Simultaneous liquid chromatographic assay of amantadine and its four related compounds in phosphate-buffered saline using 4-fluoro-7-nitro-2,1,3-benzoxadiazole as a fluorescent derivatization reagent

Simultaneous HPLC assay of 1-adamantanamine hydrochloride (amantadine) and its four related compounds [2-adamantanamine hydrochloride (2-ADA), 1-adamantanmethylamine (ADAMA), 1-(1-adamantyl)ethylamine hydrochloride (rimantadine) and 3,5-dimethyl-1-adamantanamine hydrochloride (memantine)] in phosphate-buffered saline (pH 7.4) after pre-column derivatization with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) was developed. Phosphate-buffered saline samples were mixed with borate buffer and NBD-F solution in acetonitrile at 60 degrees C for 5 min and injected into HPLC. Five derivatives were well separated from each other. The lower limits of detection of amantadine, 2-ADA, ADAMA, rimantadine and memantine were 0.008, 0.001, 0.0008, 0.0015 and 0.01 microg/mL, respectively. The coefficients of variation for intra- and inter-day assay were less than 6.4 and 8.2%, respectively. The method presented was applied to a binding study of these compounds to human alpha(1)-acid glycoprotein. While affinity constants and capacities for ADAMA, rimantadine and memantine were calculated by means of Scatchard plots, those for the others were not determined. ADAMA, rimantadine and memantine were bound with different affinities and capacities. These results indicate that NBD-F is a good candidate as a fluorescent reagent to simultaneously determine amantadine and its four related compounds by HPLC after pre-column derivatization. Our method can be applied to binding studies for protein.     

High-performance liquid chromatographic determination of 3-hydroxykynurenine with fluorimetric detection; comparison of preovulatory phase and postovulatory phase urinary excretion.

A high-performance liquid chromatographic assay for 3-hydroxykynurenine in human urine is described. A fluorescent derivative of 3-hydroxykynurenine was prepared, based on the reaction of the compound with p-toluenesulphonyl chloride in a basic medium. The analytical method for the measurement of the fluorescent compound employed a Tosoh ODS 80 column eluted with 10 mM potassium dihydrogenphosphate (pH 4.5) and acetonitrile (3:2, v/v) and detection at an excitation wavelength of 375 nm (10 nm bandpass) and an emission wavelength of 455 nm (10 nm bandpass). The column temperature was maintained at 25 degrees C. The detection limit was 3 pmol (673 pg) at a signal-to-noise ratio of 5:1. The fluorescent derivative of 3-hydroxykynurenine was eluted at ca. 12.5 min. The technique was applied to the analysis of human urine. The total analysis time was ca. 15 min.     

Simultaneous determination of amantadine and rimantadine by HPLC in rat plasma with pre-column derivatization and fluorescence detection for pharmacokinetic studies

We investigated simultaneous high-performance liquid chromatographic (HPLC) determination of amantadine hydrochloride (AMA) and rimantadine hydrochloride (RIM) levels in rat plasma after fluorescent derivatization with o-phthalaldehyde and 2-mercaptoethanol. Afterwards, the method was applied to determine their pharmacokinetics. The retention times of AMA and RIM derivatives were 12.6 and 22.2 min and the lower limits of detection were 0.025 and 0.016 microg/mL, respectively. The coefficients of variation for intra- and inter-day assay of AMA and RIM were less than 5.1 and 7.6%, respectively. After i.v. administration of AMA or RIM to rats, the total body clearance and distribution volume at the steady-state of RIM were higher than those of AMA. Bioavailability of AMA and RIM was 34.9 and 37.2%, respectively. When AMA and RIM were p.o. co-administered, the area under the plasma concentration--time curve of RIM was significantly lower than that after RIM alone. On the other hand, pharmacokinetic parameters of AMA did not significantly change. These results indicate that our HPLC assay is simple, rapid, sensitive and reproducible for simultaneously determining AMA and RIM concentrations in rat plasma and is applicable to their pharmacokinetic studies. Also, co-administration of AMA and RIM may result in the lack of pharmacological effects of RIM.     

