A convenient approach to heterocyclic building blocks: synthesis of novel ring systems containing a [5,6]Pyrano[2,3-c]pyrazol-4(1H)-one moiety

Starting from commercially available educts, a straightforward synthetic route to new heterocyclic building blocks is exemplified with the one- or two-step synthesis of tri-, tetra-, or pentacyclic ring systems. Representatives of the following novel ring systems are prepared from 3-methyl-1-phenyl-2-pyrazolin-5-one and the corresponding o-halo-arenecarbonyl chloride using calcium hydroxide in refluxing 1,4-dioxane: pyrimidino[4',5':5,6]pyrano[2,3-c]pyrazol-4(1H)-one, thieno[3',2':5,6]pyrano[2,3c]pyrazol- 4-(1H)-one, thieno[3',4':5,6]pyrano[2,3-c]pyrazol-4(1H)-one, thieno[3',2':4',5']thieno[2',3':5,6]-pyrano[2,3-c]pyrazol-4(1H)-one, [1,3]dioxolo[5',6'][1]benzothieno[2',3':5,6]pyrano-[2,3-c]- pyrazol-4(1H)-one, pyridazino[4',3':5,6]pyrano[2,3-c]pyrazol-4(1H)-one and pyrazolo-[4',3':5',6']pyrido[3',4':5,6]pyrano[2,3-c]pyrazol-4(1H)-one. While the latter two ring systems are directly obtained due to a spontaneous intramolecular substitution reaction, in the other reactions uncyclised 4-aroylpyrazol-5-ols are produced, which are cyclised into the target heterocycles in a subsequent synthetic step (i.e. treatment with NaH in DMF). Detailed NMR spectroscopic investigations ((1)H-, (13)C-, (15)N-) with the obtained compounds were undertaken to unambiguously prove the new structures.     

In situ generation of vinyl allenes and its applications to one-pot assembly of cyclohexene, cyclooctadiene, 3,7-nonadienone, and bicyclo[6.4.0]dodecene derivatives with palladium-catalyzed multicomponent reactions

A novel tandem Pd-catalyzed cross-coupling and [4 + 4] cycloaddition sequence allows the rapid synthesis of eight-membered carbocycles starting from alpha-bromovinyl arenes and propargyl bromides in one reaction vessel. It is noteworthy that four components are assembled into one molecule via this procedure. In contrast to alpha-bromovinyl arenes, alpha-bromovinyl alkanes afforded tandem cross-coupling and homo [4 + 2] cycloaddition products. Subjecting an equimolar mixture of alpha-bromostyrene and 2-bromo-1-octene to propargyl bromides furnished the tandem Pd-catalyzed cross-coupling and hetero [4 + 2] cycloaddition product. Exposure of equimolar mixtures of alpha-bromovinyl arenes to allenylindium resulted in tandem a Pd-catalyzed cross-coupling and hetero [4 + 4] cycloaddition products. Synthesis of vinylallene from the reaction of vinyl triflate with allenylindium followed by Pd-catalyzed carbon monoxide insertion reaction gave the corresponding 3,7-nonadienone product via tandem Pd-catalyzed cross-coupling and [4 + 4 + 1] annulation. Tandem Pd-catalyzed cross-coupling, [4 + 4] cycloaddition, and [4 + 2] cycloaddition provided the rapid synthesis of bicyclo[6.4.0]dodecene derivatives starting from alpha-bromovinyl arenes, propargyl bromides, and dienophiles in one operation, in which five components were integrated into one molecule.     

