化学反应对竖直平板边界磁流体动力学微极流体滑流的影响

Heat and mass transfer effects on the unsteady flow of a micropolar fluid through a porous medium bounded by a semi-infinite vertical plate in a slip-flow regime are studied taking into account a homogeneous chemical reaction of the first order. A uniform magnetic field acts perpendicular to the porous surface absorb micropolar fluid with a suction velocity varying with time. The free stream velocity follows an exponentially increasing or decreasing small perturbation law. Using the approximate method, the expressions for the velocity microrotation, temperature, and concentration are obtained. Futher, the results of the skin friction coefficient, the couple stress coefficient, and the rate of heat and mass transfer at the wall are presented with various values of fluid properties and flow conditions.     

Unsteady MHD natural convection from a heated vertical porous plate in a micropolar fluid with Joule heating,chemical reaction and radiation effects

The effects of Joule-heating, chemical reaction and thermal radiation on unsteady MHD natural convection from a heated vertical porous plate in a micropolar fluid are analyzed. The partial differential equations governing the flow and heat and mass transfer have been solved numerically using an implicit finite-difference scheme. The case corresponding to vanishing of the anti-symmetric part of the stress tensor that represents weak concentrations is considered. The numerical results are validated by favorable comparisons with previously published results. A parametric study of the governing parameters, namely the magnetic field parameter, suction/injection parameter, radiation parameter, chemical reaction parameter, vortex viscosity parameter and the Eckert number on the linear velocity, angular velocity, temperature and the concentration profiles as well as the skin friction coefficient, wall couple stress coefficient, Nusselt number and the Sherwood number is conducted. A selected set of numerical results is presented graphically and discussed.     

MHD free-convective flow of micropolar and Newtonian fluids through porous medium in a vertical channel

We have studied the fully-developed free-convective flow of an electrically conducting fluid in a vertical channel occupied by porous medium under the influence of transverse magnetic field. The internal prefecture of the channel is divided into two regions; one region filled with micropolar fluid and the other region with a Newtonian fluid or both the regions filled by Newtonian fluids. Analytical solutions of the governing equations of fluid flow are found to be in excellent agreement with analytical prediction. Analytical results for the details of the velocity, micro-rotation velocity and temperature fields are shown through graphs for various values of physical parameters. It is noticed that Newtonian fluids prop up the linear velocity of the fluid in contrast to micropolar fluid. Also the skin friction coefficient at both the walls is derived and its numerical values are offered through tables.     

Transient free convection with mass transfer MHD micropolar fluid in a porous plate by the network method

The transient problem of coupled heat and mass transfer of a micropolar fluid in magneto‐hydrodynamic free convection from a vertical infinite porous plate with an exponentially decaying heat generating considering the viscous dissipation and ohmic heating effects is studied. Joule heating must be considered when the viscous dissipation and the Prandtl number are large. The non‐dimensional equations for the conservation of mass, momentum, energy and concentration are solved by means a numerical technique based on electric analogy (network simulation method). This method provides the numerical response of the system by running the network in circuit resolution software with the solution to both transient and steady‐state problems at the same time, and its programming does not require manipulation of the sophisticated mathematical software that is inherent in other numerical methods. The effects of the material parameters, viscous dissipation, internal generation and Joule heating on velocity, angular momentum and temperature fields across the boundary layer are investigated. In addition, the skin‐friction coefficient, couple stress coefficient, Nusselt number and Sherwood number are shown in tabular form. The numerical results for velocity and temperature distributions of micropolar fluids are compared with the corresponding flow problems for a Newtonian fluid. Copyright © 2007 John Wiley & Sons, Ltd.     

Combined heat and mass transfer by mixed convection MHD flow along a porous plate with chemical reaction in presence of heat source

An exact and a numerical solutions to the problem of a steady mixed convective MHD flow of an incompressible viscous electrically conducting fluid past an infinite vertical porous plate with combined heat and mass transfer are presented.A uniform magnetic field is assumed to be applied transversely to the direction of the flow with the consideration of the induced magnetic field with viscous and magnetic dissipations of energy.The porous plate is subjected to a constant suction velocity as well as a uniform mixed stream velocity.The governing equations are solved by the perturbation technique and a numerical method.The analytical expressions for the velocity field,the temperature field,the induced magnetic field,the skin-friction,and the rate of heat transfer at the plate are obtained.The numerical results are demonstrated graphically for various values of the parameters involved in the problem.The effects of the Hartmann number,the chemical reaction parameter,the magnetic Prandtl number,and the other parameters involved in the velocity field,the temperature field,the concentration field,and the induced magnetic field from the plate to the fluid are discussed.An increase in the heat source/sink or the Eckert number is found to strongly enhance the fluid velocity values.The induced magnetic field along the x-direction increases with the increase in the Hartmann number,the magnetic Prandtl number,the heat source/sink,and the viscous dissipation.It is found that the flow velocity,the fluid temperature,and the induced magnetic field decrease with the increase in the destructive chemical reaction.Applications of the study arise in the thermal plasma reactor modelling,the electromagnetic induction,the magnetohydrodynamic transport phenomena in chromatographic systems,and the magnetic field control of materials processing.     

