[SiNi(H2O)W11O39]6-多层组装膜修饰电极及其电化学行为

采用电化学生长法制备包含杂多酸[SiNi(H2O)W11O39]6-(SiNiW11)和聚合物阳离子PDDA的多层膜修饰电极, 利用循环伏安法研究其电化学行为、 pH的影响及其对BrO3-和NO2-体系还原的电催化性能;并对多层膜电化学过程机理进行了初步探讨. 结果表明: 多层膜的增长均匀, 峰电流随层数的增加而增加;多层膜的峰电流随扫速的增加而增加;还原峰的峰电位随pH的增加而负移.     

[SiMn(H2O)W11O39]6-在玻碳电极上的多层组装膜修饰电极及电化学行为

采用电化学生长法制备包含杂多酸[SiMn(H2O)W11O39]6-(SiMnW11)和聚合物阳离子PDDA的多层膜修饰电极,利用循环伏安法研究其电化学行为、扫描速率的影响及其对BrO3-和NO2-体系还原的电催化性能.结果表明:SiMnW11多层膜增长均匀,峰电流随层数的增加而增加;多层膜的峰电流随扫速的增加而增加;SiMnW11修饰电极对BrO2-和NO2-的还原具有良好的电催化作用.在最佳的实验条件下,BrO3-的还原峰电流与其浓度在0.345～5.28 mmol·L-1范围内呈良好的线性关系,相关系数r=0.998,检出限8.8×10-5mol·L-1.     

锰取代Keggin型杂多酸[ZnW11O39Mn(H2O)]8-在化学修饰玻碳电极上的多层组装及电催化性能研究

在4-氨基苯甲酸修饰的玻碳电极上制备了过渡金属取代杂多酸[ZnW₁₁O₃₉Mn(H₂O)]^8-(ZnW₁₁Mn)多层膜.各层的循环伏安行为证明膜的增长均匀,峰电流随层数的增加而增加.与其在溶液中的氧化还原行为相比,多层膜中的ZnW₁₁Mn显示出一些特殊的性质.还讨论了pH对其氧化还原行为的影响.该多层膜对BrO₃^-和H₂O₂的还原及抗坏血酸的氧化具有较好的电催化性能.     

双-Keggin型四元杂多化合物[Nd(SiMo7W4O39)2]13-多层膜在化学修饰玻碳电极上的组装及电催化

报道双-Keggin型四元杂多化合物K10H3[Nd(SiMo7W4O39)2]XH2O(简称[Nd(SiMo7W4)2]^13-）聚合物的交替组装多层膜在4-氨基苯甲酸修饰玻碳电极上的制备及其电化学特性。各层的循环伏安行为证明膜的均匀增长，峰电流随层数的增加而增加，与溶液中的电化学行为相比，位于多层膜中的杂多化合物的氧化还原特征峰随着多层膜层数的增加，具有一定程度的形变。该电极具有较高的稳定性。并讨论了pH对其氧化还原行为的影响，考察了该多层膜修饰电极对BrO3^-、HNO2和H2O2等的电催化性能。     

铁氰酸镍膜修饰金电极的研制及应用

通过层层组装的方法,将Ni^2＋和[Fe（CN）6]^3-交替沉积在巯基乙酸功能化的金电极表面．首次成功制备了铁氰酸镍多层膜修饰电极,用循环伏安法研究了该多层膜的电化学行为,实验表明峰电流随膜层数的增加而增加,膜均匀增长．该修饰电极对一价金属离子Na^＋,K^＋,NH4^＋具有选择性响应,尤其对K^＋存在准能斯特响应,响应范围0．01～1．0mol／L;而且该电极对抗坏血酸（AA）和S2O3^2-体系的氧化具有良好的电催化作用,线性范围分别为：1．14×10^-4～1．14×10^-3mol／L和5．0×10^-4～3．1×10^-3mol／L．     

锗钨酸盐的电化学性能及GeW11Co/P-oPD/GC电极对过氧化氢的电催化还原

研究了杂多酸-钴取代三聚Keggin结构锗钨酸盐（[Co（H2O）3（α-GeW11CoO38）3]10-）的电化学性能.实验表明,在玻碳（GC）电极上,锗钨酸盐循环伏安曲线呈现2对可逆的氧化还原峰,峰电位差分别为31 mV和35 mV,各对应于2电子4质子和2电子3质子电极反应,其过程受表面吸附控制.经过电聚合将Ge...     

