Vinyl‐terminated side‐chain liquid‐crystalline polyethers containing mesogenic benzylideneaniline moieties

The synthesis of two vinyl‐terminated side‐chain liquid‐crystalline polyethers containing benzylideneaniline moieties as mesogenic cores was approached in two different ways: by chemically modifying poly(epichlorohydrin) with suitable mesogenic acids or by polymerizing analogous glycidyl ester or glycidyl ether derivatives. In all the conditions tested, the first approach led to materials in which the imine group was hydrolyzed. The second approach led to the desired polymers PG2a and PG2b , but only from the glycidyl ether derivatives and when the initiator was the system that combined polyiminophosphazene base t‐Bu‐P₄ and 3,5‐di‐t‐butylphenol. These polymers were chemically characterized by IR and ¹H and ¹³C NMR spectroscopies. The estimated degrees of polymerization ranged from 30 to 36. The liquid crystalline behavior of the synthesized polymers was studied by differential scanning calorimetry, polarized optical microscopy (POM) and X‐ray diffraction. Both polymers behave like liquid crystals and exhibited a single mesophase, which was recognized as a smectic C mesophase, probably with a bilayer arrangement, i.e., a smectic C₂ mesophase. The crosslinking of both polymers was performed with dicumyl peroxide as initiator, which led to liquid crystalline thermosets. POM and X‐ray diffraction confirmed that the mesophase organization mantained on the crosslinked materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1877–1889, 2006     

Effect of lateral substituents on the mesomorphic properties of side-chain liquid crystalline polysiloxanes containing 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate side groups

The synthesis of side-chain liquid crystalline polysiloxanes containing either 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate or laterally fluoro-, chloro-, bromo-, and methoxy-substituted 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate mesogenic side groups is presented. The mesomorphic properties of the synthesized polymers have been characterized by optical polarizing microscopy, differential scanning calorimetry, and X-ray diffraction measurements. The effects of spacer length and lateral substituent on the mesomorphic properties of the obtained polymers are examined. The five polymers which contain three methylene units in the spacers show no mesophase, while the five polymers which contain eleven methylene units in the spacer display smectic mesomorphism. Among the other fifteen polymers which contain respectively four, five, or six methylene units in the spacers, those with small fluoro and chloro substituents reveal respectively an S_A phase, while those with bulky bromo and methoxy substituents show no liquid crystalline behavior. The experimental results demonstrate that introducing a bulky lateral substituent into the mesogenic core of a polymer depresses the tendency to form a mesophase. Furthermore, the technique of thermally stimulated current has been used to study the dipolar relaxation mechanisms in a side-chain liquid crystalline polysiloxane. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2793–2800, 1997     

Synthesis and characterization of side-chain liquid crystal polyurethanes

A series of liquid crystal α-[bis(2-hydroxyethyl)amino]-ω-(4-nitroazobenzene-4′-oxy)alkanes (Cn-diol) with different alkyl chain length has been synthesized. All Cn-diols exhibit a smectic phase that has been identified by means of polarizing microscopy and differential scanning calorimetry. These compounds are suitable monomers for the synthesis of side-chain liquid crystalline polyurethanes and polyesters. They were polymerized with hexamethylene diisocyanate to corresponding SCLC polyurethanes in which the spacer length was varied from 2 to 12 methylene units. Polyurethanes (CnP) with spacer lengths n ≥ 4 exhibited liquid crystalline behavior. Fourier transform infrared temperature studies of the CnP were done focusing on H-bonds between the N H and CO groups of the urethane backbone. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2871–2888, 1997     

Synthesis and optoelectronic properties of liquid‐crystalline copolymers based on fluorene and triphenylamine‐containing oligo(p‐phenylenevinylene) derivatives for white light emission

