Synthesis of Nanosize Silica in a Nonionic Water-in-Oil Microemulsion: Effects of the Water/Surfactant Molar Ratio and Ammonia Concentration

The effect of ammonia concentration on the region of existence of single-phase water-in-oil microemulsions has been investigated for the system polyoxyethylene (5) nonylphenyl ether (NP-5)/cyclohexane/ammonium hydroxide. The presence of ammonia decreases the size of the microemulsion region. A minimum concentration of surfactant (estimated at about 1.1 wt%) is required for solubilization of the aqueous phase; this value is not significantly affected by ammonia concentration. As indicated by fluorescence spectral data, the transition between bound and free water occurs when the water-to-surfactant molar ratio is about 1 and the presence of ammonium hydroxide does not appear to have a significant effect on this. Ultrafine (30-70 nm diameter), monodisperse silica particles produced by hydrolysis of tetraethoxysilane (TEOS) in the microemulsion show a complex dependence of the particle size on the water-to-surfactant molar ratio (R) and on the concentration of ammonium hydroxide. At relatively low ammonia concentration in the aqueous pseudophase (1.6 wt% NH3) the particle size decreases monotonically with increase in R. However, for higher ammonia concentrations (6.3-29.6 wt% NH3) a minimum in particle size occurs as R is increased. These trends are rationalized in terms of (a) the effects of the concentration, structure, and dynamics of the NP-5 reverse micelles on the hydrolysis and condensation reactions of TEOS, and (b) the effects of ammonia concentration on the stability of the microemulsion phase, the hydrolysis/condensation reactions of TEOS, and the depolymerization of siloxane bonds. Copyright 1999 Academic Press.     

Controllable synthesis of silica nanoparticle size and packing efficiency onto PVP-functionalized PMMA via a sol–gel method

This study aimed to investigate synthesis and adsorption behavior of silica nanoparticles onto polyvinylpyrrolidone (PVP)-functionalized poly(methyl methacrylate) under various conditions such as methanol/water ratio, ammonium hydroxide concentration, polymer contents, tetraethylorthosilicate contents, and total volume of solvent via sol–gel method. First, the copolymerization of methyl acrylate as a comonomer and 1-dodecanethiol as a chain transfer agent increased the thermal stability of the product; however, the uniformity of the PMMA particles decreased because of the chain transfer reaction. Second, the adsorption behavior and size of silica nanoparticles could be controlled by adjusting the silica synthesis conditions. The adsorbed silica particle size was greatly influenced by the ammonium hydroxide concentration and the addition of water further enhanced the size increase. However, increasing the water content reduced the packing efficiency of the adsorbed silica particles. Increasing the PVP-functionalized PMMA content at a fixed TEOS content linearly decreased the silica particle size. But TEOS concentration did not significantly affect the silica particle size. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 662–672     

Dye-doped silica nanoparticle labels/protein microarray for detection of protein biomarkers

We report a dye-encapsulated silica nanoparticle as a label, with the advantages of high fluorescence intensity, photostability, and biocompatibility, in conjunction with microarray technology for sensitive immunoassay of a biomarker, interleukin-6 (IL-6), on a microarray format. The tris(2,2'-bipyridyl)ruthenium(ii) chloride hexahydrate (Rubpy) dye was incorporated into silica nanoparticles using a simple one-step microemulsion synthesis. In this synthesis process, Igepal CA520 was used as the surfactant, therefore, no requirement of cosolvent during the synthesis and the particle size was reduced comparing to the commonly used Triton surfactant system. The nanoparticles are uniform in size with a diameter of 50 nm. The microarray fluorescent immunoassay approach based on dye-doped silica nanoparticle labels has high sensitivity for practical applications with a limit of detection for IL-6 down to 0.1 ng mL(-1). The calibration curve is linear over the range from 0.1 ng mL(-1) to 10 ng mL(-1). Furthermore, results illustrated that the assay is highly specific for IL-6 in the presence of range of cytokines or proteins. The RuDS dye-labeled nanoparticles in connection with protein microarrays show the promise for clinical diagnosis of biomarkers.     