Electron and singlet energy transfer in rigid supramolecular systems

Fluorescence spectroscopic measurements are reported on the N,N-dimethylaniline-{polynorbornyl (4, σ-bonds)}-dimethoxynaphthalene (DMA[4]DMN[2]) dyad and the H-isomer of the trichromophore, N,N-dimethylaniline-{polynorbornyl (4, σ-bonds)}-dimethoxynaphthalene-{polynorbornyl (8, σ-bonds)}-dicyanovinyl (DMA[4]DMN[8]-DCV) to probe electron transfer (ET) and singlet energy transfer (EnT) in these novel systems. In acetonitrile, the DMA[4]DMN[2] dyad is shown to undergo rapid and complete photoinduced ET following excitation of DMA and DMN chromophores. In n-hexane, very little ET is apparent for DMA[4]DMN[2] and this allows the observation of a very efficient singlet EnT process from locally excited DMA to the lowest DMN singlet excited state. A mode of vectorial excitation EnT from locally excited DMA to DMN followed by ET from DMN to DCV is observed for DMA[4]DMN[8]DCV in n-hexane.     

Synthesis of benzo[g]quinoline derivatives

In the condensation of 1, 2, 3, 4-tetrahydro-4-oxobenzo[g]quinollne with ammonia, which leads to the formation of 4-aminobenzo[g]quinoline, the by-products are benzo[g]quinoline (V) and 1, 2, 3, 4-tetrahydrobenzo]quinoline (VI), which are also obtained from 1, 2, 3, 4-tetrahydro-4hydroxybenzo[g]quinoline by its dehydration and the subsequent disproportionation of the dihydrobenzo[g]quinoline formed.For communication II, see [1].     

Room-temperature phosphorescence and energy transfer in luminescent multinuclear platinum(II) complexes of branched alkynyls

A series of luminescent branched platinum(II) alkynyl complexes, [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]C-C6H4C[triple bond]C}3C6H3] (R=C6H5, C6H4OMe, C6H4Me, C6H4CF3, C5H4N, C6H4SAc, 1-napthyl (Np), 1-pyrenyl (Pyr), 1-anthryl-8-ethynyl (HC[triple bond]CAn)), [1,3-{PyrC[triple chemical bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3], and [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-(HC[triple bond]C)C6H3], was successfully synthesized by using the precursors [1,3,5-{Cl(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] or [1,3-{Cl(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3]. The X-ray crystal structures of [1,3,5-{MeOC6H4C[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] and [1,8-{Cl(PEt3)2PtC[triple bond]C}2An] have been determined. These complexes were found to show long-lived emission in both solution and solid-state phases at room temperature. The emission origin of the branched complexes [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] with R=C6H5, C6H4OMe, C6H4Me, C6H4CF3, C5H4N, and C6H4SAc was tentatively assigned to be derived from triplet states of predominantly intraligand (IL) character with some mixing of metal-to-ligand charge-transfer (MLCT) (dpi(Pt)-->pi*(C[triple bond]CR)) character, while the emission origin of the branched complexes with polyaromatic alkynyl ligands, [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] with R=Np, Pyr, or HC[triple bond]CAn, [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3], [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-(HC[triple bond]C)C6H3], and [1,8-{Cl(PEt3)2PtC[triple bond]C}2An], was tentatively assigned to be derived from the predominantly 3IL states of the respective polyaromatic alkynyl ligands, mixed with some 3MLCT (d(pi)(Pt)-->pi*(C[triple bond]CR)) character. By incorporating different alkynyl ligands into the periphery of these branched complexes, one could readily tune the nature of the lowest energy emissive state and the direction of the excitation energy transfer.     

Tetranuclear [Rh4(mu-PyS2)2(diolefin)4] complexes as building blocks for new inorganic architectures: synthesis of coordination polymers and heteropolynuclear complexes with electrophilic d8 and d10 metal fragments

