Syntheses,structures and electrochemistry of manganese(III) complexes derived from N,N′-o-phenylenebis(3-ethoxysalicylaldimine): Efficient catalyst for styrene epoxidation

Syntheses, characterizations, electrochemistry and catalytic properties for styrene epoxidation of three manganese(III) compounds [Mn^IIIL¹(H₂O)(MeOH)](ClO₄) (1) [Mn^IIIL¹(N₃)(H₂O)]·dmf (2) [Mn^IIIL¹(Cl)(H₂O)] (3) derived from the Schiff base compartmental ligand N,N′-o-phenylenebis(3-ethoxysalicylaldimine) (H₂L¹) are reported. The three compounds are characterized by elemental analyses, IR, mass and UV–Vis spectra and conductance values. Single crystal X-ray structures of 1 and 2 have been determined. The structures of 1 and 2 show that these are mononuclear compounds having a salen type structure. In both structures, a dinuclear species is formed by bifurcated hydrogen bonding involving coordinated water molecule. The coordination of chloride in 3 is shown by conductance measurements. The compounds have also been characterized by UV–Vis and mass spectroscopic studies. Cyclic voltammetric and square wave voltammetric studies of the three compounds reveal that these undergo Mn(III)/Mn(II) reduction reversibly with the order of the ease of reduction as 3 > 2 > 1. This order has been explained proposing the composition of active species in solution. Catalytic properties for epoxidation of styrene by all the three complexes using PhIO and NaOCl as oxidant have been studied. The order of both the styrene conversion and styrene epoxidation using the three title compounds is 3 > 1 > 2. Again, it has been observed that more efficient conversion and epoxidation take place when PhIO is used as oxidant.     

Mixed ligand complexes of AEE hexafluoroacetylacetonates with diglyme: Synthesis,crystal structure and thermal behavior

The novel mixed ligand complexes [Ca(hfa)₂(diglyme)(H₂O)] (I), [Sr(hfa)₂(diglyme)(H₂O)] (II) and [Ba(hfa)₂(diglyme)₂] (III) (Hhfa = 1,1,1,5,5,5-hexafluoropentane-2,4-dione, diglyme = 2,5,8-trioxanonane) were synthesized by the reactions of the alkaline earth element (AEE) carbonates in n-hexane with a mixture of Hhfa and diglyme, and they were characterized by elemental analysis, ¹H and ¹³C NMR, and FTIR spectroscopy. The crystal structures of I–III, consisting of mononuclear isolated molecules, have been determined. The thermal behavior and composition of the vapor phase have been studied for I–III by thermal analysis at low pressure and mass spectrometry using a Knudsen cell. The stability of the mixed ligand complexes [M(hfa)₂(diglyme)_n] to the removal of diglyme molecules under heating decreases in the row I > II ≈ III, and only I evaporates as the mixed ligand complex after water removal.     

Mononuclear Fe(III) and tetranuclear [Fe(III)Gd(III)]2 complexes with a Schiff-base ligand derived from the o-vanillin: Synthesis, crystal structures and magnetic properties