Dye-Doped Silica Nanoparticles for Enhanced ECL-Based Immunoassay Analytical Performance

The combination of highly sensitive techniques such as electrochemiluminescence (ECL) with nanotechnology sparked new analytical applications, in particular for immunoassay-based detection systems. In this context, nanomaterials, particularly dye-doped silica nanoparticles (DDSNPs) are of high interest, since they can offer several advantages in terms of sensitivity and performance. In this work we synthesized two sets of monodispersed and biotinylated [Ru(bpy)₃]²⁺-doped silica nanoparticles, named bio-Triton@RuNP and bio-Igepal@RuNP, obtained following the reverse microemulsion method using two different types of nonionic surfactants. Controlling the synthetic procedures, we were able to obtain nanoparticles (NPs) offering highly intense signal, using tri-n-propylamine (TPrA) as coreactant, with bio-Triton@RuNps being more efficient than bio-Igepal@RuNP.     

Effects of surfactant/water ratio and dye amount on the fluorescent silica nanoparticles

Effects of surfactant/water volume ratios and dye amounts on the properties of micelles and fluorescence silica nanoparticles were studied in microemulsions containing nonionic surfactant Triton X-100, hexanol as co-surfactant, cyclohexane as organic solvent, and metal organic dye (tris(2,2′-bipyridyl)dichlororuthenium) via fluorescence probe technique, TEM, and XPS. Fluorescence probe measurements show that the micelle microenvironment becomes stable at the surfactant/water volume ratio higher than 3.5 and the incubation time longer than 10 h. The data suggest that the silica shell, which is formed at the surfactant/water ratio of 3.5, yields an efficient protection of dye molecules against the e-beam irradiation and result in high photostability of fluorescent silica. We pioneered the localization of dye molecules on the surface of dye-doped silica and found that an increase of dye amounts, beyond a threshold, in the microemulsion cannot enhance the fluorescence intensity of dye-doped nanoparticles. These results are of significant importance for optimizing the synthesis of fluorescent nanoparticles with high photostability and low cost.     

Preparation and characterization of silica aquasols

Aquasols containing silica nanoparticles with diameters of 75 to 95 nm were obtained directly by hydrolysis of 2 wt.% tetraethoxysilane (TEOS) in water in the presence of a non-ionic surfactant. The reaction was catalyzed by hydrochloric acid, ammonia, or sodium hydroxide. The particle size, which mainly depends on the concentration of TEOS in water, was determined by dynamic light scattering (DLS). Whereas the catalysts have almost no influence on the particle size, they very strongly affect the morphology of the silica particles formed. The dried SiO(2) particles obtained via the HCl-catalyzed reaction have film-forming properties and show no measurable BET surface area. SiO(2) particles prepared with ammonia as catalyst form nanoporous films on glass, and the BET surface area of the freeze-dried particles is 540 m(2)/g. Using sodium hydroxide as catalyst results in some agglomeration of uniform spherical particles with a BET surface area of 237 m(2)/g. (29)Si MAS NMR investigations of the freeze-dried particles provide information about the degree of condensation and the ratio of "free" hydroxyl groups. The silica aquasols described have a surprisingly high hydrophilizing effect on hydrophobic fibers (PP, PET). Silica nanoparticles of comparable diameters, prepared by the "St?ber method", dispersed in alcohol do not show any hydrophilizing properties worth to mention.     

Fluorescent dye-doped silica nanoparticles: new tools for bioapplications

The need to decipher various biological events has led to the elucidation of the molecular mechanisms underlying a number of disease processes. Consequently, the detection and simultaneous monitoring of chemical interactions between biological targets has become indispensable in medical diagnosis, targeted therapeutics, and molecular biology. Multiplexed applications employing nanomaterials, which represent the integration of nanotechnology and biology, have changed the bioanalytical outlook and provided various promising tools. Among these nanomaterials, fluorescent dye-doped silica nanoparticles have demonstrated excellent potential for use in advanced bioanalysis to facilitate deeper understanding of biology and medicine at the molecular level. In particular, silica nanoparticles have been applied to diagnostics and therapeutic applications in cancer and gene/drug delivery. This feature article summarizes recent developments in the synthesis, biocompatibility, and bioapplications of fluorescent dye-doped silica nanoparticles.     

