Design of molecular architectures for polymeric mesophase formation

Based on the tendency of low molar mass liquid crystals composed of extended mesogens symmetrically disubstituted with long n-alkoxy substituents to exhibit smectic C mesophases, we have proposed that SCLCPs with laterally attached (vs. terminally attached) mesogens offer an ideal architecture for obtaining s_C* mesophases. In particular, mesogens that typically form the desirable s_C*-n phase sequence can be laterally attached to the polymer backbone through a chiral spacer, which should result in high values of spontaneous polarization. Not only are we using mesogens which exhibit s_C*-n phase sequences, we are also attempting to induce smectic layering into systems which typically form nematic mesophases by using immiscible hydrocarbon/fluorocarbon components and electron-donor-acceptor interactions. Thus far, the thermotropic behavior of poly{5-[[[2', 5'-bis[(3″-fluoro-4″-dimethoxyphenyl)ethynyl]benzyl]oxy]carbonyl[2.2.1]hept-2-ene]s and poly(5-[[[2',5'-bis[(3″-fIuoro-4″-methoxybenzoyl)oxy]benzyl]oxy]carbonyl]-bicyclo[2.2.1]hept-2-ene)s correspond to that of their low molar mass analogs. Preliminary results demonstrate that smectic layering is successfully induced in 2,5-bis[(4'-n-alkoxybenzoyl)oxy]toluenes and polynorbornenes with laterally attached 2,5-bis[(4'-n-alkoxybenzoyl)oxy]benzyl mesogens by terminating the n-alkoxy substituents with perfluorinated segments.     

Frustrated molecular packing in highly ordered smectic phase of side-chain liquid crystalline polymer with rigid polyacetylene backbone

Using poly(5-{[(4'-heptoxy-4-biphenylyl)carbonyl]oxy}-1-pentyne) as an example, we demonstrate the incorporative accommodation of the rigid polyacetylene backbones and the mesogenic pendants, which leads to a highly ordered smectic (Sm) phase with a frustrated structure. The polymer exhibits a recognizable sheetlike molecular shape due to its rigid backbone and relatively short spacer (three methylene units), and the building block of the liquid crystalline (LC) phase is the whole molecule. In the LC phase, five layers of the molecules stack as a smectic A (SmA) block, and adjacent SmA blocks glide halfway of the molecular width from one to another. In scanning tunneling microscopy (STM) experiments, the STM tip scrape is found to generate a regular nanopattern with periodic electron conductivity, of which the spacing is determined by the side-chain length.     

Oxyethylene copolymers with chloromethyl and (alkylthio)methyl or (alkylsulfonyl)methyl side groups: Syntheses and Tg/composition relationships

New classes of copolymers, poly[oxy(chloromethyl)ethylene]/poly[oxy-((alkylthio)methyl)ethylene] copolymers (CE-ATEs), poly[oxy((alkylthio)methyl)-ethylene]s (ATEs), poly[oxy(chloromethyl)ethylene]/poly[oxy((alkylsulfonyl)meth-yl)ethylene] copolymers (CE-ASEs), and poly[oxy((alkylsulfonyl)methyl)ethylene]s (ASEs) have been made for the first time. The thioether-containing polymers (CE-ATEs and ATEs) were synthesized by reacting poly[oxy(chloromethyl)ethylene] (CE, poly(epichlorohydrin)) with different amounts of sodium alkanethiolates. The sulfone-containing polymers (CE-ASEs and ASEs) were synthesized by oxidizing the CE-ATEs and ATEs using m-chloroperoxybenzoic acid. The Fox equation, a linear relationship, fit the T_g/composition data for most CE-ATEs. The T_g's of the CE-ASEs showed positive deviations from those calculated using the Fox equation. The Johnston equation, in which steric and/or polar interactions between dissimilar monomeric units are considered by using T_gAB (the T_g of the AB or BA dyad), fit the T_g/composition data for all copolymers in this study. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36 : 495–504, 1998     

Molecular engineering of liquid crystalline polymers by “living” polymerization. XXXII. Synthesis and “living” cationic polymerization of 3-fluoro-4′-(ω-vinyloxyalkoxy)-4-biphenylyl (2r,3s)-2-fluoro-3-methylpentanoate with undecanyl and octyl alkyl groups