杂多酸—聚（二烯丙基二甲基氯化铵）多层膜在4—氨基硫酚修饰金电极上的组装

通过电化学生长法在４－氨基硫酚自组装膜修饰金电极上制备了包含杂多酸（ＳｉＭｏ１１ＶＯ＾５－４０和聚合物阳极离子ＰＤＤＡ的多层膜修饰电极。用循环伏安法研究了该多层膜的电化学行为,结果表明,Ｍｏ的第３个还原峰随多层膜层数的增加显著增长,而另两个还原峰增长缓慢。该修饰电极的峰电位随ＰＨ的增加而线性负移,表明有氢离子参与杂多酸的氧化还原反应。该修饰电极对ＢｒＯ＾－３和ＮＨＯ２的还原反应有良好的催化作用,催化电流随着层数的增加而增长,并且Ｍｏ的第三个还原峰电流与ＣＲｒＯ＾－３有良好的线性关系。     

基于聚硫堇和层层组装碳纳米管/HRP的过氧化氢传感器研究

将电聚合和层层组装方法有效结合构筑了聚硫堇（PTH）电子介体修饰的碳纳米管（CNTs）/辣根过氧化物酶（HRP）多层膜无试剂H2O2传感器.利用电化学阻抗谱对CNTs/HRP多层膜的组装过程进行监测,用循环伏安法和计时电流法研究了该HRP电极的电化学行为.探讨了酶组装层数、工作电位、pH值和碳纳米管对电极响应的影响.该...     

普鲁士蓝膜修饰极循环伏安行为的研究

本文研究普鲁士蓝（PB）膜修饰电极的循环伏安行为，结果表明，膜中电活性中心间的相经作用导致PB膜电极的伏安行为偏离理想表面波，用有限扩散边模型解释了高电位扫速下膜电极的伏安行为，在含钾离子的电解质溶液中测得PB膜中电荷传输扩散系数为10^-9-10^-11cm^2/s。     

[PCu(H2O)Mo11O39]5－/PAMAM多层复合膜的制备及电化学性质研究

通过电化学扫描法在玻碳电极和导电玻璃基底上组装制备过渡金属铜取代多金属氧酸盐[PCu(H₂O)Mo₁₁O₃₉]^5－和4代聚酰胺-胺(G4-PAMAM)交替沉积的复合膜. X射线光电子能谱(XPS), 原子力显微镜(AFM), 循环伏安法(CV)结果表明复合膜成功制备且有好的均匀性. 多层膜中的[PCu(H₂O)Mo₁₁O₃₉]^5－与其在溶液中的氧化还原行为相比, 电子转移控制速率不同, 该多层膜修饰电极稳定性好, 对 的还原及抗坏血酸的氧化具有较好的电催化性能.     

[SiCu(H2O)W11O39]6-在玻碳电极上的多层组装及电催化性能

The electrochemical behavior of SiCu W11 heteropolyacide in acidic aqueous solution was studied. The effect of solution pH on the electrochemical behavior of SiCu W11 was discussed and the mechanism was suggested. New electrode was modified by muhilayer films composed of heteropolyanion (SiCu W11 and cationic polymer poly (diallyldimethylammonium chloride). Cyclic vohammetry showed the uniform growth of the film. The modified electrodes exhibited some special electrochemical properties in the films, different from those in homogeneous aqueous solutions. The effect of pH on the redox behavior of SiCu W11 in the films was discussed in details. The muhilayer film electrodes have an excellent electrocatalytic response to the reduction of BrO3^- and NO2^-.     

Layer-by-layer assembly of silicotungstate multilayer films modified on glassy carbon electrode and their electrochemical behaviors

A new electrode was modified by multilayer films composed of heteropolyanion (SiW12) and cationic polymer poly(diallyldimethylammonium chloride) through electrochemical growth. The modified electrode electrochemical behavior, the effect of solution pH and electrocatalytic response to the reduction of BrO3- and NO2- have been investigated. The result shows that the electrochemical process of multilayer films modified electrode including SiW12 is a reversible process by electrochemical step. One-electron process has no proton participation in the first step, and one-electron process is accompanied by one proton participation in the second step and two-electron process is accompanied by two protons participation in the third step. The films grow uniformly, and the peak currents increase with increasing layer numbers. The peak currents increase with scan rate, and the reduced potentials of multilayer films shift negatively with increasing pH. The electrochemical mechanism of multilayer films was suggested.     

Assembly and Electrochemical Study of Transition Metal Substituted Polyoxometalates SiW11 NiO39^6- and SiW11 MnO39^6- on 4-Aminothiophenol Modified Glassy Carbon Electrode

Via layer-by-layer assembly, the polyoxometalates of Keggin type, SiW11 O39 Ni(H2O)^6- (SiNiW11) and SiW11 O39Mn( H2O)^6-( SiMnW11 ) were first immobilized on a 4-aminothiophenol (4-ATP) modified glassy carbon electrode surface. The electrochemical behavior of these polyoxometalates was investigated. They exhibited some special properties in the films, which are different from those in a homogeneous aqueous solution. Their reaction mechanism in a multilayer film is proposed. The electrocatalytic behavior of these muhilayer film electrodes for the reduction of BrO3^- and NO2^- were comparatively studied.     

