Selenium Enrichment on <Emphasis Type="Italic">Cordyceps militaris</Emphasis> Link and Analysis on Its Main Active Components

To investigate the effects of selenium on the main active components of Cordyceps militaris fruit bodies, selenium-enriched cultivation of C. militaris and the main active components of the fruit bodies were studied. Superoxide dismutase (SOD) activity and contents of cordycepin, cordycepic acid, and organic selenium of fruit bodies were sodium selenite concentration dependent; contents of adenosine and cordycep polysaccharides were significantly enhanced by adding sodium selenite in the substrates, but not proportional to sodium selenite concentrations. In the cultivation of wheat substrate added with 18.0 ppm sodium selenite, SOD activity and contents of cordycepin, cordycepic acid, adenosine, cordycep polysaccharides, and total amino acids were enhanced by 121/145%, 124/74%, 325/520%, 130/284%, 121/145%, and 157/554%, respectively, compared to NS (non-selenium-cultivated) fruit bodies and wild Cordyceps sinensis; organic selenium contents of fruit bodies reached 6.49 mg/100 g. So selenium-enriched cultivation may be a potential way to produce more valuable medicinal food as a substitute for wild C. sinensis.     

Effects of Selenium and Light Wavelengths on Liquid Culture of <Emphasis Type="Italic">Cordyceps militaris</Emphasis> Link

To investigate the effects of selenium and light wavelengths on the growth of liquid-cultured Cordyceps militaris and the main active components’ accumulation, culture conditions as selenium selenite concentrations and light of different wavelengths were studied. The results are: adenosine accumulation proved to be significantly selenium dependent (R ² = 0.9403) and cordycepin contents were determined to be not significantly selenium dependent (R ² = 0.3845) but significantly enhanced by selenium except for 20 ppm; there were significant differences in cordycepin contents, adenosine contents, and mycelium growth caused by light wavelengths: cordycepin, blue light > pink light > daylight, darkness, red light; adenosine, red light > pink light, darkness, daylight, blue light; and mycelium growth, red light > pink light, darkness, daylight > blue light. In conclusion, light wavelength had a significant influence on production of mycelia, adenosine, and cordycepin, so lightening wavelength should be changed according to target products in the liquid culture of C. militaris.     

Functional Analysis of Ribonucleotide Reductase from <Emphasis Type="Italic">Cordyceps militaris</Emphasis> Expressed in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Cordyceps militaris produces cordycepin (3′-deoxyadenosine), which has various activities, including anti-oxidant, anti-tumoral, anti-viral, and anti-inflammatory. Ribonucleotide reductase (RNR) seems to be a candidate to produce cordycepin in C. militaris because RNR catalyzes the reduction of nucleotides to 2′-deoxynucleotides, whose structures are similar to that of cordycepin. However, the role of RNR has not been confirmed yet. In this study, complementary DNAs (cDNAs) of C. militaris RNR (CmRNR) large and small subunits (CmR1 and CmR2) were cloned from C. militaris NBRC9787 to investigate the function of CmRNR for its cordycepin production. C. militaris NBRC9787 began to produce cordycepin when grown in a liquid surface culture in medium composed of glucose and yeast extract for 15 days. CmR1 cDNA and CmR2 cDNA were obtained from its genomic DNA and from total RNA extracted from its mycelia after cultivation for 21 days, respectively. Recombinant CmR1 and CmR2 were expressed individually in Escherichia coli and purified. Purified recombinant CmR1 and CmR2 showed RNR activity toward adenosine diphosphate (ADP) only when two subunits were mixed but only show the reduction of ADP to 2′-deoxyADP. These results indicate that the pathway from ADP to 3′deoxyADP via CmRNR does not exist in C. militaris and cordycepin production in C. militaris may be mediated by other enzymes.     

