可回收Fe3O4@SiO2-Ag磁性纳米微球对染料污染物的快速脱色处理

介绍了一种采用无毒廉价的前驱物制备Fe₃O₄@SiO₂-Ag磁性纳米微球的快捷方法,制备的Fe₃O₄@SiO₂-Ag纳米微球在NaBH₄存在下可以催化还原染料污染物.实验结果表明,Fe₃O₄@SiO₂-Ag磁性纳米粒子保持了Ag纳米粒子和Fe₃O₄纳米粒子的双重优点,不仅对染料罗丹明B和曙红Y具有良好的催化还原效率,而且可以在外加磁场作用下从溶液中快速有效的分离.催化还原反应速率与反应温度及Fe₃O₄@SiO₂-Ag催化剂用量有关,反应体系中表面活性剂和无机盐(Na₂SO₄)的存在也会影响催化剂的催化活性.该Fe₃O₄@SiO₂-Ag磁性纳米粒子在工业染料污染物处理方面具有应用前景.     

Fe3O4@SiO2@polymer复合粒子的制备及在药物控制释放中的应用

本文通过多步反应制备了一种新型的、多层结构的、多功能的磁性纳米复合粒子, (Fe₃O₄@SiO₂@polymer). 纳米复合粒子内核是磁性Fe₃O₄纳米粒子, SiO₂包裹在Fe₃O₄上能够使其稳定分散和保护其不被腐蚀氧化; 中间层是生物相容的聚天冬氨酸(PAsp)载药层; 最外层是亲水的聚乙二醇(PEG)稳定层. 磁性纳米复合粒子各层都是生物相容的, 利用静电作用将抗癌药物阿霉素(DOX)负载在磁性纳米复合粒子中, 通过PAsp的pH响应调节了DOX的释放速率.     

Synthesis of Fe3O4@SiO2-Au/Cu magnetic nanoparticles and its efficient catalytic performance for the Ullmann coupling reaction of bromamine acid

Over bimetallic Au/Cu catalyst supported on magnetic Fe₃O₄ nanoparticles, water-mediated bromamine acid could be selectively converted into 4,4'-diamino-1,1'-dianthraquinonyl-3,3'-disulfonic acid (DAS) with a yield of 88.67%. The magnetic catalyst could be readily separated and reused.     

磁性Fe_3O_4@SiO_2@ZrO_2对水中磷酸盐的吸附研究

合成了以Fe3O4为核,以SiO2为壳的磁性纳米微粒(Fe3O4@Si O2),并采用沉淀沉积法将ZrO2包覆到材料表面。通过XRD、TEM、VSM、ζ电位、XPS和N2吸附/脱附等手段对材料进行表征,结果表明材料Fe3O4@SiO2@ZrO2上沉积了氧化锆纳米颗粒,具有超顺磁性,可在外加磁场作用下实现从水中快速分离。同时系统研究了材料对水中磷酸盐的吸附行为,结果表明沉积Zr O2使得材料对磷酸盐表现出良好的吸附性能,并且随着沉积量的增大吸附量增加。吸附等温线符合Freundlich方程。吸附动力学可用拟二级动力学模型描述,吸附速率随磷酸盐初始浓度增加而减小。磷酸盐吸附量随溶液p H值的增大而减小,但几乎不受离子强度影响。     

磁性Fe3O4@SiO2@ZrO2对水中磷酸盐的吸附研究

合成了以Fe₃O₄为核,以SiO₂为壳的磁性纳米微粒（Fe₃O₄@SiO₂）,并采用沉淀沉积法将ZrO₂包覆到材料表面。通过XRD、TEM、XPS和N₂吸附/脱附等手段对材料进行表征,结果表明材料Fe₃O₄@SiO₂@ZrO₂上沉积了氧化锆纳米颗粒,具有超顺磁性,可在外加磁场作用下实现从水中快速分离。同时系统研究了材料对水中磷酸盐的吸附行为,结果表明沉积ZrO₂使得材料对磷酸盐表现出良好的吸附性能,并且随着沉积量的增大吸附量增加。吸附等温线可用Freundlich方程拟合。吸附动力学可用拟二级动力学模型拟合,吸附速率随初始浓度增加而减缓。磷酸盐吸附量随溶液pH值的增大而减小,但几乎不受离子强度影响。     