The mononuclear high-spin iron(III) complexes [Fe(3-MeOsalpn)Cl(H₂O)] (1) and [Fe(3-MeOsalpn)(NCS)(H₂O)]·0.5CH₃CN (2) and the tetranuclear oxo-bridged compound [{Fe(3-MeOsalpn)Gd(NO₃)₃}₂(μ-O)]·CH₃CN (3) [3-MeOsalpn²⁻ = N,N′-propylenebis(3-methoxysalicylideneiminate)] have been prepared and magneto-structurally characterised. The iron(III) ion in 1 and 2 is six-coordinated in a somewhat distorted octahedral surrounding with the two phenolate-oxygens and two imine-nitrogens from the Schiff-base building the equatorial plane and a water (1 and 2) and a chloro (1)/thiocyanate-nitrogen (2) in the axial positions. The neutral mononuclear units of 1 and 2 are assembled into centrosymmetric dinuclear motifs through hydrogen bonds between the axially coordinated water molecule of one iron centre and methoxy-oxygen atoms from the Schiff-base of the adjacent iron atom. The values of the intradimer metal-metal distance within the supramolecular dimers are 4.930 (1) and 4.878 Å (2). The tetranuclear of 3 can be described as two {Fe^III(3-MeOsalpn)} units connected through an oxo-bridge, each one hosting a [Gd^III(NO₃)₃] entity in the outer cavity defined by the two phenolate- and two methoxy-oxygen atoms. The values of the intramolecular Fe?Fe and Fe?Gd distances in 3 are 3.502 and 3.606 Å, respectively. The analysis of the magnetic data of 1-3 in the temperature range 1.9-300 K shows the occurrence of weak intermolecular antiferromagnetic interactions in 1 and 2 [J = −0.76 (1) and −0.75 cm⁻¹ (2) with the Hamiltonian defined as H = −JS_Fe1·S_Fe1] whereas two intramolecular antiferromagnetic interactions coexist in 3, one very strong between the two iron(III) ions (J₁) through the oxo bridge and the other much weaker between the iron(III) and the Gd(III) ions (J₂) across the double phenoxo oxygens [J₁ = −275 cm⁻¹ and J₂ = −3.25 cm⁻¹, the Hamiltonian being defined as H=-J₁S_Fe1·S_Fe1^′-J₂(S_Fe1·S_Gd1+S_Fe1^′·S_Gd1^′)]. These values are analysed in the light of the structural data and compared with those of related systems.     

1-Methyl-4-ferrocenylmethyl-3,5-diphenylpyrazole: A versatile ligand for palladium(II) and platinum(II)

The syntheses and characterization of two novel ferrocene derivatives containing 3,5-diphenylpyrazole units of general formula [1-R-3,5-Ph₂-(C₃N₂)-CH₂-Fc] {Fc = (η⁵-C₅H₅)Fe(η⁵-C₅H₄) and R = H (2) or Me (3)} together with a study of their reactivity with palladium(II) and platinum(II) salts or complexes under different experimental conditions is described. These studies have allowed us to isolate and characterize trans-[Pd{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}₂Cl₂] (4a) and three different types of heterodimetallic complexes: cis-[M{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] {M = Pd (5a) or Pt (5b)}, the cyclometallated products [M{κ²-C,N-[3-(C₆H₄)-1-Me-5-Ph-(C₃N₂)]-CH₂-Fc}Cl(L)] with L = PPh₃ and M = Pd (6a) or Pt (6b) or L = dmso and M = Pt (8b) and the trans-isomer of [Pt{1-Me-3,5-Ph₂-(C₃N₂)-CH₂-Fc]}Cl₂(dmso)] (7b). In compounds 4a, 5a, 5b and 7b, the ligand behaves as a neutral N-donor group; while in 6a, 6b and 8b it acts as a bidentate [C(sp²,phenyl),N(pyrazole)]⁻ group. A comparative study of the spectroscopic properties of the compounds, based on NMR, IR and UV-Visible experiments, is also reported.     

Liquid crystal behaviour of ionic allylpalladium complexes containing 2-pyrazolylpyridine as bidentate N,N′-ligand

Two types of Pd-complexes containing the new N,N′-ligands 2-[3-(4-alkyloxyphenyl)pyrazol-1-yl]pyridine (pz^Rpy; R = C₆H₄OC_nH_2n+1, n = 6 (hp), 10 (dp), 12 (ddp), 14 (tdp), 16 (hdp), 18 (odp)) (1-6), namely c-[Pd(Cl)₂(pz^Rpy)] (7-10) and c-[Pd(η³-C₃H₅)(pz^Rpy)]BF₄ (11-16), have been synthesised and characterised by different spectroscopic techniques. Those members of the second type containing the largest chains (R = ddp 13, tdp 14, hdp 15, odp 16) have been found to have liquid crystal properties showing smectic A mesophases. By contrast, neither the free ligands pz^Rpy nor their related c-[Pd(Cl)₂(pz^Rpy)] complexes exhibited mesomorphism. The new synthesised metallomesogens are mononuclear complexes with an unsymmetrical molecular shape as deduced from the X-ray structures of c-[Pd(η³-C₃H₅)(pz^Rpy)]BF₄ (R = hp, 11; dp, 12). Both compounds, which are isostructural, show a distorted square-planar environment on the palladium centres defined by the allyl and the bidentate pz^Rpy ligands. The crystal structure reveals that both the counteranion and the pz^Rpy ligand function as a source of hydrogen-bonding and intermolecular π?π contacts resulting in a ²D supramolecular assembly.     