State space approach to unsteady magnetohydrodynamics natural convection heat and mass transfer through a porous medium saturated with a viscoelastic fluid

A technique of the state space approach and the inversion of the Laplace transform method are applied to dimensionless equations of an unsteady one-dimensional boundary-layer flow due to heat and mass transfer through a porous medium saturated with a viscoelastic fluid bounded by an infinite vertical plate in the presence of a uniform magnetic field is described. Complete analytical solutions for the temperature, concentration, velocity, and induced magnetic and electric fields are presented. The inversion of the Laplace transforms is carried out by using a numerical approach. The proposed method is used to solve two problems: boundary-layer flow in a viscoelastic fluid near a vertical wall subjected to the initial conditions of a stepwise temperature and concentration and viscoelastic fluid flow between two vertical walls. The solutions are found to be dependent on the governing parameters including the Prandtl number, the Schmidt number, the Grashof number, reaction rate coefficient, viscoelastic parameter, and permeability of the porous medium. Effects of these major parameters on the transport behavior are investigated methodically, and typical results are illustrated to reveal the tendency of the solutions. Representative results are presented for the velocity, temperature, concentration, and induced magnetic and electric field distributions, as well as the local skin-friction coefficient and the local Nusselt and Sherwood numbers.     

Unsteady free convection flow over an infinite vertical porous plate due to the combined effects of thermal and mass diffusion,magnetic field and Hall currents

The unsteady free convection flow over an infinite vertical porous plate, which moves with time-dependent velocity in an ambient fluid, has been studied. The effects of the magnetic field and Hall current are included in the analysis. The buoyancy forces arise due to both the thermal and mass diffusion. The partial differential equations governing the flow have been solved numerically using both the implicit finite difference scheme and the difference-differential method. For the steady case, analytical solutions have also been obtained. The effect of time variation on the skin friction, heat transfer and mass transfer is very significant. Suction increases the skin friction coefficient in the primary flow, and also the Nusselt and Sherwood numbers, but the skin friction coefficient in the secondary flow is reduced. The effect of injection is opposite to that of suction. The buoyancy force, injection and the Hall parameter induce an overshoot in the velocity profiles in the primary flow which changes the velocity gradient from a negative to a positive value, but the magnetic field and suction reduce this velocity overshoot.     

Hall and Porous Boundaries Effects on Peristaltic Transport Through Porous Medium of a Maxwell Model

Peristaltic motion induced by sinusoidal traveling wave of incompressible, electrically conducting Maxwell fluid in the porous walls of a two-dimensional channel through a porous medium has been investigated in the presence of a constant magnetic field. The Hall effect has been taken into account. Modified Darcy??s law has been used in the flow modeling. The fluid entering the flow region through one plate is considered at the same rate as it is leaving through the other plate. The problem is formulated using a perturbation expansion in terms of small amplitude ratio. We have discussed the problem only for free pumping case. This work can be considered as mathematical modeling to the case of gall bladder with stones. Finally, the effects of various parameters of interest are discussed and shown graphically.     

Homotopy Solutions for a Generalized Second-Grade Fluid Past a Porous Plate

The flow of a second-grade fluid past a porous plate subject to either suction or blowing at the plate has been studied. A modified model of second-grade fluid that has shear-dependent viscosity and can predict the normal stress difference is used. The differential equations governing the flow are solved using homotopy analysis method (HAM). Expressions for the velocity have been constructed and discussed with the help of graphs. Analysis of the obtained results showed that the flow is appreciably influenced by the material and normal stress coefficient. Several results of interest are deduced as the particular cases of the presented analysis.     