Picolinimidoamide-Cu(II) complex anchored on Fe3O4@SiO2 core–shell magnetic nanoparticles: an efficient reusable catalyst for click reaction

A Cu(II) complex supported on Fe₃O₄@SiO₂ core–shell magnetic nanoparticles (MNPs) was prepared and characterized by FT-IR, XRD, SEM, EDX, TEM, VSM, TGA, and AAS analysis. The load of Cu on picolinimidoamide ligand anchored on Fe₃O₄@SiO₂ core–shell MNPs was determined as 1.22, 1.54, and 1.70 wt% using AAS, EDX and TGA analyses, respectively. Synthesized Cu(II) complex on Fe₃O₄@SiO₂ MNPs efficiently catalyzed a click reaction between alkyl halides, alkynes, and sodium azide to synthesize corresponding triazoles in high to excellent yields. The catalyst was recovered using an external magnetic field, and recycled for subsequent reactions without substantial loss of efficiency.     

Fe3O4@SiO2–NH2 core-shell nanocomposite as an efficient and green catalyst for the multi-component synthesis of highly substituted chromeno[2,3-b]pyridines in aqueous ethanol media

ABSTRACT

An efficient and green approach for synthesizing chromeno[2,3-b]pyridine derivatives through one-pot three-component reactions of salicylaldehydes, thiols, and malononitrile has been developed by Fe₃O₄@SiO₂–NH₂ nanocatalyst in aqueous ethanol media under re?ux conditions. The present procedure provides several advantages such as environmentally benign, straightforward, excellent yields, short reaction times, cost-effective, good recyclability, little catalyst loading, and facile catalyst separation for the preparation of chromeno[2,3-b]pyridines as important privileged medicinal scaffold. In addition, aminopropyl-coated Fe₃O₄@SiO₂ nanoparticles were fully characterized by scanning electron microscopy, X-ray diffraction, energy dispersive analysis of X-ray, vibrating sample magnetometer, and FT-IR analysis.     

基于N-乙酰-L-半胱氨酸修饰的ZnFe2O4@SiO2纳米材料手性识别酪氨酸对映异构体

我们将N-乙酰-L-半胱氨酸（NALC）修饰于ZnFe₂O₄@SiO₂纳米材料表面,制备了一种新型的手性纳米复合物（ZnFe₂O₄@SiO₂-NALC）,该材料能够简便、快速及高选择性地识别手性酪氨酸（Tyr）对映体。利用X射线粉末衍射（XRD）、红外光谱（FT-IR）、能量色散X射线光谱（EDS）、扫描电子显微镜（SEM）、高分辨率透射电子显微镜（HRTEM）和振动样品磁力计（VSM）等一系列表征手段对首次合成出的ZnFe₂O₄@SiO₂-NALC进行测试表征,并将其应用于对手性识别领域的探究。实验结果表明,利用光谱技术（紫外-可见光谱和荧光光谱）,ZnFe₂O₄@SiO₂-NALC可对Tyr对映异构体进行手性识别。此外,我们进一步对Tyr浓度和pH值等实验参数进行了优化。     

An efficient ‘on-water’ synthesis of 1,4-dihydropyridines using Fe3O4@SiO2 nanoparticles as a reusable catalyst

An ‘on-water’, efficient, high yielding, expeditious method has been developed for the synthesis of 1,4-dihydropyridine (1,4-DHP) derivatives via an one-pot multi-component condensation of dimedone or 4-hydroxycoumarine, aldehydes, and ammonium acetate using Fe₃O₄@SiO₂ nanoparticles as a recyclable heterogeneous catalyst. This method takes advantage of the fact that water, a green solvent is used in combination with Fe₃O₄@SiO₂ nanoparticles as catalyst which can be easily recovered magnetically and reused for further runs.     

聚乙烯基胺包裹Fe3O4@SiO2磁性微球用于Knoevenagel缩合（英文）简

Polyvinyl amine coated Fe₃O₄@SiO₂ composite microspheres with a core-shell structure were prepared and employed as a magnetic catalyst for Knoevenagel condensation under mild conditions. The catalyst can be readily recovered using a magnet and reused several times without loss in activity or selectivity. The performance of the magnetic base catalyst was compared with that of polyvinyl amine functionalized mesoporous SBA-15, which showed that the magnetic nanoparticles gave improved reaction rate and yield.     