The reaction of [Rh4(mu-PyS2)2(cod)4] (PyS2 = 2,6-pyridinedithiolate, cod = 1,5-cyclooctadiene) with CF3SO3Me gave the cationic complex [Rh(4)(mu-PyS(2)Me)(2)(cod)4][CF3SO3]2 (1) with two 6-(thiomethyl)pyridine-2-thiolate bridging ligands from the attack of Me+ at the terminal sulfur atoms of the starting material. Under identical conditions [Rh4(mu-PyS2)2(tfbb)4] (tfbb = tetrafluorobenzobarrelene) reacted with CF3SO3Me to give the mixed-ligand complex [Rh(4)(mu-PyS2)(mu-PyS2Me)(tfbb)4][CF3SO3] 2. The nucleophilicity of the bridging ligands in the complexes [Rh4(mu-PyS2)2(diolefin)4] was exploited to prepare heteropolynuclear species. Reactions with [Au(PPh3)(Me2CO)][ClO4] gave the hexanuclear complexes [(PPh3)2Au2Rh4(mu-PyS2)2(diolefin)4][ClO4]2 (diolefin = cod (3), tfbb (4)). The structure of 4, solved by X-ray diffraction methods, showed the coordination of the [Au(PPh3)]+ fragments to the peripheral sulfur atoms in [Rh4(mu-PyS2)2(diolefin)4] along with their interaction with the neighbor rhodium atoms. Neutral coordination polymers of formula [ClMRh4(mu-PyS2)2(diolefin)4]n (M = Cu (5, 6), Au (7)) result from the self-assembly of alternating [Rh4(mu-PyS2)2(diolefin)4] ([Rh4]) blocks and MCl linkers. The formation of the infinite polymetallic chains was found to be chiroselective for M = Cu; one particular chain contains exclusively homochiral [Rh4] complexes. Cationic heterometallic coordination polymers of formula [MRh4(mu-PyS2)2(diolefin)4]n[BF4]n (M = Ag (8, 9), Cu (10, 11)) and [Rh5(mu-PyS2)2(diolefin)5]n[BF4]n (12, 13) result from the reactions of [Rh4] with [Cu(CH2CN)4]BF4, AgBF4, and [Rh(diolefin)(Me2CO)2]BF4, respectively. The heterometallic coordination polymers exhibit a weak electric conductivity in the solid state in the range (1.2-2.8) x 10(-7) S cm(-1).     

Selective synthesis of functionalized thia- and oxacalix[2]arene[2]pyrimidines

Functionalized oxacalix[m]arene[n]pyrimidines have been synthesized by S(N)Ar on 4,6-dihalopyrimidine building blocks. Depending on the S(N)Ar conditions, either a mixture of oxacalix[n]arenes, ranging from oxacalix[4]- up to oxacalix[12]arene, could be prepared or the oxacalix[4]arene could be synthesized selectively in a high yield. The electrophilic (pyrimidine) and the nucleophilic components could both be varied, allowing the preparation of functionalized oxacalix[4]arenes. Moreover, the procedure also gives access to the analogous thiacalix[4]arenes.     

Mass spectra of certain spiro compounds with a central atom of an element of group IVB

Conclusions The mass spectra of 4-silaspiro[3, 3]heptane, 4-silaspiro[3,4]octane, 4-silaspiro[3,5]nonane, as well as spiro[2,3]hexane and spiro[2,4]heptane, were obtained and compared with the known spectra of 4-germaspiro[3,4]octane, 5-stanna- and 5-plumbaspiro[4,4]nonanes, and spiroalkanes.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 1984–1989, September, 1973.     

Transformations of 5-methyl-6-carbethoxy-3,4-dihydrothieno-[2,3-d]pyrimidine for synthesis of 4-methoxy-, 4-alkylamino-, and other derivatives of thieno[2,3-d]pyrimidine

4-Chloro derivatives of thieno[2,3-d]pyrimidine are formed by the action of phosphorus oxychloride on 5-methyl- and 5-methyl-6-carbethoxythieno[2,3-d]pyrimidin-4-ones. Action of nucleophilic reagents (methanol, sodium methylate, primary and secondary amines) on these chloro derivatives gave 4-methoxy-, 4-alkylamino-, and 4-dialkylamino substituted thieno[2,3-d]pyrimidines. It was found that 4-methoxy derivatives of thieno[2,3-d]pyrimidines undergo a thermal rearrangement into 3-methyl-substituted thieno[2,3-d]pyrimid-4-ones. In the bromination of 5-methyl-4-chloro- and 5-methyl-4-methoxy-substituted thieno[2,3-d]pyrimidines by N-bromosuccinimide, 5-bromomethyl derivatives of thieno[2,3-d]pyrimidine are formed, from which, by the action of primary and secondary amines, 5-aminomethyl-substituted thieno[2,3-d]pyrimidines were obtained. A synthesis of 1,2,3,4-tetrahydro-1,3-diazepino[4a,10-d,e] thieno[2,3-d]pyrimidines was also carried out.Deceased.Translated from Khimiya Geterotsilicheskikh Soedinenii, No. 7, pp. 925–928, July, 1985.     