A series of novel liquid‐crystalline copolymers based on fluorene and triphenylamine‐containing oligo(p‐phenylenevinylene) derivatives have been synthesized according to the Suzuki polymerization method. The structures, optical and electrochemical properties of the copolymers were characterized by ¹H NMR, ¹³C NMR, GPC, UV–vis, photoluminescence (PL) spectroscopy, and cyclic voltammetry (CV), respectively. The thermotropic phase behavior of the copolymers was investigated by using differential scanning calorimetry (DSC) and polarized optical microscope (POM). All of the copolymers exhibit thermally liquid crystalline properties and represent the characteristic Schlieren textures in a wide temperature range. The effects of the concentrations and chain length of the oligo(phenylenevinylene) units on the thermal properties, liquid crystalline, photo‐ and electroluminescent properties of the copolymers have been investigated in details. Among the copolymers‐based devices with a configuration of ITO/PEDOT:PSS/polymers/Ca/Al, the device based on PF‐LOPV05 exhibits the lowest turn‐on voltage of 3 V and the maximum brightness of 210 cd/m² at 8.3 V. A single layer device based on the blend of PF/PF‐LOPV05 emits white electroluminescence with CIE coordinates of (0.30, 0.35) at 8 V. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3296–3308, 2009     

Ordered nanostructures at two different length scales mediated by temperature: A triphenylene‐containing mesogen‐jacketed liquid crystalline polymer with a long spacer

A mesogen‐jacketed liquid crystalline polymer (MJLCP) containing triphenylene (Tp) moieties in the side chains with 12 methylene units as spacers (denoted as PP12V) was synthesized. Its liquid crystalline (LC) phase behavior was studied with a combination of solution ¹H NMR, solid‐state NMR, gel permeation chromatography, thermogravimetric analysis, polarized light microscopy, differential scanning calorimetry, and one‐ and two‐dimensional wide‐angle X‐ray diffraction. By simply varying the temperature, two ordered nanostructures at sub‐10‐nm length scales originating from two LC building blocks were obtained in one polymer. The low‐temperature phase of the polymer is a hexagonal columnar phase (Φ_H, a = 2.06 nm) self‐organized by Tp discotic mesogens. The high‐temperature phase is a nematic columnar phase with a larger dimension (a′ = 4.07 nm) developed by the rod‐like supramolecular mesogen—the MJLCP chain as a whole. A re‐entrant isotropic phase is found in the medium temperature range. Partially homeotropic alignment of the polymer can be achieved when treated with an electric field, with the polymer in the Φ_H phase developed by the Tp moieties. The incorporation of Tp moieties through relatively long spacers (12 methylene units) disrupts the ordered packing of the MJLCP at low temperatures, which is the first case for main‐chain/side‐chain combined LC polymers with MJLCPs as the main‐chain LC building block to the best of our knowledge. The relationship of the molecular structure and the novel phase behavior of PP12V has implications in the design of LC polymers containing nanobuilding blocks toward constructing ordered nanostructures at different length scales. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 295–304     

Poly(propylene isophthalate), poly(propylene succinate), and their random copolymers: Synthesis and thermal properties

Poly(propylene isophthalate) (PPI), poly(propylene succinate) (PPS), and poly(propylene isophthalate/succinate) (PPI‐PPS) random copolymers were synthesized and characterized in terms of chemical structure and molecular weight. The thermal behavior was examined by TGA and DSC. All the polymers showed a good thermal stability. At room temperature, they appeared as semicrystalline materials, except 20PPI‐PPS and 30PPI‐PPS: the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of T_m with respect to homopolymers. A crystalline phase of PPI and PPS was evidenced at high content of PI or PS units, respectively. Amorphous samples were obtained after melt quenching and an increment of T_g, with the increment of PI units, was observed. This behavior was explained as due to the presence of stiff phenylene groups. The Wood equation described well T_g‐composition data. Lastly, the presence of a rigid‐amorphous phase was evidenced in copolymers, differently from the two homopolymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 310–321, 2007.     

