Solution and solid-state properties of highly fluorescent dithieno[3,2-b:2',3'-d]pyrrole-based oligothiophenes

Dithieno[3,2-b:2',3'-d]pyrrole-based terthiophene and quaterthiophene analogues have been prepared from N-functionalized dithieno[3,2-b:2',3'-d]pyrroles (DTPs) via Stille coupling. In order to thoroughly study the structure-function property relationships within these DTP-based oligothiophenes, an oligomer series was prepared that allows for the investigation of a number of structural effects including chain length, thiophene functionalization, and pyrrole N-functionalization. As pyrrole N-functionalization allows the incorporation of solubilizing side chains without the unwanted steric interactions that typically reduce backbone planarity, the effect of the bulk of these side chains on the optical properties in both solution and the solid state has been carefully investigated. The DTP-based quaterthiophene, N-tert-butyl-2,6-bis(2'-thienyl)dithieno[3,2-b:2',3'-d]pyrrole was characterized via X-ray crystallography and was found to crystallize in the monoclinic space group P2(1)/c with a = 17.489(4) ?, b = 7.8855(16) ?, c = 14.540(3) ?, β = 108.37(3)°, and Z = 4. The effect of side chains on the solid-state packing of the DTP-based quaterthiophenes was further investigated through X-ray diffraction of solution processed thin films. In comparison to the parent oligothiophenes, the resulting DTP-based systems exhibit enhanced fluorescence efficiencies in solution (up to 66%) and measurable solid-state emission from thin films.     

Highly fluorescent oligothiophenes through the incorporation of central dithieno[3,2-b:2',3'-d]pyrrole units

[structures: see text] Dithieno[3,2-b:2',3'-d]pyrrole-based terthiophene (2a-c) and quaterthiophene (3a-c) analogues have been prepared from dithieno[3,2-b:2',3'-d]pyrrole (1) via Stille coupling utilizing a one-pot method. In comparison to the parent oligothiophenes (T(n), where n = 2-4), the resulting dithieno[3,2-b:2',3'-d]pyrrole-based systems exhibit enhanced fluorescence efficiencies in solution (up to 53%). These new oligomeric systems also allow the incorporation of solubilizing side chains without the negative steric interactions that typically reduce backbone planarity.     

A simple and efficient route to N-functionalized dithieno[3,2-b:2',3'-d]pyrroles: fused-ring building blocks for new conjugated polymeric systems

A general synthetic route has been developed for the simple and efficient preparation of N-functionalized dithieno[3,2-b:2',3'-d]pyrroles. These synthetic methods utilize N-functionalized N-(3'-thienyl)-3-aminothiophenes produced from the Pd-catalyzed amination of 3-bromothiophene with primary amines, followed by a one-pot bromination/cyclization process. This combination allows the convenient preparation of a variety of N-functionalized dithieno[3,2-b:2',3'-d]pyrroles (where substituent = hexyl, octyl, decyl, tert-butyl, and p-hexylphenyl) in good yield (65-82%). Characterization of the structure and reactivity of this class of compounds is also described, including electrochemical and photophysical data for all compounds and X-ray structural data for the octyl-, tert-butyl-, and p-hexylphenyl-functionalized compounds.     

Planar beta-linked oligothiophenes based on thieno[3,2-b]thiophene and dithieno[3,2-b:2',3'-d]thiophene fused units

A series of planar beta-linked oligothiophenes based on thieno[3,2-b]thiophene and dithieno[3,2-b:2',3'-d]thiophene fused units were synthesized. The optical data indicate a blue shift of the absorption maximum in comparison to the alpha-linked analogues due to cross-conjugation between fused rings. The crystal structures of 3,3'-bi(thieno[3,2-b]thiophene) and 3,3';6',3"-ter(thieno-[3,2-b]thiophene) reveal edge-to-face pi-stacked dimer motifs, whereas the crystal structure of 3,3'-bis(dithieno[3,2-b:2',3'-d]thiophene) consists of face-to-face pi-stacked molecules. [structure: see text]     

Reduced band gap dithieno[3,2-b:2',3'-d]pyrroles: new n-type organic materials via unexpected reactivity

Direct addition of tetracyanoethylene to N-(p-hexylphenyl)dithieno[3,2-b:2',3'-d]pyrrole yields not only the aromatic mono- and bis-tricyanovinyl-substituted products but also a quinoidal product with dicyanomethylene groups. The analogous reaction with dithieno[3,2-b:2',3'-d]thiophene yields exclusively the aromatic mono-tricyanovinyl product. The aromatic and quinoidal products possess red-shifted absorptions, increased electron affinities, and favorable pi-stacking motifs in comparison to the unsubstituted oligomers.     