Synthesis, characterization, and chiral properties of CoIII2AgI3 pentanuclear, CoIII4ZnII4 octanuclear, and CoIII mononuclear complexes with aza-capped hexadentate-N3S3 thiolate ligands: crystal structures of

The reaction of an S-bridged Co2(III)Ag3(I) pentanuclear complex, [Ag3[Co(aet)3]2][BF4]3 (aet = NH2CH2CH2S-), with paraformaldehyde in basic acetonitrile, followed by adding aqueous ammonia, produced an aza-capped Co2(III)-Ag3(I) complex, [Ag3[Co(L)]2]3+ ([1]3+) (L = N(CH2NHCH2CH2S-)3). The crystal structure of [1]3+ was determined by X-ray crystallography. [1][PF6]3 x H2O, empirical formula C18H44Ag3Co2F18N8OP3S6, crystallizes in the tetragonal space group 142m with a = 13.012(1) A, c = 24.707(2) A, and Z = 4. In [1]3+ the two aza-capped [Co(L)] units are linked by three Ag(I) atoms, such that the two Co(III) atoms are encapsulated in a macrobicyclic metallocage, [Ag3(I)(L)2]3-. [1]3+ was converted to an aza-capped Co4(III)Zn4(II) octanuclear complex, [Zn4O[Co(L)]4]6+ ([2]6+), by reaction with I- in the presence of Zn2+ and ZnO in water. The crystal structure of [2]6+ was also determined by X-ray crystallography. [2][PF6]6 x 8H2O, empirical formula C36H100Co4F36N16O9P6S12Zn4, crystallizes in the monoclinic space group P2(1/n) with a = 14.33(7) A, b = 25.67(10) A, c = 24.83(6) A, beta = 101.3(3) degrees , and Z = 4. In [2]6+ each of four [Co(L)] units is bound to each trigonal Zn3(II) face of the tetrahedral [Zn4(II)O]6+ core, such that each Co(III) atom is encapsulated in a macrobicyclic [Zn4(II)O(L)] fragment. Treatment of [2]6+ with a basic aqueous solution resulted in a cleavage of the Zn-S bonds to produce an aza-capped Co(III) mononuclear complex, [Co(L)] ([3]), from which [1]3+ is readily reproduced by the reaction with Ag+ in water. All the reactions were found to proceed with retention of the absolute configuration (delta or lambda) of the Co(III) chiral centers; deltadelta-[1]3+, deltadeltadeltadelta-[2]6+, and A-[3] were derived from deltadelta-[Ag3[Co(aet)3]2]3+. The contributions to circular dichroism (CD) from the triple helicity in [1]3+, besides from the asymmetric N and S donor atoms and the Co(III) chiral centers in [1]3+ and [2]6+, were estimated by comparing the CD spectra of deltadelta-[1]3+, deltadeltadeltadelta-[2]6+, and delta-[3].     

杯芳烃与NO2硝化反应的研究

系统地研究了羟基杯[n]芳烃、甲氧基杯[n]芳烃和对特丁基杯[n]芳烃(n＝4, 6, 8)与NO₂气体的硝化反应, 发现可以成功地得到25,26,27,28-四羟基杯[4]芳烃、37,38,39,40,41,42-六羟基杯[6]芳烃以及25,26,27,28-四甲氧基杯[4]芳烃的对位全硝化产物, 产率分别为90%, 70%和40%; 尤其是25,26,27,28-四羟基杯[4]芳烃与NO₂的反应20 min即可完成. 认为共振式酚氧负离子结构是影响该类硝化反应的关键, 并对反应机理进行了探讨.     