Production of Cordycepin and Mycelia by Submerged Fermentation of Cordyceps militaris in Mixture Natural Culture

The submerged fermentation of Cordyceps militaris for cordycepin production and mycelial growth was investigated in this study. Three natural materials of brown rice paste (BRP), beerwort (B), and soybean meal juice (SMJ) were used for fermentation of C. militaris in shaking flasks. The effects of the ratio of three natural materials on dry mycelium weight (DMW) and on cordycepin yield (CY) were analyzed. D-Optional mixture design was used to optimize the ratio of these materials. Compared with the signal culture, the higher mycelial growth and cordycepin production were obtained in mixture. The analysis of Design Expert 6.0 indicated that BRP, B, and SMJ very significantly influenced (P < 0.001) DMW and CY of C. militaris, respectively. The highest DMW (18.96 g/l) and CY (2.17 mg/g) were both obtained at a ratio of 53:6:42. The experiments’ results indicated that the above mixture of these natural materials by D-optional mixture design can be used as a proper medium for the growth of mycelium and the production of cordycepin.     

An LC–DAD Fingerprinting Method for Alkaloids,Flavonoids and Styrylpyrones from Cryptocarya mandioccana

An LC–DAD method has been developed in order to evaluate qualitatively and quantitatively quaternary aporphine alkaloids, flavonoid glycosides and styrylpyrones, which are the main secondary metabolites of leaves from C. mandioccana. The chromatographic method was validated considering both internal and external standard quantification methods and showed good performances in terms of selectivity, linearity, precision (repeatability and intermediate precision), limit of detection, limit of quantification, accuracy and stability.

     

Development and Validation of an RP–LC–UV Method for the Determination of Ondansetron: Application to Pharmaceutical Dosage Forms

A new, simple, rapid, sensitive and specific isocratic RP–LC–UV method was developed and validated for the determination of ondansetron in pharmaceutical dosage forms of orally disintegrating tablets, oral solution and injection. The LC separation was achieved on a Hypersil C4 column (250 × 4.6 mm, 5 μm) using a mobile phase of 50 mM potassium dihydrogen phosphate anhydrous adjusted to pH 3.5 with orthophosphoric acid and acetonitrile (30:70, v/v) at a flow rate of 1.0 mL min^?1 and UV detection at 310 nm. The method was validated for specificity, linearity, precision, accuracy, limit of quantification, limit of detection, robustness and solution stability. The calibration curve was linear over a concentration range of 100–1,000 ng mL^?1 (r ²  = 0.9996) with limit of detection and limit of quantification 50 and 100 ng mL^?1, respectively. The intra-day and inter-day precision and accuracy were between 0.79 and 2.37% and ?0.64 and 1.65%, respectively. The method was successfully applied for analysis of ondansetron in the presence of excipients in commercially available pharmaceutical dosage forms.     

Method Development and Validation of a Rapid Determination of Ropinirole in Tablets by LC-UV

A reversed-phase high-performance liquid chromatographic (HPLC) method with UV detection was developed and validated for the determination of ropinirole (ROP) in tablets. The assay utilized UV detection at 250 nm and a Luna CN column (250 × 4.6 mm I.D, 5 μm). The mobile phases were comprised of acetonitrile: 10 mM nitric acid (pH 3.0) (75:25, v/v). Validation experiments were performed to demonstrate linearity, accuracy, precision, limit of quantitation (LOQ), limit of detection (LOD), and robustness. The method was linear over the concentration range of 0.5–10.0 μg mL⁻¹. The method showed good recoveries (99.75–100.20%) and the relative standard deviations of intra and inter-day assays were 0.38–1.69 and 0.45–1.95%, respectively. The method can be used for quality control assay of ropinirole.     