Metal–organic frameworks (MOFs) constructed from Zn/Cd-2,2′-bipyridines and polycarboxylic acids: Synthesis,characterization and microstructural studies

Metal–organic frameworks with the compositions [Zn(bpy)(bdc)(H₂O)]_n1, [Zn(bpy)(btec)_1/2(H₂O)]_n2, [Cd(bpy)(bdc)(H₂O)]_n3 and Cd(bpy)(btec)_1/2(H₂O)]_n4 (H₂bdc = 1,4-benzenedicarboxylic acid = terephthalic acid, H₄btec = 1,2,4,5-benzenetetracarboxylic acid and bpy = 2,2′-bipyridine) have been synthesized and characterized using spectroscopic and single-crystal X-ray diffraction techniques. In these complexes, Zn^II/Cd^II-2,2′-bipyridine units and carboxylate anions exists as nodes and spacers respectively. An infinite 1D zig-zag chain structure is observed for both complexes 1 and 3, whereas complexes 2 and 4 display a 3D supramolecular architecture. The complexes are found to be photoluminescent, porous and show significant thermal stability.     

Self-assembly of 1D coordination polymers from nickel(II) tetraaza macrocycle and carboxylate ligands

Reactions of [Ni(L)]Cl₂ · 2H₂O (L = 3,14-dimethyl-2,6,13,17-tetraazatricyclo[14,4,0^1.18,0^7.12]docosane) with isophthalic acid (H₂isoph) and 1,3,5-cyclohexanetricarboxylic acid (H₃chtc) yield the 1D nickel(II) complexes {[Ni(L)(isoph)] · 3H₂O}_n (1) and {[Ni(L)(H-chtc)] · H₂O}_n (2). The structures were characterized by X-ray crystallography, spectroscopic and magnetic susceptibility. The crystal structures of the 1D chain compounds 1 and 2 show an elongated distorted octahedron about each nickel(II) ion. The magnetic behavior of two compounds exhibits weak intrachain antiferromagnetic interaction with J values of −0.93 cm⁻¹ for 1 and −1.28 cm⁻¹ for 2. The electronic spectra of the complexes are significantly affected by the nature of the carboxylate ligands.     

Synthesis and molecular structures of lanthanocene amide complexes and their catalytic activity for addition of amines to nitriles

Reaction of (CH₃C₅H₄)₂LnCl(THF) with NaNHAr in a 1:1 molar ratio in THF afforded the amide complexes (CH₃C₅H₄)₂LnNHAr(THF) [(Ar = 2,6-Me₂C₆H_3, Ln = Yb (I), Y (III); Ar = 2,6-ⁱPr₂C₆H₃, Ln = Yb (II)]. X-ray crystal structure determination revealed that complexes I-III are isostructural. The central metal in each complex coordinated to two methylcyclopentadienyl groups, one amide group and one oxygen atom from THF to form a distorted tetrahedron. Complexes I-III and a known complex (CH₃C₅H₄)₂YbNⁱPr₂(THF) IV all can serve as the catalysts for addition of amines to nitriles to monosubstituted N-arylamidines. The activity depended on the central metals and amide groups, and the active sequence follows the trend IV ≈ III < I < II.     

Dependence of the product on the P–P ligand in reactions of [RuCl3(NO)(P–P)] complexes (P–P = aromatic diphosphines) with 2-mercaptopyridine

This study presents the syntheses and characterization of 2-mercaptopyridine (pyS⁻) complexes containing ruthenium(II) with the following general formula [Ru(pyS)₂(P–P)], P–P = (c-dppen) = cis-1,2-bis(diphenylphosphino)ethylene) (1); (dppe) = 1,2-bis(diphenylphosphino)ethane (2); (dppp) = 1,3-bis(diphenylphosphino)propane (3) and (dppb) = 1,4-bis(diphenylphosphino)butane (4). The complexes were synthesized from the mer- or fac-[RuCl₃(NO)(P–P)] precursors in the presence of triethylamine in methanol solution with dependence of the product on the P–P ligand. The reaction of pyS⁻ with a ruthenium complex containing a bulky aromatic diphosphine dppb disclosed a major product with a dangling coordinated dppbO-P, the [Ru(pyS)₂(NO)(η¹-dppbO-P)]PF₆(5). In addition, this work also presents and discusses the spectroscopic and electrochemical behavior of 1–5, and report the X-ray structures for 1 and 5.     

