大剪切电子散斑干涉的载频调制与位移场测量

将电子散斑干涉场的载波调制引入到大剪切电子散斑干涉中,通过对参考物的微小偏转引入载波条纹;利用傅里叶变换法,解调出了变形场的相位,从而实现了物体变形场的精确测量。讨论了大剪切载频的调制机理,理论分析表明,调制条纹的空间频率与参考面偏转的角度成正比;因此,控制参考面的偏转角度可实现不同位移量系统的调制。利用中心加载周边固定圆盘进行了典型实验,实验结果证明在大剪切电子散斑干涉技术中可以通过参考面的旋转高质量地实现电子散斑干涉条纹的调制,求解位移场。该系统具有系统简单,不需要专门引入参考光,条纹质量好等优点。该技术可扩展电子散斑干涉的应用范围,有一定的实际应用价值。     

Mechanical characterization of unplasticised polyvinylchloride thick pipes by optical methods

In this work a number of techniques (electronic speckle pattern interferometry, holographic interferometry, strain gauge and finite element method) are brought to bear in order to establish consistency in the results of strain measurement. This is necessary if optical non-destructive testing methods, such as those used here, are to gain acceptance for routine industrial use. The FE model provides a useful check. Furthermore, ESPI fringe data facilitates the extension of FE models, an approach that is of growing importance in component testing.

The use of in-plane and out-of-plane sensitive electronic speckle pattern interferometry (ESPI) for non-destructive material characterization of thick unplasticised polyvinylchloride (uPVC) pipes is presented. A test rig has been designed for stressing pipes by internal pressure. ESPI gives a complete mapping of the displacement field over the area imaged by the video camera. The results for the strain of uPVC obtained from ESPI data and from strain gauges are in good agreement. The value of Young's modulus has been obtained from the fringe data and compared with results obtained using holographic interferometry and from strain gauge measurements. The FE model also produces fringe data that is consistent with the ESPI results.     

Evaluation of a method to determine interferometric phase derivatives

A recently published method for the determination of phase derivatives maps by direct manipulation of three or more phase-shifted interferograms is tested for accuracy. The method is evaluated on computer-simulated holographic and electronic speckle pattern interferometry fringes and the results are assesed through the calculation of two comparative parameters: the relative image difference and the linear correlation coefficient. It is shown that errors in the phase derivative strongly depend on the filtering method used for smoothing the fringe patterns. An experimentally recorded ESPI fringe pattern is used to confirm the predictions of the numerical simulations.     

热传导方程在散斑条纹图相位提取中的应用

去除电子散斑十涉条纹图中的噪声是提取条纹图相位的关键问题.利用热传导方程去除条纹图中的噪声,定性和定量分析了该方法的滤波性能.在此基础上,进一步将MBO算法和热传导方程应用于条纹二值化和相位图平滑过程中,并成功地从单幅模拟条纹图中提取了条纹图的相位.研究结果表明,热传导方程能有效减少散斑条纹图中的噪声,改善二值条纹图的边界.进而获得准确的相位分布.     

A novel method to obtain electronic speckle pattern interferometry fringe patterns with high contrast

Traditional speckle fringe patterns of electronic speckle pattern interferometry （ESPI） are obtained by adding, subtracting, or multiplying the speckle patterns recorded before and after the deformation. However, these speckle fringe patterns are of limited visibility, especially for addition and multiplication fringe patterns. We propose a novel method to obtain speckle fringe patterns of ESPI from undeformed and deformed speckle patterns. The fringe pattern generated by our method is of high contrast and has better quality than subtraction fringe. The new method is simple and does not require more computational effort. The proposed method is tested on the experimentally obtained undeformed and deformed speckle patterns. The experimental results illustrate the performance of this approach.     

基于迈克尔逊干涉的傅里叶变换散斑形貌测量技术

提出了电子散斑干涉载频调制测量物体形貌的方法。采用典型的迈克尔逊干涉光路,将物体偏转一微小角度（等效为物面与参考面间形成空气楔）产生等厚干涉,可在物体的表面引入包含物体高度信息的载波干涉条纹。用CCD采集该载波条纹图,利用傅里叶变换法可解调出物体高度的位相信息,从而实现物体的形貌测量。介绍了电子散斑干涉载频调制测量物体形貌的原理,并进行了实物测量,给出了实验结果。由于该方法采用散斑干涉方法测量物体形貌,所以具有灵敏度高的优点。     

Variational denoising method for electronic speckle pattern interferometry

Traditional speckle fringe patterns by electronic speckle pattern interferometry (ESPI) are inherently noisy and of limited visibility, so denoising is the key problem in ESPI. We present the variational denoising method for ESPI. This method transforms the image denosing to minimizing an appropriate penalized energy function and solving a partial differential equation. We test the proposed method on computer-simulated and experimental speckle correlation fringes, respectively. The results show that this technique is capable of significantly improving the quality of fringe patterns. It works well as a pre-processing for the fringe patterns by ESPI.     

