Olive oil quantification of edible vegetable oil blends using triacylglycerols chromatographic fingerprints and chemometric tools

The present work studies the effectiveness of the use of triacylglycerols (TAGs) for the quantification of olive oil in blends with vegetable oils. The determinations were obtained using high-performance liquid chromatography (HPLC) coupled to a Charged Aerosol Detector (CAD), in combination with Partial Least Squares (PLS) regression and using interval PLS (iPLS) for variable selection.Results revealed that PLS models can predict olive oil concentrations with reasonable errors. Variable selection through iPLS did not improve predictions significantly, but revealed the chemical information important in the chromatogram to quantify olive oil in vegetable oil blends.     

Integration of Commercial Screen‐printed Electrodes into a Voltammetric Electronic Tongue for the Analysis of Aminothiols

A voltammetric sensor array (or electronic tongue) is developed for the simultaneous quantification of cysteine, glutathione and homocysteine without need of previous separation. It is based on the integration of three commercial screen‐printed electrodes (gold curated at high and low temperature and carbon modified with carbon nanotubes). Linear sweep voltammograms measured simultaneously by all three sensors are processed by Partial Least Squares (PLS) regression and different variables selection algorithms such as Genetic Algorithm and interval‐Partial Least Squares. The method was applied to synthetic mixtures and successfully validated, with correlation coefficients of prediction (R_p²) of 0.9542, 0.9429 and 0.9589 for cysteine, glutathione, and homocysteine respectively.     

Comparison of different calibration methods for the determination by FT-NIR spectroscopy of the hydroxyl number in polyester resins

Different calibration methods have been applied for the determination of the Hydroxyl Number in polyester resins, namely Partial Least Squares (PLS), Principal Component Regression (PCR), Ordinary Least Squares with selection of the variables by genetic algorithm (OLS-GEN) and back-propagation Artificial Neural Networks (BP-ANN). The predictive ability of the regression models was estimated by splitting the dataset in training and test sets by application of the Kohonen self-organising maps. The linear methods (OLS-GEN, PLS and PCR) showed comparable results while artificial neural networks provided the best results both in fitting and prediction.     

A partial least squares regression study with antioxidant flavonoid compounds

The quantitative structure-activity relationship of a set of 19 flavonoid compounds presenting antioxidant activity was studied by means of PLS (Partial Least Squares) regression. The optimization of the structures and calculation of electronic properties were done by using the semiempirical method AM1. A reliable model (r ²=0.806 and q ²=0.730) was obtained and from this model it was possible to consider some aspects of the structure of the flavonoid compounds studied that are related with their free radical scavenging ability. The quality of the PLS model obtained in this work indicates that it can be used in order to design new flavonoid compounds that present ability to scavenge free radicals.     

A testing of some dynamic kinetic equations

Artificial thermogravimetric data relating to the five possible types of mechanisms proposed by Sestak and Berggren were synthesized to test four dynamic kinetic methods: the Horowitz and Metzger, Freeman and Carroll, Coats and Redfern, and Linear Least Squares Fitting methods. It was found that the Linear Least Squares Fitting method is the most satisfactory.     

Application of FT-Raman Spectroscopy and Chemometric Analysis for Determination of Adulteration in Milk Powder

In this work, FT-Raman spectroscopy is explored as a rapid technique for the assessment of the milk powder quality. Based on information provided by Raman spectra of samples adulterated with starch and whey, a quantitative method is developed to identify the fraud, using Partial Least Squares regression (PLS). In regression models using PLS the results are satisfactory, and such models can be used to identify and quantify samples presenting whey and starch in milk powder at concentrations of 2.32% and 1.64% (w/w), respectively. In the whey determination, the obtained values in the PLS model of the new samples are compared with those obtained by the spectrophotometric method of acid ninhydrin. This result shows that there is no significant difference with the 95% level of confidence between the values provided by the PLS regression method and the acid ninhydrin. The present work shows Raman spectroscopy as an analytical tool which can be used in quality control of milk powder, even in fraud processes, and the calculated figures of merit such as sensitivity, accuracy, limit of detection and limit of quantification clearly demonstrate this potential use. Although the multivariate models developed are not strictly quantitative, especially for low concentrations, they can be used as screening methods for routine analysis, as showed by this work.     

Multivariate analysis of Cd(II), In(III), Tl(I) and Pb(II) in mixtures using square wave anodic stripping voltammetry

Accurate qualitative and quantitative results were obtained by the application of parameter estimation methods, viz. Classical Least Squares ;CLS', Inverse Least Squares ;ILS' and Kalman Filter ;KF' algorithms. These methods were used to separate strongly overlapping electrochemical peaks produced by binary, ternary and quaternary mixtures of traces of cited poisonous heavy metals stripped from the hanging mercury drop electrode in an acetate-bromide electrolyte using the square wave anodic stripping voltammetry. The analysis was achieved using a single standard addition, the concentrations studied were down to 50 nM and molar ratios up to 1:6 for binary mixtures. A statistical analysis of the results was reported. The method was applied for the ultratrace analysis of the cited cations in a sample of sodium hydrogen carbonate AR.     