Assembly and Electrochemical Study of Transition Metal Substituted Polyoxometalates SiW11NiO6-39 and SiW11MnO6-39 on 4-Aminothiophenol Modified Glassy Carbon Electrode

Via layer-by-layer assembly, the polyoxometalates of Keggin type, SiW11O39Ni(H2O)6-(SiNiW11) and SiW11O39Mn(H2O)6-(SiMnW11) were first immobilized on a 4-aminothiophenol(4-ATP) modified glassy carbon electrode surface. The electrochemical behavior of these polyoxometalates was investigated. They exhibited some special properties in the films, which are different from those in a homogeneous aqueous solution. Their reaction mechanism in a multilayer film is proposed. The electrocatalytic behavior of these multilayer film electrodes for the reduction of BrO-3 and NO-2 were comparatively studied.     

锇-聚乙烯吡啶复合物与辣根过氧化物酶分子多层膜的制备及电化学性质研究

基于分子间静电相互作用力,将锇-聚乙烯吡啶复合物(PVP-Os)与辣根过氧化物酶(HRP)交替沉积于固体基质表面,制得了包含生物成分的分子多层膜.膜层间的聚合物分子起到了粘接与导电的双重作用.用紫外-可见光谱法跟踪了石英基片上的组装过程,研究了多层膜电极对过氧化氢的电催化还原性能,并描述了多层膜电化学行为.     

Copper hexacyanoferrate multilayer films on glassy carbon electrode modified with 4-aminobenzoic acid in aqueous solution

4-Aminobenzoic acid (4-ABA) was covalently grafted on a glassy carbon electrode (GCE) by amine cation radical formation during the electrooxidation process in 0.1 M KCl aqueous solution. X-ray photoelectron spectroscopy (XPS) measurement proves the presence of 4-carboxylphenylamine on the GCE. Electron transfer processes of Fe(CN)₆³⁻ in solutions of various pHs at the modified electrode are studied by both cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Changing the solution pH would result in the variation of the terminal group's charge state, based on which the surface pK_a values were estimated. The copper hexacyanoferrate (CuHCF) multilayer films were formed on 4-ABA/GCE prepared in aqueous solution, and which exhibit good electrochemical behavior with high stability.     

钒取代多金属氧酸盐/聚酰胺-胺多层膜的制备及其电催化性能

用层接层自组装的方法制备了过渡金属钒取代的多金属氧酸盐PMo11VO4-40/聚酰胺-胺多层纳米复合膜. X射线光电子能谱(XPS)、紫外-可见光谱(UV-Vis)、循环伏安(CV)测定和分析结果表明, PMo11VO4-40和聚酰胺-胺通过静电相互作用形成了纳米交替多层膜,且膜的增长均匀. 复合膜的循环伏安图呈现出四对氧化还原峰(一个V的单电子和三个Mo的双电子), 峰电流与扫描速率成正比, 其式量电位随着pH 的增加而线性负移, 表明电极过程属于表面控制过程, 电荷传递很快且有氢离子参与多金属氧酸盐的氧化还原反应. 该方法制备的多层膜修饰电极稳定性好, 对NO-2、BrO-3及H2O2具有良好的催化还原活性.     

PANI-SnP复合膜电极在镍镉废水中电控离子交换性能

采用滴涂法在铂基底制备了电活性聚苯胺-磷酸锡(PANI-SnP)复合膜电极,考察了该电极在Ni²⁺、Cd²⁺溶液的电控离子交换性能. 用傅立叶变换红外光谱和扫描电镜分析观察复合膜的组成及表面形貌;在0.1 mol·L^-1 Ni(NO₃)₂、Cd(NO₃)₂溶液,通过循环伏安法比较了PANI膜、SnP膜及PANI-SnP复合膜电极的电化学性能,并结合电化学石英晶体微天平技术重点考察了PANI-SnP复合膜的离子交换机制;同时,通过循环伏安法调控复合膜电极的氧化还原电位,结合X射线能谱和X射线光电子能谱分别测定了其氧化和还原状态的元素组成. 结果表明,PANI-SnP复合膜电极在Ni²⁺、Cd²⁺溶液均有良好的氧化还原电活性和可逆离子交换性能,其Cd²⁺离子选择性优于Ni²⁺离子,通过电控离子交换可使Cd²⁺离子从镍镉废水高效分离.