From model compounds to extended pi-conjugated systems: synthesis and properties of dithieno[3,2-b:2',3'-d]phospholes

To explore their suitability for applications in molecular optoelectronics and as sensory materials, novel dithieno[3,2-b:2',3'-d]phospholes have been synthesized and their reactivity and properties investigated. An efficient two-step synthesis allowed for a modular assembly of differently functionalized compounds. The dithieno[3,2-b:2',3'-d]phosphole system exhibits extraordinary optoelectronic properties with respect to wavelength, intensity, and tunability. Owing to the nucleophilic nature of the central phosphorus atom, its significant electronic influence on the conjugated pi system can be altered selectively by chemically facile modifications such as oxidation or complexation with Lewis acids or transition metals. All the dithienophosphole species presented show very strong blue photoluminescence with excellent quantum yield efficiencies supporting their potential utility as blue-light emitting components in organic light emitting diodes (OLEDs). Furthermore, depending on the electronic nature of the phosphorus center, the materials exhibit distinctive optoelectronic properties suggesting that the dithieno[3,2-b:2',3'-d]phosphole system may be useful as sensory material. Theoretical calculations, including time-dependent DFT methods, revealed the excellent predictability of the structures and optoelectronic properties of the functionalized dithienophospholes allowing the design of future dithieno[3,2-b:2',3'-d]phosphole-based materials to be "stream-lined". By using tin-functionalized dithienophosphole monomers, a strategy, which involves Stille coupling, towards extended pi-conjugated materials with significantly redshifted optoelectronic properties is also presented.     

Highly disordered polymer field effect transistors: N-alkyl dithieno[3,2-b:2',3'-d]pyrrole-based copolymers with surprisingly high charge carrier mobilities

A series of novel electroactive and photoactive conjugated copolymers based on N-alkyl dithieno[3,2-b:2',3'-d]pyrroles (DTP) and thiophene (TH) units (DTP-co-THs) were synthesized using a Stille coupling reaction and exhibited molecular weights of 1.6 x 10(4) to 5.0 x 10(4) g/mol. The incorporation of soluble substituted thiophenes and planar DTP units resulted in low band gap, highly conductive polymers. DTP-co-THs exhibited excellent solubility in common organic solvents and formed high-quality films. Optical characterization revealed that the band gaps of DTP-co-THs were between 1.74 and 2.00 eV, lower than regioregular poly(3-alkylthiophenes). Electrochemical characterization showed that the HOMO energy levels of DTP-co-THs are between -4.68 and -4.96 eV. When doped, DTP-co-THs exhibited high conductivities up to 230 S/cm with excellent stability. The different thiophene substituent patterns' effect on the polymers' optical and electronic properties was then examined by density functional theory computations. The microstructure and surface morphologies of poly(2,6-(4-dodecyl-4H-bisthieno[3,2-b:2',3'-d]pyrrole)-random-2,5-(3-dodecylthiophene)) (P4) and poly(2-(4,4'-didodecyl-2,2'-bithiophen-5-yl)-4-octyl-4H-bisthieno[3,2-b:2',3'-d]pyrrole) (P6) thin films were studied by X-ray diffraction and atomic force microscopy. As-cast P4 and P6 thin films exhibited poorly defined, randomly ordered lamellar structure that improved significantly after thermal annealing. Field effect transistor devices fabricated from P4 and P6 showed typical p-channel transistor behavior. Interestingly, the mobilities of as-cast, less ordered samples were much higher than those observed after annealing. The highest values of maximum and average mobilities were observed for the polymer P6 as-cast (0.21 and 0.13 cm(2) V(-1) s(-1), respectively). One of our goals was to test the idea that high mobility and excellent electrical and structural reproducibility could perhaps be achieved by the creation of amorphous pi-conjugated materials that could possess long arrange pi connectivity on the microscopic scale. The results of these studies strongly suggest that the presence of highly ordered microcrystalline structures in thin films of organic semiconductors is not necessary for excellent performance of organic transistors.     