High-performance liquid chromatography assay for 1-deoxy-D-xylulose 5-phosphate synthase activity using fluorescence detection

A high-performance liquid chromatography assay for activity of 1-deoxy-D-xylulose 5-phosphate synthase, an early enzyme in the recently discovered 2-C-methyl-D-erythritol-4-phosphate pathway, was developed. In this assay, the enzymatic product 1-deoxy-D-xylulose was first derivatized with a fluorescent reagent 2-anthranilic acid, followed by separation using HPLC on a Nova-Pak phenyl column with a mobile phase containing CH3CN-water-1-butylamine-tetrahydrofuran-H3PO4 (2:97:0.125:0.5:0.25, v/v). The eluate was monitored by fluorescence detection at an excitation wavelength of 320 nm and an emission wavelength of 425 nm for quantitation of the fluorescent derivative. A linear response was obtained between 5 and 200 ng of 1-deoxy-D-xylulose. This assay was successfully applied to measure the 1-deoxy-D-xylulose 5-phosphate synthase activity in a recombinant E. coli overexpressing dxs gene. It demonstrated that this assay is simple, sensitive and selective compared to the methods used at present.     

Simultaneous determination of gallium and aluminium in biological samples by conventional luminescence and derivative synchronous fluorescence spectrometry

The simultaneous determination of gallium and aluminium by using conventional fluorimetry and derivative synchronous fluorescence spectrometry has been studied. These determinations are based on the formation of fluorescent complexes of gallium and aluminium with salicylaldehyde carbohydrazone (SACH). In the conventional method, two samples are analysed under different analytical conditions, and the results are evaluated by solving a system of two simultaneous equations. In the derivative synchronous method (at pH = 2.6, in an ethanol-water medium containing 72% of ethanol), the following conditions are used: a constant wavelength difference of 20 nm between the monochromator settings, a time-constant of 1.5 sec, a scan-speed of 120 nm/min, and a derivative wavelength difference of 10 nm; gallium can be determined in the range 7-38 ng/ml, and aluminium between 6 and 45 ng/ml. The synchronous method shows more advantages, and has been used in the determination of both metal ions in diverse biological samples (animal tissues and human serum) with good results.     

Synthesis of a novel fluorescent probe based on acridine skeleton used for sensitive determination of DNA

In this study, a novel fluorescent probe of acridine derivative N-((N-(2-dimethylamino)ethyl)acridine-4-carboxamide)-alpha-alanine (N-(ACR-4-CA)-alpha-ALA) was synthesized. The structure of the new compound was characterized by (1)H NMR, MS, elemental analysis, fluorescent and ultraviolet spectra. It was found that DNA had the ability to quench the fluorescence of N-(ACR-4-CA)-alpha-ALA, and the quenched intensity of fluorescence was proportional to the concentration of DNA. A method for DNA determination based on the quenching fluorescence (lambda(ex) = 260 nm, lambda(em) = 451 nm) of N-(ACR-4-CA)-alpha-ALA was established. Under optimal conditions, the linear range is 0.05-2.0 microg mL(-1) for both fish semen (fsDNA) and calf thymus DNA (ctDNA). The corresponding determination limits are 9.1 ng mL(-1) for fsDNA and 8.7 ng mL(-1) for ctDNA, respectively. The results suggested that the interaction mode between N-(ACR-4-CA)-alpha-ALA and DNA was intercalative binding. The intrinsic binding constant was determined and the result showed a large binding constant of N-(ACR-4-CA)-alpha-ALA with DNA.     

Second derivative spectrophotometric method for simultaneous determination of cobalt, nickel and iron using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A simple, sensitive and rapid derivative spectrophotometric method using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) has been developed for simultaneous determination of Co(II), Ni(II) and Fe(II) which have very similar chemical behavior and appear together in many real samples. The complexes of all these metal ions with 5-Br-PADAP were formed immediately at pH 7.0 ammonium acetate buffered solution and were stable for at least 24 h. Second derivative spectra were selected for evaluation, because working wavelength determination was more precise and spectral overlap was less than in the ordinary and first derivative spectra. Three wavelengths at which the complexes exhibit extremum ²D values for Co(II), Ni(II) and Fe(II) were selected as analytical wavelengths, i.e., 640, 600 and 740 nm, respectively. Calibration curves drawn with zero-to-peak values at mentioned wavelengths were linear between 80 and 2000 ng ml⁻¹ for each metal ion. Concentrations of Co(II) and Ni(II) were calculated from the total ²D values and the sum of the linear equations for these three cations at 640 and 600 nm, after Fe(II) assay by making use of the ²D value at 740 nm. Limits of detection (LOD) for Co(II), Ni(II) and Fe(II) were 2.7, 13.9 and 3.0 ng ml⁻¹, respectively. The method has been applied to tool steel and heater resistance wire samples successfully.     

