A technique for in situ monitoring of crystallization from solution by solid-state 13C CPMAS NMR spectroscopy

We report a technique for carrying out in situ solid-state NMR studies of crystallization from solution, allowing the evolution of different solid state structures (polymorphs) produced during the crystallization process to be identified. The technique exploits selectivity in NMR properties (specifically, the efficiency of cross-polarization from (1)H to (13)C) between molecules in the solid and solution states, such that the first solid particles produced during the crystallization process are observed selectively, without detecting any signal from dissolved solute (or solvent) molecules. The application of the technique is demonstrated to reveal new insights concerning an isotope effect on the polymorphic outcome of crystallization of glycine from water. As revealed by this example, the in situ solid-state NMR approach reported here creates significant new opportunities for probing and understanding details of the evolution of solid state structures produced during crystallization from solution.     

萝芙木根中萝芙木碱的分离纯化

对萝芙木根中萝芙木碱的提纯与检测技术进行研究.利用萝芙木植物的根和皮为原料,对萝芙木碱的分离纯化过程进行了系统的研究,确立了固一液萃取、液一液萃取、等电点沉淀、甲醇重结晶提取萝芙木碱的优化方案,并用高效液相色谱法检测了萝芙木碱的含量.实验所得样品中萝芙木碱的含量不低于98%.结果表明该分离纯化技术生产成本低,操作简单,...     

Analysis of anatoxin-a in biological samples using liquid chromatography with fluorescence detection after solid phase extraction and solid phase microextraction

Anatoxin-a is a naturally occurring, potent neurotoxin produced by some species of cyanobacteria in freshwaters. This toxin, which is a potential health hazard, especially to animals, has been determined in different biological matrices such as several cyanobacterial cultures and water samples and carps and mussels tissue using a sensitive High Performance Liquid Chromatography with Fluorescence detection method. Sonication was the technique selected for the extraction of intracellular anatoxin-a and solid phase extraction using weak cation exchange was used for the concentration and purification of the samples. 4-Fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) was used to convert anatoxin into a highly fluorescent derivative. Recovery experiments were performed for each type of matrix used in this work, and adequate values were obtained (71-87%). Limits of detection for anatoxin-a were estimated to be in the ng/L and ng/g level for water and cyanobacterial samples, respectively. The results obtained were also compared with those obtained after using solid phase microextraction, as an alternative for the extraction and purification of the samples. Advantages and disadvantages regarding to the efficiency for impurities removal, simplicity and rapidity and the potential for concentration enhancement of using both methodologies have been also discussed.     

Anatase-TiO2 nanomaterials: analysis of key parameters controlling crystallization

Nanoparticulated TiO2 materials with anatase structure were synthesized by using a microemulsion method. The structural characteristics of the amorphous solid precursors and their evolution during thermal treatments were studied by using X-ray absorption structure (X-ray absorption near edge structure XANES and extended X-ray absorption fine structure EXAFS), XRD-PDF (X-ray diffraction-pair distribution function), and infrared spectroscopy. Concerning the precursor materials, XANES and EXAFS showed a local order closely related to that of the anatase structure but containing defective, undercoordinated Ti5c4+ species in addition to normal Ti6c4+ species. The PDF technique detects differences among samples in the local order (below 1 nm) and showed that primary particle size varies throughout the amorphous precursor series. The physical interpretation of results concerning the amorphous materials and their evolution under thermal treatment gives conclusive evidence that local, intraparticle ordering variations determine the temperature for the onset of the nucleation process and drive the solid behavior through the whole crystallization process. The significance of this result in the context of current crystallization theories of oxide-based nanocrystalline solids is discussed.     

气相扩散法生长溶菌酶晶体的动态光散射研究

首次采用动态光散射研究了气相扩散法生长溶菌酶晶体.实验中采用了两种溶解溶菌酶的方法,所得实验结果是有区别的.这种区别表明了NaCl对溶菌酶分子间相互作用产生十分重要的影响.实验结果表明,晶体生长过程中,溶液中溶菌酶始终保持单分子与两分子聚集体的状态,这种状态是生长晶体的基础.     

