Ca and ⁴²Ca/⁴⁴Ca) were found to be below 0.06% (k = 2, 95% confidence) and below 0.2% for measured‐corrected Pb isotope ratios (²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb). This is the first time that Ca isotope ratios have been measured in packaging materials using LA coupled to a multicollector (MC)‐ICP‐MS instrument. The use of LA‐MC‐ICP‐MS for direct measurement of Ca and Pb isotopic variations in cardboard/ink in packaging has definitive potential to aid counterfeit detection and classification. Copyright © 2010 John Wiley & Sons, Ltd.     

Inductively coupled plasma mass spectrometry and atomic emission spectrometry coupled to high-performance liquid chromatography for speciation and detection of organotin compounds

Inductively coupled plasma mass spectrometry (ICP/MS) is utilized as a detector for several organotin species separated by high-performance liquid chromatography. Detection limits obtained by ICP/MS are 3 orders of magnitude lower than those obtained with inductively coupled plasma atomic emission spectrometry (ICP/AES) detection under the same chromatographic conditions. Chromatographic detection limits are higher than conventional solution nebulization for the same compound by a factor of 20. Ion-exchange chromatography yields linear response over 3 orders of magnitude, while ion pair chromatography gives a linear response of only 2 orders of magnitude as a result of poor resolution. The relative standard deviation for the injection of 20 ng of tin compounds is less than 10%.     

Analysis OF Trace Metals In Water By Inductively Coupled Plasma Emission Spectrometry Using Sodium Dibenzyldithiocarbamate For Preconcentration

Abstract

Since concentrations of trace elements in most natural waters seldom exceed the μg/L level, analysis of trace elements in natural waters by inductively coupled plasma emission spectrometry (ICP) requires a preconcentration procedure. The elements Ag, Bi, Cd, Co, Cu, Fe, Mo, Ni, Pb, Sn, V, W, and Zn were separated and concentrated from 500 mL of water by coprecipitating them with sodium dibenzyldithiocarbamate (NaDBDTC) using nickel or silver as a carrier. The precipitated trace elements were collected on a membrance filter, redissolved from the filter with hot nitric and hydrochloric acids, and analyzed using ICP. Recoveries for all the trace elements except tungsten exceeded 80%. Coprecipitation of trace elements with NaDBDTC eliminated the use of difficult-to-inject organic solvents, and NaDBDTC coprecipitated a wider array of trace elements than ammoniumpyrrolidinedithiocarbamate (APDC), another commonly used coprecipitate.     

The influence of the sample introduction system on signals of different tin compounds in inductively coupled plasma-based techniques

The influence of the sample introduction system on the signals obtained with different tin compounds in inductively coupled plasma (ICP) based techniques, i.e., ICP atomic emission spectrometry (ICP–AES) and ICP mass spectrometry (ICP–MS) has been studied. Signals for test solutions prepared from four different tin compounds (i.e., tin tetrachloride, monobutyltin, dibutyltin and di-tert-butyltin) in different solvents (methanol 0.8% (w/w), i-propanol 0.8% (w/w) and various acid matrices) have been measured by ICP–AES and ICP–MS. The results demonstrate a noticeable influence of the volatility of the tin compounds on their signals measured with both techniques. Thus, in agreement with the compound volatility, the highest signals are obtained for tin tetrachloride followed by di-tert-butyltin/monobutyltin and dibutyltin.The sample introduction system exerts an important effect on the amount of solution loading the plasma and, hence, on the relative signals afforded by the tin compounds in ICP–based techniques. Thus, when working with a pneumatic concentric nebulizer, the use of spray chambers affording high solvent transport efficiency to the plasma (such as cyclonic and single pass) or high spray chamber temperatures is recommended to minimize the influence of the tin chemical compound. Nevertheless, even when using the conventional pneumatic nebulizer coupled to the best spray chamber design (i.e., a single pass spray chamber), signals obtained for di-tert-butyltin/monobutyltin and dibutyltin are still around 10% and 30% lower than the corresponding signal for tin tetrachloride, respectively. When operating with a pneumatic microconcentric nebulizer coupled to a 50 °C-thermostated cinnabar spray chamber, all studied organotin compounds provided similar emission signals although about 60% lower than those obtained for tin tetrachloride. The use of an ultrasonic nebulizer coupled to a desolvation device provides the largest differences in the emission signals, among all tested systems.     

ICP-MS法测定电子级高纯硝酸中的金属杂质

用ICP-MS的不同状态（标准状态、冷等离子体技术、碰撞池技术）直接测定电子级高纯硝酸中的34个痕量金属杂质,用铟作内标可补偿基体效应,方法检出限为0.1-70ng/L,加标回收费率为90%-110%,相对标准偏差为4.0%,样品测定结果与ICP-AES测定结果基本一致。     

Electrochemical Determination of Boron in Natural Waters

Abstract

A sensitive voltammetric method for the determination of trace boron, based on the formation of the complex of boric acid with 4‐hydroxy‐5‐[salicylideneamino]‐2‐7‐naphthalenedisulfonic acid (azomethine H) is described. The reduction of the boric acid‐azomethine H complex at a hanging mercury drop electrode was exploited by square wave voltammetry (SWV) and cyclic voltammetry to determine boron in natural water samples, which were collected in the regions surrounding the boron mines of Central Anatolia. A reduction peak that belongs to the boric acid‐azomethine H complex at this electrode was observed at ?1.05 V vs. Ag/AgCl/KCl_(sat.). The effects of various parameters, such as ligand concentration, boric acid concentration, and formation time of the boric acid‐azomethine H complex, were investigated. Electrochemical experiments were conducted in 1.0 M HOAc/0.5 M NH₄OAc buffer at pH of 4.4±0.2. Linear working range was established by regression analysis between 5.0×10^?8 M and 1.0×10^?4 M. The probable metal cation interferences in water samples were eliminated by adding EDTA (ethylenediaminetetraacetic acid) to the samples. Data obtained using the square wave voltammetric (SWV) technique was compared statistically with inductively coupled plasma mass spectroscopy (ICP‐MS) data. Evaluation of the method based on statistical data was performed and the values of the limit of detection (LOD) and limit of quantitation (LOQ) were found to be 4.17×10^?6 M and 1.39×10^?5 M, respectively.