Luminescent digold ethynyl thienothiophene and dithienothiophene complexes; their synthesis and structural characterisation

A series of protected and terminal dialkynes with extended pi-conjugation through the fused oligothienyl linker unit in the backbone, 2,5-bis(trimethylsilylethynyl)thieno[3,2-b]thiophene 1a, 5,5'-bis(trimethylsilylethynyl)dithieno[3,2-b:2',3'-d]thiophene 1b, 2,5-bis(ethynyl)thieno[3,2-b]thiophene 2a, 5,5'-bis(ethynyl)dithieno[3,2-b:2',3'-d]thiophene 2b, has been synthesized and characterised. The digold alkynyl complexes [(Ph3P)Au(C[triple bond]C)(C6H2S2)(C[triple bond]C)Au(PPh3)] 3a and [(Ph3P)Au(C[triple bond]C)(C8H2S3)(C[triple bond]C)Au(PPh3)] 3b have then been prepared by the reaction of two equivalents of Ph3PAuCl and a methanolic KOH solution of 1a and 1b, respectively. The complexes have been characterised spectroscopically. The crystal structures show that the gold centres adopt a linear two-coordinate geometry appropriate for Au(i) complexes. Within the crystals adjacent molecules are linked by Au...S intermolecular interactions in the range 3.48-3.89 A, but there are no short Au...Au contacts. The absence of Au...Au interactions in solution is confirmed by UV/visible absorption and emission spectroscopy, the spectra being dominated by ligand-centred pi-pi* interactions.     

Dithienothiophene (DTT)-based dyes for dye-sensitized solar cells: synthesis of 2,6-dibromo-DTT

A one-pot synthesis of 2,6-dibromodithieno[3,2-b;2',3'-d]thiophene (dibromo-DTT, 4) was developed. A key step was bromodecarboxylation of DTT-2,6-dicarboxylic acid, obtained by saponification of the diester 1. The donor-acceptor dye DAHTDTT (13), based on a central 2,6-bis[2'-(3'-hexylthienyl)]dithieno[3,2-b;2',3'-d]thiophene core (9), was prepared and incorporated in a dye-sensitized solar cell (DSC), which exhibited an energy conversion efficiency of 7.3% with V(oc) of 697 mV, J(sc) of 14.4 mA/cm(2), and ff of 0.73 at 1 sun.     

Photochromic oligothienoacene derivatives with photo-switchable luminescence properties and computational studies

Photochromic thieno[3,2-b]thiophenes and dithieno[3,2-b:2',3'-d]thiophene with photo-switchable luminescence properties have been synthesized using a Suzuki cross-coupling reaction; their electronic structures, and photochromic and luminescence behaviour have also been studied.     

Synthesis of dithieno[2,3-b:4',3'-d]siloles and their selective bromination

The efficient synthesis of novel unsymmetrical dithienosiloles, 7,7-dimethyl-4,6-di(trimethylsilyl)-dithieno[2,3-b:4',3'-d]silole (1) and 7,7-dimethyl-2,4,6-tri(trimethylsilyl)-dithieno[2,3-b:4',3'-d]silole (2) has been developed by intramolecular silole formation with 4,4'-dibromo-2,2',5,5'-tetrakis(trimethylsilyl)-[3,3']bithienyl (3) as the starting material in the presence of t-BuLi. Upon treatment with N-bromosuccinimide (NBS) under controlled conditions, dithieno[2,3-b:4',3'-d]silole was selectively brominated to produce mono-, di-, and tribrominated dithieno[2,3-b:4',3'-d]siloles in good yields. The crystal structures of the title compounds are described.     

Improved synthesis of dithieno[3,2-b:2',3'-d]thiophene (DTT) and derivatives for cross coupling

An improved synthesis of dithieno[3,2-b:2',3'-d]thiophene (DTT) and its 2,6- and 3,5-dibromo derivatives has been devised; Stille cross coupling of 2,5-(bistrimethylstannyl)-DTT afforded the oligomer 12.     