Growth of silica nanoparticles in methylmethacrylate-based water-in-oil microemulsions

The mechanism of silica particle formation in monomer microemulsions is studied using dynamic light scattering (DLS), atomic force microscopy, small-angle X-ray scattering (SAXS), and conductivity measurements. The hydrolysis of tetraethylorthosilicate (TEOS) in methylmethacrylate (MMA) microemulsions (MMA = methylmethacrylate) is compared with the formation of SiO₂ particles in heptane microemulsions. Stable microemulsions without cosurfactant were found for MMA, the nonionic surfactant Marlophen NP10, and aqueous ammonia (0.75 wt%). In the one-phase region of the ternary phase diagram, the water/surfactant ratio (R _w) could be varied from 6 to 18. The DLS and SAXS measurements show that reverse micelles form in these water-in-oil (w/o) microemulsions. The minimum water-to-surfactant molar ratio required for micelle formation was determined. Particle formation is achieved from the base-catalyzed hydrolysis of TEOS. According to atomic force microscopy measurements of particles isolated from the emulsion, the particle size can be effectively tailored in between 20 and 60 nm by varying R _w from 2–6 in heptane w/o microemulsions. For MMA-based microemulsions, the particle diameter ranges from 25 to 50 nm, but the polydispersity is higher. Tailoring of the particle size is not achieved with R _w, but adjusting the particle growth period produces particles between 10 and 70 nm.     

Uniform silica nanoparticles encapsulating two-photon absorbing fluorescent dye

We have prepared uniform silica nanoparticles (NPs) doped with a two-photon absorbing zwitterionic hemicyanine dye by reverse microemulsion method. Obvious solvatochromism on the absorption spectra of dye-doped NPs indicates that solvents can partly penetrate into the silica matrix and then affect the ground and excited state of dye molecules. For dye-doped NP suspensions, both one-photon and two-photon excited fluorescence are much stronger and recorded at shorter wavelength compared to those of free dye solutions with comparative overall dye concentration. This behavior is possibly attributed to the restricted twisted intramolecular charge transfer (TICT), which reduces fluorescence quenching when dye molecules are trapped in the silica matrix. Images from two-photon laser scanning fluorescence microscopy demonstrate that the dye-doped silica NPs can be actively uptaken by Hela cells with low cytotoxicity.     

Dynamic and static quenching of fluorescence by 1-4 nm diameter gold monolayer-protected clusters

How the efficiency of molecular quenching by Au nanoparticles depends on nanoparticle size is reported for (a) dynamic (collisional) quenching of four different fluorophores by three Au nanoparticles having similar protective layers but differing core diameters (1.1, 1.6, and 2.0 nm) and (b) static quenching in the electrostatic association between [Ru(bpy)3]2+ and five tiopronin-protected Au nanoparticles having core diameters from 1.3 to 3.9 nm. The quenching constants systematically increase with core size. In (a), the dynamic constants scale with the molar absorbance coefficients of the nanoparticles, showing the essentially of the absorbance/emission spectral overlap, and the associated nanoparticle core density of electronic states, in energy-transfer quenching. In (b), the fluorescence of the Au nanoparticle itself was enhanced by energy transfer from the [Ru(bpy)3]2+ fluorophore.     

纳米银粒子对[Ru(bpy)_3]~(2+)光谱学性质的影响及电解质效应

研究了[Ru(bpy)3]2+溶液中引入纳米银粒子的光谱学性质变化规律以及[Ru(bpy)3]2+与纳米银粒子所构成的溶液体系([Ru(bpy)3]2+-Ag)的电解质效应.研究结果表明,[Ru(bpy)3]2+吸附在纳米银粒子表面使纳米银粒子相互桥连形成规则的类链状网络聚集体.纳米银粒子造成[Ru(bpy)3]2+溶液荧光猝灭,且大尺寸的纳米银粒子引起的荧光猝灭程度较大.在[Ru(bpy)3]2+-Ag体系中引入电解质造成纳米银粒子不同程度的聚集和生长.电解质对纳米银聚集影响为:CaCl2MgCl2Ca(NO3)2KClKNO3.随着[Ru(bpy)3]2+-Ag体系中引入电解质含量的增加,溶液的荧光强度先降低而后又逐渐增强,直至达到定值,表明一定量的电解质可产生荧光猝灭释放效应.电解质对荧光强度影响顺序为:Ca(NO3)2CaCl2MgCl2KClKNO3.采用透射电子显微镜、紫外-可见吸收分光光度计和荧光分光光度计等手段从分子间相互作用和能量传输等方面初步探讨了纳米银粒子对表面吸附[Ru(bpy)3]2+溶液光谱学性质的影响机制以及电解质效应.     