The synthesis and “living” cationic polymerization of 3-fluoro-4′-(11-vinyloxyundecany-loxy)-4-biphenylyl (2R,3S)-2-fluoro-3-methylpentanoate ( 12-11 ) and 3-fluoro-4′-(8-vi-nyloxyoctyloxy)-4-biphenylyl (2R,3S)-2-fluoro-3-methylpentanoate ( 12-8 ) are presented. Poly ( 12-11 )s and poly ( 12-8 )s with degrees of polymerization from 4.0 to 16.5 and poly-dispersities ≤ 1.13 have been synthesized and characterized by differential scanning cal-orimetry (DSC) and thermal optical polarized microscopy. Over the entire range of molecular weights poly ( 12-11 )s and poly ( 12-8 )s exhibit an enantiotropic S_A and an unidentified S_X phase. In addition, regardless of its molecular weight, poly ( 12-8 ) exhibits a S^*_c phase in between the S_A and S_x phases. Poly ( 12-11 ) and poly ( 12-8 ) show lower transition tem-peratures and broader temperature ranges of all their mesophases as compared to the corresponding polymers without a fluorine atom on the biphenyl group. The role of the connecting group between the biphenyl and chiral group of the mesogenic unit on the phase behavior of these polymers is also discussed. Copolymers of 12-8 with (2R,3S)-2-fluoro-3-methylpentyl 4′-(11-vinyloxyundecanyloxy)biphenyl-4-carboxylate ( 13-11 ) {i.e., poly-[( 12-8 )-co-( 13-11 )] (X/Y), where X/Y represents the molar ratio of monomer 12-8 to monomer 13-11 } with DP of ca. 11 and polydispersities lower than 1.23 were also syn-thesized and characterized. Their S_A and S^*_c mesophases exhibit continuous dependences of composition and this support the assignment of the mesophases exhibited by poly ( 12-8 ). © 1995 John Wiley & Sons, Inc.     

Synthesis and photoisomerization of poly(1‐methylpropargyl ester)s carrying azobenzene moieties

Optically active 1‐methylpropargyl esters bearing azobenzene groups, namely, (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐butyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 1 ), (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐hexyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 2 ), and (S)‐(?)‐3‐methyl‐3‐{4‐[4‐(n‐octyloxy)phenylazophenyl]carbonyl}oxy‐1‐propyne ( 3 ) were synthesized and polymerized with Rh⁺(nbd)[η⁶‐C₆H₅B^?(C₆H₅)₃] (nbd, norbornadiene) as a catalyst to afford the corresponding poly(1‐methyloropargyl ester)s with moderate molecular weights (M_n = 24,000–31,300) in good yields (79–84%). Polymers were soluble in common organic solvents including toluene, CHCl₃, CH₂Cl₂, THF, and DMSO, whereas insoluble in diethyl ether, n‐hexane, and methanol. Large optical rotations and strong CD signals demonstrated that all the polymers take a helical structure with a predominantly one‐handed screw sense. The helical structure of the polymers changed with the addition of MeOH and heat. The trans‐azobenzene of the polymer side chains isomerized into cis on UV irradiation, which was accompanied with drastic helical conformational changes of the polymer backbone. The cis‐azobenzene moiety reisomerized into trans on visible‐light irradiation, which induced the recovery of chiral geometry of azobenzene moieties in the side chain. Conformational analysis revealed that the polymers form a tightly twisted right‐handed helical structure with a dihedral angle of 70° at the single bond of the main chain. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4749–4761, 2009     

Regioselective Deprotection and Acylation of Penta-N-Protected Thermopentamine

The synthesis of the penta-N-protected polyamide 1 (tert-butyl N-{9-allyl-16-azido-13-(trifluoroacetyl)-4-[2-(trimethylsilyl)ethylsulfonyl]-4,9,13-triazahexadecyl]carbamate=tert-butyl N-{3-{{4-{allyl{3-[(3-azidopropyl)(trifluoroacetyl)aminopropyl}amino}butyl}{[2-(trimethylsilyl)ethyl]sulfonyl}amino}propyl}carbamate) is described, a derivative of thermopentamine (PA 3433) containing five independently removable amino-protecting groups. The selective deprotection of the five protecting groups used, i.e., of allyl, azido, (tert-butoxy)carbonyl (Boc), trifluoroacetyl, and [2-(trimethylsilyl)ethyl]sulfonyl (SES), as well as the rapid transamidation reaction of the trifluoroacetyl group yielding secondary amides is discussed. Subsequent acylation with 4-methoxycinnamoyl chloride at each N-atom of the pentamine backbone is achieved. For the acylation of the terminal N-atom the azido group is replaced by a (2,2,2-trichloro-1,1-dimethylethoxy)carbonyl (Tcboc) group.     