Determination of pyrimethamine in animal tissue and egg by liquid chromatography with fluorescence detection

A sensitive and selective liquid chromatographic (LC) assay was developed to determine the concentration of pyrimethamine in animal tissue and egg by fluorescent derivative. Animal samples were extracted with acetonitrile, centrifuged, and purified by hexane. Fluorescent derivatization was performed by reacting pyrimethamine with chloroacetaldehyde and subjected to LC with fluorescence detection (excitation wavelength 300 nm, emission wavelength 420 nm). The limit of detection was 10 ng/g (10 ppb) and the standard calibration curve was linear in the range of 1-100 ppb (0.01-1 ng/10 microL). Recoveries from samples fortified at levels of 0.1 and 1 ppm (microg/g) were 61.0-77.4 and 65.5-81.2%, respectively. The method was applied to the monitoring of marketed samples. Pyrimethamine was not determined in any of the 70 samples: 20 swine muscle; 20 chicken muscle; 10 chicken liver; and 20 egg.     

Simple HPLC determination of colistin in medicated feeds by pre-column derivatization and fluorescence detection

Summary A simple and sensitive HPLC method was developed for the determination of colistin antibiotic in feeds employing pre-column derivatization and fluorescence detection. Extraction of colistin in feeds was by sonication and shaking with 0.1 M HCl. Pre-column derivatization was with phthaldialdehyde and 2-mercaptoethanol (ME) in borate buffer (pH 10.5) to obtain a fluorescent derivative. Elution of the derivative onto an Ultracarb 5 μm ODS column was by using acetonitrile—ultrapure water (75∶25). Detection was by spectrofluorimetry at 340 nm (excitation wavelength) and 440 nm (emission wavelength). Total elution time was <20 min. The applicability of the validated method was tested by analyzing commercial medicated feeds without any interference from the matrix.     

Simultaneous analysis of haloperidol, its three metabolites and two other butyrophenone-type neuroleptics by high performance liquid chromatography with dual ultraviolet detection

We investigated simultaneous determination of haloperidol (HAL), its three metabolites [reduced HAL (R-HAL), 3-(4-fluorobenzoyl)propionic acid (FBPA) and 4-(4-chlorophenyl)-4-hydroxypiperidine (CPHP)] and two related compounds [spiperone (SPI) and droperidol (DRO)] in phosphate-buffered saline using high-performance liquid chromatography (HPLC) coupled with dual ultraviolet detection (220 and 250 nm). Retention times of HAL, R-HAL, FBPA, CPHP, SPI and DRO were 16.8, 11.8, 10.2, 4.1, 12.6 and 8.3 min, respectively. Their lower limits of detection were 7.5, 14, 4.5, 12, 10 and 20 ng/mL in the same order. The coefficients of variation for their intra- and inter-day assays were less than 7.8 and 9.4%, respectively. Of the other centrally acting drugs, only amoxapine interfered with the peak of DRO. Using our procedure, the binding study of tested compounds to synthetic melanin, human serum albumin and alpha1-acid glycoprotein was performed by determining the unbound concentration to total concentration ratio. These results indicated that simultaneous assay of HAL, R-HAL, FBPA, CPHP, SPI and DRO in phosphate-buffered saline by HPLC equipped with dual ultraviolet detection is simple, sensitive and reproducible. Also, our assay system can be applied to the binding study of these compounds to synthetic melanin, human serum albumin and alpha1-acid glycoprotein.     

Photophysics and biological applications of the environment-sensitive fluorophore 6-N,N-dimethylamino-2,3-naphthalimide

We have synthesized a new environment-sensitive fluorophore, 6-N,N-dimethylamino-2,3-naphthalimide (6DMN). This chromophore exhibits valuable fluorescent properties as a biological probe with emission in the 500-600 nm range and a marked response to changes in the environment polarity. The 6DMN fluorescence is red-shifted in polar protic environments, with the maximum emission intensity shifting more than 100 nm from 491 nm in toluene to 592 nm in water. Additionally, the fluorescence quantum yield decreases more than 100-fold from chloroform (Phi = 0.225) to water (Phi = 0.002). The scope and applications of the 6DMN probe are expanded with the synthesis of an Fmoc-protected amino acid derivative (5), which contains the fluorophore. This unnatural amino acid has been introduced into several peptides, demonstrating that it can be manipulated under standard solid-phase peptide synthesis conditions. Peptides incorporating the new residue can be implemented for monitoring protein-protein interactions as exemplified in studies with Src homology 2 (SH2) phosphotyrosine binding domains. The designed peptides exhibit a significant increase in the quantum yield of the long wavelength fluorescence emission band (596 nm) upon binding to selected SH2 domains (e.g., Crk SH2, Abl SH2, and PI3K SH2). The peptides can be used as ratiometric sensors, since the short wavelength band (460 nm) was found almost invariable throughout the titrations.     

