One-step, synthesis of Hantzsch esters and polyhydroquinoline derivatives in fluoro alcohols

Hantzsch 1,4-dihydropyridine, polyhydroquinoline and 1,8-dioxodecahydroacridines derivatives were synthesized in excellent yields in trifluoroethanol (TFE). The solvent (TFE) can be readily separated from reaction products and recovered in excellent purity for direct reuse.     

Synthesis of polyhydroquinoline derivatives through unsymmetric Hantzsch reaction using organocatalysts

A novel and green approach for efficient and rapid synthesis of polyhydroquinoline derivatives via unsymmetric Hantzsch reaction using organocatalysts at room temperature was reported. The process is a simple, environmentally friendly, rapid, and high yielding reaction for the synthesis of polyhydroquinoline derivatives. The catalytic efficiency of various small organocatalysts such as l-proline, trans-4-hydroxy-l-proline, l-thiaproline, dl-phenylglycine, and (−)-cinchonidine was studied under aqueous, organic, and solvent free conditions.     

Specific and selective reduction of aromatic nitrogen heterocycles with the bis-pyridine complexes of bis(1,4-dihydro-1-pyridyl)zinc and bis(1,4-dihydro-1-pyridyl)magnesium

Aromatic nitrogen heterocycles, e.g. quinoline, 2,2‘-bipyridyl and 1,10-phenanthroline, are reduced in a uniquely specific and selective way by the bispyridine complexes of bis(1,4-dihyro-1-pyridyl)zinc and bis(1,4-dihydro-1-pyridyl)magnesium. The reactions occur by hydrogen transfer from the metal-bound 1,4-dihydropyridyl moieties to the substrates and yield zinc or magnesium salts of the 1,4-dihydroazaaromatic derivatives. Upon hydrolysis, the 1,4-dihydroazaaromatic compounds are liberated from the metal ions. The isolation and purification of several of the (novel) reduced compounds, e.g. 1,4-dihydroquinoline and 1,4-dihydro-1,10-phenanthroline, are described.     

二氧化钛纳米粒子催化合成Hantzsch酯和多氢喹啉衍生物(英文)

1,4-Dihydropyridine and polyhydroquinoline derivatives have been prepared efficiently in a one-pot synthesis via Hantzsch condensation using nanosized titanium dioxide as a heterogeneous catalyst.The present methodology offers several advantages such as excellent yields,short reaction times (30-120 min),environmentally benign,and mild reaction conditions.The catalyst can be readily separated from the reaction products and recovered in excellent purity for direct reuse.     

PEG-Mediated Catalyst-Free Synthesis of Hantzsch 1,4-Dihydropyridines and Polyhydroquinoline Derivatives

Hantzsch 1,4-dihydropyridines and polyhydroquinoline derivatives were synthesized in good yields by PEG-mediated, catalyst–free synthesis under solvent-free conditions. The products were directly recrystallized from hot methanol. The reaction gave excellent yields with low- as well as high-molecular-weight polyethylene glycols.     

The Synthesis of Unusual Organic Molecules Using Cyclic Peroxides. New synthetic methods (3)

The photodecarboxylation of malonyl peroxides into α-lactones^[1] and the thermal conversion of the 1,4-endo-peroxide 4,5-epoxy-3,6-epidioxy-1-cyclohexene into the novel benzene trioxide^[2] are two recent examples of the potential of cyclic peroxides in the synthesis of unusual organic molecules. The former transformation entails a fragmentation, the latter a rearrangement process. Most reported examples fall into one of these two gross reaction types. Of the numerous examples that have been reported in the literature during the last two decades, only those shall be focused on that lead to unusual compounds or constitute efficient syntheses of known compounds, in order to stress the convenience of cyclic peroxides in the synthesis of organic compounds.     

Construction of Polyheterocyclic Compounds by Lewis Acid Mediated Intramolecular [3+2] Cycloaddition Reaction

An efficient domino approach has been developed for the synthesis of polyheterocyclic derivatives constituting pyrrole moiety. Lewis acid catalyzed reaction of 2-substituted-2-hydroxy-indane-1,3-diones and 1,4-benzoxazinone derivatives resulted in the formation of polyheterocyclic compounds under metal-free and mild conditions in good to excellent yield. The reaction is highly regioselective for C−C and C−N bond construction proceeded via intramolecular [3+2] cycloaddition reaction. The protocol is highly efficient, obviates column chromatography and the products are obtained by simple filtration followed by washing with solvent.     

One-Pot Synthesis of 1,4-Dihydropyridine and Polyhydroquinoline Derivatives via L-Proline Catalyzed Hantzsch Multicomponent Reaction under Ultrasound Irradiation

L‐Proline efficiently catalyzed the multi‐component Hantzsch reaction in EtOH at 60°C under ultrasound irradiation to afford the corresponding 1,4‐dihydropyridine and polyhydroquinoline derivatives in high yields. This method offers the advantages of neutral and mild reaction conditions, high to excellent yields of the products and simple workup.     