Synthesis and characterization of new segmented polyurethanes with side‐chain,liquid‐crystalline chain extenders

Liquid‐crystalline, segmented polyurethanes with methoxy–biphenyl mesogens pendant on the chain extender were synthesized by the conventional prepolymer technique and esterification reaction. Two, side‐chain, liquid‐crystalline (SCLC) polyurethanes with mesogens having spacers of six and eight methylene units were prepared. The structures of the mesogenic units and SCLC polyurethanes were confirmed by Fourier transform infrared spectroscopy and ¹H NMR. Polymer properties were also examined by solubility tests, water uptakes, and inherent viscosity measurements. Differential scanning calorimetry studies indicated that the transition temperature of the isotropic to the liquid‐crystalline phase decreased with increasing spacer length. Wide‐angle X‐ray diffraction (WAXD) studies revealed the existence of liquid‐crystalline phases for both SCLC polyurethanes. Polarized optical microscopic investigations further confirmed the thermotropic liquid‐crystalline behaviors and nematic mesophases of both samples. Thermogravimetric analysis displayed better thermal stabilities for both SCLC polymers and indicated that the presence of mesogenic side chains may increase the thermal stability of segmented polyurethanes. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 290–302, 2004     

Cocrystallization phenomena in novel poly(diethylene terephthalate‐co‐thiodiethylene terephthalate) copolyesters

Poly(diethylene terephthalate‐co‐thiodiethylene terephthalate) (PDET/TDET) copolymers of various compositions were synthesized and characterized in terms of chemical structure and molecular weight. The thermal behavior was examined by thermogravimetric analysis and differential scanning calorimetry. All the polymers showed a good thermal stability. At room temperature they appeared as semicrystalline materials: the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of melting temperature with respect to homopolymers. WAXD measurements indicated that cocrystallization occurs over an extended composition range and three different crystalline phases have been identified. In particular, the applicability of Wendling–Suter's equation has been checked for the PDET/TDET copolymers with TDET unit content ranging from 60 to 90 mol %. Amorphous samples were obtained after melt quenching and a decrease of T_g as the content of TDET units is increased was observed. This behavior was explained as due to the presence of flexible C? S? C bonds in the polymeric chain. Lastly, the Fox equation well described T_g‐composition data. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1562–1571, 2006     

Tailoring the liquid crystalline property via controlling the generation of dendronized polymers containing azobenzene mesogen

The first‐ and second‐generation dendronized polymers containing azobenzene mesogen were designed and successfully synthesized via free radical polymerization. The chemical structures of the monomers were confirmed by elemental analysis, ¹H NMR, and ¹³C NMR. The molecular characterizations of the polymers were performed with ¹H NMR and gel permeation chromatography. The phase structures and transition behaviors were studied using differential scanning calorimetry, polarized light microscopy, and small‐angle X‐ray scatter experiments. The experiment results revealed that the first‐generation dendronized polymer exhibited liquid crystalline behavior of the conventional side‐chain liquid crystalline polymer with azobenzene mesogen, that is, the polymer exhibited smectic phase structure at lower temperature and nematic phase structure at higher temperature. However, the second‐generation dendronized polymers exhibited more versatile intriguing liquid crystalline structures, namely smectic phase structure at lower temperature and columnar nematic phase structure at higher temperature, and moreover, the phase structure still remained before the decomposition temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1149–1159, 2010     

Substituent effect on azobenzene‐based liquid‐crystalline organophosphorus polymers