4H-Chromenone Glycosides from Eranthis hyemalis (L.) SALISBURY

Investigation of the tubers of Eranthis hyemalis (Ranunculaceae) afforded six chromenone glycosides. Their structures have been elucidated mainly by spectroscopic (FAB-MS, 2D-NMR techniques) and chemical methods (acidic and enzymatic hydrolysis) as 9-{[(β-D -glucopyranosyl)oxy]methyl}-8,11-dihydro-5-hydroxy-2-methyl-4H-pyrano[2,3-g][1]benzoxepin-4-one ( 1 ), 9-{[(β-D -gentiobiosyl)oxy]methyl}-8,11-dihydro-5-hydroxy-2-methyl-4H-pyrano[2,3-g][1]benzoxepin-4-one( 2 ), 9-{[(β-D -glucopyranosvl)oxy]melhyl}-8,11-dihydro-5-hydroxy-2-(hydroxy-methyl)-4H-pyrano[2,3-g][1]benzoxepin-4-one( 3 ), 8-{(2E)-4-[(β-D -glucopyranosyl)oxy]-3-methylbut-2-enyl}-5,7-dihydroxy-2-methyl-4H-1-benzopyran-4-one ( 4 ), 8-{(2E)-4-[(β-D -glucopyranosyi)oxy]-3-methylbut-2-enyl}-5,7-dihydroxy-2-(hydroxymethyl)-4H-1-benzopyran-4-one ( 5 ), and 7-{[(β-D -glucopyranosy1)oxy]methyl}-2,3-dihydro-2-(l-hydroxy-1-methylethyl)-4-methoxy-5H-furo[3,2-g][1]benzopyran-5-one ( 6 ). Compound 2 exhibited negative inotropic activity.     

Novel polypyromellitimides and their liquid crystal aligning properties

Various aromatic poly{3,6‐bis[(4‐n‐alkyloxy)phenyloxy]‐pyromellitimide}s [poly(Ar‐C_m‐PMDA)s, m = 1, 4, 8, 12] were prepared in film form by routine two‐step condensation of 3,6‐bis[(4‐n‐alkyloxy)phenyloxy]pyromellitic dianhydrides (C_m‐PMDAs) with various aromatic diamines. After characterization of their chemical structures their solution, thermal and liquid crystal (LC)‐aligning properties in terms of pretilt angle at various rubbing densities were measured and discussed with respect to their backbone structures. All polyimide films showed excellent thermal stability and homogeneous LC alignment, but the poly(p‐phenylene‐C₁₂‐PMDA) exhibited completely homeotropic alignment while the pretilt angle values of poly(p‐phenylene‐C₈‐PMDA) varied with varying rubbing density.     

Syntheses of Stable α-Silyloxyepoxides and α-Chloroalkyl Silyl Ethers Derivatives of 3,10-Dioxa-5-azatricyclo[5.2.1.02,6]dec-4-enes

The Diels-Alder adduct (±)-5 of furan to 1-cyanovinyl acetate was converted to (1RS,2RS,6RS,7SR,8SR,10RS)-10-{[(tert-butyl)dimethylsilyl]-oxy}-4-ethoxy (1) and -4-phenyl-3,9,11-trioxa-5-azatetracyclo[5.3.1.0^2,6.0^8,10]-undec-4-ene (2). These compounds reacted with TiCl₄ to afford stable (1RS,2RS,6RS,7SR,8SR,9SR)-9-{[(tert-butyl)dimethylsilyl]oxy}-9-chloro-4-ethoxy-3,10-dioxa-5-azatricyclo[5.2.1.0^2,6]decan-8-ol (3) and (1RS,2RS,6RS,7SR,8SR,9SR)-9-{[(tert-butyl)dimethylsilyl]oxy}-9-chloro-4-phenyl-3,10-dioxa-5-azatricyclo[5.2.1.0^2,6]decan-8-ol (4), respectively.     