Quantitative determination and validation of avermectin B1a in commercial products using quantitative nuclear magnetic resonance spectroscopy

Nuclear magnetic resonance is defined as a quantitative spectroscopic tool that enables a precise determination of the number of substances in liquids as well as in solids. There is few report demonstrating the application of NMR in the quantification of avermectin B_1a (AVB_1a); here, a proton nuclear magnetic resonance spectroscopy (¹H NMR) using benzene [1‐methoxy‐4‐(2‐nitroethyl) (PMN)] as an internal standard and deuterochloroform as an NMR solvent was tested for the quantitative determination of AVB_1a. The integrated signal of AVB_1a at 5.56 ppm and the signal of PMN at 8.14 ppm in the ¹H NMR spectrum were used for quantification purposes. Parameters of specificity, linearity, accuracy, precision, intermediate precision, range, limit of detection (LOD), limit of quantification (LOQ), stability and robustness were validated. The established method was accurate and precise with good recovery (98.86%) and relative standard deviation (RSD) of assay (0.34%) within the linearity of the calibration curve ranging from 5.08 to 13.58 mg/ml (R² = 0.9999). The LOD and LOQ were 0.009 and 0.029 mg/ml, which indicated the excellent sensitivity of the method. The stability of the method was testified by a calculated RSD of 0.11%. The robustness was testified by modification of four different parameters, and the differences among each parameter were all less than 0.1%. Comparing with the assay described by the manufacturer of avermectin tablets, there was no significant difference between the assay obtained by HPLC and quantitative NMR (qNMR), which indicated qNMR was a simple and efficient method for the determination of AVB_1a in commercial formulation products. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of 13C isotopic enrichment of valine and threonine by GC-C-IRMS after formation of the N(O,S)-ethoxycarbonyl ethyl ester derivatives of the amino acids

We describe a new method of assessing, in a single run, ¹³C isotopic enrichment of both Val and Thr by gas chromatography–combustion–isotope-ratio mass spectrometry (GC–C–IRMS). This method characterised by a rapid one-step derivatisation procedure performed at room temperature to form the N(O,S)-ethoxycarbonyl ethyl ester derivatives, and a polar column for GC. The suitability of this method for Val and Thr in in-vivo samples (mucosal hydrolysate) was demonstrated by studying protein metabolism with two tracers (¹³C-valine or ¹³C-threonine). The intra-day and inter-day repeatability were both assessed either with standards or with in-vivo samples at natural abundance and at low ¹³C isotopic enrichment. For inter-day repeatability CVs were between 0.8 and 1.5% at natural abundance and lower than 5.5% at 0.112 and 0.190 atom% enrichment for Val and Thr, respectively. Overall isotopic precision was studied for eleven standard amino acid derivatives (those of Val, Ala, Leu, Iso, Gly, Pro, Asp, Thr, Ser, Met, and Phe) and was assessed at 0.32‰. The ¹³C isotopic measurement was then extended to the other amino acids (Ala, Val, Leu, Iso, Gly, Pro, Thr, and Phe) at natural abundance for in-vivo samples. The isotopic precision was better than 0.002 atom% per amino acid (for n = 4 rats). This analytical method was finally applied to an animal study to measure Thr utilization in protein synthesis.     

Simultaneous determination of nucleosides and their bases in Cordyceps sinensis and its substitutes by matrix solid‐phase dispersion extraction and HPLC

Nine nucleosides and nucleobases, including uracil, adenine, thymine, uridine, adenosine, thymidine, cytidine, guanosine, and cordycepin in natural Cordyceps sinensis, cultured Cordyceps mycelia, and Cordyceps fruiting bodies were extracted by matrix solid‐phase dispersion (MSPD) and determined by HPLC. The experimental conditions for the MSPD extraction were optimized. Florisil was used as dispersant, petroleum ether as washing solvent, and methanol as elution solvent. The Florisil‐to‐sample ratio was selected to be 4:1 and no additional clean‐up sorbent was needed. The calibration curves had good linear relationships (r > 0.9997). The LOD and LOQ were in the range of 12 ～ 79 and 41 ～ 265 ng/mL, respectively. The intra‐ and interday precision were lower than 8.3%. The recoveries were between 61.5 and 93.2%. The present method consumed less sample compared with ultrasonic extraction and heating reflux extraction (HRE). The extraction yields obtained by using the present method are much higher than those obtained by UE and comparable to those obtained by HRE.     