Ru(bpy)_3 掺杂的核壳型 Ag@SiO_2 荧光纳米粒子的制备及表征

利用反相微乳液法制备了一种三联吡啶钌掺杂的核壳型Ag@SiO2纳米粒子。利用透射电子显微镜、荧光光谱和紫外-可见光谱等对其进行表征,并对其光稳定性和表面氨基进行了测定,结果表明该纳米粒子单分散性良好,呈规则球状、粒径为(60±5)nm,由于银的金属增强荧光效应,相对没有银核的Ru(bpy)3掺杂的SiO2纳米粒子,其荧光强度增强了2倍,光稳定性也有所提高。     

Bifunctional nanostructure of magnetic core luminescent shell and its application as solid-state electrochemiluminescence sensor material

Bifunctional nanoarchitecture has been developed by combining the magnetic iron oxide and the luminescent Ru(bpy)32+ encapsulated in silica. First, the iron oxide nanoparticles were synthesized and coated with silica, which was used to isolate the magnetic nanoparticles from the outer-shell encapsulated Ru(bpy)32+ to prevent luminescence quenching. Then onto this core an outer shell of silica containing encapsulated Ru(bpy)32+ was grown through the St?ber method. Highly luminescent Ru(bpy)32+ serves as a luminescent marker, while magnetic Fe3O4 nanoparticles allow external manipulation by a magnetic field. Since Ru(bpy)32+ is a typical electrochemiluminescence (ECL) reagent and it could still maintain such property when encapsulated in the bifunctional nanoparticle, we explored the feasibility of applying the as-prepared nanostructure to fabricating an ECL sensor; such method is simple and effective. We applied the prepared ECL sensor not only to the typical Ru(bpy)32+ co-reactant tripropylamine (TPA), but also to the practically important polyamines. Consequently, the ECL sensor shows a wide linear range, high sensitivity, and good stability.     

Surface modification of silica nanoparticles to reduce aggregation and nonspecific binding

In this article, a systematic study of the design and development of surface-modification schemes for silica nanoparticles is presented. The nanoparticle surface design involves an optimum balance of the use of inert and active surface functional groups to achieve minimal nanoparticle aggregation and reduce nanoparticle nonspecific binding. Silica nanoparticles were prepared in a water-in-oil microemulsion and subsequently surface modified via cohydrolysis with tetraethyl orthosilicate (TEOS) and various organosilane reagents. Nanoparticles with different functional groups, including carboxylate, amine, amine/phosphonate, poly(ethylene glycol), octadecyl, and carboxylate/octadecyl groups, were produced. Aggregation studies using SEM, dynamic light scattering, and zeta potential analysis indicate that severe aggregation among amine-modified silica nanoparticles can be reduced by adding inert functional groups, such as methyl phosphonate, to the surface. To determine the effect of various surface-modification schemes on nanoparticle nonspecific binding, the interaction between functionalized silica nanoparticles and a DNA chip was also studied using confocal imaging/fluorescence microscopy. Dye-doped silica nanoparticles functionalized with octadecyl and carboxylate groups showed minimal nonspecific binding. Using these surface-modification schemes, fluorescent dye-doped silica nanoparticles can be more readily conjugated with biomolecules and used as highly fluorescent, sensitive, and reproducible labels in bioanalytical applications.     