Characterization of La0.8Sr0.2MnO3 Produced by a Reactive DC Thermal Plasma Spray System

An atmospheric pressure, reactive DC plasma spray system was used to evaluate a process for depositing porous, complex oxide thin films. A mixture of La₃O₃, SrCO₃, and MnCo₃ was used to produce a porous cathode layer for potential application in planar solid oxide fuel cells. The coated lanthanum strontium manganite (LSMO) layer made from the mixture was compared to ones generated using a pre-reacted LMSO powder made by solid-state reaction. The results showed that the crystallization of the reactive-spray formed coating layer on the zirconia substrate was higher than that of the coating layer on the mild steel from the pre-reacted LMSO powder. It is both a simpler process and gave better crystallization. The controlled porous coating layers with open pore size of less than 1 m were successfully produced in a reactive DC plasma spray system from the mixture of raw materials.     

Identification and characterization of an anomalous racemate

Direct crystallization is a convenient and generally efficient method to increase the optical purity of partially resolved enantiomers. The design of chiral purification processes based on crystallization requires measurement of solubility of all stable phases, i.e. enantiomers and racemic mixtures, in the process solvent. Enantiomeric systems have been classified by the nature of the solid phases formed as racemic compounds, conglomerates or solid solutions. In rare cases, however, enantiomers form crystalline addition compounds with a stoichiometry other than 1(S):1(R). These structures are generally known as “anomalous racemates”. The solubility and melting point diagrams of each type of enantiomeric system exhibit characteristic features which have significant implications on the efficiency of the crystallization to enhance optical purity. In this study, we report the formation of a non-equimolar 3:1 addition compound in the R/S 3-hydroxy-4-(2,4,5-trifluorophenyl) butanoic acid.     

Inhibiting surface crystallization of amorphous indomethacin by nanocoating

An amorphous solid (glass) may crystallize faster at the surface than through the bulk, making surface crystallization a mechanism of failure for amorphous pharmaceuticals and other materials. An ultrathin coating of gold or polyelectrolytes inhibited the surface crystallization of amorphous indomethacin (IMC), an anti-inflammatory drug and model organic glass. The gold coating (10 nm) was deposited by sputtering, and the polyelectrolyte coating (3-20 nm) was deposited by an electrostatic layer-by-layer assembly of cationic poly(dimethyldiallyl ammonium chloride) (PDDA) and anionic sodium poly(styrenesulfonate) (PSS) in aqueous solution. The coating also inhibited the growth of existing crystals. The inhibition was strong even with one layer of PDDA. The polyelectrolyte coating still permitted fast dissolution of amorphous IMC and improved its wetting and flow. The finding supports the view that the surface crystallization of amorphous IMC is enabled by the mobility of a thin layer of surface molecules, and this mobility can be suppressed by a coating of only a few nanometers. This technique may be used to stabilize amorphous drugs prone to surface crystallization, with the aqueous coating process especially suitable for drugs of low aqueous solubility.     

Distribution of Impurities During Low-Temperature Directed Crystallization of Water Solutions

Trends in the distribution of impurities at low-temperature directed crystallization of water solutions of various concentrations are described and the mechanism of their incorporation in the solid phase is explained. The data on the distribution coefficients of the impurities between the solid and liquid phases are presented. It is shown that the behavior of the impurities in the process of directed crystallization is the same and does not depend on the nature of the macrocomponent. The unique case of CsI is explained due to the negative values of hydration of iodide and cesium ions. It is recommended to use the observed trends for the purification of water or analytical pre-concentration of impurities.The coefficients of enrichment of the impurities after low-temperature directed crystallization of aqueous solutions with different composition and total concentration of the dissolved salts are estimated and their dependencies on the composition and concentration of the aqueous solution are shown.     

Sonocrystallization of polycarbonate melts

In this paper, we showed the simplified continuous process to crystallize the polycarbonate (PC) melts using sonocrystallization which is based on ultrasonic cavitation and ‘hot spot’ theory. High power ultrasonic wave was introduced to crystallize the PC prepolymers which is generally used for solid‐state polymerization (SSP) to obtain the ultra‐high molecular weight PCs. The structure and properties of PC treated with ultrasonic wave such as torque changes and crystallinities were studied. The experimental results showed that ultrasonic wave could improve the crystallinities of PCs and sonication time was proportional to their crystallinity. This is attributed to the decrease of the specific volume and the resulting shrinkage is compensated by a flux of a polymer melt toward the crystallization front. Torque data were collected directly from the Haake internal mixer and crystallinities were evaluated from differential scanning calorimeter (DSC). This process is an environmentally benign process so that no additional solvents or treatments are needed and will be very useful in the conventional solid‐state process which is used industrially. Copyright © 2007 John Wiley & Sons, Ltd.     