An Erratum has been published for this article in Journal of Polymer Science Part A: Polymer Chemistry (2003) 41(23) 3862 A new series of combined‐type, azobenzene‐based organophosphorus liquid‐crystalline polymers were synthesized, and their photoisomerization properties were studied. The prepared polymers contained azobenzene units as both the main‐chain and side‐chain mesogens. Various groups were substituted in the terminal of the side‐chain azobenzene mesogen, and the effects of the substituents were investigated. All the polymers were prepared at the ambient temperature by solution polycondensation with various 4‐substituted phenylazo‐4′‐phenyloxyhexylphosphorodichloridates and 4,4′‐bis(6‐hydroxyhexyloxy) azobenzene. The polymers were characterized with gel permeation chromatography, Fourier transform infrared, and ¹H, ¹³C, and ³¹P NMR spectroscopy. Thermogravimetric analysis revealed that all the polymers had high char yields. The liquid‐crystalline behavior of the polymers was examined with hot‐stage optical polarizing microscopy, and all the polymers showed liquid‐crystalline properties. The formation of a mesophase was confirmed by differential scanning calorimetry (DSC). The DSC data suggested that mesophase stability was better for electron‐withdrawing substituents than for halogens and unsubstituted ones. Ultraviolet irradiation studies indicated that the time taken for the completion of photoisomerization depended on the dipolar moment, size, and donor–acceptor characteristics of the terminal substituents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3188–3196, 2003     

Synthesis,photochemical and phase behavior of linear and hyperbranched photoactive benzylidene liquid‐crystalline polyesters

Photoactive hyperbranched benzylidene liquid‐crystalline polyester (PAHBP) and photoactive linear benzylidene liquid‐crystalline polyester (PALBP) were synthesized by solution polycondensation with pyridine as an acid acceptor. PAHBP and PALBP were thoroughly characterized with Fourier transform infrared, ¹H and ¹³C NMR, ultraviolet–visible spectrophotometry, fluorescent spectrophotometry, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, and polarized optical microscopy. Both polymers exhibited nematic mesophase. The glass‐transition temperature and liquid‐crystalline isotropic temperature of PAHBP were higher than those of PALBP. During photolysis under ultraviolet light, both polymers underwent an intermolecular photocycloaddition reaction, and the photoactivity of PAHBP was faster than that of PALBP; this was further confirmed by photoviscosity studies. PALBP and PAHBP were fluorescent in nature. An increase in the fluorescence intensity with the time of ultraviolet‐light irradiation was observed for both PAHBP and PALBP. The rate of increase in the fluorescence intensity of the linear analogue (PALBP) was higher than that of the hyperbranched polymer (PAHBP). This behavior could be attributed to the attainment of better planarity in the case of the linear one but not in the case of PAHBP because of the rapid crosslinking of PAHBP leading to an irregular architecture. This behavior was further confirmed by the calculation of the steric energy from corresponding model compounds. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3986–3994, 2006     

Copolymerization of glycolide and trimethylene carbonate

The bulk ring‐opening copolymerization of glycolide with trimethylene carbonate was performed under different conditions. The influence of the composition, temperature, reaction time, and catalyst on the chain microstructure was studied by means of ¹H and ¹³C NMR spectroscopy. The final microstructure was found to be highly dependent on the transesterification reactions. The thermal behavior was sensitive to the composition and to the length of the glycolyl microblocks. Differential scanning calorimetry and X‐ray diffraction demonstrated that glycolyl‐rich sequences could give rise to a single crystalline phase, whereas trimethylene carbonyl units were incorporated into the amorphous phase. The synthesis of copolymers from the melt‐state transesterification of polyglycolide and poly(trimethylene carbonate) homopolymer mixtures was also studied. The hydrolytic degradation rate of the copolymers was found to depend on the microstructure and in general was enhanced with the degree of randomness. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 993–1013, 2006     

Studies on the phase structure of ethylene‐vinyl acetate copolymers by solid‐state 1H and 13C NMR