Bis[bis-(4-alkoxyphenyl)amino] derivatives of dithienylethene, bithiophene, dithienothiophene and dithienopyrrole: palladium-catalysed synthesis and highly delocalised radical cations

Five diamines with thiophene-based bridges--(E)-1,2-bis{5-[bis(4-butoxyphenyl)amino]-2-thienyl}ethylene (1), 5,5'-bis[bis(4-methoxyphenyl)amino]-2,2'-bithiophene (2), 2,6-bis[bis(4-butoxyphenyl)amino]dithieno[3,2-b:2',3'-d]thiophene (3), N-(4-tert-butylphenyl)-2,6-bis[bis(4-methoxyphenyl)amino]dithieno[3,2-b:2',3'-d]pyrrole (4 a) and N-tert-butyl-2,6-bis[bis(4-methoxyphenyl)amino]dithieno[3,2-b:2',3'-d]pyrrole (4 b)--have been synthesised. The syntheses make use of the palladium(0)-catalysed coupling of brominated thiophene species with diarylamines, in some cases accelerated by microwave irradiation. The molecules all undergo facile oxidation, 4 b being the most readily oxidised at about -0.4 V versus ferrocenium/ferrocene, and solutions of the corresponding radical cations were generated by addition of tris(4-bromophenyl)aminium hexachloroantimonate to the neutral species. The near-IR spectra of the radical cations show absorptions characteristic of symmetrical delocalised species (that is, class III mixed-valence species); analysis of these absorptions in the framework of Hush theory indicates strong coupling between the two amine redox centres, stronger than that observed in species with phenylene-based bridging groups of comparable length. The strong coupling can be attributed to high-lying orbitals of the thiophene-based bridging units. ESR spectroscopy indicates that the coupling constant to the amino nitrogen atoms is somewhat reduced relative to that in a stilbene-bridged analogue. The neutral species and the corresponding radical cations have been studied with the aid of density functional theory and time-dependent density functional theory. The DFT-calculated ESR parameters are in good agreement with experiment, while calculated spin densities suggest increased bridge character to the oxidation in these species relative to that in comparable species with phenylene-based bridges.     

Cationic dithieno[3,2-b:2',3'-d]phospholes: a new building block for luminescent, conjugated polyelectrolytes

Cationic dithieno[3,2-b:2',3'-d]phospholes are accessible very efficiently by methylation of the phosphorus center. Further functionalization with bromo substituents in 2,6-positions affords a polymerizable monomer that can be copolymerized with a difunctionalized fluorene in a Suzuki-Miyaura-type cross-coupling protocol. The monomers as well as the resulting conjugated polyelectrolyte based on the phospholium units show very intriguing photoluminescence properties, even in the solid state. [structure: see text]     

Synthesis and unexpected reactivity of Si-H functionalized dithieno[3,2-b:2',3'-d]phospholes

[reaction: see text]. Si-H functionalized, blue light-emitting dithieno[3,2-b:2',3'-d]phospholes are accessible by reaction of an appropriate bithiophene precursor with a dichlorophosphane. Subsequent functionalization of the central phosphorus center allows for a fine-tuning of the optoelectronic properties of the material. Pt-catalyzed reaction of the Si-H functionalities with alkynes affords the hydrosilation products including a polymer by reaction with 1,7-octadiyne. By contrast, the absence of any substrate leads to the exclusive formation of a polymer via dehydrogenative homocoupling.     

Highly sensitive sensory materials for fluoride ions based on the dithieno[3,2-b:2',3'-d]phosphole system

[structure: see text]. The newly developed functionalization of an unsubstituted dithieno[3,2-b:2',3'-d]phosphole at the 5,5'-positions gives access to bis(pinacoleboryl) species that can be utilized as sensory materials for fluoride ions. The fluoride-triggered response of the air- and moisture-stable boryl-functionalized dithienophosphole oxide manifests itself in the generation of a new fluorescence emission that can be detected at very low analyte concentrations (ppm) or even with the naked eye upon irradiation with UV light (366 nm).     

