Entropy analysis of unsteady magneto-nanofluid flow past accelerating stretching sheet with convective boundary condition

The unsteady laminar magnetohydrodynamics(MHD) boundary layer flow and heat transfer of nanofluids over an accelerating convectively heated stretching sheet are numerically studied in the presence of a transverse magnetic field with heat source/sink. The unsteady governing equations are solved by a shooting method with the Runge-KuttaFehlberg scheme. Three different types of water based nanofluids, containing copper, aluminium oxide, and titanium dioxide, are taken into consideration. The effects of the pertinent parameters on the fluid velocity, the temperature, the entropy generation number, the Bejan number, the shear stress, and the heat transfer rate at the sheet surface are graphically and quantitatively discussed in detail. A comparison of the entropy generation due to the heat transfer and the fluid friction is made with the help of the Bejan number. It is observed that the presence of the metallic nanoparticles creates more entropy in the nanofluid flow than in the regular fluid flow.     

Effect of Richardson number on entropy generation over backward facing step

The flow over a backward facing step (BFS) has been taken as a useful prototype to investigate intrinsic mechanisms of separated flow with heat transfer. However, to date, the open literature on the effect of Richardson number on entropy generation over the BFS is absent yet, although the flow pattern and heat transfer characteristic both will receive significant influence caused by the variation of Richardson number in many practical applications, such as in microelectromechanical systems and aerocrafts. The effect of Richardson number on entropy generation in the BFS flow is reported in this paper for the first time. The entropy generation analysis is conducted through numerically solving the entropy generation equation. The velocity and temperature, which are the inputs of the entropy generation equation, are evaluated by the lattice Boltzmann method. It is found that the distributions of local entropy generation number and Bejan number are significantly influenced by the variation of Richardson number. The total entropy generation number is a monotonic decreasing function of Richardson number, whereas the average Bejan number is a monotonic increasing function of Richardson number.     

MHD graphene-polydimethylsiloxane Maxwell nanofluid flow in a squeezing channel with thermal radiation effects

The magnetohydrodynamic (MHD) graphene-polydimethylsiloxane (PDMS) nanofluid flow between two squeezing parallel plates in the presence of thermal radiation effects is investigated. The energy efficiency of the system via the Bejan number is studied extensively. The governing partial differential equations are converted by using the similarity transformations into a set of coupled ordinary differential equations. The set of these converted equations is solved by using the differential transform method (DTM).The entropy generation in terms of the Bejan number, the coefficient of skin-friction, and the heat transfer rate is furthermore investigated under the effects of various physical parameters of interest. The present study shows that the Bejan number, the velocity and thermal profiles, and the rate of heat transfer decrease with a rise in the Deborah number De while the skin-friction coefficient increases. It is also observed that the entropy generation due to frictional forces is higher than that due to thermal effects. Thus, the study bears the potential application in powder technology as well as in biomedical engineering.     

Entropy generation analysis of natural convective radiative second grade nanofluid flow between parallel plates in a porous medium

The present article explores the entropy generation of radiating viscoelastic second grade nanofluid in a porous channel confined between two parallel plates. The boundaries of the plates are maintained at distinct temperatures and concentrations while the fluid is being sucked and injected periodically through upper and lower plates. The buoyancy forces, thermophoresis and Brownian motion are also considered due to the temperature and concentration differences across the channel. The system of governing partial differential equations has been transferred into a system of ordinary differential equations(ODEs) by appropriate similarity relations, and a shooting method with the fourth-order Runge-Kutta scheme is used for the solutions. The results are analyzed in detail for dimensionless velocity components. The temperature, concentration distributions, the entropy generation number, and the Bejan number corresponding to various fluid and geometric parameters are shown graphically. The skin friction, heat and mass transfer rates are presented in the form of tables. It is noticed that the temperature profile of the fluid is enhanced with the Brownian motion, whereas the concentration profile of the fluid is decreased with the thermophoresis parameter, and the entropy and Bejan numbers exhibit the opposite trend for the suction and injection ratio.     

Entropy generation effects in a hydromagnetic free convection flow past a vertical oscillating plate

An unsteady free convective flow of a viscous fluid past an oscillating plate is considered, and the effects of entropy generation are investigated. The governing partial differential equations are normalized by using suitable transformations, and an exact solution of the problem is obtained by using the Laplace transformation technique. The expressions for the velocity and temperature are then used to compute the skin friction, Nusselt number, local entropy generation number, and Bejan number.     