Ruthenium(III) and iridium(III) complexes with nicotine

A new chloride-dimethylsulfoxide-ruthenium(III) complex with nicotine trans-[Ru^IIICl₄(DMSO)[H-(Nicotine)]] (1) and three related iridium(III) complexes; [H-(Nicotine)]trans-[Ir^IIICl₄(DMSO)₂] (2), trans-[Ir^IIICl₄(DMSO)[H-(Nicotine)]] (3) and mer-[Ir^IIICl₃(DMSO)(Nicotine)₂] (4) have been synthesized and characterized by spectroscopic techniques and by single crystal X-ray diffraction (1, 2, and 4). Protonated nicotine at pyrrolidine nitrogen is present in complexes 1 and 3 while two neutral nicotine ligands are observed in 4. In these three inner-sphere complexes coordination occurs through the pyridine nitrogen. Moreover, in the outer-sphere complex 2, an electrostatic interaction is observed between a cationic protonated nicotine at the pyrrolidine nitrogen and the anionic trans-[Ir^IIICl₄(DMSO)₂]^¯ complex.     

Organometallic consequences of a redox reaction: Terminal trimethylsilylmethylidene titanium complexes prepared by a one-electron oxidation step

One-electron oxidation of the titanium(III) bis-trimethylsilylmethyl complex (nacnac)Ti(CH₂SiMe₃)₂ (1) (nacnac⁻ = [ArNC(Me)]₂CH, Ar = 2,6-ⁱPr₂C₆H₃), readily prepared from (nacnac)TiCl₂(THF) and 2 equiv. of LiCH₂SiMe₃ in Et₂O, with AgOTf results in formation of the five-coordinate and terminal titanium alkylidene complex (nacnac)TiCHSiMe₃(OTf)(THF) (2)-THF concurrent with extrusion of tetramethylsilane and precipitation of silver metal. Complex 2-THF eliminates THF slowly under dynamic vacuum to generate the four-coordinate alkylidene 2 along with some decomposition products. Alternatively, the four-coordinate and non-solvento alkylidene complex, 2, can be prepared from 1 and AgOTf in pentane. Complex 2 undergoes cross-metathesis transformation to afford [ArNC(Me)CHC(Me)CHSiMe₃]TiNAr(OTf) (3) as the major product after 34 h at room temperature. Complexes 1, 2, 2-THF, and 3 have been fully characterized spectroscopically, and single crystal X-ray diffraction analysis for 1 and 2-THF are presented.     

Synthesis,structure, and electrochemistry of pyridinecarboxamide cobalt(III) complexes; the effect of bridge substituents on the redox properties

Two series of complexes of the types trans-[Co^III(Mebpb)(amine)₂]ClO₄ {Mebpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-methylbenzene dianion, and amine = pyrrolidine (prldn) (1a), piperidine (pprdn) (2a), morpholine (mrpln) (3a), benzylamine (bzlan) (4a)}, and trans-[Co^III(cbpb)(amine)₂]X {cbpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-chlorobenzene dianion, and amine = pyrrolidine (prldn), X = PF₆ (1b), piperidine (pprdn), X = PF₆ (2b), morpholine (mrpln), X = ClO₄ (3b), benzylamine (bzlan), X = PF₆ (4b)} have been synthesized and characterized by elemental analyses, IR, UV–Vis, and ¹H NMR spectroscopy. The crystal structure of 1a has been determined by X-ray diffraction. The electrochemical behavior of these complexes, with the goal of evaluating the effect of axial ligation and equatorial substitution on the redox properties, is also reported. The reduction potential of Co^III, ranging from −0.53 V for (1a) to −0.31 V for (3a) and from −0.48 V for (1b) to −0.22 V for (3b) show a relatively good correlation with the σ-donor ability of the axial ligands. The methyl and chloro substituents of the equatorial ligand have a considerable effect on the redox potentials of the central cobalt ion and the ligand-centered redox processes.     