Evaluation of protein-A chromatography media

In process-scale antibody purification, protein-A affinity chromatography is commonly used as the initial purification step. In this paper, two different protein-A media were evaluated. These adsorbents have a porous glass backbone with different pore sizes: 700 A and 1000 A. Adsorption equilibrium data of human immunoglobulins on these media were measured via a batch technique and correlated using the Langmuir isotherm model. A larger static capacity was found for the smaller pore size material, which is probably a result of the larger specific surface area and associated higher ligand concentration. The protein uptake kinetics were also obtained via a stirred tank experiment using different initial protein concentrations. A surface layer model was used to represent the protein uptake by the media and to estimate values of a concentration-independent effective diffusivity within the particle. Experimental breakthrough curves were also obtained from packed beds operated under different conditions. Calculated breakthrough profiles were found to be in good agreement with the experimental results. Experimental breakthrough data were used to determine the dependence of the dynamic capacity of the media as a function of the fluid residence time. A larger dynamic capacity was also found for the smaller pore size media. The permeability of large scale packed beds was also reported and used in conjunction with the dynamic capacity to calculate the process production rate.     

结晶动力学策略在非富勒烯体系太阳能电池形貌调控领域的应用

非富勒烯体系太阳能电池具有吸收范围宽、半透明及可大面积溶液加工等优势,已在清洁能源领域占据重要地位。在高性能材料开发、活性层形貌及器件工艺优化的推动下,器件能量转换效率已经突破19%。非富勒烯体系太阳能电池的基本结构包括阴极、阳极、相应的界面层及活性层,其中活性层形貌对器件性能有着重要影响。然而,由于活性层中给体与受体分子均为半晶性分子,在成膜过程中两者结晶存在竞争耦合;此外,活性层的结晶和相分离往往同时发生,导致形貌可控性差。针对上述问题,本专论系统总结了通过控制共混体系结晶动力学,精细调控活性层形貌的相关进展,详细介绍了共混体系中分子扩散速率、成核与晶粒生长相对速率、结晶顺序等动力学行为对活性层相分离结构、相区尺寸、结晶度及分子取向等的影响,建立了活性层多层次结构与器件光物理过程间的构效关系,为制备高性能有机太阳能电池器件奠定了基础。     

Self-assembly of heteroleptic [Cu(dipyrrinato)(hfacac)] complexes directed by fluorine-fluorine interactions

Heteroleptic copper(II) complexes were synthesized from three different meso-substituted pyridyl- and quinoline-dipyrrinato ligands (3-pyrdpm, 3-quindpm, and 4-quindpm). Metal complexes were prepared with both acetylacetonate (acac) and hexafluoroacetylactonate (hfacac) ancillary ligands. The complexes undergo a self-complementary self-assembly process upon crystallization to generate a range of solid-state topologies including one-dimensional coordination polymers and discrete hexameric rings. The self-assembly of these molecular aggregates is driven by metal-ligand bonding, but is also modulated by fluorine-fluorine interactions. Perfluorination of the spectator ligand tends to generate more compact structures, which is attributed to aggregation of the perfluoromethyl groups. The results presented here demonstrate that fluorine-fluorine contacts can be used to modulate supramolecular structures in the solid state.     

固相缩聚PET等温结晶动力学

高聚物等温结晶动力学方面的研究者甚多,由熔融缩聚制备的不同分子量PET的等温结晶动力学及几种不同缩聚催化体系固相缩聚PET的等温结晶动力学已有报道.本文采用一个修正的Avrami方程对固相缩聚PET样品进行系统的等温结晶动力学研究.     

用于提取外周血DNA微流控样品预处理芯片的研制

基于固相萃取原理和微电子机械系统(Micro-Electro-Mechanical System, MEMS)技术研制了一种多孔氧化硅微流控样品预处理芯片, 并利用具有大比表面积的多孔氧化硅作为提取DNA的固相载体, 从而大大提高了DNA的提取产率. 分析了影响DNA提取产率的因素, 改进了芯片制备工艺和DNA提取实验方案, 成功地提取了小鼠外周血DNA, 提取产率为24 ng/(μL全血), 达到商用试剂盒水平. 同时以该DNA作为PCR扩增模板, 扩增效果良好.     