Heat transfer and entropy generation analysis of non-Newtonian fluid flow through vertical microchannel with convective boundary condition

The entropy generation and heat transfer characteristics of magnetohydrodynamic(MHD) third-grade fluid flow through a vertical porous microchannel with a convective boundary condition are analyzed. Entropy generation due to flow of MHD non-Newtonian third-grade fluid within a microchannel and temperature-dependent viscosity is studied using the entropy generation rate and Vogel's model. The equations describing flow and heat transport along with boundary conditions are first made dimensionless using proper non-dimensional transformations and then solved numerically via the finite element method(FEM). An appropriate comparison is made with the previously published results in the literature as a limiting case of the considered problem.The comparison confirms excellent agreement. The effects of the Grashof number, the Hartmann number, the Biot number, the exponential space-and thermal-dependent heat source(ESHS/THS) parameters, and the viscous dissipation parameter on the temperature and velocity are studied and presented graphically. The entropy generation and the Bejan number are also calculated. From the comprehensive parametric study, it is recognized that the production of entropy can be improved with convective heating and viscous dissipation aspects. It is also found that the ESHS aspect dominates the THS aspect.     

Effects of temperature-dependent viscosity variation on entropy generation,heat and fluid flow through a porous-saturated duct of rectangular cross-section

Effect of temperature-dependent viscosity on fully developed forced convection in a duct of rectangular cross-section occupied by a fluid-saturated porous medium is investigated analytically. The Darcy flow model is applied and the viscosity-temperature relation is assumed to be an inverse-linear one. The case of uniform heat flux on the walls, i.e. the H boundary condition in the terminology of Kays and Crawford [12], is treated. For the case of a fluid whose viscosity decreases with temperature, it is found that the effect of the variation is to increase the Nusselt number for heated walls. Having found the velocity and the temperature distribution, the second law of thermodynamics is invoked to find the local and average entropy generation rate. Expressions for the entropy generation rate, the Bejan number, the heat transfer irreversibility, and the fluid flow irreversibility are presented in terms of the Brinkman number, the Peclet number, the viscosity variation number, the dimensionless wall heat flux, and the aspect ratio (width to height ratio). These expressions let a parametric study of the problem based on which it is observed that the entropy generated due to flow in a duct of square cross-section is more than those of rectangular counterparts while increasing the aspect ratio decreases the entropy generation rate similar to what previously reported for the clear flow case by Ratts and Raut [14].     

Entropy analysis in electrical magnetohydrodynamic(MHD) flow of nanofluid with effects of thermal radiation,viscous dissipation,and chemical reaction

The unsteady mixed convection flow of electrical conducting nanofluid and heat transfer due to a permeable linear stretching sheet with the combined effects of an electric field, magnetic field, thermal radiation, viscous dissipation, and chemical reaction have been investigated. A similarity transformation is used to transform the constitutive equations into a system of nonlinear ordinary differential equations.The resultant system of equations is then solved numerically using implicit finite difference method.The velocity, temperature, concentration, entropy generation, and Bejan number are obtained with the dependence of different emerging parameters examined. It is noticed that the velocity is more sensible with high values of electric field and diminished with a magnetic field. The radiative heat transfer and viscous dissipation enhance the heat conduction in the system. Moreover, the impact of mixed convection parameter and Buoyancy ratio parameter on Bejan number profile has reverse effects. A chemical reaction reduced the nanoparticle concentration for higher values.     

Effects of viscous dissipation and heat generation (absorption) in a thermal boundary layer of a non-Newtonian fluid over a continuously moving permeable flat plate

The problem of boundary-layer flow and heat transfer of a non-Newtonian power-law fluid over a moving porous infinite flat plate in the presence of viscous dissipation and heat generation or absorption is investigated analytically. It is assumed that both the momentum and the energy equations are coupled by the stress friction factor, and an assumption is introduced regarding the heat-transfer index. It is found that exact analytical solutions for velocity and temperature exist only for pseudoplastic fluids in the presence of suction at the surface. The effects of the suction parameter, Eckert number, and the heat generation or absorption parameter on the velocity and temperature profiles, as well as on the skin-friction coefficient and Nusselt number are discussed.     