Olefin-aminocarbyne coupling in diiron complexes: Synthesis of new bridging aminoallylidene complexes

The bridging aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (R = Me, 1a; Xyl, 1b; 4-C₆H₄OMe, 1c; Xyl = 2,6-Me₂C₆ H₃) react with acrylonitrile or methyl acrylate, in the presence of Me₃NO and NaH, to give the corresponding μ-allylidene complexes [Fe₂{μ-η¹:η³- C_α(N(Me)(R))C_β(H)C_γ(H)(R′)}(μ-CO)(CO)(Cp)₂] (R = Me, R′ = CN, 3a; R = Xyl, R′ = CN, 3b; R = 4-C₆H₄OMe, R′ = CN, 3c; R = Me, R′ = CO₂Me, 3d; R = 4-C₆H₄OMe, R′ = CO₂Me, 3e). Likewise, 1a reacts with styrene or diethyl maleate, under the same reaction conditions, affording the complexes [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(R′)C_γ(H)(R″)}(μ-CO)(CO)(Cp)₂] (R′ = H, R″ = C₆H₅, 3f; R′ = R″ = CO₂Et, 3g). The corresponding reactions of [Ru₂{μ-CN(Me)(CH₂Ph)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (1d) with acrylonitrile or methyl acrylate afford the complexes [Ru₂{μ-η¹:η³-C_α(N(Me)(CH₂Ph))C_β(H)C_γ(H)(R′)}(μ-CO)(CO)(Cp)₂] (R′ = CN, 3h; CO₂Me, 3i), respectively.The coupling reaction of olefin with the carbyne carbon is regio- and stereospecific, leading to the formation of only one isomer. C-C bond formation occurs selectively between the less substituted alkene carbon and the aminocarbyne, and the C_β-H, C_γ-H hydrogen atoms are mutually trans.The reactions with acrylonitrile, leading to 3a-c and 3h involve, as intermediate species, the nitrile complexes [M₂{μ-CN(Me)(R)}(μ-CO)(CO)(NC-CHCH₂)(Cp)₂][SO₃CF₃] (M = Fe, R = Me, 4a; M = Fe, R = Xyl, 4b; M = Fe, R = 4-C₆H₄OMe, 4c; M = Ru, R = CH₂C₆H₅, 4d).Compounds 3a, 3d and 3f undergo methylation (by CH₃SO₃CF₃) and protonation (by HSO₃CF₃) at the nitrogen atom, leading to the formation of the cationic complexes [Fe₂{μ-η¹:η³-C_α(N(Me)₃)C_β(H)C_γ(H)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = CN, 5a; R = CO₂Me, 5b; R = C₆H₅, 5c) and [Fe₂{μ-η¹:η³-C_α(N(H)(Me)₂)C_β(H)C_γ(H)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = CN, 6a; R = CO₂Me, 6b; R = C₆H₅, 6c), respectively.Complex 3a, adds the fragment [Fe(CO)₂(THF)(Cp)]⁺, through the nitrile functionality of the bridging ligand, leading to the formation of the complex [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(H)C_γ(H)(CNFe(CO)₂Cp)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (9).In an analogous reaction, 3a and [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃], in the presence of Me₃NO, are assembled to give the tetrameric species [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(H)C_γ(H)(CN[Fe₂{μ- CN(Me)(R)}(μ-CO)(CO)(Cp)₂])}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = Me, 10a; R = Xyl, 10b; R = 4-C₆H₄OMe, 10c).The molecular structures of 3a and 3b have been determined by X-ray diffraction studies.     