Validated Liquid–Liquid Extraction and LC–ESI–MS Method for the Determination of Melitracen in Human Plasma

Melitracen and the internal standard (I.S.), trifluoperazine, were extracted from plasma by a convenient liquid-liquid extraction. Chromatographic separation was performed on a Thermo Hypersil-Hypurity C₁₈ with the mobile phase consisting of 10 mM ammonium acetate–methanol–acetonitrile. A single-quadrupole mass spectrometer with an electrospray interface was operated in the selected-ion monitoring mode to detect the [M + H]⁺ ions at 292 m/z for melitracen and 408 m/z for trifluoperazine. The method was validated over 0.4–50.0 ng mL⁻¹ for melitracen. The recovery was 73.52–78.91%, and the lower limit of quantitation (LLOQ) detection was 0.4 ng mL⁻¹ for melitracen. The intra- and inter-day precision of the method at three concentrations were 2.96–7.76% with accuracy of 95.75–100.48%. Stability of compounds was established in a battery of stability studies. The bioequivalence of melitracen in the two formulations was evaluated in 18 healthy Chinese male volunteers with this assay. The described method showed acceptable precision, accuracy, linearity, stability, specificity and can be widely used for pharmacokinetic studies, and routine therapeutic drug monitoring.

     

Voltammetric determination of boron by using Alizarin Red S

Cordycepin is the main active metabolite of Cordyceps militaris extracts; according to recent studies it has interesting therapeutic activities. A new capillary electrophoresis (CE) procedure with UV detection at 254 nm for determination of cordycepin was developed and optimized. Optimal conditions found were 20 mM sodium borate buffer with 28.6% methanol, pH 9.5, separation voltage 20 kV, hydrodynamic injection time 10 s and temperature 25 °C. Linearity was found over the 20-100 μg/mL concentration ranges of cordycepin. The developed method has been applied for determination of cordycepin in various pharmaceutical products. A comparison was made between CE and a high performance liquid chromatography (HPLC) method. Both of these methods gave comparable results. The shorter analysis time and low running cost are the main advantages of CE method.     

HPLC-UV analytical method for determination of pizotifen after in vitro transdermal diffusion studies

Pizotifen malate is an antihistamine and serotonin inhibitor used in the preventive treatment of migraine and eating disorders. A simple, rapid, accurate and precise high‐performance liquid chromatography (HPLC) method involving ultraviolet detection was validated for the quantitative analysis of pizotifen malate in samples from in vitro transdermal diffusion studies. The method was validated for specificity, linearity, accuracy, precision, limit of detection, limit of quantification and robustness. Drug stability in the solution was also determined under different conditions. Separation was carried out using a 250 × 4.0 mm Kromasil^® C₁₈ column at room temperature. The detector response, fitted at 254 nm, was found to be linear in a concentration range between 0.24 and 24.0 µg/mL. The limit of detection was 0.02 µg/mL and the limit of quantification was 0.07 µg/mL. Finally, in vitro transdermal diffusion of pizotifen malate was characterized using the validated HPLC method. Copyright © 2011 John Wiley & Sons, Ltd.     

Development and evaluation of a high‐performance liquid chromatography/isotope ratio mass spectrometry methodology for δ13C analyses of amino sugars in soil

Amino sugars have been used as biomarkers to assess the relative contribution of dead microbial biomass of different functional groups of microorganisms to soil carbon pools. However, little is known about the dynamics of these compounds in soil. The isotopic composition of individual amino sugars can be used as a tool to determine the turnover of these compounds. Methods to determine the δ¹³C of amino sugars using gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS) have been proposed in literature. However, due to derivatization, the uncertainty on the obtained δ¹³C is too high to be used for natural abundance studies. Therefore, a new high‐performance liquid chromatography/isotope ratio mass spectrometry (HPLC/IRMS) methodology, with increased accuracy and precision, has been developed. The repeatability on the obtained δ¹³C values when pure amino sugars were analyzed were not significantly concentration‐dependent as long as the injected amount was higher than 1.5 nmol. The δ¹³C value of the same amino sugar spiked to a soil deviated by only 0.3‰ from the theoretical value. Copyright © 2009 John Wiley & Sons, Ltd.     