Entropy generation during fluid flow in a channel under the effect of transverse magnetic field

Entropy generation due to fluid flow and heat transfer inside a horizontal channel made of two parallel plates under the effect of transverse magnetic field is numerically investigated. The flow is assumed to be steady, laminar, hydro-dynamically and thermally fully developed of electrically conducting fluid. Both horizontal walls are maintained at constant temperatures higher than that of the fluid. The governing equations in Cartesian coordinate are solved by an implicit finite difference technique. After the flow field and the temperature distributions are obtained, the entropy generation profiles are computed and presented graphically. The factors, which were found to affect the problem under consideration are the magnetic parameter, Eckert number, Prandtl number, and the temperature parameter (θ_∞). It was found that, entropy generation increased as all parameters involved in the present problem increased.     

Entropy generation and natural convection in square cavities with wavy walls

The aim of the present work is to study the entropy generation in the natural convection process in square cavities with hot wavy walls through numerical simulations for different undulations and Rayleigh numbers, while keeping the Prandtl number constant. The results show that the hot wall geometry affects notably the heat transfer rate in the cavity. It has been found in the present numerical study that the mean Nusselt number in the case of heat transfer in a cavity with wavy walls is lower, as compared to heat transfer in a cavity without undulations. Based on the obtained dimensionless velocity and temperature values, the distributions of the local entropy generation due to heat transfer and fluid friction, the local Bejan number, and the local entropy generation are determined and plotted for different undulations and Rayleigh numbers. The study is performed for Rayleigh numbers 10³ < Ra < 10⁵, irreversibility coefficients 10^?4 < φ < 10^?2, and Prandtl numbers Pr = 0.71. The total entropy generation is found to increase with increasing undulation number.     

Flow of colloidal suspension and irreversibility analysis with aggregation kinematics of nanoparticles in a microchannel

The current exploration focuses on the ethylene glycol (EG) based nanoliquid flow in a microchannel. The effectiveness of the internal heat source and linear radiation is reflected in the present investigation. The estimation of suitable thermal conductivity model has affirmative impact on the convective heat transfer phenomenon. The examination is conceded with the nanoparticle aggregation demonstrated by the MaxwellBruggeman and Krieger-Dougherty models which tackle the formation of nanolayer. These models effectively describe the thermal conductivity and viscosity correspondingly. The dimensionless mathematical expressions are solved numerically by the Runge Kutta Fehlberg approach. A higher thermal field is attained for the Bruggeman model due to the formation of thermal bridge. A second law analysis is carried out to predict the sources of irreversibility associated with the thermal system. It is remarked that lesser entropy generation is obtained for the aggregation model. The entropy generation rate declines with the slip flow and the thermal heat flux. A notable enhancement in the Bejan number is attained by increasing the Biot number. It is established that the nanoparticle aggragation model exhibits a higher Bejan number in comparision with the usual flow model.     

Oberbeck convection flow of a couple stress fluid through a vertical porous stratum

The flow and heat transfer characteristics of Oberbeck convection of a couple stress fluid in a vertical porous stratum is investigated. The perturbation method of solution is obtained in terms of buoyancy parameter N valid for small values of N. This limitation is relaxed through numerical solutions using the finite difference technique with an error of 0.1×10^-7. The effect of increase in the values of temperature difference between the plates, permeability parameter and couple stress parameter on velocity, temperature, mass flow rate, skin friction and rate of heat transfer are reported. A new achievement is explored to analyse the flow for strong, weak and comparable porosity with the couple stress parameter. It is noted that both the porous parameter and the couple stress parameter suppress the flow. Higher-temperature difference is required to achieve the mass flow rate equivalent to that of viscous flow.     

Second law analysis of the 2D laminar flow of two-immiscible,incompressible viscous fluids in a channel

The laminar and fully developed flows of two immiscible fluids confined in a thin slit of constant wall heat fluxes are analyzed in terms of entropy generations due to irreversibility of forced convection heat transfer. The governing equations are analytically derived using expressions for velocity distributions. The derived equation for the dimensionless entropy generation number is used to interpret the relative importance of frictions to conduction by varying irreversibility distribution ratio ϕ. It is found that the minimum entropy generation takes place at the dimensionless half transverse distance (ξ) of 0.3 for values of ϕ higher than zero. The entropy generation near the plate increases more rapidly in fluid I than in fluid II as viscous dissipation effects becomes more important. The velocity profiles are found to be in agreement with the distributions of the dimensionless entropy generation number (N _S ) for two-immiscible incompressible flows in the slit.     