Stability-indicating methods for determination of tiapride in pure form, pharmaceutical preparation, and human plasma

Four different stability-indicating procedures are described for determination of tiapride in pure form, dosage form, and human plasma. Second derivative (D2), first derivative of ratio spectra (1DD), spectrofluorimetric, and high-performance column liquid chromatographic (LC) methods are proposed for determination of tiapride in presence of its acid-induced degradation products, namely 2-methoxy-5-(methylsulfonyl) benzoic acid and 2-diethylaminoethylamine. These approaches were successfully applied to quantify tiapride using the information included in the absorption, excitation, and emission spectra of the appropriate solutions. In the D2 method, Beer's law was obeyed in the concentration range of 1.5-9 microg/mL with a mean recovery of 99.94 +/- 1.38% at 253.4 nm using absolute ethanol as a solvent. In 1DD, which is based on the simultaneous use of the first derivative of ratio spectra and measurement at 245 nm in absolute ethanolic solution, Beer's law was obeyed over a concentration range of 1.5-9 microg/mL with mean recovery 99.64 +/- 1.08%. The spectrofluorimetric method is based on the determination of tiapride native fluorescence at 339 nm emission wavelength and 230 nm excitation wavelength using water-methanol (8 + 2, v/v). The calibration curve was linear over the range of 0.2-3 microg/mL with mean recovery of 99.66 +/- 1.46%. This method was also applied for determination of tiapride in human plasma. A reversed-phase LC method performed at ambient temperature was validated for determination of tiapride using methanol-deionized water-triethylamine (107 + 93 + 0.16, v/v/v) as the mobile phase. Sulpiride was used as an internal standard at a flow rate of 1 mL/min with ultraviolet detection at 214 nm. A linear relation was obtained over a concentration range of 2-30 microg/mL with mean recovery of 99.66 +/- 0.9%. Results were statistically analyzed and compared with those obtained by applying the reference method. They proved both accuracy and precision.     

浓硫酸颜色反应荧光分析法测定甲芬那酸

提出了浓硫酸颜色反应用于甲芬那酸荧光测定的新方法.甲芬那酸为弱荧光物质,与浓硫酸反应后荧光显著增强.体系最大激发波长和最大发射波长分别为385.0和471.9nm,甲芬那酸浓度在9.0×10-9～7.5×10-5 g·mL-1范围内与荧光强度呈良好的线性关系,方法检出限为3.1×10-9 g· mL-1,回收率为99.3％ ～ 102％.方法操作简单,灵敏度高,选择性好,用于甲芬那酸胶囊中甲芬那酸含量测定,结果满意.     

First fluorescent photoinduced electron transfer (PET) reagent for hydroperoxides

A novel fluorescent reagent for hydroperoxides, 4-(2-diphenylphosphinoethylamino)-7-nitro-2,1,3-benzoxadiazole (1), was developed on the basis of the method for designing photoinduced electron transfer (PET) reagents having a benzofurazan skeleton. Compound 1 was quantitatively reacted with hydroperoxides to give its fluorescent derivative, 2. In acetonitrile, the Phi value (0.44) of 2 was 31 times greater than that of 1. The long excitation (458 nm) and emission (520 nm) wavelengths of 2 are suitable for the determination of hydroperoxides, especially in biosamples. [structure: see text]     

流动注射在线氧化荧光法结合透析采样研究盐酸硫利达嗪与牛血清白蛋白的结合作用

利用流动注射在线氧化结合在线透析采样技术建立了荧光法测定血浆中游离盐酸硫利达嗪的新方法, 并将其应用于盐酸硫利达嗪与牛血清白蛋白作用机制的研究. 将盐酸硫利达嗪与牛血清白蛋白以不同比例混合并在37 ℃下培养, 以流动注射透析采样技术从混合液中分离出游离盐酸硫利达嗪, 在线氧化为强荧光化合物后测定其浓度; 应用Scrathard方程分析所测数据, 求得盐酸硫利达嗪和牛血清白蛋白的结合常数为1.2×104 L/mol, 结合位点数为0.98; 根据热力学参数推断, 盐酸硫利达嗪与牛血清白蛋白之间以疏水作用力为主; 进一步基于荧光猝灭现象和Fster非辐射能量转移理论, 得到盐酸硫利达嗪小分子与牛血清白蛋白之间的能量转移效率(E=0.497)和结合距离(r0=3.27 nm).     