Cerium(Ⅳ) ammonium nitrate catalysed facile and efficient synthesis of polyhydroquinoline derivatives through Hantzsch multicomponent condensation

A general and convenient practical approach for the synthesis of polyhydroquinoline derivatives has been achieved via one-pot four-component Hantzsch condensation of aromatic aldehydes,dimedone,ethyl acetoacetate and ammonium acetate in the presence of a catalytic amount of cerium(Ⅳ) ammonium nitrate (CAN),in ethanol solvent at ambient temperature.Simple work-up,mild reaction conditions,inexpensive and non-toxic catalyst,and excellent product yields are the advantageous features of this method.     

无溶剂超声辐射下硝酸镱高效催化合成 1,4-二氢吡啶衍生物

在Yb(NO₃)₃催化下, 芳香醛、 5,5-二甲基-1,3-环己二酮、 乙酰乙酸乙酯和醋酸铵在室温无溶剂条件下经超声辐射一锅法合成了一系列1,4-二氢吡啶衍生物, 反应时间为15~35 min, 产率为86%~97%. 该方法具有条件温和、 反应时间短且产率高的优点. 催化剂Yb(NO₃)₃对环境友好且可循环使用, 为此类化合物的合成提供了一种有效的新方法.     

Rapid and efficient one-pot synthesis of 1,4-dihydropyridine and polyhydroquinoline derivatives through the Hantzsch four component condensation by zinc oxide

A one-pot four-component reaction of aldehydes, ethyl acetoacetate/5,5-dimethyl-1,3-cyclohexanedione, ethyl acetoacetate and ammonium acetate in the presence of 10 mol% of ZnO as a heterogeneous catalyst for the synthesis of corresponding 1,4- dihydropyridine and polyhydroquinoline derivatives via the Hantzsch condensation is described. The present methodology offers several advantages such as simple procedure, excellent yields, and short reaction time.     

[Emim][BF4]: An Efficient Green Protocol for the Synthesis of Bioactive 2‐(5‐(substituted)‐2,6‐dioxo‐1,2,5,6‐tetrahydropyrimidin‐4‐yl)‐2,3‐dihydrophthalazine‐1,4‐dione Derivatives

The present study is designed to synthesize the 2‐(5‐(substituted)‐2,6‐dioxo‐1,2,5,6‐tetrahydropyrimidin‐4‐yl)‐2,3‐dihydrophthalazine‐1,4‐diones and investigate their anticancer activity. This is the first example of the condensation reaction of a series of phthalhydrazide derivatives in ionic liquid. In this investigation, the titled compounds syntheses were carried out by simple and efficient three component coupling of phthalhydrazide, aldehydes, and barbituric acid in the presence of [Emim][BF₄] ionic liquid. This methodology was provided and promotes the higher product yields in shorter reaction times and mild reaction conditions. The title compounds were tested for their anticancer activity. Some of them were shown the significant cytotoxic activity against the selected cancer cell lines.     

Ionic Liquid as Catalyst and Reaction Medium: A Simple and Efficient Procedure for Paal–Knorr Furan Synthesis

The ionic liquid 1-butyl-3-methyl-imidazolium hydrogen sulfate, [bmim]HSO₄, efficiently catalyzes Paal–Knorr furan synthesis without any organic solvent. A wide range of aliphatic and aromatic 1,4-diketones easily undergo condensations to form furan derivatives, providing a general and convenient procedure. The Paal–Knorr reaction of ester-substituted 1,4-diketones is first reported. The ionic liquid can be recovered and reused for subsequent runs without any appreciable loss of efficiency.     

Some transformations of N-ethoxycarbonylmethylpyridinium bromides with a pyridyl or 1,4-dihydropyridyl substituent at position 3

The direction of the reaction of derivatives of N-ethoxycarbonylmethylpyridinium bromide with chalcone in the presence of bases depends on the substituent at position 3 of the pyridine ring. In the presence of a pyridyl substituent a derivative of 2,3-dihydroindolizine is formed. In the case of a 1,4-dihydropyridyl substituent cycloaddition does not occur, and a Michael addition product (an acyclic betaine) is formed. The latter can be transformed into a derivative of indolizine only under the conditions of decarboxylation.Latvian Institute of Organic Synthesis, Riga. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 202–211, February, 1997.     

Cerium（IV） ammonium nitrate catalysed facile and efficient synthesis of polyhydroquinoline derivatives through Hantzsch multicomponent condensation

A general and convenient practical approach for the synthesis of polyhydroquinoline derivatives has been achieved via one-pot four-component Hantzsch condensation of aromatic aldehydes, dimedone, ethyl acetoacetate and ammonium acetate in the presence of a catalytic amount of cerium（IV） ammonium nitrate （CAN）, in ethanol solvent at ambient temperature. Simple work-up, mild reaction conditions, inexpensive and non-toxic catalyst, and excellent product yields are the advantageous features of this method.     