Nucleotides,Part LXVIII,Acetals as New 2′‐O‐Protecting Functions for the Synthesis of Oligoribonucleotides: Synthesis of Monomeric Building Units and Oligoribonucleotides

For the efficient synthesis of oligoribonucleotides by the 5′‐O‐(4,4′‐dimethoxytrityl) phosphoramidite approach, the 2′‐O‐[1‐(benzyloxy)ethyl]acetals 56 – 67 were investigated. Studies with the 2′‐O‐[1‐(benzyloxy)ethyl]‐5′‐O‐(dimethoxytrityl)ribonucleoside 3′‐phosphoramidites 56 – 59 gave, however, only reasonable results. The oligoribonucleotides obtained showed some impurities since the acid stabilities of the acetal and dimethoxytrityl functions are too close to guarantee a high selectivity. A combination of new acid‐labile protected 2′‐O‐protecting groups with the 2‐(4‐nitrophenyl)ethyl/[2‐(4‐nitrophenyl)ethoxy]carbonyl (npe/npeoc) strategy for base protection was more successful. The synthesis and physical properties of the monomeric building units and their intermediates 8 – 67 and the conditions for the automated generation of homo‐ and mixed oligoribonucleotides is described. The new 2′‐acetal protecting group could be cleaved off in a two step procedure and was designed for levelling their stability with regard to the attached nucleobase as well. Therefore, we used the 1‐{{3‐fluoro‐4‐{{[2‐(4‐nitrophenyl)ethoxy]carbonyl}oxy}benzyl}oxy}ethyl (fnebe) moiety for the protection of 2′‐OH of uridine, and for that of 2′‐OH of A, C, and G, the 1‐{{4‐{{[2‐(4‐nitrophenyl)ethoxy]carbonyl}oxy}benzyl}oxy}ethyl (nebe) residue. After selective deprotection by β‐elimination induced by a strong organic base like DBU, the remaining activated acetal was hydrolyzed under very mild acidic protic conditions, which reduced 2′‐3′ isomerization and chain cleavage. Also storage, handling, and purification of the chemically and enzymatically sensitive oligomers was simplified by this approach.     

5-{[(4′-正戊基氧-4-联苯基基)羰基]氧}-1-戊炔的相转变与相结构

采用差示扫描量热(DSC)、一维(1D)广角X射线衍射(WAXD)、热台偏光显微镜(PLM-hotstage)等研究手段对含联苯液晶基元的侧链液晶聚炔单体5-{[(4′-正戊基氧-4-联苯基基)羰基]氧}-1-戊炔(A3EO5)的本体相转变和相结构进行了研究.DSC和1D-WAXD实验结果表明,A3EO5在升温和降温过程中均呈现四个相转变过程,形成双向性液晶.样品从各向同性态降温至室温过程中,首先形成近晶A相,随后进入层内排列具有准长程有序的近晶B相,继续降温将形成层内为正交排列的近晶E相,在此之后样品进入晶相.PLM结果指出样品在各向同性态降温过程中分别形成球状织构、角锥织构和同心圆弧织构.     

Asymmetric Synthesis and DNA Intercalation of (-)-6-[[(Aminoalkyl)oxy]methyl]-4-demethoxy-6,7- dideoxydaunomycinones(1)(,)

The BF(3).Et(2)O-promoted Diels-Alder addition of 1-acetylvinyl RADO(Et)-ate (RADO(Et)-ate = 3-ethyl-2-oxo-6,8-dioxa-3-azabicyclo[3.2.1]octane-7-exo-carboxylate) to 1-(dimethoxymethyl)-2,3,5,6-tetramethylidene-7-oxabicyclo[2.2.1]heptane led to one major monoadduct that added to 1,2-didehydrobenzene and was converted into (-)-4-demethoxy-7-deoxydaunomycinone and (2R)-12-acetoxy-2-acetyl-5-(bromomethyl)-1,2,3,4-tetrahydronaphthacen-2-yl RADO(Et)-ate. The latter compound was used to construct (8R)-8-acetyl-6,8-dihydroxy-11-[[(3'-[(aminopropyl)oxy]-, -4'-[(aminobutyl)oxy], and -5'-[(aminopentyl)oxy]methyl]-7,8,9,10-tetrahydronaphthacene-5,12-dione hydrochloride (-)-8, (-)-9, (-)-10, respectively, as well as (8R)-8-acetyl-6,8-dihydroxy-11- [[[2'-[(3"-aminopropyl)amino]ethyl]oxy]- ((-)-11) and -[[3'-[(3"-aminopropyl)amino]propyl]oxy]methyl]-7,8,9, 10-tetrahydronaphthacene-5,12-dione hydrochloride ((-)-12). (8R)-8-Acetyl-6,8-dihydroxy-11-[[(alpha-L-daunosaminyl)oxy]methyl]-7,8,9,10-tetrahydronaphthacene-5,12-dione hydrochloride ((-)-13), a mimic of idarubicin, was also prepared. Absorbance and fluorescence titration experiments showed (-)-8, (-)-9, and (-)-10 to intercalate calf thymus DNA whereas (-)-11, (-)-12, and (-)-13 did not. The best intercalator was (-)-9 (K(b) = (1.1 +/- 0.1) x 10(5) M(-)(1)) with the [(4'-aminobutyl)oxy]methyl chain. Inhibition of topoisomerase II-induced DNA strand religation was observed for (-)-8 at a concentration of 50 &mgr;M.     