Electronic spectral studies of molybdenyl complexes. 2. MCD spectroscopy of [MoOS4]- centers

Magnetic circular dichroism (MCD) and absorption spectroscopies have been used to probe the electronic structure of [PPh4][MoO(p-SC6H4X)4] (X = H, Cl, OMe) and [PPh4][MoO(edt)2] complexes (edt = ethane-1,2-dithiolate). The results of density functional calculations (DFT) on [MoO(SMe)4]- and [MoO(edt)2]- model complexes were used to provide a framework for the interpretation of the spectra. Our analysis shows that the lowest energy transitions in [MoVOS4] chromophores (S4 = sulfur donor ligand) result from S-->Mo charge transfer transitions from S valence orbitals that lie close to the ligand field manifold. The energies of these transitions are strongly dependent on the orientation of the S lone-pair orbitals with respect to the Mo atom that is determined by the geometry of the ligand backbone. Thus, the lowest energy transition in the MCD spectrum of [PPh4][MoO(p-SC6H4X)4] (X = H) occurs at 14,800 cm-1, while that in [PPh4][MoO(edt)2] occurs at 11,900 cm-1. The identification of three bands in the absorption spectrum of [PPh4][MoO(edt)2] arising from LMCT from S pseudo-sigma combinations to the singly occupied Mo 4d orbital in the xy plane suggests that there is considerable covalency in the ground-state electronic structures of [MoOS4] complexes. DFT calculations on [MoO(SMe)4]- reveal that the singly occupied HOMO is 53% Mo 4dxy and 35% S p for the equilibrium C4 geometry. For [MoO(edt)2]- the steric constraints imposed by the edt ligands result in the S pi orbitals being of similar energy to the Mo 4d manifold. Significant S pseudo-sigma and pi donation may also weaken the Mo identical to O bond in [MoOS4] centers, a requirement for facile active site regeneration in the catalytic cycle of the DMSO reductases. The strong dependence of the energies of the bands in the absorption and MCD spectra of [PPh4][MoO(p-SC6H4X)4] (X = H, Cl, OMe) and [PPh4][MoO(edt)2] on the ligand geometry suggests that the structural features of the active sites of the DMSO reductases may result in an electronic structure that is optimized for facile oxygen atom transfer.     

Syntheses of 3-[5-Methyl-1-(4-Methylphenyl)-1,2,3-Triazol-4-yl]-6-Substituted-s-Triazolo[3,4-b]-1,3,4-Thiadiazoles

1,2,3-Triazole derivatives have been reported as inhibiting tumor proliferation, invasion, and metastasis^[1]. The fused l,3,4-triazolo[3,4-b]-1,3,4-thiadiazoles derivatives show various biological effects such as antifungal^[2], antibacterial, hypotensive and CNS depressant activities^[3]. We have reported several 6-aryl-3-[5-methyl-1-(4-methylphenyl)-1,2,3-triazol-4-yl]-s-triazolo[3,4-b]-1,3,4-thiadiazoles in the previous paper^[4]. The novel 6-aryl-3-[5-methyl-1-(4-methylphenyl)-1,2,3-triazol-4-yl]-s-triazolo[2,4-b]-1,3,4-thiadiazoles 6a-j have been synthesized by the condensation of 4-amino-5-mercapto-3-[5-methyl-1-(4-methylphenyl)-1,2,3-triazol-4-yl]-s-triazole 5 with various aromatic carboxylic acids in the presence of phosphorus oxychloride. The mercaptotriazole 5 was prepared from 4,the latter being prepared from 1 throng 2 and 3. The title compounds 6 were depicted in scheme 1. The structures of these compounds were established by elemental analysis, NMR, MS and IR techniques.     