The phase structure of a series of ethylene‐vinyl acetate copolymers has been investigated by solid‐state wide‐line ¹H NMR and solid‐state high‐resolution ¹³C NMR spectroscopy. Not only the degree of crystallinity but the relative contents of the monoclinic and orthorhombic crystals within the crystalline region varied with the vinyl acetate (VA) content. Biexponential ¹³C NMR spin–lattice relaxation behavior was observed for the crystalline region of all samples. The component with longer ¹³C NMR spin–lattice relaxation time (T₁) was attributed to the internal part of the crystalline region, whereas the component with shorter ¹³C NMR T₁ to the mobile crystalline component was located between the noncrystalline region and the internal part of the crystalline region. The content of the mobile crystalline component relative to the internal part of the crystalline region increased with the VA content, showing that the ¹³C NMR spin–lattice relaxation behavior is closely related to the crystalline structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2199–2207, 2002     

Highly thermal conductive benzoxazine‐epoxy interpenetrating polymer networks containing liquid crystalline structures

A diamine‐based benzoxazine monomer (Bz) and a liquid crystalline epoxy monomer (LCE) are synthesized, respectively. Subsequently, a benzoxazine‐epoxy interpenetrating polymer network (PBEI) containing liquid crystalline structures is obtained by sequential curing of the LCE and the Bz in the presence of imidazole. The results show that the preferential curing of LCE plays a key role in the formation mechanism of liquid crystalline phase. Due to the introduction of liquid crystalline structures, the thermal conductivity of PBEI increases with increasing content of LCE. When the content of LCE is 80 wt %, the thermal conductivity reaches 0.32 W m^?1 K^?1. Additionally, the heat‐resistance of PBEI is superior to liquid crystalline epoxy resin. Among them, PBEI55 containing equal weight of Bz and LCE has better comprehensive performance. Its thermal conductivity, glass transition temperature, and the 5 % weight loss temperature are 0.28 W m^?1 K^?1, 160 °C, and 339 °C, respectively. By introducing boron nitride (BN) fillers into PBEI55, a composite of PBEI/BN with the highest thermal conductivity of 3.00 W m^?1 K^?1 is obtained. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1813–1821     

Synthesis and structure of wholly aromatic liquid–crystalline polyesters containing meta- and ortholinkages

Wholly aromatic main-chain rigid-chain polymers containing meta- and orthokink linkages were synthesized. The thermal property, liquid crystallinity, and crystalline structure were studied using DSC, polarized light microscopy, and wide-angle X-ray scattering. These polymers exhibited liquid crystallinity up to 50 mol % of meta- and orthokink linkages. The existence of liquid crystallinity in these polymers may be attributed to the adoption of cis conformation in kink units in these polymers because the energy penalty for doing so can be compensated by the formation of the liquid–crystalline phase. The crystallinity of the polymers was low, and the crystal structure was quite similar to that of the pure polymers (without kink units). This can be explained by that fact that the crystal region mainly consists of the nonkink units, and the kink units disrupt the crystallization of the polymers and form defects. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1242–1248, 2001     

Synthesis,characterization, and photoreaction of photoreactive liquid crystalline block copolyetheresters

Photo-crosslinkable thermotropic liquid crystalline block copolyetheresters with photoreactive hard segment of poly(hexamethylene p-phenylenediacrylate) and soft segment of poly(tetramethylene ether) were synthesized by melt polycondensation from n-butyl-p-phenylenediacrylate, hexamethylene glycol, and poly(tetramethylene ether) glycol (PTMG, M_n = 1000–3000). The influence of molecular weight and composition of PTMG unit on the thermal behavior was determined by differential scanning calorimetry and polarized optical microscopy. All synthesized block copolymers show thermotropic liquid crystalline phase and can photo-crosslink by UV irradiation. Photoreaction of the copolymer thin film was carried out using Hg-UV light and investigated by FT–IR spectroscopy and a dynamic viscoelastic analyzer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1849–1855, 1997     

Main‐chain viologen polymers with organic counterions exhibiting thermotropic liquid‐crystalline and fluorescent properties*