An efficient synthesis of novel pyridothieno-fused thiazolo[3,2-a]pyrimidinones via Pictet–Spengler reaction

An efficient method for the synthesis of novel pyrido[3',2':4',5']thieno[3',2':2,3]pyrido [4,5:d][1,3]thiazolo[3,2-a]pyrimidine-4-one derivatives (5) has been developed using a Pictet-Spengler reaction between 2-(3-aminothieno[2,3-b]pyridin-2-yl)thiazolo[3,2-a] pyrimidin-5-one (3), which could be obtained from the condensation of 7-(chloromethyl)-5H-thiazolo[3,2-a]pyrimidin-5-one (1) with 3-cyanopyridine-2-thione (2) via Thorpe-Ziegler isomerization, and aromatic aldehydes under NH₂SO₃H as catalysis in good yields.     

二萘并噻咯的合成及性能

Siloles constitute an important emerging class of photoluminescent materials. A series of compounds consisting of silole cores and fused naphthalene were synthesized and characterized:6, 6-dimethyl-1, 2, 3, 4, 8, 9, 10, 11-octapropyl-6H-dinaphtho[2, 3-b:2', 3'-d]silole, 1, 2, 3, 4, 8, 9, 10, 11-octabutyl-6, 6-dimethyl-6H-dinaphtho[2, 3-b:2', 3'-d]silole, 6, 6-diphenyl-1, 2, 3, 4, 8, 9, 10, 11-octapropyl-6H-dinaphtho[2, 3-b:2', 3'-d]silole, and 1, 2, 3, 4, 8, 9, 10, 11-octabutyl-6, 6-diphenyl-6H-dinaphtho[2, 3-b:2', 3'-d]silole. These dinaphthalene-fused siloles were synthesized from diiodonaphthalene, which was prepared by a direct coupling method. Subsequent reaction in the presence of n-butyllithium yielded 3, 3'-diiodo-2, 2'-binaphthalene. Direct substitution of two chloride ions from Ph₂SiCl₂ or Me₂SiCl₂ with 3, 3'-dilithio-2, 2'-binaphthalene then yielded the multi-substituted silole. Nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry were used to characterize the structures of the siloles. Their optical and electronic properties were investigated using ultraviolet-visible absorption spectroscopy, photoluminescence spectroscopy, cyclic voltammetry, and density functional theory calculations. The dinaphthalene-fused siloles exhibited similar absorption and emission peaks. Their deep highest occupied molecular orbital level at approximately -5.5 eV indicated that they were chemically stable. Differential scanning calorimetry and thermogravimetric analysis indicated that the siloles were stable up to 309℃. A multilayer electroluminescent device was fabricated using 1, 2, 3, 4, 8, 9, 10, 11-octabutyl-6, 6-dimethyl-6H-dinaphtho[2, 3-b:2', 3'-d]silole as a light-emitting layer. The resulting device produced bright blue emission, indicating that these siloles may be suitable materials in organic light-emitting devices.     

A new route to annulated oligothiophenes

[reaction: see text] A new convenient method for the construction of thiophene-annulated thieno[2,3-b]thiophenes has been proposed. The key step of the method is ring closure of 10H-bisthienodithiocin-10-one by strong bases. The syntheses of two previously unknown annulated oligothiophenes, thieno[2,3-b]thieno[3',2':4,5]thieno[3,2-d]thiophene (1a) and thieno[3,2-b]thieno[2',3':4,5]thieno[3,2-d]thiophene (1b), have been described to illustrate the success of the method.     

Synthesis of heterocyclic compounds possessing the 4H-thieno[3,2-b]pyrrole moiety

A series of novel heterocyclic combinatorial libraries containing 4H-thieno[3,2-b]pyrrole, thieno[2',3':4,5]-pyrrol[1,2-d][1,2,4]triazine and thieno[2',3':4,5]pyrrolo[1,2-a]pyrazine heterocyclic moieties were obtained by parallel solution-phase synthesis. Key steps include different reactions of initial alkyl 4H-thieno[3,2-b]-pyrrole-5-carboxylates, such as alkylation with alkylating agents; transformation of the carboxylate group into different reactive functionalities, followed by reactions with electrophilic species; intramolecular cyclizations; and amide bond formation. Simple manual techniques for parallel reactions were coupled with easy purification procedures to give high-purity final products.