Flow of a Weakly Conducting Fluid in a Channel Filled with a Porous Medium

We investigate the fully developed flow in a fluid-saturated porous medium channel with an electrically conducting fluid under the action of a parallel Lorentz force. The Lorentz force varies exponentially in the vertical direction due to low fluid electrical conductivity and the special arrangement of the magnetic and electric fields at the lower plate. Exact analytical solutions are derived for fluid velocity and the results are presented in figures. All these flows are new and are presented for the first time in the literature.     

Nonsimilar boundary-layer flow over a stationary permeable plate in a rotating fluid with a magnetic field

Summary  The nonsimilar boundary-layer flow and heat transfer over a stationary permeable surface in a rotating fluid in the presence of magnetic field, mass transfer and free stream velocity are studied. The parabolic partial differential equations governing the flow have been solved numerically by using a difference–differential method. For small streamwise distance, these partial differential equations are also solved by a perturbation technique with Shanks transformation. For uniform mass transfer, analytical solutions are obtained. The surface skin friction coefficients and the Nusselt number increase with the magnetic field, suction and streamwise distance from the leading edge of the plate except the skin friction coefficient in the y-direction which decreases with the increasing magnetic field. Received 4 December 2001; accepted for publication 24 September 2002     

Non-Darcy Mixed Convection in a Vertical Porous Channel with Boundary Conditions of Third Kind

Combined free and forced convection flow in a parallel plate vertical channel filled with porous matrix is analyzed in the fully developed region with boundary conditions of third kind. The flow is modeled using the Brinkman?CForchheimer-extended Darcy equations. The plates exchange heat with an external fluid. Both conditions of equal and different reference temperatures of the external fluid are considered. Governing equations are solved numerically by shooting technique that uses classical explicit Runge?CKutta scheme and Newton?CRaphson method as a correction scheme and analytically using perturbation series method for Darcy model. The velocity field, the temperature field and Nusselt numbers are obtained for governing parameters such as porous parameter, inertia term and perturbation parameter for equal and unequal Biot numbers and are displayed graphically. The dimensionless mean velocity and bulk temperature are also determined. It is found that the numerical solutions agree for small values of the perturbation parameter in the absence of the inertial forces.     

Two-phase fluid flow in a porous tube: a model for blood flow in capillaries

A theoretical study of blood flow, under the influence of a body force, in a capillary is presented. Blood is modeled as a two-phase fluid consisting of a core region of suspension of all erythrocytes, represented by a micropolar fluid and a plasma layer free from cells modeled as a Newtonian fluid. The capillary is modeled as a porous tube consisting of a thin transition Brinkman layer overlying a porous Darcy region. Analytical expressions for the pressure, microrotation, and velocities for the different regions are given. Plots of pressure, microrotation, and velocities for varying micropolar parameters, hydraulic resistivity, and Newtonian fluid layer thickness are presented. The overall system was found to be sensitive to variations in micropolar coupling number. It was also discovered that high values of hydraulic resistivity result in an overall slower velocity of the micropolar and Newtonian fluid.     

Variable fluid properties and thermal radiation effects on flow and heat transfer in micropolar fluid film past moving permeable infinite flat plate with slip velocity

This work deals with the influence of thermal radiation on the problem of the mixed convection thin film flow and heat transfer of a micropolar fluid past a moving infinite vertical porous flat plate with a slip velocity.The fluid viscosity and the thermal conductivity are assumed to be the functions of temperature.The equations governing the flow are solved numerically by the Chebyshev spectral method for some representative value of various parameters.In comparison with the previously published work,the excellent agreement is shown.The effects of various parameters on the velocity,the microrotation velocity,and the temperature profiles,as well as the skin-friction coefficient and the Nusselt number,are plotted and discussed.     

Effect of the rotation,magnetic field and initial stress on peristaltic motion of micropolar fluid

In this work, the effect of magnetic field, rotation and initial stress on peristaltic motion of micropolar fluid in a circular cylindrical flexible tube with viscoelastic or elastic wall properties has been considered. Runge–Kutta technique are used. Runge–Kutta method is developed to solve the governing equations of motion resulting from a perturbation technique for small values of amplitude ratio. The time mean axial velocity profiles are presented for the case of free pumping and analyzed to observe the influence of wall properties, magnetic field, rotation and initial stress for various values of micropolar fluid parameters. In the case of viscoelastic wall, the effect of viscous damping on mean flow reversal at the boundary is seen. The numerical results of the time mean velocity profile are discussed in detail for homogeneous fluid under the effect of wall properties, magnetic field, initial stress and rotation for different cases by figures. The results indicate that the effect of wall properties, rotation, initial stress and magnetic field are very pronounced. Numerical results are given and illustrated graphically.     