The effect of variable viscosity on the entropy generation and pumping power in a laminar fluid flow through a duct subjected to constant heat flux

Entropy generation and pumping power required for a laminar viscous flow in a duct subjected to constant heat flux has been investigated. The temperature dependence of the viscosity is taken into consideration. The ratio of pumping power to total heat flux decreases considerably and entropy generation increases along the duct length for viscous fluids. Therefore, it is shown that an optimum duct length may be obtained which minimizes total energy losses due to both entropy generation and pumping power. For low heat-flux conditions, entropy generation due to viscous friction becomes dominant and the dependence of viscosity on temperature must be considered in order to determine entropy generation accurately. Received on 17 May 1999     

Natural convection flow of a couple stress fluid between two vertical parallel plates with Hall and ion-slip effects

The Hall and ion-slip effects on fully developed electrically conducting couple stress fluid flow between vertical parallel plates in the presence of a temperature dependent heat source are investigated. The governing non-linear partial differential equations are transformed into a system of ordinary differential equations using similarity transformations. The resulting equations are then solved using the homotopy analysis method (HAM). The effects of the magnetic parameter, Hall parameter, ion-slip parameter and couple stress fluid parameter on velocity and temperature are discussed and shown graphically.     

Entropy analysis for viscoelastic magnetohydrodynamic flow over a stretching surface

This paper presents the application of the second law analysis of thermodynamics to viscoelastic magnetohydrodynamic flow over a stretching surface. The velocity and temperature profiles are obtained analytically using the Kummer's functions and used to compute the entropy generation number. The effects of the magnetic parameter, the Prandtl number, the heat source/heat sink parameter and the surface temperature parameter on velocity and temperature profiles are presented. The influences of the same parameters, the Hartmann number, the dimensionless group parameter and the Reynolds number on the entropy generation are also discussed.     

Flow of couple stress fluid with variable thermal conductivity

The steady flow and heat transfer of a couple stress fluid due to an inclined stretching cylinder are analyzed. The thermal conductivity is assumed to be temperature dependent. The governing equations for the flow and heat transfer are transformed into ordinary differential equations. Series solutions of the resulting problem are computed. The effects of various interested parameters, e.g., the couple stress parameter, the angle of inclination, the mixed convection parameter, the Prandtl number, the Reynolds number, the radiation parameter, and the variable thermal conductivity parameter, are illustrated. The skin friction coefficient and the local Nusselt number are computed and analyzed. It is observed that the heat transfer rate at the surface increases while the velocity and the shear stress decrease when the couple stress parameter and the Reynolds number increase. The temperature increases when the Reynolds number increases.     

Heat and Mass Transfer in MHD Micropolar Flow Over a Vertical Moving Porous Plate in a Porous Medium

An analysis is presented for the problem of free convection with mass transfer flow for a micropolar fluid via a porous medium bounded by a semi-infinite vertical porous plate in the presence of a transverse magnetic field. The plate moves with constant velocity in the longitudinal direction, and the free stream velocity follows an exponentially small perturbation law. A uniform magnetic field acts perpendicularly to the porous surface in which absorbs the micropolar fluid with a suction velocity varying with time. Numerical results of velocity distribution of micropolar fluids are compared with the corresponding flow problems for a Newtonian fluid. Also, the results of the skin-friction coefficient, the couple stress coefficient, the rate of the heat and mass transfers at the wall are prepared with various values of fluid properties and flow conditions.     

Transient free convection with mass transfer MHD micropolar fluid in a porous plate by the network method

The transient problem of coupled heat and mass transfer of a micropolar fluid in magneto‐hydrodynamic free convection from a vertical infinite porous plate with an exponentially decaying heat generating considering the viscous dissipation and ohmic heating effects is studied. Joule heating must be considered when the viscous dissipation and the Prandtl number are large. The non‐dimensional equations for the conservation of mass, momentum, energy and concentration are solved by means a numerical technique based on electric analogy (network simulation method). This method provides the numerical response of the system by running the network in circuit resolution software with the solution to both transient and steady‐state problems at the same time, and its programming does not require manipulation of the sophisticated mathematical software that is inherent in other numerical methods. The effects of the material parameters, viscous dissipation, internal generation and Joule heating on velocity, angular momentum and temperature fields across the boundary layer are investigated. In addition, the skin‐friction coefficient, couple stress coefficient, Nusselt number and Sherwood number are shown in tabular form. The numerical results for velocity and temperature distributions of micropolar fluids are compared with the corresponding flow problems for a Newtonian fluid. Copyright © 2007 John Wiley & Sons, Ltd.