The separation of out-of-plane displacement from in-plane components by fringe carrier method based on large image-shearing ESPI

A fringe carrier method for separating out-of-plane displacement from in-plane components based on large image-shearing electronic speckle pattern interferometry (ESPI) is presented. If the test object is respectively illuminated by two expanded symmetric illuminations in large image-shearing ESPI, two interferometers are formed. Carrier fringe patterns can be introduced by tilting reference surface a small angle. The carrier fringe patterns are demodulated after deformation of the object. Two phase maps, which include out-of-plane and in-plane displacement, can be obtained by using Fourier transform. Then out-of-plane displacement can be easily separated from in-plane displacement by simple operation between two unwrapped phase distributions. The principle of spatial carrier frequency modulation in large image-shearing ESPI is discussed. A typical three-point-bending experiment is completed. Experimental results are offered. The results show that the method offers high visibility of carrier fringes. And the system presented does not need a special beam as a reference light and has simple optical setup.     

散斑条纹图的自适应窗口滤波方法

针对散斑噪声很难用常用的滤波方法进行滤除,在已有等值线滤波方法的基础上,提出一种更优的自适应窗口滤波方法。由于等值线窗口是在条纹方向图的基础上得到的,深入研究条纹方向的求取方法,提出了一种更为可靠的条纹方向求取算法,在得到高精度条纹方向的同时,还能估计出条纹的密度。使用等值线窗口技术,保持了窗口形状的自适应能力,然后利用对条纹密度的估计,根据条纹的宽度来确定滤波窗口的大小,实现了滤波窗口大小的自适应。最后,根据条纹方向和滤波后的图像可以直接得到条纹密度变化较大的单幅散斑图的相位结果。     

基于图切割的相位展开

剪切散斑干涉术中,普遍采取相移法提取相位,只可得到被包裹的相位信息,进一步量化计算之前,必须展开相位,但是大量的散斑噪音使相位展开变得非常困难.本文提出基于图切割理论的相位展开算法,将相位展开等价于整数的最优估计问题,通过最小化能量函数展开相位,无需对散斑包裹相位图进行滤波,就可以从包含大量散斑噪音的包裹相位图中准确地提取出真实相位,极大程度地保留了相位包裹图中的细节信息.对于同一幅模拟的散斑包裹相位图,传统的质量导向枝切法和最小二乘法的均方根误差分别为11.7076和4.9775,新算法的均方根误差则为0.9459,数值模拟与实验结果均验证了新算法优良的抗噪性能.     

Electronic speckle-pattern interferometer using holographic optical elements for vibration measurements

We report a simple, compact electronic speckle-pattern interferometer (ESPI) incorporating holographic optical elements (HOEs) for the study of out-of-plane vibration. Reflection and transmission HOEs provide reference and object beams in the interferometer. The alignment difficulties with conventional ESPI systems are minimized using HOEs. The time-average ESPI subtraction method is used to generate the fringe pattern and remove background speckle noise by introducing a phase shift between consecutive images. The amplitude and phase maps are obtained using path-difference modulation.     

基于图切割的相位展开

剪切散斑干涉术中,普遍采取相移法提取相位,只可得到被包裹的相位信息,进一步量化计算之前,必须展开相位,但是大量的散斑噪音使相位展开变得非常困难.本文提出基于图切割理论的相位展开算法,将相位展开等价于整数的最优估计问题,通过最小化能量函数展开相位,无需对散斑包裹相位图进行滤波,就可以从包含大量散斑噪音的包裹相位图中准确地提取出真实相位,极大程度地保留了相位包裹图中的细节信息.对于同一幅模拟的散斑包裹相位图,传统的质量导向枝切法和最小二乘法的均方根误差分别为11.707 6和4.977 5,新算法的均方根误差则为0.945 9,数值模拟与实验结果均验证了新算法优良的抗噪性能.     

Determination of skeleton and sign map for phase obtaining from a single ESPI image

A robust method of determining the sign map and skeletons for ESPI images is introduced in this paper. ESPI images have high speckle noise which makes it difficult to obtain the fringe information, especially from a single image. To overcome the effects of high speckle noise, local directional computing windows are designed according to the fringe directions. Then by calculating the gradients from the filtered image in directional windows, sign map and good skeletons can be determined robustly. Based on the sign map, single image phase-extracting methods such as quadrature transform can be improved. And based on skeletons, fringe phases can be obtained directly by normalization methods. Experiments show that this new method is robust and effective for extracting phase from a single ESPI fringe image.     

Batch skeleton extraction from ESPI fringe patterns using pix2pix conditional generative adversarial network

Optical Review - The key to measurement by electronic speckle pattern interferometry (ESPI) is to obtain accurate phase information from the ESPI fringe patterns. We propose a fast batch skeleton...     