MHD flow and heat transfer of micropolar fluid between two porous disks

A numerical study is carried out for the axisymmetric steady laminar incompressible flow of an electrically conducting micropolar fluid between two infinite parallel porous disks with the constant uniform injection through the surface of the disks. The fluid is subjected to an external transverse magnetic field. The governing nonlinear equations of motion are transformed into a dimensionless form through von Karman’s similarity transformation. An algorithm based on a finite difference scheme is used to solve the reduced coupled ordinary differential equations under associated boundary conditions. The effects of the Reynolds number, the magnetic parameter, the micropolar parameter, and the Prandtl number on the flow velocity and temperature distributions are discussed. The results agree well with those of the previously published work for special cases. The investigation predicts that the heat transfer rate at the surfaces of the disks increases with the increases in the Reynolds number, the magnetic parameter, and the Prandtl number. The shear stresses decrease with the increase in the injection while increase with the increase in the applied magnetic field. The shear stress factor is lower for micropolar fluids than for Newtonian fluids, which may be beneficial in the flow and thermal control in the polymeric processing.     

Lubrication theory for micropolar fluids and its application to a journal bearing with finite length

In this paper, the field equation of micropolar fluid with general lubrication theory assumptions is simplified into two systems of coupled ordinary differential equation. The analytical solutions of velocity and microrotation velocity are obtained. Micropolar fluid lubrication Reynolds equation is deduced. By means of numerical method, the characteristics of a finitely long journal bearing under various dynamic parameters, geometrical parameters and micropolar parameters are shown in curve form. These characteristics are pressure distribution, load capacity, coefficient of flow flux and coefficient of friction. Practical value of micropolar effects is shown, so micropolar fluid theory further closes to engineering application.     

MHD stagnation point flow of a micropolar fluid towards a moving surface with radiation

The effects of magnetic field and thermal radiation on a micropolar fluid flow near a stagnation point towards a moving surface are investigated. Numerical solutions for the transformed non-linear ordinary differential equations are obtained using the fourth order Rung-Kutta integration scheme coupled with the shooting method. The effects of the magnetic parameter, the material parameter, the radiation parameter and the Prandtl number on the velocity, angular velocity and temperature profiles are displayed graphically and investigated. Also the numerical values of the local skin-friction coefficient and the Nusselt number for various values of the physical parameters are entered in tabular form and discussed.     

Slip effects on heat and mass transfer in MHD micropolar fluid flow over an inclined plate with thermal radiation and chemical reaction

The influence of partial slip, thermal radiation, chemical reaction and temperature‐dependent fluid properties on heat and mass transfer in hydro‐magnetic micropolar fluid flow over an inclined permeable plate with constant heat flux and non‐uniform heat source/sink is studied. The transverse magnetic field is assumed as a function of the distance from the origin. Also it is assumed that the fluid viscosity and the thermal conductivity vary as an inverse function and linear function of temperature, respectively. With the use of the similarity transformation, the governing system of non‐linear partial differential equations are transformed into non‐linear ordinary differential equations and are solved numerically using symbolic software MATHEMATICA 7.0 (Wolfram Research, Champaign, IL). The numerical values obtained for the velocity, microrotation, temperature, species concentration, skin friction coefficient and the Nusselt number are presented through graphs and tables for several sets of values of the parameters. The effects of various physical parameters on the flow and heat transfer characteristics are discussed.Copyright © 2011 John Wiley & Sons, Ltd.     

Hydromagnetic simultaneous heat and mass transfer by mixed convection from a vertical plate embedded in a stratified porous medium with thermal dispersion effects

The problem of steady, laminar, hydromagnetic simultaneous heat and mass transfer by mixed convection flow over a vertical plate embedded in a uniform porous medium with a stratified free stream and taking into account the presence of thermal dispersion is investigated for the case of power-law variations of both the wall temperature and concentration. Certain transformations are employed to transform the governing differential equations to a local similarity form. The transformed equations are solved numerically by an efficient implicit, iterative, finite-difference scheme. The obtained results are checked against previously published work on special cases of the problem and are found to be in excellent agreement. A parametric study illustrating the influence of the magnetic field, porous medium inertia effects, heat generation or absorption, lateral wall mass flux, concentration to thermal buoyancy ratio, and the Lewis number on the fluid velocity, temperature and concentration as well as the Nusselt and the Sherwood numbers is conducted. The results of this parametric study is shown graphically and the physical aspects of the problem are discussed. Received on 17 November 1998