高效液相色谱-荧光检测法测定食品接触材料塑料制品中荧光增白剂

建立了同时测定食品接触材料塑料制品(食品包装袋)中荧光增白剂的高效液相色谱-荧光检测法。样品用20 mL三氯甲烷作提取剂,超声提取30 min,提取温度为40 ℃,用高效液相色谱进行定性定量分析。采用Eclipse XDB-C18(250 mm×4.6 mm, 5 μm)为分析柱,以5 mmol/L乙酸铵溶液和乙腈为流动相,梯度洗脱,荧光激发波长为350 nm,发射波长为430 nm。结果显示,4种荧光增白剂4,4′-双［2-(邻氰苯基)乙烯基］苯(1,4-bis(4-cyanostyryl)benzene, C.I. 199)、1,4-双(2-苯并恶唑)萘(1,4-bis (2-benzoxazolyl)naphthalene, C.I. 367)、4,4′-双(2-甲氧苯乙烯基)联苯(4,4′-bis(2-methoxystyryl)biphenyl, C.I. 378)和2,5-双(5-叔丁基-2-苯并恶唑基)噻吩(2,5-thiophenediylbis (5-tert-butyl-1,3-benzoxazole), C.I. 184)可以较好地分离;检出限(S/N=3)分别为0.3、0.1、0.05、0.14 mg/L,定量限(S/N=10)分别为1.0、0.4、0.2、0.5 mg/L,回收率范围为78.9%～101.1%,相对标准偏差小于10%,线性关系良好。该法简便、结果准确、灵敏度高,能够满足进出口食品包装材料塑料制品中荧光增白剂的日常检测。     

Highly sensitive spectrofluorimetric determination of ephedrine hydrochloride in pharmaceutical preparations

A sensitive and specific spectrofluorimetry method was developed and validated for the quantification of ephedrine (EP) in pharmaceutical preparations. The method is based on the fluorescent enhancing reaction of EP with 7-chloro-4-nitrobenzofurazan (NBD-C1; derivatization reagent), in borate buffer of pH 9 to yield a yellow, fluorescent product. Under these experimental conditions, the derivatized product of EP had excitation and emission wavelength maxima at 458 and 516 nm, respectively. The linear range of this method was 20-2500 ng/mL. The detection limit was 7.3 ng/mL EP. Intra- and interday precisions of the assay at 3 concentrations within this range were 0.037-1.77%. The low relative standard deviation values indicate good precision, and high recovery values indicate excellent accuracy of the method. The proposed method was applied to the determination of the examined drugs in pharmaceutical formulations, and the results indicate that the method is equally as accurate, precise, and reproducible as the official method.     

Near infra-red reflectance spectroscopic determination of metformin in tablets

A rapid and simple near infra red reflectance spectroscopic method was described for determination of anti-diabetic tablets. Partial least squares method was applied to the Savitsky-Golay smoothed first derivative spectral data revealed over wavelength range 1000-2500 nm from 11 different pulverized tablet batches in 2-mm quartz cell. The results were agreed well with those obtained by the official British Pharmacopoiea 1998 UV assay of metformin.     

Determination of menadione sodium bisulfite in pharmaceutical preparations by flow-injection on-line photochemical spectrofluorometry.

A flow-injection on-line photochemical spectrofluorometry (FI-PF) was developed for the determination of menadione sodium bisulfite (MSB) using acetone and sodium sulfite as sensitizing reagents. An injected sample band carried by a water stream was on-line merged with a mixed NaOH, Na2SO3 and acetone solution in a "T" connector. It was then driven to pass a knotted PTFE photochemical reactor (0.5 mm i.d. x 200 cm, KR) that was freely coiled around a 6-W low-pressure mercury lamp. While passing the KR, MSB was derived into an intensively fluorescent compound that was on-line delivered into a flow-through cell and detected therein at an emission wavelength of 459 nm and an excitation wavelength of 336 nm. Under optimized conditions a detection limit of 0.38 microg l(-1) was achieved at a sampling rate of 90 h(-1). Eleven determinations of 0.5 mg l(-1) and 0.05 mg l(-1) MSB standard solution gave RSDs of 0.75% and 1.3%, respectively. The calibration curve was linear in the MSB concentration range 0.005-1.5 mg l(-1). The proposed method was successfully applied to assay the MSB content in MSB injection.