Amperometric Immunosensor Based on Gold Nanoparticles/Fe3O4-FCNTs-CS Composite Film Functionalized Interface for Carbofuran Detection

In this paper, a novel amperometric immunosensor for the determination of carbofuran based on gold nanoparticles (GNPs), magnetic Fe₃O₄ nanoparticles-functionalized multiwalled carbon nanotubes-chitosan (Fe₃O₄-FCNTs-CS), and bovine serum albumin (BSA) composite film was proposed. First, GNPs were immobilized onto the glassy carbon electrode (GCE) surface, and then the magnetic Fe₃O₄ nanoparticles mixed with chitosan-functionalized multiwall carbon nanotubes (CS-FCNTs) homogeneous composite (CS-FCNTs-Fe₃O₄) was immobilized onto the GNPs layer by electrostatic interactions between amino groups of CS and GNPs. Because chitosan (CS) contains many amino groups, it can absorb more antibodies. FCNTs have high surface area, high electrical conductivity, and it can enhance the electron transfer rate; Magnetite (Fe₃O₄) nanoparticles can provide a favorable microenvironment for biomolecules immobilization due to their good biocompatibility, strong superparamagnetic property, and low toxicity; and GNPs possess high surface-to-volume reaction, stability, and high conductivity. Gold Nanoparticles/Fe₃O₄-FCNTs-CS composite film was constructed onto the GCE surface, which had significant synergistic effects toward immunoreaction signal amplification. The stepwise assembly process was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), respectively. Under the optimal conditions, the current response was proportional to the concentration of carbofuran ranging from 1.0 ng/mL to 100.0 ng/mL and from 100.0 ng/mL to 200 µg/mL with the detection limit 0.032 ng/mL. The proposed immunosensor exhibited good accuracy, high sensitivity, and stability, and it can be used for detection of carbofuran pesticide.     

Development of Fe3O4-poly(l-lactide) magnetic microparticles in supercritical CO2

The Fe₃O₄-poly(l-lactide) (Fe₃O₄-PLLA) magnetic microparticles were successfully prepared in a process of solution-enhanced dispersion by supercritical CO₂ (SEDS), and their morphology, particle size, magnetic mass content, surface atom distribution and magnetic properties were characterized. Indomethacin (Indo) was used as a drug model to produce drug-polymer magnetic composite microparticles. The resulting Fe₃O₄-PLLA microparticles with mean size of 803 nm had good magnetic property and a saturation magnetization of 24.99 emu/g. The X-ray photoelectron spectroscopy (XPS) test indicated that most of the Fe₃O₄ were encapsulated by PLLA, which indicated that the Fe₃O₄-PLLA magnetic microparticles had a core–shell structure. After further loading with drug, the Indo-Fe₃O₄-PLLA microparticles had a bigger mean size of 901 nm, and the Fourier transform infrared spectrometer (FTIR) analysis demonstrated that the SEDS process was a typical physical coating process to produce drug-polymer magnetic composite microparticles, which is favorable for drugs since there is no change in chemistry. The in vitro cytotoxicity test showed that the Fe₃O₄-PLLA magnetic microparticles had no cytotoxicity and were biocompatible, which means there is potential for biomedical application.     

Fabrication of Fe3O4@SiO2 nanocomposites to enhance anticorrosion performance of epoxy coatings

SiO₂‐coated Fe₃O₄ (Fe₃O₄@SiO₂) nanocomposites were prepared by sol–gel method, and the anticorrosion performance of composite coatings was discussed. The structure of the Fe₃O₄@SiO₂ nanocomposites was verified through Fourier transform infrared, X‐ray diffraction, and scanning electron microscopy. Composite epoxy coatings with same concentrations of Fe₃O₄ and Fe₃O₄@SiO₂ were measured by scanning electron microscopy contact angle meter. More importantly, the Fe₃O₄@SiO₂ nanocomposites not only obtained a homogeneous dispersion and compatibility in epoxy resin but also exhibited an obvious superiority in enhancing the anticorrosion performance of epoxy coatings. Furthermore, the anticorrosion mechanism of Fe₃O₄@SiO₂/epoxy composite coating was tentatively discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