Influence of Molecular Interaction on Crystallization Behavior of Glycine from Mother Liquor

The mother liquor for preparing industrial HCN was investigated, to analyze the side-products’ structure and influence of molecular interactions of side-products with glycine and solvent on the glycine’s crystallization process. The side-products(SPs) were super-branched oligmers with plenty of hydrophilic groups, which could affect the crystallization process by interactions such as hydrogen bond. Alcohol-water mixed solvent with different polyols could be used to weaken the SPs-glycine interaction and strengthen the SPs-water interaction, which help to improve the crystallization efficiency and purity. After optimization, SPs’ mass fraction in glycine could be reduced by 80% and the morphology of crystal particles could also be improved.     

过程分析技术在结晶过程中的应用研究进展

结晶是一种传统的分离与纯化技术,目前在高纯度化合物的分离纯化过程中发挥着至关重要的作用,广泛应用于化工、制药等领域。基于质量源于设计理念的过程分析技术为结晶过程的监测、反馈及其控制提供了高效且可靠的支持。该文对衰减全反射傅里叶变换红外光谱技术、拉曼光谱技术、近红外光谱技术、聚光束反射测量技术等多种过程分析技术在结晶过程中的应用进行综述,系统总结上述技术的现状、优缺点,并对未来发展趋势进行展望,以期为结晶工艺的在线监控提供有效参考。     

Crystallization monitoring in supersaturated solution with a quartz crystal sensor

The degree of supersaturation is an important measure for the operation of crystallization processes, because it is directly related to the control of crystal size distribution and shape. A conventional technique utilizing solution composition and temperature has a variety of problems caused from the measurement error and the handling of analyzing samples.A monitoring system of the supersaturation using a quartz crystal sensor is proposed here, and its performance is examined applying different manipulations of coolant temperature. The experimental outcome and photographic examination indicate that the measurements of resonant frequency and resistance of the sensor can be used for the prediction of the formation and growth of solid crystal from the crystallization process. The monitoring system eliminates the intrinsic error source of the conventional system to give the improved measurement and on-line application availability.     

The structure and crystallization of thin water films on Pt(111)

When water is adsorbed on Pt(111) above 135 K several different ice structures crystallize, depending on the thickness of the ice layer. At low coverage water forms extended islands of ice with a (square root(37) x square root(37))R25(o) unit cell, which compresses as the monolayer saturates to form a (square root(39) x square root(39))R16(o) structure. The square root(39) low-energy electron diffraction (LEED) pattern becomes more intense as the second layer grows, remaining bright for films up of 10-15 layers and then fading and disappearing for films more than ca. 40 layers thick. The ice multilayer consists of an ordered square root(39) wetting layer, on which ice grows as a crystalline film which progressively loses its registry to the wetting layer. Ice films more than ca. 50 layers thick develop a hexagonal LEED pattern, the entire film and wetting layer reorienting to form an incommensurate bulk ice. These changes are reflected in the vibrational spectra which show changes in line shape and intensity associated with the different ice structures. Thin amorphous solid water films crystallize to form the same phases observed during growth, implying that these structures are thermodynamically stable and not kinetic phases formed during growth. The change from a square root(39) registry to incommensurate bulk ice at ca. 50 layers is associated with a change in crystallization kinetics from nucleation at the Pt(111) interface in thin films to nucleation of incommensurate bulk ice in amorphous solid water films more than 50 layers thick.     

In Situ Microscopic Observation of the Crystallization Process of Molecular Microparticles by Fluorescence Switching

To clearly understand the solid‐state amorphous‐to‐crystalline transformation is a long‐standing challenge because such crystallization occuring in confined environments is difficult to observe directly. We developed an in situ and real‐time imaging procedure to record the interface evolution in a solid‐state crystallization of molecular amorphous particles. The method, by employing a tetra‐substituted ethene with novel morphology‐dependent fluorescence, which can distinguish the interfaces between the crystalline and amorphous phase by fluorescence color, is a simple and practical method to probe the inner process of a molecular microparticle. The crystallization of amorphous microparticles in different cases was clearly recorded, where the perfect microparticles and those with defects demonstrate diverse destinies. The details disclosed in this observation will deepen the understanding for a series of solid‐state crystallization that we know little about before.