Anion-selective properties of alkali metal-free lead phosphate glasses containing silver chloride and their application in an ion-selective electrode

Alkali-free lead phosphate glasses containing silver chloride have been developed for anion responsive sensors. From measurements of the final glass compositions by electron probe microanalysis, it became clear that some of chloride ions in the glass bulk were not volatilized during the glass melting process. Compared with phosphate glasses containing silver oxide, the new glass electrodes containing silver chloride could respond more rapidly, although the response behaviour for anionic species were similar. From the electrode potential vs. time curve for the anionic species, the potential rapidly reached equilibrium when these concentrations varied from 10^?5 to 10^?2 M. The response times, t₉₅, to thiocyanate of the new glass electrode and the phosphate glass electrode containing silver oxide were 30 and 110 s, respectively. Moreover, the response time required for an initial potential change with a concentration jump of thiocyanate with the new glass electrode was found to be independent of the membrane thickness within about 2 mm and of the measuring temperature between 15 and 40°C. It is concluded that the diffusion process of species such as silver ion in the glass bulk does not take part in the initial part of the response behaviour.     

Mediated amperometric biosensor for hypoxanthine based on a hydroxymethylferrocene-modified carbon paste electrode

An amperometric enzyme electrode for the determination of hypoxanthine in fish meat is described. The hypoxanthine sensor was prepared from xanthine oxidase immobilized by covalent binding to cellulose triacetate and a carbon paste electrode containing hydroxymethylferrocene. The xanthine oxidase membrane was retained behind a dialysis membrane at a carbon paste electrode. The sensor showed a current response to hypoxanthine due to the bioelectrocatalytic oxidation of hypoxanthine, in which hydroxymethyiferrocene served as an electron-transfer mediator. The limit of detection is 6 × 10^?7 M, the relative standard deviation is 2.8% (n=28) and the response is linear up to 7 × 10^?4 M. The sensor responded rapidly to a low hypoxanthine concentration (7 × 10^?4 M), the steady-state current response being achieved in less than 1 min, and was stable for more than 30 days at 5 ° C. Results for tuna samples showed good agreement with the value determined by the conventional method.     

Electrical and positron annihilation study on epoxy and epoxy acrylate composites

Epoxy acrylate resin was prepared by endcapping the acrylic acid to epoxy resin backbone in the presence of triphenyl phosphene as catalyst. The structure was elucidated by IR and NMR spectroscopy. Epoxy and epoxy acrylate composites were prepared by mixing different concentrations of mica, magnesium hydroxide and calcium silicate with each epoxy/hardener and epoxy acrylate/styrene mixtures, respectively. The permittivity ε′, dielectric loss ε′′ and loss tangent tan δ were measured for these composites in the frequency range (10²-10⁶ Hz) and at 30 °C. The data obtained were analyzed into two absorption regions related to Maxwell-Wagner effect and to some local molecular motions rather than the main chain motion. The higher values of ε′ and the lower values of tan δ given for the composites containing the epoxy acrylate resin indicate some improvement in the dielectric properties when compared with those containing the epoxy resin. The effect of filler type and filler content on the positron annihilation lifetime and its intensity as well as S-parameter for epoxy and epoxy acrylate composites were also studied. The high values of S-parameter noticed by with increasing filler content indicates some increase in free electrons which lead to an increase in electrical conductivity. The highest value of hardness was obtained in the case of calcium silicate followed by mica and magnesium hydroxide.     

Thermosensitive superabsorbents based on poly(N,N-diethylacrylamide-co-sodium acrylate)

A series of poly(N,N-diethylacrylamide-co-sodium acrylate) with a degree of crosslinking of 1 mol%have been prepared as thermosensitive superabsorbents for water.The critical swelling temperatures or the volume phase transition temperature(VPTT) and the water absorption capacity of the polymers can be modulated by varying the amount of sodium acrylate(0-60 mol%) in the copolymers.The water absorption and swelling properties of the different hydrogels have been studied as function of temperature.The crosslinked copolymers can absorb large amounts of water at ambient temperatures and dehydrate at higher temperatures with relative ease,making the absorbent materials thermally responsive and thus reusable.The water absorption capacity of the copolymers depends on the pH of the media as the acrylate monomer has a higher water absorption in its deprotonated state.Added urea in the media raises and sharpens the VPTT values of the copolymers containing sodium acrylate.     