聚｛11-[(4′-正庚氧基-4-联苯基)羰基]氧-1-十一炔｝的相结构与相转变

采用示差扫描量热法(DSC)、一维(1D)、二维(2D)广角X-射线衍射(WAXD)和偏光显微镜(PLM)等研究手段对聚{11-[(4′-正庚氧基-4-联苯基)羰基]氧-1-十一炔}(PA-9,7)的本体相转变和相结构进行研究,并采用分子动力学方法对相结构进行模拟.结果表明,样品的相转变为近晶B相(SmB)近晶A相(SmA)各向同性态(Iso).在近晶B相中,侧链在层状结构中排列成具有六次对称性的准长程有序结构。     

Synthesis and investigation of spectroelectrochemical properties of peripherally tetra-substituted phthalocyanine bearing 3-(4-{[3-(trifluoromethyl)benzyl]oxy}phenyl)propan-1-ol and its metallo compounds

In this study, the new compounds; 3-(4-{[3-(trifluoromethyl)benzyl]oxy}phenyl)propan-1-ol 3 was prepared by the reaction of 4-(3-hydroxypropyl)phenol 1 with 1-(bromomethyl)-3-(trifluoromethyl)benzene 2 and 4-[3-(4-{[3 (trifluoromethyl)benzyl]oxy}phenyl)propoxy] phthalonitrile 5 was synthesized by the reaction of 4-nitrophthalonitrile 4 with 3-(4-{[3-(trifluoromethyl)benzyl]oxy}phenyl)propan-1-ol 3. Novel peripherally tetra substituted H₂Pc 6, Co(II) 7, Cu(II) 8, Ni(II) 9 and Fe(II) 10 phthalocyanines, which have peripheral positions with 4-[3-(4-{[3 (trifluoromethyl)benzyl]oxy}phenyl)propoxy] groups, were synthesized and all of the new compounds characterized by IR, ¹H NMR, ¹³C NMR, UV–Vis, mass spectroscopies and elemental analysis. The electrochemical and spectroelectrochemical investigation of the phthalocyanines carrying 4-[3-(4-{[3 (trifluoromethyl)benzyl]oxy}phenyl)propoxy] groups were studied using various electrochemical techniques in DMF on a glassy carbon electrode. Cyclic voltammetry and square wave voltammetry studies show that the complexes have either metal based or ligand-based diffusion controlled electron transfer properties. To shed more light on the electron-transfer steps of the complexes and assignments of the redox couples were carried out by spectroelectrochemical measurements. The color changes during spectral changes of redox species were recorded with in situ electrocolorimetric measurements. The electrochemical and in situ UV–Vis spectral change of complexes indicated their applicability in the fields of the electrochemical technologies.     

Synthesis of novel azabicyclo derivatives containing a thiazole moiety and their biological activity against pine-wood nematodes

Abstract

To explore a new skeleton with nematicidal activity, a series of novel azabicyclo derivatives containing a thiazole moiety were designed, synthesized and evaluated for their nematicidal activities. The bioassay results against pine-wood nematodes (Bursaphelenchus xylophilus) showed that most of the title compounds displayed nematicidal activity at a concentration of 40?mg/L. Especially, the title compounds2-((8-methyl-8-azabicyclo[3.2.1]octan-3-yl)oxy)-4-(4-chlorophenyl)thiazole (7e), 2-((8-methyl-8-azabicyclo[3.2.1]octan-3-yl)thio)-4-phenylthiazole (10a) and 2-((8-methyl-8-azabicyclo [3.2.1]octan-3-yl)thio)-4-(4-chlorophenyl)thiazole (10e) exhibited more than 90% mortality against Bursaphelenchus xylophilus.     