Intra- and intermolecular hydrogen bonds in [Ag(PPh3)3(HL)] complexes [H2L: H2xspa = 3(aryl)-2-sulfanylpropenoic acids; H2cpa = 2-cyclopentylidene-2-sulfanylacetic acid]

Compounds of the type [Ag(PPh₃)₃(HL)] {H₂xspa=3(aryl)-2-sulfanylpropenoic acids: x = Clp [3-(2-chlorophenyl)-], -o-mp [3-(2-methoxyphenyl)-], -p-mp [3-(4-methoxyphenyl)-], -o-hp [3-(2-hydroxyphenyl)-], -p-hp [3-(4-hydroxyphenyl-); H₂cpa = 2-cyclopentylidene-2-sulfanylacetic acid} were synthesized and characterised by IR and NMR (¹H ¹³C and ³¹P) spectroscopy and by FAB mass spectrometry. The crystal structures of [Ag(PPh₃)₃(HClpspa)], [Ag(PPh₃)₃(H-o-mpspa)], [Ag(PPh₃)₃(H-p-mpspa)] and [Ag(PPh₃)₃(Hcpa)] reveal the presence of discrete molecular units containing an intramolecular O-H···S hydrogen bond between the S atom and one of the O atoms of the COOH group. This intramolecular hydrogen bond remains in [Ag(PPh₃)₃(H-o-hpspa)]·EtOH and [Ag(PPh₃)₃(H-p-hpspa)] but in both cases polymeric structures are built on the basis of O-H···O interactions that involve the -OH substituent of the phenyl group of the sulfanylpropenoate fragment.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.     

Mixed-metal single-molecule magnets: Syntheses, structure, and magnetic properties of [Mn8Fe4O12(O2CR)16(H2O)4] (R = CH2Cl, CH2Br, CHCl2)

Three mixed-metal single-molecule magnets containing [Mn₈Fe₄O₁₂]¹⁶⁺ cores are synthesized and characterized. The reaction of FeCl₂·4H₂O with KMnO₄ and RCOOH (R = CH₂Cl, CH₂Br) in H₂O gives [Mn₈Fe₄O₁₂(O₂CR)₁₆(H₂O)₄] (R = CH₂Cl (1), CH₂Br (2)) in yields of 43% and 40%, respectively. Treatment of complex 1 with an excess of CHCl₂COOH in CH₂Cl₂ gives [Mn₈Fe₄O₁₂(O₂CCHCl₂)₁₆(H₂O)₄]·CH₂Cl₂·10H₂O (3·CH₂Cl₂·10H₂O) in a yield of 83%. The X-ray structure analysis reveals that all three complexes consist of a trapped-valence dodecanuclear core comprising 4Mn^III, 4Fe^III, and 4Mn^IV ions. DC magnetic susceptibility and magnetization measurements indicate that all three complexes exhibit intramolecular antiferromagnetic interaction, resulting in an S = 4 ground state. In addition, frequency-dependent out-of-phase AC magnetic susceptibility signals at low temperature for complexes 1, 2, and 3 are indicative of their single-molecule magnetism behavior.     

Half-sandwich binuclear carbaborane compounds: Closo-carbaboranes as good σ-donar ligands

The synthesis of half-sandwich binuclear transition-metal complexes containing the Cab^C,C chelate ligands (Cab^C,C = C₂B₁₀H₁₀ (1)) is described. 1Li₂ was reacted with chloride-bridged dimers [Cp∗RhCl(μ-Cl)]₂ (Cp∗ = η⁵-C₅(CH₃)₅), [Cp′RhCl(μ-Cl)]₂ (Cp′ = η⁵-1,3-^tBu₂C₅H₃), [Cp∗IrCl(μ-Cl)]₂ and [(p-cymene)RuCl(μ-Cl)]₂ to give half-sandwich binuclear complexes [Cp∗Rh(μ-Cl)]₂(Cab^C,C) (2), [Cp′Rh(μ-Cl)]₂(Cab^C,C) [3),[Cp∗Ir(μ-Cl)]₂(Cab^C,C) (4) and [(p-cymene)Ru(μ-Cl)]₂(Cab^C,C) (5), respectively. Addition reactions of the ruthenium complex 5 with air gave [(p-cymene)₂Ru₂(μ-OH)(μ-Cl)](Cab^C,C) (6), rhodium complex 2 with LiSPh gave [Cp∗Rh(μ-SPh)]₂(Cab^C,C) (7). The complexes were characterized by IR, NMR spectroscopy and elemental analysis. In addition, X-ray structure analysis were performed on complexes 2-7 where the potential C,C-chelate ligand was found to coordinate in a bidentate mode as a bridge.     