Development and Validation of an HPLC–UV Method for the Determination of Insulin in Rat Plasma: Application to Pharmacokinetic Study

A simple, sensitive high performance liquid chromatographic method with UV detection was developed and validated for determination of insulin in rat plasma, using methyl paraben as an internal standard. Insulin was extracted from plasma by a liquid–liquid extraction with a mixture of dichloromethane and n-hexane (1:1, v/v) followed by an acidic back extraction. Chromatographic separation was achieved isocratically with a Phenomenex® C₁₈ analytical column (150 × 4.6 mm ID, 5 μm) at ambient room temperature. The calibration curves were linear within a concentration range of 0.7–8.4 μg mL^?1 (r ² = 0.9994). The inter-day and intra-day accuracy and precision were ≤3.33 and ≤5.55%. The limit of detection (LOD) and limit of quantification (LOQ) were 0.35 and 0.7 μg mL^?1. The average recovery was 87.86% for insulin and 83.52% for methyl paraben. Insulin containing plasma samples were stable at ?20 °C for 7 days. Validated HPLC method was successfully applied to a pharmacokinetic study of insulin in streptozotocin induced diabetic rats.     

Determination of benzothiazole in untreated wastewater using polar-phase stir bar sorptive extraction and gas chromatography-mass spectrometry

Stir bar sorptive extraction (SBSE) was applied to extract benzothiazole (BT) from untreated wastewater using a novel polyacrylate (PA)-coated stir bar (PA Twister^®). After extraction, BT was desorbed in a thermal desorption system (TDS) and analysed by GC–MS (gas chromatography–mass spectrometry). The sample contained 30% (w/w) NaCl, the sample temperature was 30 °C and the extraction time was 240 min. Since no filtering or clean-up steps or solvents were necessary SBSE clearly performs better than all previously used extractions techniques for analysing BT in untreated wastewater in terms of easy use, sample throughput and analytical costs. In addition, matrix effects were small. The calibration curve resulting from the standard addition method was linear with a value of the stability index (R²) of 0.999 (n = 3). A good inter-day repeatability of the method was observed with a relative standard deviation (RSD) of 9.8% (n = 6). A low limit of detection (LOD) of 0.256 μg L⁻¹ was achieved using only a small sample volume of 18 mL. Small sample volumes significantly reduce sample transport costs. The concentration of BT in untreated wastewater was determined to be 1.04 μg L⁻¹.     

A New p‐Terphenyl Derivative from the Mushroom Thelephora vialis

One novel p‐terphenyl compound, named vialisyl A ( 1 ), was isolated from the fruiting bodies of Thelephora vialis, together with six known compounds, ganbajunin B ( 2 ), phenylacetic acid ( 3 ), a mixture of ganbajunins D ( 4 ) and E ( 5 ), and vialinins A ( 6 ) and B ( 7 ). Their structures were established by extensive analysis of spectroscopic data (including ¹H‐ and ¹³C‐NMR, HSQC, HMBC, 2D‐INADEQUATE) as well as by comparison with literature reports.     