Solid-state reference electrodes based on carbon nanotubes and polyacrylate membranes

A novel potentiometric solid-state reference electrode containing single-walled carbon nanotubes as the transducer layer between a polyacrylate membrane and the conductor is reported here. Single-walled carbon nanotubes act as an efficient transducer of the constant potentiometric signal originating from the reference membrane containing the Ag/AgCl/Cl⁻ ions system, and they are needed to obtain a stable reference potentiometric signal. Furthermore, we have taken advantage of the light insensitivity of single-walled carbon nanotubes to improve the analytical performance characteristics of previously reported solid-state reference electrodes. Four different polyacrylate polymers have been selected in order to identify the most efficient reservoir for the Ag/AgCl system. Finally, two different arrangements have been assessed: (1) a solid-state reference electrode using photo-polymerised n-butyl acrylate polymer and (2) a thermo-polymerised methyl methacrylate:n-butyl acrylate (1:10) polymer. The sensitivity to various salts, pH and light, as well as time of response and stability, has been tested: the best results were obtained using single-walled carbon nanotubes and photo-polymerised n-butyl acrylate polymer. Water transport plays an important role in the potentiometric performance of acrylate membranes, so a new screening test method has been developed to qualitatively assess the difference in water percolation between the polyacrylic membranes studied. The results presented here open the way for the true miniaturisation of potentiometric systems using the excellent properties of single-walled carbon nanotubes.     

Synthesis of Mono- and Tetraalkylamide Derivatives of <Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">tert</Emphasis>-Butylthiacalix[4]arene

Mono- and tetrasubstituted derivatives of p-tert-butylthiacalix[4]arene containing acrylate and acrylamide fragments are synthesized for the first time. The Michael aza-addition of benzylamine to the synthesized acrylamide and acrylate thiacalixarene derivatives is studied.     

Synthesis of core-shell polymer microspheres by two-stage distillation-precipitation polymerization

Narrow- or monodisperse core-shell polymer microspheres with a dense core and a lightly crosslinked shell with different functional groups, such as ester, hydroxyl, cyano, were prepared by two-stage distillation-precipitation polymerization without any stabilizer. Commercial divinylbenzene (DVB), containing 80% of DVB was polymerized by distillation-precipitation polymerization with 2,2′-azobis(2-methyl propionitrile) (AIBN) as initiator in neat acetonitrile in the absence of any stabilizer as the first stage polymerization and used as the core. When the conversion of DVB was about 35% in the first stage, the second-comonomers with different functional groups, such as methyl methacrylate (MMA), ethyl methacrylate (EMA), butyl methacrylate (BMA), 2-hydroxyethyl methacrylate (HEMA), i-octyl acrylate (i-OA), dodecyl acrylate (DA), methyl acrylate (MA), ethyl acrylate (EA), ethylene glycol dimethacrylate (EGDMA), triethyleneglycol dimethacrylate (TEGDMA), trimethylolpropane trimethacrylate (Trim), and acrylnitrile (AN) together with AIBN were introduced, respectively, into the reaction system and copolymerized with unreacted DVB on the core surface to form a lightly crosslinked functional shell. The resulting core-shell polymer particles were characterized with scanning electron microscopy (SEM) and FT-IR spectra.     