Amphiphilic block glycopolymers via atom transfer radical polymerization: Synthesis,self‐assembly and biomolecular recognition

In this work the synthesis of poly(butyl acrylate)‐b‐poly(2‐{[(D ‐glucosamin‐2‐N‐yl)carbonyl]oxy}ethyl methacrylate) (PBA‐b‐PHEMAGl) diblock glycopolymer and poly(2‐{[(D ‐glucosamin‐2‐N‐yl)carbonyl]oxy}ethyl methacrylate)‐b‐poly(butyl acrylate)‐b‐poly(2‐{[(D ‐glucosamin‐2‐N‐yl)carbonyl]oxy}ethyl methacrylate) (PHEMAGl‐b‐PBA‐b‐PHEMAGl) was performed via atom transfer radical polymerization. Monofunctional and difunctional poly(butyl acrylate) macroinitiators were used to synthesize the well‐defined diblock and triblock glycopolymers by chain extension reaction with the glycomonomer HEMAGl. The self‐assembly of these glycopolymers in aqueous solution was studied by dynamic light scattering and transmission electron microcopy, showing the coexistence of spherical micelles and polymeric vesicles. In addition, the biomolecular recognition capacity of these micelles and vesicles, containing glucose moieties in their coronas, was investigated using the lectin Concanavalin A, Canavalia Ensiformis, which specifically interacts with glucose groups. The binding capacity of Concanavalin A with glycopolymer is influenced by the copolymer composition, increasing with the length of HEMAGl glycopolymer segment in the block copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Layer-by-layer self-assembly and electrocatalytic properties of poly(ethylenimine)-silicotungstate multilayer composite films

Hybrid multilayer films composed of poly(ethylenimine) and the Keggin-type polyoxometalates [ SiW₁₁O₃₉ ]^{8 -} ( SiW₁₁ ) {\left[ {{\hbox{Si}}{{\hbox{W}}_{{11}}}{{\hbox{O}}_{{39}}}} \right]^{{8} - }}\left( {{\hbox{Si}}{{\hbox{W}}_{{11}}}} \right) and [ SiW₁₁Co^II( H₂O )O₃₉ ]^{6 -} ( SiW₁₁Co ) {\left[ {{\hbox{Si}}{{\hbox{W}}_{{11}}}{\hbox{C}}{{\hbox{o}}^{\rm{II}}}\left( {{{\hbox{H}}_2}{\hbox{O}}} \right){{\hbox{O}}_{{39}}}} \right]^{{6} - }}\left( {{\hbox{Si}}{{\hbox{W}}_{{11}}}{\hbox{Co}}} \right) were prepared on glassy carbon electrodes by layer-by-layer self-assembly, and were characterized by cyclic voltammetry and scanning electron microscopy. UV-vis absorption spectroscopy of films deposited on quartz slides was used to monitor film growth, showing that the absorbance values at characteristic wavelengths of the multilayer films increase almost linearly with the number of bilayers. Cyclic voltammetry indicates that the electrochemical properties of the polyoxometalates are maintained in the multilayer films, and that the first tungsten reduction process for immobilized SiW₁₁ and SiW₁₁Co is a surface-confined process. Electron transfer to [ Fe( CN )₆ ]^{3 - /4 -} {\left[ {{\hbox{Fe}}{{\left( {\hbox{CN}} \right)}_6}} \right]^{{3} - /{4} - }} and [ Ru( NH₃ )₆ ]^{3 + /2 +} {\left[ {{\hbox{Ru}}{{\left( {{\hbox{N}}{{\hbox{H}}_3}} \right)}_6}} \right]^{{3} + /{2} + }} as electrochemical probes was also investigated by cyclic voltammetry. The (PEI/SiW₁₁Co)_n multilayer films showed excellent electrocatalytic reduction properties towards nitrite, bromate and iodate.     