基于改进旋滤波的电子散斑干涉图滤波方法

电子散斑干涉术条纹图在成像时不可避免地受散斑噪声调制,去除噪声是散斑干涉条纹处理的一项重要任务。利用散斑条纹图的方向性,提出一种基于模糊方向的旋滤波:在当前点的领域内定义4个模糊方向窗口,将传统旋滤波的一维、精确方向窗口的确定,转变为模糊方向窗口的确定;在确定的窗口内进行低通滤波时,采用自适应加权均值滤波代替传统的中值滤波。利用该方法分别处理模拟散斑条纹图和实验所得的真实条纹图,并与传统旋滤波、双边滤波和小波丢弃子带方法比较。实验结果表明,该改进算法在滤除散斑条纹图噪声的同时,有效保护了条纹的细节信息。     

Low-frequency harmonic vibration analysis with temporal speckle pattern interferometry

In this paper, the time sequence phase method (TSPM) has been applied to measure the displacement caused by low-frequency vibration in temporal speckle pattern interferometry (TSPI). The principle is that by capturing the temporal speckle patterns related to the object vibration, the whole-field displacement responses (amplitude and phase) of the vibrating object can be calculated through scanning these fluctuations. Thus, quantitative measurement can be carried out using a conventional ESPI system without a camera synchronized to the object vibration or a phase shifting system. The elaboration on the method is given and experimental results are presented.     

散斑干涉相位条纹图的频域滤波处理

为了解决在数字散斑干涉技术测量时,散斑干涉相位条纹图像中大量噪声对相位解包裹结果和精度产生严重影响的问题,介绍了一种条纹正余弦分解和频域低通滤波结合的方法,实现了散斑干涉相位条纹图的高精度滤波。该方法的基本思路是在对相位图像进行滤波处理前,先将相位图通过正余弦函数进行映射转换成两幅图,分别经过频域滤波,然后再合成为相位图。这种分解频域滤波方法可以在滤波的同时,有效保留相位跳变信息。实验结果表明：与传统的图像降噪方法相比,该方法能够在保留图像“尖峰”信息的基础上,较好地滤除图像中的散斑噪声,方法简单有效,有效解决了传统滤波方法应用在相位条纹图中,相图灰度信息丢失10%~40%的问题。     

Improved evaluation of electronic speckle pattern interferograms by photogrammetric image analysis

Electronic speckle pattern interferometry (ESPI) is a well-established tool for non-destructive testing. It allows the quantitative determination of surface deformations and micro-movements with a sub-micrometer resolution. In the case of objects which are extended in depth, however, the evaluation and interpretation of the resulting correlation fringe patterns can be affected by perspective image distortions as well as by a varying image size. In this paper a method for combination of ESPI with a photogrammetric 3D coordinate measurement is presented. In this way, interferogram data are precisely allocated in 3D-space. Furthermore, it is possible to take into account a spatially varying sensitivity vector. The utilizability of the method is demonstrated by a deformation measurement on a stone sculpture.     

Speckle interferometric damage investigation of fibre-reinforced composites

With the aid of the recently reported technique of adding up phase images modulo 2π that correspond to stepwise applied load increments, the fringe density that can be achieved in electronic speckle pattern interferometry (ESPI) has been substantially improved. This technique also allows the measurement of much larger deformations than were hitherto possible with ESPI. The analytical power of the method is demonstrated in the measurement of high local displacement gradients in carbon fibre-reinforced plastics (CFRPs). In-plane and out-of-plane displacement field measurements, performed with one single optical instrument, are compared with finite-element models. This paper reports how the technique is used to detect and quantify damage in fatigued CFRP laminates via its effect on the surface displacement field. Moreover, the measured displacement fields are used to validate a finite-element damage model. The correctness of the delamination measurement is verified with the aid of ultrasonic C-scan reference results.     

Contrast enhanced and phase controlled stroboscopic additive fibre optic TV-holography for whole field out-of-plane vibration analysis

A new technique for real-time contrast enhancement and phase control of fringes in additive Stroboscopic TV-holography applied to out-of-plane vibration analysis and its implementation on a fibre-optic electronic speckle pattern interferometer (FOESPI) are presented. Synchronous Stroboscopic illumination, firing two pulses per object vibration period, is combined with simultaneous inter-pulse (high frequency) and inter-frame (low frequency) phase modulation in the reference arm of the ESPI yielding a sequence of frames (interferograms) that are grabbed and processed in real-time. With this technique both speckle and fringe phases are independently controlled by means of the parameters of modulation enabling speckle contrast inversion, as required to enhance the visibility of fringes by sequential subtraction, as well as dynamic fringe phase shifting to solve peakvalley ambiguities.