Influence of crosslinker and ionic comonomer concentration on glass transition and demixing/mixing transition of copolymers poly(N-isopropylacrylamide) and poly(sodium acrylate) hydrogels

Hydrogels based on N-isopropylacrylamide and sodium acrylate as ionic comonomer were synthesized by free radical polymerization in water using N,N′-methylenebisacrylamide as crosslinker and ammonium persulfate as initiator. The glass transition of dried copolymers poly(N-isopropylacrylamide) (PNIPA) and poly(sodium acrylate) (SA) gels and demixing/mixing transition of PNIPA-SA hydrogels swollen with increasing amounts of water were studied using conventional differential scanning calorimetry. In the crosslinked polymers, the glass transition linearly increases, and the transition range becomes broader, with increasing crosslinker content. Increasing content of ionic comonomer also produces an increase of glass transition temperature, which moves to higher temperatures with higher sodium acrylate fraction. The influence of chemical structure of PNIPA-SA hydrogels on the lower critical solution temperature (LCST) of PNIPA-SA/water mixtures during heating and cooling was quantified as function of the content of the crosslinker and the ionic comonomer, as well as water content of the hydrogel in the range from 95 to 70 wt%. At parity of water content, the LCST occurs at higher temperatures for gels containing higher amounts of sodium acrylate. Similarly, the introduction of N,N′-methylenebisacrylamide causes an increase of the LCST, which grows with increasing of crosslinking degree of the hydrogel.     

Synthesis of amphiphilic block copolymer from optically active N-benzylprolinol acrylate

A vinyl monomer N-benzylprolinol acrylate has been synthesized from the available amino acid enantiomer L-proline via four stages. An optically active amphiphilic block copolymer capable of phase microsegregation in aqueous solutions has been synthesized through controlled free-radial polymerization of this monomer using poly(ethylene oxide) containing terminal 2-bromoisobutyrate groups as a macroinitiator.     

Three component ketocoumarin, amine, maleimide photoinitiator II

Three component photoinitiator systems containing N-substituted maleimide/ketocoumarin/tertiary amine have been used for the visible light photopolymerization of acrylate and thiol-ene monomers. Thin-film calorimetry studies were conducted. The polymerization exotherms of these systems with the blue (470 nm) and cyan (505 nm) LED light sources show that the multicomponent initiator package is an effective system for visible light polymerization of acrylate and thiol-ene monomers. Exotherms of a visible light initiator combination of camphorquinone/amine were recorded for comparison purposes.     

Silica hybrid material containing Pd-NHC complex as heterogeneous catalyst for Mizoroki-Heck reactions

A silica hybrid material containing palladium-N-heterocyclic carbene complexes was prepared by the sol-gel transformation of a molecular triethoxysilylated Pd-NHC complex. The material showed high activity as heterogeneous catalyst in Mizoroki-Heck reaction of aryl bromides and -iodides with styrene and methyl acrylate and could be re-used in at least five reaction cycles with unchanged catalytic properties.     

Effect of annealing on self-organized gradient film obtained from poly(3-[tris(trimethylsilyloxy)silyl] propyl methacrylate-co-methyl methacrylate)/poly(methyl methacrylate-co-n-butyl acrylate) blend latexes

The effect of annealing on the self-organized morphology and component gradient distribution of films prepared from bimodal latexes blend containing 1:1 silicon-containing acrylate copolymer/silicon-free acrylate copolymer blend was studied using attenuated total reflectance–Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy with X-ray energy-dispersive (SEM-EDX) spectrometry, and atomic force microscopy (AFM). The distribution of silicon through the whole thickness of the film as a function of annealing was investigated using confocal Raman spectroscopy (CRS). AFM results show that poly(methyl methacrylate-co-n-butyl acrylate) latex fuses to form a continuous film at 25?°C. The wettability of the acrylate components and the heterogeneous composition of poly(3-[tris(trimethylsilyloxy)silyl] propyl methacrylate-co-methyl methacrylate) result in a graded block film. ATR-FTIR and SEM-EDX measurements reveal silicon-containing components segregate at the film–air interface upon annealing. CRS further shows that the nonlinear model gradient distribution of silicon is obtained, where the content of silicon component is enhanced and it gradually varies in the bulk. When the annealing temperature increases to 120 and 180?°C, blend latexes films demonstrate varying topography and phase images, indicating phase separation is induced by annealing. Furthermore, CRS implies that the destruction of the gradient structure is attributed to the phase separation of the two blend components.     