Synthesis and properties of poly(oxyethylene)s containing thioether,sulfoxide, or sulfone groups

Poly[oxy(ethylthiomethyl)ethylene] (ETE) was prepared from poly[oxy (chloromethyl)ethylene] (CE) by reaction with sodium ethanethiolate. Sulfoxide and sulfone analogues were synthesized by oxidation of the poly[oxy(ethylthiomethyl)ethylene]. By changing the chloromethyl/sodium ethanethiolate ratio, poly[oxy (chloromethyl)ethylene-co-oxy(ethylthiomethyl)ethylene] (CE-ETEs) were easily made. Poly[oxy(ethylsulfinylmethyl)ethylene] (ESXE), poly[oxy(chloromethyl)ethylene-co-oxy(ethylsulfinylmethyl)ethylene] (CE-ESXEs), poly[oxy(ethylsulfonylmethyl)ethylene] (ESE), and poly[oxy(chloromethyl)ethylene-co-oxy(ethylsulfonylmethyl)ethylene] (CE-ESEs) were obtained by oxidation of ETE or CE-ETEs. There was little if any chain degradation. The (co)polymer structures were confirmed by FTIR and ¹H-NMR spectroscopic studies. Their thermal properties were studied by DSC and TGA. T_gs of ETE, ESXE, and ESE were -57, 36, and 57°C, respectively, and T_d,os (initial decomposition temperature, TGA) were 331, 198, and 308°C, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 793–801, 1998     

Molecular Engineering of Liquid Crystal Polymers by Living Polymerization. VIII. Influence of Molecular Weight on the Phase Behavior of Poly {ω-[(4-Cyano-4′-biphenyl)-oxy]alkyl Vinyl Ether}s with Ethyl,Propyl, and Butyl Alkyl Groups

The synthesis and living cationic polymerization of 2-[4-cyano-4′-biphenyl)oxy]ethyl vinyl ether (6–2), 3-[4-cyano-4′-biphenyl)oxy]-propyl vinyl ether (6-3), and 4-[4-cyano-4′-biphenyl)oxy]butyl vinyl ether (6-4) are described. The mesomorphic behaviors of poly(6–2), poly(6-3), and poly(6-4) with different degrees of polymerization and narrow molecular weight distributions were compared to those of 6–2, 6–3, and 6–4 and of 2-[(4-cyano-4′-biphenyl)oxy]ethyl ethyl ether (8–2), 3-[(4-cyano-4′-biphenyl)oxy]propyl ethyl ether (8–3), and 4-[4-cyano-4′-biphenyl)oxy]butyl ethyl ether (8–4) which are model compounds of the monomeric structural units of poly(6–2), poly(6–3), and poly(6–4). In the first heating scan, all three polymers exhibit an x (unidentified) mesophase which overlaps the glass transition temperature, and an enantiotropic nematic mesophase. In the second and subsequent heating and cooling scans, poly(6–3) and poly(6–4) display only the enantiotropic nematic mesophase. Both in the first and subsequent scans, only poly(6–2) with degrees of polymerization lower than 4 exhibits an enantiotropic nematic mesophase.     

π-Conjugated soluble and fluorescent poly(thiophene-2,5-diyl)s with phenolic,hindered phenolic and p-C6H4OCH3 substituents. Preparation,optical properties,and redox reaction

Dehalogenation polycondensation of 3-(4-methoxyphenyl)-2,5-dibromothiophene with Mg and a zerovalent nickel complex as well as chemical oxidative polymerization of 3-(4-methoxyphenyl)thiophene with FeCl₃ gives poly[3-(4-methoxyphenyl)thiophene-2,5-diyl] P3(4-MeOPh)Th. Treatment of soluble P3(4-MeOPh)Th with BBr₃ converts the OCH₃ group to an OH group and gives poly[3-(4-hydroxyphenyl)thiophene-2,5-diyl] P3(4-OHPh)Th. Oxidative polymerization of 3-[3,5-di-t-butyl-4-{(trimethylsilyl)oxy}phenyl]thiophene with FeCl₃ in an aqueous medium directly affords another kind of polythiophene with a sterically hindered phenolic group, poly[3-(3,5-di-t-butyl-4-hydroxyphenyl)thiophene-2,5-diyl] P3(4-OH-3,5-tBu₂Ph)Th. An organometallic dehalogenation polymerization using a nickel complex also affords P3(4-OH-3,5-tBu₂Ph)Th. All the polymers described above show strong photoluminescence in a region of 500–600 nm. Oxidation of P3(4-OH-3,5-tBu₂Ph)Th with PbO₂ gives stable radical species as confirmed by IR and ESR spectroscopy. Electrochemical redox behavior of the polymers is compared with that of other polythiophenes. © 1997 John Wiley & Sons, Inc.