Modelling the quality of enantiomeric separations using Mutual Information as an alternative variable selection technique

This paper uses Mutual Information as an alternative variable selection method for quantitative structure-property relationships data. To evaluate the performance of this criterion, the enantioselectivity of 67 molecules, in three different chiral stationary phases, is modelled. Partial Least Squares together with three commonly used variable selection techniques was evaluated and then compared with the results obtained when using Mutual Information together with Support Vector Machines. The results show not only that variable selection is a necessary step in quantitative structure-property relationship modelling, but also that Mutual Information associated with Support Vector Machines is a valuable alternative to Partial Least Squares together with correlation between the explanatory and the response variables or Genetic Algorithms. This study also demonstrates that by producing models that use a rather small set of variables the interpretation can be also be improved.     

Relationship between the Biodegradability and Structure of Polycyclic Aromatic Hydrocarbons

21 Physicochemical and quantum chemical parameters of 17 kinds of polycyclic aromatic hydrocarbons were calculated by using semi-empirical MOPAC AM1 method. By means of Partial Least Squares （PLS）, quantitative structure-biodegradation relationship （QSBR） study was performed with the logarithm of specific biodegradation rates （logKb）. The optimal model was obtained, and the result showed that the first-order molecular connectivity index （^1X）, the energy of the lowest unoccupied molecular orbital （Elumo）, logarithm of n-octyl alcohol/water partition coefficient （logP） and torsion energy （Et） are the dominant factors governing the biodegradability of polyeyelie aromatic hydrocarbons, and the effect of second-order valence molecular connectivity index （^2X^V）, the third-order valence molecular connectivity index （^3X^V） and molar refractivity （Rm） should not be ignored.     

Efficient use of pure component and interferent spectra in multivariate calibration

Partial Least Squares (PLS) is by far the most popular regression method for building multivariate calibration models for spectroscopic data. However, the success of the conventional PLS approach depends on the availability of a ‘representative data set’ as the model needs to be trained for all expected variation at the prediction stage. When the concentration of the known interferents and their correlation with the analyte of interest change in a fashion which is not covered in the calibration set, the predictive performance of inverse calibration approaches such as conventional PLS can deteriorate. This underscores the need for calibration methods that are capable of building multivariate calibration models which can be robustified against the unexpected variation in the concentrations and the correlations of the known interferents in the test set. Several methods incorporating ‘a priori’ information such as pure component spectra of the analyte of interest and/or the known interferents have been proposed to build more robust calibration models. In the present study, four such calibration techniques have been benchmarked on two data sets with respect to their predictive ability and robustness: Net Analyte Preprocessing (NAP), Improved Direct Calibration (IDC), Science Based Calibration (SBC) and Augmented Classical Least Squares (ACLS) Calibration. For both data sets, the alternative calibration techniques were found to give good prediction performance even when the interferent structure in the test set was different from the one in the calibration set. The best results were obtained by the ACLS model incorporating both the pure component spectra of the analyte of interest and the interferents, resulting in a reduction of the RMSEP by a factor 3 compared to conventional PLS for the situation when the test set had a different interferent structure than the one in the calibration set.     

Analysis of multiblock datasets using ComDim: Overview and extension to the analysis of (K + 1) datasets

ComDim analysis was designed to assess the relationships between individuals and variables within a multiblock setting where several variables, organized in blocks, are measured on the same individuals. An overview of this method is presented together with some of its properties. Furthermore, we discuss a new extension of the method of analysis to the case of (K+1) datasets. More precisely, the aim is to explore the relationships between a response dataset and K other datasets. An illustration of this latter strategy of analysis on the basis of a case study involving Time Domain ‐ Nuclear Magnetic Resonance data is outlined and the outcomes are compared with those of Multiblock Partial Least Squares regression.     

Comparison of Multicomponent Determination of Iprodione,Procymidone and Chlorothalonil by Partial Least Squares Modelling Using Spectrophotometric and High-Performance Liquid Chromatography Data

Abstract

A Partial Least Squares (PLS) calibration method was applied to the simultaneous determination of iprodione, procymidone and chlorothalonil in mixtures, by uv-vis absorption spectrophotometry and by high performance liquid chromatography (HPLC). Signals and first-derivative (¹D) signals were used to optimize the calibration matrices by the PLS-1 method. Quantitative results are presented for synthetic mixtures and for extracts from soil and groundwater samples. Significant improvements were achieved by using the PLS-1 method built with first-derivative chromatograms, in the determination of iprodione, procymidone and chlorothalonil in environmental samples.     