Sonochemical synthesis of cerium oxide nanoparticles-effect of additives and quantum size effect

Cerium oxide (CeO(2)) nanoparticles were prepared sonochemically, by using cerium nitrate and azodicarbonamide as starting materials, and ethylenediamine or tetraalkylammonium hydroxide as additives. The additives have a strong effect on the particle size and particle size distribution. CeO(2) nanoparticles with small particle size and narrow particle size distribution are obtained with the addition of additives; while highly agglomerated CeO(2) nanoparticles are obtained in the absence of additives. Monodispersed CeO(2) nanoparticles with a mean particle size of ca. 3.3 nm are obtained when tetramethylammonium hydroxide (TMAOH) is used as the additive and the molar ratio of cerium nitrate/azodicarbonamine/TMAOH is 1/1/1. Blue shifts of the absorption peak and the absorption edges of the products are observed in the UV-Vis absorption spectra as a result of the quantum size effect. The samples have been characterized using powder XRD, TEM, DLS, and absorption spectra.     

反相微乳液法制备纳米SiO2的研究

在壬基酚聚氧乙烯5醚(NP-5)/环己烷/氨水的反相微乳液体系中，进行正硅酸乙酯(TEOS)的水解、缩合反应，得到粒径在30～50 nm的单分散纳米SiO₂胶体。红外光谱法(FTIR)及透射电子显微镜(TEM)观察证明了纳米SiO₂粒子的生成。反相微乳液体系相图的研究表明，水相为氨水比纯水有较窄的W/O型微乳区。氨水微乳液是碱催化TEOS水解、缩合制备纳米SiO₂粒子的适宜体系。当体系中TEOS的浓度增大时，粒子的粒径随之增大。降低NP-5     

FloDots: luminescent nanoparticles

Luminescent dye-doped silica nanoparticles (FloDots) have been developed for ultrasensitive bioanalysis and diagnosis in the past several years. Those novel nanoparticles are highly luminescent and extremely photostable. In this paper, we review the preparation, characterization, bioconjugation and bioapplication of FloDots. All the results clearly demonstrated that FloDots have many advantages over currently used luminescent probes, such as traditional fluorophores and quantum dots.     

含长链不饱和酯基的三官能度溶胶-凝胶薄膜制备及发光氧气传感的研究

采用溶胶-凝胶法制备了含发光三吡啶钌[Ru(bpy)₃²⁺]分子的三官能度硅氧烷预聚液,并通过旋转涂敷及凝胶处理制备了高性能的薄膜,探讨了载体的微结构和发光分子的微环境效应。与传统的四官能度正硅酸乙酯(TEOS)/Ru(bpy)₃²⁺膜体系相比,含长链不饱和酯基的甲基丙烯酸丙酯基三甲氧基硅烷(PMA-TMS)/Ru(bpy)₃²⁺体系具有成膜性能好,气体的猝灭响应值高,响应时间短等特点。     

Eu3+,Tb3+掺杂荧光二氧化硅纳米粒子的合成及其结构、成分和荧光性质的调控

针对目前存在的稀土螯合物掺杂量低、发射吸收波长受到限制等问题,首先用设计好的敏化剂-配体-硅烷偶联剂来螯合稀土离子得到稀土螯合物,然后在反相微乳液中将上述稀土螯合物与正硅酸乙酯(TEOS)共同水解缩聚,合成了稀土掺杂的二氧化硅纳米粒子。通过这种方法,不仅实现了对FSNPs粒径、成分、发射波长的调控,还通过使用不同生色团和稀土离子,获得了对激发波长的调控能力。此外,进一步阐述了稀土掺杂FSNPs中的能量转移过程,提出了一种通过能级调节FSNPs荧光的新方法。     

Recovery of silver nanoparticles synthesized on AOT/C(12)E(4) mixed reverse micelles by antisolvent CO(2)

Silver nanoparticles were synthesized in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles in isooctane with tetraethylene glycol dodecyl ether (C(12)E(4)) as a cosurfactant. Recovery of the Ag particles from the reverse micelles by dissolving antisolvent CO(2) in the micellar solution was investigated. All the Ag particles in the reverse micelles could be precipitated by compressed CO(2) at suitable pressures, while the surfactants remained in the isooctane continuous phase, and well-dispersed Ag nanoparticles were obtained. The effects of operating conditions on the size and size distribution of the Ag particles were investigated. The particle size decreased with decreasing molar ratio (w) of water to surfactant. A higher CO(2) pressure in the recovery process favored production of smaller particles. A decrease in the molar ratio of reductant KBH(4) to AgNO(3) resulted in larger Ag particles with higher polydispersity.