用于高效去除水中孔雀石绿的三层结构磁性复合材料Fe3O4@聚丙烯酸@ZiF-8的制备

设计并合成了一种以磁性纳米粒子为核,聚合物为中间层,金属有机骨架材料为外层的三层结构磁性复合材料(Fe₃O₄@PAA@ZIF-8)。首先利用溶剂热法制备Fe₃O₄纳米粒子,然后通过蒸馏沉淀聚合法在Fe₃O₄纳米粒子表面包覆聚丙烯酸(PAA)层,最后通过原位沉积法在PAA外部包覆ZIF-8。在对Fe₃O₄@PAA@ZIF-8的组成和结构进行表征的基础上,深入研究其对孔雀石绿(MG)的吸附性能。透射电子显微镜(TEM)显示Fe₃O₄@PAA@ZIF-8具有明显的三层结构,Fe₃O₄的平均粒径为117nm,PAA层厚度约为17 nm,ZIF-8层的厚度约为14 nm。Fe₃O₄@PAA@ZIF-8对MG的吸附量随着p H的升高而增大,吸附过程符合准二阶动力学模型和Langmuir等温吸附模...     

用于高效去除水中孔雀石绿的三层结构磁性复合材料Fe3O4@聚丙烯酸@ZiF-8的制备

设计并合成了一种以磁性纳米粒子为核，聚合物为中间层，金属有机骨架材料为外层的三层结构磁性复合材料(Fe₃O₄@PAA@ZIF 8)。首先利用溶剂热法制备Fe₃O₄纳米粒子，然后通过蒸馏沉淀聚合法在Fe₃O₄纳米粒子表面包覆聚丙烯酸(PAA)层，最后通过原位沉积法在PAA外部包覆ZIF 8。在对Fe₃O₄@PAA@ZIF 8的组成和结构进行表征的基础上，深入研究其对孔雀石绿(MG)的吸附性能。透射电子显微镜(TEM)显示 Fe₃O₄@PAA@ZIF 8 具有明显的三层结构，Fe₃O₄的平均粒径为 117nm，PAA 层厚度约为 17 nm，ZIF 8层的厚度约为 14 nm。Fe₃O₄@PAA@ZIF 8对 MG 的吸附量随着 pH 的升高而增大，吸附过程符合准二阶动力学模型和 Langmuir等温吸附模型。此外，Fe₃O₄@PAA@ZIF 8还表现出良好的重复利用性能，8次循环利用后对MG(500 mg·L^-1)的最大吸附量仍可达982 mg·g^-1。     

Mn(III) complex supported on Fe3O4 nanoparticles: magnetically separable nanocatalyst for selective oxidation of thiols to disulfides

A manganese(III) complex, [Mn(phox)₂(CH₃OH)₂]ClO₄ (phox?=?2-(2′-hydroxyphenyl)oxazoline), was immobilized on silica-coated magnetic Fe₃O₄ nanoparticles through the amino propyl linkage using a grafting process in dichloromethane. The resulting Fe₃O₄@SiO₂–NH₂@Mn(III) nanoparticles are used as efficient and recyclable catalysts for selective oxidation of thiols to disulfides using urea-hydrogen peroxide as the oxidant. The nanocatalyst was recycled several times. Leaching and recycling experiments revealed that the nanocatalyst can be recovered, recycled, and reused more than five times, without the loss of catalytic activity and magnetic properties. The recycling of the nanocatalyst in six consecutive runs afforded a total turnover number of more than 10,000. The heterogeneous Fe₃O₄@SiO₂–NH₂@Mn(III) nanoparticle shows more selectivity for the formation of disulfides in comparison with the homogeneous manganese complex.     

静电自组装方法合成的具有多孔三维网络结构的Fe3O4/石墨烯复合材料作为高性能锂离子电池负极材料

采用静电自组装方法,分两步合成Fe（OH）₃/GO前驱体（GO：氧化石墨烯）,再通过水热反应和600 ℃高纯氮气气氛下煅烧,获得了Fe₃O₄/石墨烯复合材料. 通过X射线衍射（XRD）、扫描电镜（SEM）、高分辨透射电镜（HRTEM）、拉曼（Raman）光谱等多种分析,发现该复合材料具有三维多孔石墨烯网络结构. 把合成的这种Fe₃O₄/石墨烯复合材料作为锂离子电池负极材料,电化学测试结果表明其具有优良的电化学性能：首次放电容量为1390 mAh·g^-1,50次循环后容量为819 mAh·g^-1. 通过对比实验表明,三维石墨烯网络结构的形成对复合材料的电化学循环稳定性起着关键作用.     