木薯品质分析的近红外光谱模型建立及其应用研究

应用近红外光谱法(NIRS)建立木薯中淀粉、水分定量分析的近红外光谱数学模型,探讨了修正偏最小二乘法(MPLS)、偏最小二乘法(PLS)以及主成分回归法(PCR)等优化处理对定标模型的影响,确定了修正偏最小二乘法(MPLS)是建立模型最适合的数学方法。并对模型预测结果的准确性进行了评价。结果表明:验证集样品的化学值和近红外预测值拟合存在较好的线性关系,相关性显著。淀粉模型预测标准偏差(Sep)为0.850,系统偏差(Bias)为-0.095,相关系数(r)为0.971。水分模型预测标准偏差(Sep)为0.075,系统偏差(Bias)为0.007,相关系数(r)为0.980。淀粉、水分定量分析的NIRS数学模型具有较高的预测准确性,可应用于木薯批量收购中的品质等分析。     

Feasibility study on the use of near infrared spectroscopy to determine flavanols in grape seeds

The potential of near infrared spectroscopy to determine the content of flavanols directly recording the infrared spectra of grape seeds has been evaluated. Moreover, the study shows the potential of this technique to obtain qualitative information related to the samples. In this case, the feasibility to discriminate between possible vineyards of origin has also been evaluated. Modified Partial Least Squares (MPLS) regression was used to develop the quantitative models in order to predict the content of flavanols. These models have been validated showing differences between 3.5% and 14.3% in the external validation. Moreover, Discriminant Partial Least Squares algorithm was used in the qualitative analysis to distinguish between two possible vineyards of origin and showed a high degree of accuracy. Prediction rates of samples correctly classified with a mean of 95% in internal validation and 97% in external validation were obtained. The procedure reported here seems to have an excellent potential for a fast and reasonably inexpensive analysis of these flavanols in grape seeds and could also be a tool to distinguish between possible vineyards of origin.     

Dual stacked partial least squares for analysis of near-infrared spectra

A new ensemble learning algorithm is presented for quantitative analysis of near-infrared spectra. The algorithm contains two steps of stacked regression and Partial Least Squares (PLS), termed Dual Stacked Partial Least Squares (DSPLS) algorithm. First, several sub-models were generated from the whole calibration set. The inner-stack step was implemented on sub-intervals of the spectrum. Then the outer-stack step was used to combine these sub-models. Several combination rules of the outer-stack step were analyzed for the proposed DSPLS algorithm. In addition, a novel selective weighting rule was also involved to select a subset of all available sub-models. Experiments on two public near-infrared datasets demonstrate that the proposed DSPLS with selective weighting rule provided superior prediction performance and outperformed the conventional PLS algorithm. Compared with the single model, the new ensemble model can provide more robust prediction result and can be considered an alternative choice for quantitative analytical applications.     

MATLAB语言在光谱定量分析中的应用

利用MATLAB语言实验紫外-可见吸收光谱法和近红外漫反射光谱法的定量分析数据的处理，着重阐述了偏最小二乘法的多元校正过程。该方法简便、实用，简化并优化了计算过程，效率高，数值稳定性好。     

茶叶浸出液中农药残留表面拉曼光谱检测与初步定量分析

选取甲基对硫磷和水胺硫磷为研究对象,改良了传统的QuEChERS前处理工艺,以自制纳米金溶胶为增强基底,利用表面增强拉曼光谱(SERS)技术,对茶叶浸出液中的农药残留进行检测。通过比对两种有机磷农药的拉曼特征峰进行定性分析。同时,选取570,1034,1107和1202 cm^-1等拉曼位移附近的特征峰光谱数据,利用微分等数学手段,结合偏最小二乘法(PLSR)建立回归方程,预测样品中农药残留含量。所得预测数值与气相色谱-质谱联用(GC-MS)法检测值对比,验证本方法的可行性与可信度。结果表明:基于SERS技术对上述两种有机磷农药的检出限可达0.05 mg/L;通过数学模型分析建立回归方程,其线性相关系数范围为0.9077~0.9824,预测均方根误差(RMSEP)范围为0.77%~2.68%;利用回归方程得到的预测值与GC-MS检测结果基本接近,相对误差范围-5.16%~9.03%,回收率为81.4%~115.1%,说明可以用SERS技术对茶叶浸出液中的有机磷农药残留进行定性和初步定量分析。     

Detection of antibiotic residues in bovine milk by a voltammetric electronic tongue system

A voltammetric electronic tongue (VE-tongue) was developed to detect antibiotic residues in bovine milk. Six antibiotics (Chloramphenicol, Erythromycin, Kanamycin sulfate, Neomycin sulfate, Streptomycin sulfate and Tetracycline HCl) spiked at four different concentration levels (0.5, 1, 1.5 and 2 maximum residue limits (MRLs)) were classified based on VE-tongue by two pattern recognition methods: principal component analysis (PCA) and discriminant function analysis (DFA). The VE-tongue was composed of five working electrodes (gold, silver, platinum, palladium, and titanium) positioned in a standard three-electrode configuration. The Multi-frequency large amplitude pulse voltammetry (MLAPV) which consisted of four segments (1 Hz, 10 Hz, 100 Hz and 1000 Hz) was applied as potential waveform. The six antibiotics at the MRLs could not be separated from bovine milk completely by PCA, but all the samples were demarcated clearly by DFA. Three regression models: Principal Component Regression Analysis (PCR), Partial Least Squares Regression (PLSR), and Least Squares-Support Vector Machines (LS-SVM) were used for concentrations of antibiotics prediction. All the regression models performed well, and PCR had the most stable results.