Theoretical insight into electronic structures and spectroscopic properties of [Pt2(pop)4]4-, [Pt2(pcp)4]4-, and related derivatives (pop = P2O5H2(2-) and pcp = P2O4CH4(2-))

The structures of [Pt2(pop)4]4-, [Pt2(pcp)4]4-, and related species [Pt2(pop)4X2]4- and [Pt2(pop)4]2- in the ground states (pop = P2O5H2(2-), pcp = P2O4CH4(2-), and X = I, Br, and Cl) were optimized using the second-order M?ller-Plesset perturbation (MP2) method. It is shown that the Pt-Pt distances decrease in going from [Pt2(pop)4]4- to [Pt2(pop)4X2]4- to [Pt2(pop)4]2-. This is supported by the analyses of their electronic structures. The calculated aqueous absorption spectra at the time-dependent density functional theory (TD-DFT) level agree with experimental observations. The unrestricted MP2 method was employed to optimize the structures of [Pt2(pop)4]4- and [Pt2(pcp)4]4- in the lowest-energy triplet excited states. The Pt-Pt contraction trend is well reproduced in these calculations. For [Pt2(pop)4]4-, the Pt-Pt distance decreases from 2.905 A in the ground state to 2.747 A in the excited state, which is comparable to experimental values of 2.91-2.92 A and 2.64-2.71 A, respectively. On the basis of the excited-state structures of such complexes, TD-DFT predicts the solution emissions at 480 and 496 nm, which is closer to the experimental values of 512 and 510 nm emissions, respectively.     

Synthesis, characterization, and structure of cyclopenta[c]thiophenes and their manganese complexes

1,3-Diaryl-4H-cyclopenta[c]thiophenes are efficiently prepared from 1,2-diaroylcyclopentadienes by use of Lawesson's reagent. eta5-Cyclopenta[c]thienyl complexes, [Mn(eta5-SC7H3-1,3-R2)(CO)3] (R = Me, Ph), are prepared in high yield by ligand substitution reactions of [MnBr(CO)5] with [SnMe3(SC7H3-1,3-R2)]. Alternatively, thiation with P4S10/NaHCO3 converts [Mn{eta5-1,2-C5H3(COR)2)(CO)3] to [Mn(eta5-SC7H3-1,3-R2)(CO)3] (R = Ph, 4-tolyl, 4-MeOC6H4, benzo[2,3-b]thienyl). The molecular structures of complexes with R = Me, Ph show planar eta5-cyclopenta[c]thienyl ligands, with the manganese atom slightly displaced away from the ring-fusion bond.     

Self-recognition, structure, stability, and guest affinity of pyrogallol[4]arene and resorcin[4]arene capsules in solution

In the present study, we used diffusion NMR to probe the structures and characteristics of the products obtained from the self-assembly of resorcin[4]arenes 1a and 1b and pyrogallol[4]arenes 2a and 2b in CDCl(3) solutions. It was found that all four molecules self-assemble into hexameric capsules. The hexameric capsules of pyrogallol[4]arenes 2a and 2b were found to be more stable than the capsules of resorcin[4]arenes 1a and 1b in polar media. We also studied the role of water molecules in the self-assembly of the different capsules and found that water molecules are part of the hexameric capsules of resorcin[4]arenes 1a and 1b but not in the capsules of pyrogallol[4]arenes 2a and 2b. It was found that the self-assembly process between the resorcin[4]arenes and pyrogallol[4]arenes proceeds with self-recognition. When mixing two macrocycles of different types in a chloroform solution, no heterohexamers are formed, only the capsule constructed from the same macrocycle is detected. However, when two resorcin[4]arenes (i.e., 1a and 1b) or two pyrogallol[4]arenes (i.e., 2a and 2b) are mixed, heterohexamers are formed over time. In addition, we found that resorcin[4]arenes and pyrogallol[4]arenes differ significantly in their guest affinity. The capsules of 1a and 1b can accommodate both the tertiary alkylamines and their respective ammonium salts, while the capsules of 2a and 2b encapsulate only the neutral tertiary alkylamines.     