A series of viologen polymers with bromide, tosylate, and triflimide as counterions were prepared by either the Menshutkin reaction or metathesis reaction in a common organic solvent. Their polyelectrolyte behavior in methanol was determined by solution viscosity measurements, and their chemical structures were determined by Fourier transform infrared and Fourier transform NMR spectroscopy. They were characterized for their thermotropic liquid‐crystalline properties with a number of experimental techniques. Each of the viologen polymers with organic counterions had a low melting transition or fusion temperature above which it formed either a high‐order smectic phase or a low‐order smectic phase. Each of them also exhibited a smectic‐to‐isotropic transition. The ranges of the liquid‐crystalline phase were 80–88 °C for viologen polymers with tosylate as a counterion and 120–146 °C for viologen polymers with triflimide as a counterion. They had excellent thermal stability. The ranges of thermal stability were 288–329 °C for viologen polymers with tosylate as a counterion and 343–350 °C for viologen polymers with triflimide as a counterion. The fluorescence property for all of the viologen polymers in either aqueous or methanol solution was also included in this study. For example, the viologen polymer containing the 4,4′‐bipyridinium and p‐xylyl units along the backbone of the polymer chain with triflimide as a counterion had an absorption spectrum (λ_max = 265 nm), an excitation spectrum (λ_ex values = 357, 443, and 454 with monitoring at 533 nm), and an emission spectrum (λ_em = 536 nm with excitation at 430 and 450 nm) in methanol. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 659–674, 2002; DOI 10.1002/pola.10134     

Synthesis and liquid crystalline properties of new amide‐modified poly(1,4‐cyclohexanedimethylene terephthalate)

New series of cycloaliphatic poly(ester‐amide)s, poly(1,4‐cyclohexanedimethyleneterephthalate‐co‐1,3‐cyclohexanedimethylene terephthalamide), were synthesized through solution polymerization route. The compositions of ester/amide units in the copolymers were varied from 0 to 100% by varying the amount of 1,4‐cyclohexanedimethanol and 1,3‐cyclohexanebis(methylamine) in the feed. The structures of the polymers were confirmed by NMR and FTIR, and the molecular weights were determined by inherent viscosity. The composition analysis by NMR reveals that the reactivity of the diamine toward the acid chlorides is lowered than that of diol, which results in the formation of more ester content in the poly (ester‐amides). The thermal analysis indicate that the new poly(ester‐amide)s having less than 10 mol % of amide linkages are thermotropic liquid crystalline from 200 to 250 °C and a thread like nematic phases are observed under the polarizing microscope. WXRD studies suggest that the liquid crystalline domains promote the nucleation process in the polyester chains and increases the percent crystallinity of the poly(ester‐amide)s. The glass transition temperature of the copolymers initially increases with increase in amide units because of the presence of nematic phases and subsequently follows the Flory–Fox behavior. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 42–52, 2006     

Copolymers of 2,5‐bis[(4‐methoxyphenyl) oxycarbonyl]styrene with styrene and methyl methacrylate: Synthesis,monomer reactivity ratios,thermal properties,and liquid crystalline behavior

Copolymers of a liquid crystalline monomer, 2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene (MPCS), with St and MMA were prepared by free radical polymerization at low conversion in chlorobenzene with 2,2′‐azobisisobutyronitrile (AIBN) as initiator. The copolymers of poly(MPCS‐co‐St) and poly(MPCS‐co‐MMA) were characterized by ¹H NMR and GPC. The monomer reactivity ratios were determined by using the extended Kelen–Tudos (EKT) method. Structural parameters of the copolymers were obtained from the possibility statistics and monomer reactivity ratios. The influence of MPCS content in copolymers on the glass transition temperatures of copolymers was investigated by DSC. The thermal stabilities of the two copolymer systems increased with an increase of the molar fraction of MPCS in the copolymers. The liquid crystalline behavior of the copolymers was also investigated using DSC and POM. The results revealed that the copolymers with high MPCS molar contents exhibited liquid crystalline behaviors. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2666–2674, 2005