Thermal degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers

Vinylidene chloride polymers containing comonomer units capable of consuming evolved hydrogen chloride to expose good radical-scavenging sites might be expected to display greater thermal stability than similar polymers containing simple alkyl acrylates as comonomer. Incorporation of a comonomer containing the phenyl t-butyl carbonate moiety into a vinylidene chloride polymer has the potential to afford a polymer with pendant groups which might interact with hydrogen chloride to expose phenolic groups. Copolymers of vinylidene chloride with [4-(t-butoxycarbonyloxy)phenyl]methyl acrylate have been prepared, characterized, and subjected to thermal degradation. The degradation has been characterized by thermal and spectroscopic techniques. The degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers is much more facile than the same process for similar copolymers containing either [4-(isobutoxycarbonyloxy)phenyl]methyl acrylate or methyl acrylate, a simple alkyl acrylate, as comonomer. During copolymer degradation, [4-(t-butoxycarbonyloxy) phenylmethyl acrylate units are apparently converted to acrylic acid units by extensive fragmentation of the sidechain. Thus, the phenyl t-butyl carbonate moiety does function as a labile acid-sensitive pendant group but its decomposition in this instance leads to the generation of a phenoxybenzyl carboxylate capable of further fragmentation.     

Adding Plasticizer Dispersible Conducting Polymer to the Ion-selective Membrane Composition – Revitalizing Single Piece Ion-selective Electrodes Concept

Typically, ion-selective electrodes used in current triggered electrochemical sensing apply a conducting polymer layer covered with an ion-selective membrane. In this work we propose an ion-selective membrane containing a dispersed conducting polymer. Thus obtained system allows elimination of the Achilles hell of heterogeneous ion-selective membranes containing solid particulates dispersed within the ion-selective polymeric membrane. The herein proposed system, even for high conducting polymer loading equal to 5 % w/w, is characterized with insensitivity towards redox interferences, as well as potentiometric detection limits, selectivity well comparable with that for other ion-selective electrodes constructions. Under voltammetric conditions, with increasing loading of the conducting polymer in the membrane cathodic peak potentials are shifted towards more negative values, yet the linear dependence of the peak potential on logarithm of concentration of the analyte in the solution is preserved.     

Sulfonamides as ionophores for ion-selective electrodes. II. Macrocyclic ligands containing two sulfonamide groups as ionophores

Ten macrocyclic compounds (1–10), each containing two sulfonamide groups have been incorporated into PVC membrane electrodes as ionophores. Their selectivity towards alkali and alkaline earth metal cations has been studied and compared to selectivities found in cation transport experiments.     

New Macrocycles Containing the Azoxy Subunit and Their Properties

Abstract

A new macroring closure reaction leading to crown-like macrocycles containing the azoxy group as a new macroring subunit has been introduced. The possibility of complex formation with cations has been examined by studying these compounds in membrane ion-selective electrodes.     

Optical determination of ionophore diffusion coefficients in plasticized poly(vinyl chloride) sensing films