New 3d–4f supramolecular systems constructed by [Fe(bipy)(CN)4] and partially blocked lanthanide cations

The reaction of acetonitrile (1–5) and mixed acetonitrile/water 1:1 (6–9) solutions containing the cyanide-bearing [Fe(bipy)(CN)₄]⁻ building block (bipy = 2,2′-bipyridine) and the partially blocked [Ln(bpym)]³⁺ cation (Ln = lanthanide trivalent cation and bpym = 2,2′-bipyrimidine) has afforded two new families of 3d–4f supramolecular assemblies of formula [Ln(bpym)(NO₃)₂(H₂O)₃][Fe(bipy)(CN)₄] · H₂O · CH₃CN [Ln = Sm (1), Gd (2), Tb (3), Dy (4) and Ho (5)] and [Ln(bpym)(NO₃)₂(H₂O)₄][Fe(bipy)(CN)₄] [Ln = Pr (6), Nd (7), Sm (8), Gd (9)]. They crystallize in the P2₁/c (1–5) and P2/c (6–9) space groups and their structures are made up of [Fe(bipy)(CN)₄]⁻ anions (1–9) and [Ln(bpym)(NO₃)₂(H₂O)_n]⁺ cations [n = 3 (1–5) and 4 (6–9)] with uncoordinated water and acetonitrile molecules (1–5) which are interlinked through an extensive network of hydrogen bonds and π–π stacking into three-dimensional motifs. Both families have in common the occurrence of the low-spin iron(III) unit [Fe(bipy)(CN)₄]⁻ where two bipy–nitrogen and four cyanide–carbon atoms build a somewhat distorted octahedral surrounding around the iron atom [Fe–N = 1.980(3)–1.988(3) Å (1–5) and 1.988(2)–1.992(2) Å (6–9); Fe–C = 1.904(5)–1.952(4) Å (1–5) and 1.911(2)–1.948(3) Å (6–9)]. The main structural difference between both families concerns the environment of the lanthanide atom which is nine- (1–5)/10-coordinated (6–9) with a chelating bpym, two bidentate nitrate and three (1–5)/four (6–9) water molecules building distorted monocapped (1–5)/bicapped (6–9) square antiprisms. This different lanthanide environment is at the origin of the different hydrogen bonding pattern of the two families of compounds.     

Copper(II) complexes of tridentate selenobisphenolate ligand in mixed ligand environments: Synthesis, crystal structure, EPR and electrochemical studies

A series of square-pyramidal copper(II) complexes, [Cu(L^Se)(N^∧N)] (H₂L^Se = seleno-bisphenolate; N^∧N = bipyridyl, phenanthroline or N,N-dimethylethylenediamine) have been synthesized and characterized by elemental analyses, magnetic measurements, IR, EPR, and electronic spectral studies. Single crystal X-ray structures of [Cu(L^Se)(bpy)]·H₂O (2), [Cu(L^Se)(phen)]·CH₂Cl₂ (3) and [Cu(L^Se)(N,N-Me₂en)] (4) showed that all the complexes have approximately square-pyramidal geometry. In complexes 2 and 3, the square plane is occupied by O(1), O(2), N(1) and N(2) and the apical position by Se atom of L^{Se 2−} ligand. The asymmetric unit of complex 4 contains two crystallographically independent discrete molecules A and B with CuN₂OSe chromophore comprising the square plane and the axial position being occupied by another phenolate oxygen atom. Complexes 2, 3 and 4 are found to be paramagnetic and EPR parameters extracted are: g_∥ = 2.232, g_⊥ = 2.069; 〈g_eff〉 = 1.95; and g_∥ = 2.232, g_⊥ = 2.083 for complexes 2, 3 and 4, respectively. Both the complexes 2 and 4 show three reduction processes: (a) a quasi-reversible reduction of Cu^II to Cu^I, (b) an irreversible reduction of Cu^I to Cu⁰ with the release of free ligand, and (c) a reduction process occurs at this coordinated ligand. They also show a well-defined quasi-reversible oxidation of Cu^II to Cu^III and an irreversible oxidation peak at ∼1.30 and 1.40 V vs. Ag/AgCl for 4 and 2, respectively, with no cathodic counterpart, and were attributed to the oxidation of the metal coordinated ligand.