Immobilization of trypsin in polyaniline-coated nano-Fe3O4/carbon nanotube composite for protein digestion

In this report, a four-component nanocomposite, trypsin-immobilized polyaniline-coated Fe₃O₄/carbon nanotube composite, was synthesized for highly efficient protein digestion. Fe₃O₄ was deposited by the chemical coprecipitation of Fe²⁺ and Fe³⁺ in an alkaline solution containing carbon nanotubes (CNTs) to prepare nano-Fe₃O₄/CNT composite. Subsequently, polyaniline (PA) was assembled on the Fe₃O₄/CNT composite by the in situ polymerization of aniline in the presence of trypsin to obtain trypsin-immobilized PA/Fe₃O₄/CNT nanocomposite. The novel 1D superparamagnetic biomaterial has been characterized by TEM, SEM, XRD, and magnetometric analysis. The feasibility and performance of the unique magnetic biomaterial have been demonstrated by the tryptic digestion of bovine serum albumin, myoglobin, and lysozyme within 5 min. The digests were identified by MALDI-TOF MS with sequence coverages that were comparable to those obtained from the conventional in-solution tryptic digestion. The present biocomposite offers considerable promise for protein analysis due to its high magnetic responsivity and excellent dispersibility. It can be easily isolated from the digests with the aid of an external magnetic field. Because the enzyme-immobilized nanocomposite can be prepared by a simple two-step deposition approach at low cost, it may find a wide range of biological applications including proteome research.     

Fabrication of silane-modified magnetic nano sorbent for enhanced ultrasonic wave driven removal of methylene blue from aqueous media: Isotherms,kinetics, and thermodynamic mechanistic studies

In this study, we report a simple and economic one-pot synthesis of magnetite (Fe₃O₄) nanostructure and its modification with tetraethyl orthosilicate by coprecipitation method. The synthesized (Fe₃O₄@SiO₂) nano sorbent was applied for enhanced adsorptive removal of methylene blue by ultrasonic wave driven batch experiments. After successful synthesis, the nanostructure was characterized for their physical structure by FT-IR, VSM, TEM, and XRD. For the maximum adsorptive performance of nano sorbent, various parameters were optimized, such as dose, pH, time, concentration, and temperature. The adsorption mechanism was best fitted by Langmuir isotherm with a maximum capacity of 148.69 mg/g, while kinetics best fitted by pseudo-second-order kinetic. The synthesized nano sorbent was successfully applied for enhanced adsorptive removal of toxic methylene blue from aqueous media. The proposed method is promising and effective in terms of simplicity, cost operation, green energy consumption, reproducible, excellent reusability, and magnetically separability with fast kinetic.     

Electrochemical immunoassay of benzo[a]pyrene based on dual amplification strategy of electron-accelerated Fe3O4/polyaniline platform and multi-enzyme-functionalized carbon sphere label

An electrochemical immunosensor, basing on a dual amplification strategy by employing a biocompatible Fe₃O₄/polyaniline/Nafion (Fe₃O₄/PANI/Nafion) layer as sensor platform and multi-enzyme-antibody functionalized highly-carbonized spheres (multi-HRP-HCS-Ab₂) as label, was constructed for sensitive detection of benzo[a]pyrene (BaP). The stable film, Fe₃O₄/PANI/Nafion, can not only immobilize biomolecules, but also catalyze the reduction of hydrogen peroxide, indicating an accelerated electron transfer pathway of the platform. The experimental conditions, including the concentration of Nafion, concentration of Fe₃O₄/polyaniline (Fe₃O₄/PANI), pH of the detection solution and concentrations of biomolecules, were studied in detail. Basing on a competitive immunoassay, the current change was proportional to the logarithm of BaP concentration in the range of 8 pM and 2 nM with the detection limit of 4 pM. The proposed immunosensor exhibited acceptable reproducibility and stability. This new type of dual amplification strategy may provide potential applications for the detection of environmental pollutants.