HPLC assay method for ceftibuten in plasma and its application to pharmacokinetic study

The purpose of this study was to validate a reliable analytical method for pharmacokinetic study of ceftibuten in human plasma by high performance liquid chromatography (HPLC) system with UV detection. Ceftizoxime was used as the internal standard. After plasma sample was precipitated with acetonitrile and dichloromethane, the supernatant was directly injected into the HPLC system. Separation was performed on a Capcell Pak C₁₈ UG120 column (4.6 mm × 250 mm, 5 μm particles) with a mobile phase of acetonitrile/50 mM ammonium acetate (5: 95, v/v) and UV detection at a wavelength of 262 nm. The intra- and inter-day precision expressed as the relative standard deviation was less than 15%. The lower limit of quantification was 0.5 hg/mL of ceftibuten using 0.5 mL of plasma. The calibration curve was linear in concentration range of 0.5–30 μg/mL (r ² = 0.9998). The mean accuracy was 96–102%. The coefficient of variation (precision) in the intra- and inter-day validation was 0.9–3.9 and 0.9–2.4%, respectively. The pharmacokinetics of ceftibuten was evaluated after a single oral administration of 400 mg to healthy volunteers. The AUC_{0–9 h}, c _max, T _max, and T _1/2 were 86.6 ± 12.7 μg h/mL, 18.4 ± 1.5 μg/mL, 2.63 ± 0.83 and 2.65 ± 0.41 h, respectively. The method was demonstrated to be highly reproducible and feasible for pharmacokinetic studies of ceftibuten in eight volunteers after oral administration (400 mg as ceftibuten).     

Development and Validation of a Sensitive LC–Tandem-MS Method for the Quantitative Determination of Picroside II in Rat Plasma

A rapid and sensitive method for the quantitative determination of picroside II in rat plasma was developed and validated using liquid chromatographic separation with tandem mass spectrometric detection. The analytes of interest were extracted from rat plasma samples by ethyl acetate after acidification with 1.0% acetic acid solution. Chromatographic separation was achieved on a Hypersil GOLD column (50 × 2.1 mm I.D., 5 μm) using a mobile phase consisting of acetonitrile–0.1% formic acid solution (30:70, v/v) at a flow rate of 0.2 mL min⁻¹. Detection was performed on a triple quadrupole tandem mass spectrometer by selected reaction monitoring (SRM) mode via electrospray ionization (ESI). The calibration curve was linear in the concentration range of 1.00–400 ng mL⁻¹ in rat plasma, with a 1.00 ng mL⁻¹ lower limit of quantification (LLOQ). Satisfactory results were achieved for intraday repeatability [relative standard deviation (RSD) = 6.4–12.4%] and inter-day precision (RSD = 6.8–14.7%). The accuracy in terms of relative error ranged from −2.1 to 10.0%. The extraction recoveries of picroside II and icariin (internal standard) were 80.0 and 89.3%, respectively. The developed method was successfully employed to determine picroside II plasma concentrations after oral administration to Wistar rats.

     

Focused Microwave-Assisted Extraction and LC Determination of Ketoprofen in the Presence of Preservatives in a Pharmaceutical Cream Formulation

A simple and rapid open-vessel focused microwave-assisted extraction (FMAE) method followed by LC analysis was developed for the determination of ketoprofen lysine salt in the presence of methyl p-hydroxybenzoate and propyl p-hydroxybenzoate preservatives in topical cream. Extraction were performed in acetone/potassium dihydrogenphosphate (25 mM, pH 3.0) (70:30 v/v) by reaching a target temperature of 65 °C in a 10 min linear ramp. The chromatographic separation was performed on a Discovery RP-Amide C16 column (250 × 4.6 mm I.D., 5 μm particle size). The optimal mobile phase consisted of acetonitrile/potassium dihydrogen phosphate 25 mM adjusted to pH 3.0 with phosphoric acid (50:50 v/v). The complete analytical procedure was validated with regard to limit of quantification, linearity, precision and accuracy. The method was linear over the concentration range of 0.08–0.12 mg mL⁻¹; the relative standard deviations of intra- and inter-day assays were 1.9–2.3 and 1.8% respectively. The limit of quantification was 0.54 μg mL⁻¹. The proposed method shows many advantages as short extraction time, little solvent consumption without requiring further sample clean-up steps before liquid chromatographic analysis and is proposed for vast scale screening of cream dosage forms aimed to the detection of counterfeit and substandard drugs.