Synthesis of analogs of 5(4)-aminoimidazole-4(5)-carboxamide and purines

4-Chloroimidazo[4,5-d]-1,2,3-triazine was obtained by oxidative chlorinatlon from imidazo[4,5-d]-1,2,3-triazine-4-thione, and its reaction with nucleophilic agents and cleavage of the triazine ring to give 5-diazoimidazole-4-carbonitrile were studied. The newly synthesized diazoimidazole was subjected to C- and N-diazo coupling. It was established that 3-methylimidazo[4,5-d]-1,2,3-triazine-4-imine, formed by reaction of the diazo compound with methylamine, is capable of recyclization to 4-methylaminoimidazo[4,5-d]-1,2,3-triazine.See [1] for communication IV.Translated from Khimiya Getereotsiklicheskikh Soedinenii, No. 4, pp. 556–559, April, 1976.     

Synthesis, reactivity, and structure of strictly homologous 18 and 19 valence electron iron nitrosyl complexes

The 18 and 19 valence electron (VE) nitrosyl complexes [Fe(NO)('pyS4')]BF4 ([1]BF4) and [Fe(NO)('pyS4')] (2) have been synthesized from [Fe('pyS4')]x ('pyS4'(2-) = 2,6-bis(2-mercaptophenylthiomethyl)pyridine(2-)) and either NOBF4 or NO gas. Complex [1]BF4 was also obtained from [Fe(CO)('pyS4')] and NOBF4. The cation [1]+ is reversibly reduced to give 2. Oxidation of 2 by [Cp2Fe]PF6 afforded [Fe(NO)('pyS4')]PF6 ([1]PF6). The molecular structures of [1]PF6 and 2 were determined by X-ray crystallography. They demonstrate that addition of one electron to [1]+ causes a significant elongation of the Fe-donor atom bonds and a bending of the FeNO angle. Density functional calculations show that the unpaired electron in 2 occupies an orbital, which is antibonding with respect to all Fe-ligand interactions. As expected from qualitative Molecular Orbital (MO) theory, it has a large contribution from a pi* type NO orbital. The nu(NO) frequency decreases from 1893 cm(-1) in [1]BF4 to 1648 cm(-1) in 2 (in KBr). The antibonding character of the unpaired electron explains the ready reaction of 2 with excess NO to give [Fe(NO)2('pyS4')] (3), the facile NO/CO exchange of 2 to afford [Fe(CO)('pyS4')], and the easy oxidation of 2 to [1]+.     

新型苯并咪唑杂多酸盐离子液体的制备及其在催化合成己二酸中的应用

以1-丁基苯并咪唑为起始原料,合成了1-丁基-3-(4-磺酸基丁基)苯并咪唑內盐(1),1-丁基-3-羧甲基苯并咪唑氯盐(2)和1,3-二丁基苯并咪唑溴盐(3);1~3分别与硅钨酸、磷钨酸和磷钼酸在水或者乙醇中反应,合成了5种新型的杂多酸盐离子液体——1-丁基-3-(4-磺酸基丁基)苯并咪唑硅钨酸盐(4a),1-丁基-3-(4-磺酸基丁基)苯并咪唑磷钨酸盐(4b),1-丁基-3-(4-磺酸基丁基)苯并咪唑磷钼酸盐(4c),1-丁基-3-羧甲基苯并咪唑硅钨酸盐(5)和1,3-二丁基苯并咪唑硅钨酸盐(6),其结构经1H NMR,13C NMR和IR表征。并考察了4~6在30%H_2O_2催化氧化环己烯制备己二酸反应中的催化效果。实验结果表明:4b的催化效果最好。在最佳反应条件[环己烯20 mmol,4b 0.16 mmol,n(环己烯)∶n(H2O2)∶n(ILs)=1∶4.4∶0.008]下,己二酸产率71%。     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.