Green Synthesis of Fused Imidazo[1,2‐a][1,8]naphthyridine Derivatives Catalyzed by DABCO under Solvent‐Free Solid‐State Conditions and Their Biological Evaluation

An efficient and eco‐friendly methodology has been developed for the construction of fused imidazo[1,2‐a][1,8]naphthyridine derivatives in the presence of 1,4‐diazabicyclo[2.2.2]octane, and involving various substituted heterocyclic amines with phenacyl bromide under solvent‐free solid‐state condition obtained the corresponding compounds ( 5a–g , 7a–f ) in short reaction time with high yield which is the important features of this protocol. All newly synthesized products were evaluated for their antibacterial and fungal activities. All these compounds displayed good antibacterial and antifungal activity. In predominantly, compounds 7e , 7d , and 5d demonstrate the highest antibacterial and antifungal activities. Furthermore, in silico molecular docking studies results were well complemented to the antimicrobial activity.     

Sulfonic acid–functionalized Wang resin (Wang-OSO3H) as polymeric acidic catalyst for the ecofriendly multicomponent synthesis of polyhydroquinolines via Hantzsch condensation

An efficient and green approach has been developed for the synthesis of polyhydroquinoline derivatives via Hantzsch condensation reaction directly from corresponding substituted aromatic and aliphatic aldehydes, β-keto compounds, active methylene compounds, and ammonium chloride using recyclable polymer-supported sulfonic acid catalyst under aqueous conditions. Environmental acceptability, operational simplicity, low cost, excellent functional group compatibility, and high yields are the important features of this protocol.     

Sucrose chelated auto combustion synthesis of BiFeO3 nanoparticles: Magnetically recoverable catalyst for the one‐pot synthesis of polyhydroquinoline

Sucrose chelated Bismuth ferrite (BiFeO₃) nanoparticles as a novel heterogeneous catalyst was synthesized by an auto combustion route. Different calcination temperatures (150 °C, 450 °C, 550 °C, 650 °C, 750 °C and 850 °C) have been employed to obtain single phased BiFeO₃ nanoparticles. The perovskite structure formation and disappearance of organic phase (sucrose) was obtained by Fourier transform infrared spectroscopy (FT‐IR). Phase determination and structural characterization was carried out by powder X‐ray diffraction (XRD). The magnetic properties were analyzed by vibrating sample magnetometer (VSM) whereas surface area/pore volume was obtained by Brunauer–Emmett–Teller (BET). Transmission electron microscope (TEM) analyzed the particles size and morphology. Thermal stability was investigated by thermogravimetric analysis (TGA) and determination of constituent elements was carried out by X‐ray Photo‐Electron Spectroscopy (XPS). Raman spectroscopy confirmed the perovskite structure of the synthesized materials. The BiFeO₃ nanoparticles so obtained were employed as heterogeneous catalyst for the synthesis of polyhydroquinoline derivatives. All the polyhydroquinoline derivatives were characterized by Fourier transform infrared spectroscopy (FT‐IR) and Nuclear magnetic resonance spectroscopy (¹H NMR). For the very first time ever we have used BiFeO₃ as a recyclable magnetic nanocatalyst in the one‐pot four component cyclization reaction of benzaldehyde, ethylacetoacetate/methylacetoacetate, dimedone/cyclohexane‐1,3‐dione, and ammonium acetate for the synthesis of polyhydroquinoline derivatives without solvent under refluxing conditions to provide excellent yields of products. BiFeO₃ nanocatalyst (without any functionalization/surface coatings) shows easy magnetic separation, recyclability, reusability along with excellent yield of polyhydroquinoline derivatives in an economic and benign way.     

Disiloxane-protected 2-deoxyribonolactone as an efficient precursor to 1,2-dideoxy-1-beta-aryl-D-ribofuranoses

[formula: see text] Aryl C-nucleosides are analogues of natural nucleosides where the bases have been replaced with aromatic moieties. Work herein describes the highly stereoselective syntheses of non-hydrogen-bonding carbocyclic derivatives using a disiloxane-protected 2-deoxy-D-ribono-1,4-lactone as a stable and readily accessible starting material. Unlike the bis(TBDMS)-protected congener, this compound enables the use of sterically congested ortho-substituted aryllithium reagents in the initial addition reaction.     

(NH4)2.5H0.5PW12O40-catalyzed rapid and efficient one-pot synthesis of dihydropyridines via the Hantzsch reaction under solvent-free conditions

A heterogeneous reaction with the ammonium salt of 12-tungstophosphoric acid as catalyst has been designed for synthesis of 1,4-dihydropyridine and polyhydroquinoline via the Hantzsch condensation. Molten tetrabutylammonium bromide ionic liquid was used as reaction medium.