The knowledge of accurate diffusion coefficients of electrically neutral ionophores in solvent polymeric membranes is important in view of understanding and optimizing important sensor characteristics of ion-selective electrodes (ISEs) and their corresponding optical sensors. A spectroscopic imaging technique is introduced here to determine the diffusion coefficient of the chromoionophore (N,N-diethyl-5-(octadecanoylimino)-5H-benzo[a]phenoxazine-9-amine, ETH 5294) in solvent polymeric membranes with different types of plasticizers and varying polymer-plasticizer ratio. This method is based on following the changes in the absorbance profiles of the chromoionophore as a function of space and time. The desired membrane composition is solvent cast onto a glass slide and placed under a microscope objective. The membrane is then exposed to light from a mercury arc lamp which photobleaches the dye in a circular area, providing an interface from which the time rate of absorbance change is studied. Spectral images are acquired over fixed time intervals with a microscope equipped with a charge-coupled device (CCD) camera providing 0.41 μm nominal resolution. Two plasticizers, ortho-nitrophenyl octyl ether (o-NPOE) and bis(2-ethylhexyl) sebacate (DOS), are examined in poly(vinyl chloride) (PVC) by varying the ratio of polymer to plasticizer content and measuring the diffusion coefficient of the chromoionophore. Corresponding membrane compositions containing 10 wt.% of an inert lipophilic salt (ETH 500) are also examined. Near linear relationships between the logarithmic diffusion coefficients and the PVC content are observed that obey the following relationships: -0.0459 wt.% PVC (for PVC-DOS), -0.0468 wt.% PVC (for PVC-DOS-ETH 500), -0.0508 wt.% PVC (for PVC-NPOE), -0.0473 wt.% PVC (for PVC-NPOE-ETH 500).     

A facile synthesis of bifunctional phospholipids for biomimetic membrane engineering

We report a facile synthesis of bifunctional phospholipid conjugates by acylation of N-protected lyso-phosphatidylethanolamine with 12-acryloxy-1-dodecanoic acid and followed with deprotection and conjugation with biotin, FITC, Texas Red, or EMC groups. The lipid conjugates can be used to generate a multifunctional substrate-supported phospholipid membrane via bioconjugation reaction to biotin or covalent attachment to EMC at their hydrophilic terminus. In addition, conjugation to fluorophores, FITC or Texas Red, provides a convenient mechanism to monitor lipid membrane formation and stability. Significantly, in situ photopolymerization of the acrylate group at the end of one of two hydrophobic alkyl chains stabilizes the phospholipid membrane.     

All-solid-state planar miniature ion-selective chloride electrode

All-solid-state ion-selective electrodes with plastic membrane (poly(vinyl chloride) (PVC), bis(2-ethylhexyl) sebacate (DOS), methyltri-n-tetradecylammonium chloride (MTTACl)), a conducting poly(pyrrole) (PPy) film doped either with chloride ions (PPyCl) or hexacyanoferrate(II) ions (PPyFeCN), and glassy carbon (GC) or screen-printed graphite layer (S-PG) as an inner electric contact were investigated. All the electrodes show close to Nernstian response, but their lifetimes vary. The at least 2-months lifetime of screen-printed electrodes is only achieved for the electrodes containing PPyFeCN (cation-exchanging film). Shorter lifetime of other screen-printed electrodes, i.e. without PPy, or with PPyCl (anion-exchanging film), was attributed to the diffusion of anionic products of the hydrolysis of organic components of the graphite paste used to prepare the electric contact. The properties of miniature, screen-printed electrodes comprising PPyFeCN solid contact, were comparable to those ion-selective electrodes with PPy solid contact (regardless the ion-exchanging characteristic of the polymer) deposited on GC electric contact.     

A cerium(III) selective polyvinyl chloride membrane sensor based on a Schiff base complex of N,N'-bis[2-(salicylideneamino)ethyl]ethane-1,2-diamine

A polyvinyl chloride (PVC) based membrane sensor for cerium ions was prepared by employing N,N′-bis[2-(salicylideneamino)ethyl]ethane-1,2-diamine as an ionophore, oleic acid (OA) as anion excluder and o-nitrophenyloctyl ether (o-NPOE) as plasticizer. The plasticized membrane sensor exhibits a Nernstian response for Ce(III) ions over a wide concentration range (1.41 × 10⁻⁷ to 1.0 × 10⁻² M) with a limit of detection as low as 8.91 × 10⁻⁸ M. It has a fast response time (<10 s) and can be used for 4 months. The sensor revealed a very good selectivity with respect to common alkali, alkaline earth and heavy metal ions. The response of the proposed sensor is independent of pH between 3.0 and 8.0. It was used as an indicator electrode in potentiometric titration of fluoride, carbonate and oxalate anions and determination of cerium in simulated mixtures.